Commit 85f6d2db authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'gpio-v3.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:
 "Two patches for the OMAP driver, dealing with setting up IRQs properly
  on the device tree boot path"

* tag 'gpio-v3.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio/omap: auto-setup a GPIO when used as an IRQ
  gpio/omap: maintain GPIO and IRQ usage separately
parents 4ed54764 fac7fa16
......@@ -63,6 +63,7 @@ struct gpio_bank {
struct gpio_chip chip;
struct clk *dbck;
u32 mod_usage;
u32 irq_usage;
u32 dbck_enable_mask;
bool dbck_enabled;
struct device *dev;
......@@ -86,6 +87,9 @@ struct gpio_bank {
#define GPIO_BIT(bank, gpio) (1 << GPIO_INDEX(bank, gpio))
#define GPIO_MOD_CTRL_BIT BIT(0)
#define BANK_USED(bank) (bank->mod_usage || bank->irq_usage)
#define LINE_USED(line, offset) (line & (1 << offset))
static int irq_to_gpio(struct gpio_bank *bank, unsigned int gpio_irq)
{
return bank->chip.base + gpio_irq;
......@@ -420,15 +424,69 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio,
return 0;
}
static void _enable_gpio_module(struct gpio_bank *bank, unsigned offset)
{
if (bank->regs->pinctrl) {
void __iomem *reg = bank->base + bank->regs->pinctrl;
/* Claim the pin for MPU */
__raw_writel(__raw_readl(reg) | (1 << offset), reg);
}
if (bank->regs->ctrl && !BANK_USED(bank)) {
void __iomem *reg = bank->base + bank->regs->ctrl;
u32 ctrl;
ctrl = __raw_readl(reg);
/* Module is enabled, clocks are not gated */
ctrl &= ~GPIO_MOD_CTRL_BIT;
__raw_writel(ctrl, reg);
bank->context.ctrl = ctrl;
}
}
static void _disable_gpio_module(struct gpio_bank *bank, unsigned offset)
{
void __iomem *base = bank->base;
if (bank->regs->wkup_en &&
!LINE_USED(bank->mod_usage, offset) &&
!LINE_USED(bank->irq_usage, offset)) {
/* Disable wake-up during idle for dynamic tick */
_gpio_rmw(base, bank->regs->wkup_en, 1 << offset, 0);
bank->context.wake_en =
__raw_readl(bank->base + bank->regs->wkup_en);
}
if (bank->regs->ctrl && !BANK_USED(bank)) {
void __iomem *reg = bank->base + bank->regs->ctrl;
u32 ctrl;
ctrl = __raw_readl(reg);
/* Module is disabled, clocks are gated */
ctrl |= GPIO_MOD_CTRL_BIT;
__raw_writel(ctrl, reg);
bank->context.ctrl = ctrl;
}
}
static int gpio_is_input(struct gpio_bank *bank, int mask)
{
void __iomem *reg = bank->base + bank->regs->direction;
return __raw_readl(reg) & mask;
}
static int gpio_irq_type(struct irq_data *d, unsigned type)
{
struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
unsigned gpio = 0;
int retval;
unsigned long flags;
unsigned offset;
if (WARN_ON(!bank->mod_usage))
return -EINVAL;
if (!BANK_USED(bank))
pm_runtime_get_sync(bank->dev);
#ifdef CONFIG_ARCH_OMAP1
if (d->irq > IH_MPUIO_BASE)
......@@ -446,7 +504,17 @@ static int gpio_irq_type(struct irq_data *d, unsigned type)
return -EINVAL;
spin_lock_irqsave(&bank->lock, flags);
retval = _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), type);
offset = GPIO_INDEX(bank, gpio);
retval = _set_gpio_triggering(bank, offset, type);
if (!LINE_USED(bank->mod_usage, offset)) {
_enable_gpio_module(bank, offset);
_set_gpio_direction(bank, offset, 1);
} else if (!gpio_is_input(bank, 1 << offset)) {
spin_unlock_irqrestore(&bank->lock, flags);
return -EINVAL;
}
bank->irq_usage |= 1 << GPIO_INDEX(bank, gpio);
spin_unlock_irqrestore(&bank->lock, flags);
if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
......@@ -603,35 +671,19 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
* If this is the first gpio_request for the bank,
* enable the bank module.
*/
if (!bank->mod_usage)
if (!BANK_USED(bank))
pm_runtime_get_sync(bank->dev);
spin_lock_irqsave(&bank->lock, flags);
/* Set trigger to none. You need to enable the desired trigger with
* request_irq() or set_irq_type().
* request_irq() or set_irq_type(). Only do this if the IRQ line has
* not already been requested.
*/
_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
if (bank->regs->pinctrl) {
void __iomem *reg = bank->base + bank->regs->pinctrl;
/* Claim the pin for MPU */
__raw_writel(__raw_readl(reg) | (1 << offset), reg);
}
if (bank->regs->ctrl && !bank->mod_usage) {
void __iomem *reg = bank->base + bank->regs->ctrl;
u32 ctrl;
ctrl = __raw_readl(reg);
/* Module is enabled, clocks are not gated */
ctrl &= ~GPIO_MOD_CTRL_BIT;
__raw_writel(ctrl, reg);
bank->context.ctrl = ctrl;
if (!LINE_USED(bank->irq_usage, offset)) {
_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
_enable_gpio_module(bank, offset);
}
bank->mod_usage |= 1 << offset;
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
......@@ -640,31 +692,11 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
{
struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
void __iomem *base = bank->base;
unsigned long flags;
spin_lock_irqsave(&bank->lock, flags);
if (bank->regs->wkup_en) {
/* Disable wake-up during idle for dynamic tick */
_gpio_rmw(base, bank->regs->wkup_en, 1 << offset, 0);
bank->context.wake_en =
__raw_readl(bank->base + bank->regs->wkup_en);
}
bank->mod_usage &= ~(1 << offset);
if (bank->regs->ctrl && !bank->mod_usage) {
void __iomem *reg = bank->base + bank->regs->ctrl;
u32 ctrl;
ctrl = __raw_readl(reg);
/* Module is disabled, clocks are gated */
ctrl |= GPIO_MOD_CTRL_BIT;
__raw_writel(ctrl, reg);
bank->context.ctrl = ctrl;
}
_disable_gpio_module(bank, offset);
_reset_gpio(bank, bank->chip.base + offset);
spin_unlock_irqrestore(&bank->lock, flags);
......@@ -672,7 +704,7 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
* If this is the last gpio to be freed in the bank,
* disable the bank module.
*/
if (!bank->mod_usage)
if (!BANK_USED(bank))
pm_runtime_put(bank->dev);
}
......@@ -762,10 +794,20 @@ static void gpio_irq_shutdown(struct irq_data *d)
struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
unsigned int gpio = irq_to_gpio(bank, d->hwirq);
unsigned long flags;
unsigned offset = GPIO_INDEX(bank, gpio);
spin_lock_irqsave(&bank->lock, flags);
bank->irq_usage &= ~(1 << offset);
_disable_gpio_module(bank, offset);
_reset_gpio(bank, gpio);
spin_unlock_irqrestore(&bank->lock, flags);
/*
* If this is the last IRQ to be freed in the bank,
* disable the bank module.
*/
if (!BANK_USED(bank))
pm_runtime_put(bank->dev);
}
static void gpio_ack_irq(struct irq_data *d)
......@@ -897,13 +939,6 @@ static int gpio_input(struct gpio_chip *chip, unsigned offset)
return 0;
}
static int gpio_is_input(struct gpio_bank *bank, int mask)
{
void __iomem *reg = bank->base + bank->regs->direction;
return __raw_readl(reg) & mask;
}
static int gpio_get(struct gpio_chip *chip, unsigned offset)
{
struct gpio_bank *bank;
......@@ -922,13 +957,22 @@ static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
{
struct gpio_bank *bank;
unsigned long flags;
int retval = 0;
bank = container_of(chip, struct gpio_bank, chip);
spin_lock_irqsave(&bank->lock, flags);
if (LINE_USED(bank->irq_usage, offset)) {
retval = -EINVAL;
goto exit;
}
bank->set_dataout(bank, offset, value);
_set_gpio_direction(bank, offset, 0);
exit:
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
return retval;
}
static int gpio_debounce(struct gpio_chip *chip, unsigned offset,
......@@ -1400,7 +1444,7 @@ void omap2_gpio_prepare_for_idle(int pwr_mode)
struct gpio_bank *bank;
list_for_each_entry(bank, &omap_gpio_list, node) {
if (!bank->mod_usage || !bank->loses_context)
if (!BANK_USED(bank) || !bank->loses_context)
continue;
bank->power_mode = pwr_mode;
......@@ -1414,7 +1458,7 @@ void omap2_gpio_resume_after_idle(void)
struct gpio_bank *bank;
list_for_each_entry(bank, &omap_gpio_list, node) {
if (!bank->mod_usage || !bank->loses_context)
if (!BANK_USED(bank) || !bank->loses_context)
continue;
pm_runtime_get_sync(bank->dev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment