m68k: Assorted spelling fixes

  - s/acccess/access/
  - s/accoding/according/
  - s/addad/added/
  - s/addreess/address/
  - s/allocatiom/allocation/
  - s/Assember/Assembler/
  - s/compactnes/compactness/
  - s/conneced/connected/
  - s/decending/descending/
  - s/diectly/directly/
  - s/diplacement/displacement/
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
[geert: Squashed, fix arch/m68k/ifpsp060/src/pfpsp.S]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

arch/m68k/coldfire/head.S

@@ -288,7 +288,7 @@ _clear_bss:
 #endif
 
 	/*
-	 *	Assember start up done, start code proper.
+	 *	Assembler start up done, start code proper.
 	 */
 	jsr	start_kernel			/* start Linux kernel */
 

arch/m68k/coldfire/m5272.c

@@ -111,7 +111,7 @@ void __init config_BSP(char *commandp, int size)
 /***************************************************************************/
 
 /*
- * Some 5272 based boards have the FEC ethernet diectly connected to
+ * Some 5272 based boards have the FEC ethernet directly connected to
  * an ethernet switch. In this case we need to use the fixed phy type,
  * and we need to declare it early in boot.
  */

arch/m68k/coldfire/pci.c

@@ -42,7 +42,7 @@ static unsigned long iospace;
 
 /*
  * We need to be carefull probing on bus 0 (directly connected to host
- * bridge). We should only acccess the well defined possible devices in
+ * bridge). We should only access the well defined possible devices in
  * use, ignore aliases and the like.
  */
 static unsigned char mcf_host_slot2sid[32] = {

arch/m68k/ifpsp060/src/fpsp.S

@@ -10191,7 +10191,7 @@ xdnrm_con:
 xdnrm_sd:
 	mov.l		%a1,-(%sp)
 	tst.b		LOCAL_EX(%a0)		# is denorm pos or neg?
-	smi.b		%d1			# set d0 accodingly
+	smi.b		%d1			# set d0 accordingly
 	bsr.l		unf_sub
 	mov.l		(%sp)+,%a1
 xdnrm_exit:
@@ -10990,7 +10990,7 @@ src_qnan_m:
 # routines where an instruction is selected by an index into
 # a large jump table corresponding to a given instruction which
 # has been decoded. Flow continues here where we now decode
-# further accoding to the source operand type.
+# further according to the source operand type.
 #
 
 	global		fsinh
@@ -23196,14 +23196,14 @@ m_sign:
 #
 #  1. Branch on the sign of the adjusted exponent.
 #  2p.(positive exp)
-#   2. Check M16 and the digits in lwords 2 and 3 in decending order.
+#   2. Check M16 and the digits in lwords 2 and 3 in descending order.
 #   3. Add one for each zero encountered until a non-zero digit.
 #   4. Subtract the count from the exp.
 #   5. Check if the exp has crossed zero in #3 above; make the exp abs
 #	   and set SE.
 #	6. Multiply the mantissa by 10**count.
 #  2n.(negative exp)
-#   2. Check the digits in lwords 3 and 2 in decending order.
+#   2. Check the digits in lwords 3 and 2 in descending order.
 #   3. Add one for each zero encountered until a non-zero digit.
 #   4. Add the count to the exp.
 #   5. Check if the exp has crossed zero in #3 above; clear SE.

arch/m68k/ifpsp060/src/pfpsp.S

@@ -13156,14 +13156,14 @@ m_sign:
 #
 #  1. Branch on the sign of the adjusted exponent.
 #  2p.(positive exp)
-#   2. Check M16 and the digits in lwords 2 and 3 in decending order.
+#   2. Check M16 and the digits in lwords 2 and 3 in descending order.
 #   3. Add one for each zero encountered until a non-zero digit.
 #   4. Subtract the count from the exp.
 #   5. Check if the exp has crossed zero in #3 above; make the exp abs
 #	   and set SE.
 #	6. Multiply the mantissa by 10**count.
 #  2n.(negative exp)
-#   2. Check the digits in lwords 3 and 2 in decending order.
+#   2. Check the digits in lwords 3 and 2 in descending order.
 #   3. Add one for each zero encountered until a non-zero digit.
 #   4. Add the count to the exp.
 #   5. Check if the exp has crossed zero in #3 above; clear SE.

arch/m68k/include/asm/dma.h

@@ -18,7 +18,7 @@
  * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000
  *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
  *
- * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000
+ * AUG/25/2000 : added support for 8, 16 and 32-bit Single-Address-Mode (K)2000
  *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
  *
  * APR/18/2002 : added proper support for MCF5272 DMA controller.

arch/m68k/include/asm/m525xsim.h

@@ -123,10 +123,10 @@
 /*
  *	I2C module.
  */
-#define MCFI2C_BASE0		(MCF_MBAR + 0x280)	/* Base addreess I2C0 */
+#define MCFI2C_BASE0		(MCF_MBAR + 0x280)	/* Base address I2C0 */
 #define MCFI2C_SIZE0		0x20			/* Register set size */
 
-#define MCFI2C_BASE1		(MCF_MBAR2 + 0x440)	/* Base addreess I2C1 */
+#define MCFI2C_BASE1		(MCF_MBAR2 + 0x440)	/* Base address I2C1 */
 #define MCFI2C_SIZE1		0x20			/* Register set size */
 
 /*

arch/m68k/include/asm/mcfmmu.h

@@ -38,7 +38,7 @@
 /*
  *	MMU Operation register.
  */
-#define	MMUOR_UAA	0x00000001		/* Update allocatiom address */
+#define	MMUOR_UAA	0x00000001		/* Update allocation address */
 #define	MMUOR_ACC	0x00000002		/* TLB access */
 #define	MMUOR_RD	0x00000004		/* TLB access read */
 #define	MMUOR_WR	0x00000000		/* TLB access write */

arch/m68k/include/asm/q40_master.h

 /*
  * Q40 master Chip Control
- * RTC stuff merged for compactnes..
+ * RTC stuff merged for compactness.
 */
 
 #ifndef _Q40_MASTER_H

arch/m68k/mac/iop.c

@@ -60,7 +60,7 @@
  *
  * The host talks to the IOPs using a rather simple message-passing scheme via
  * a shared memory area in the IOP RAM. Each IOP has seven "channels"; each
- * channel is conneced to a specific software driver on the IOP. For example
+ * channel is connected to a specific software driver on the IOP. For example
  * on the SCC IOP there is one channel for each serial port. Each channel has
  * an incoming and and outgoing message queue with a depth of one.
  *

arch/m68k/math-emu/fp_decode.h

@@ -130,7 +130,7 @@ do_fscc=0
 	bfextu	%d2{#13,#3},%d0
 .endm
 
-| decode the 8bit diplacement from the brief extension word
+| decode the 8bit displacement from the brief extension word
 .macro	fp_decode_disp8
 	move.b	%d2,%d0
 	ext.w	%d0