Merge branch 'be2net-next'

Sathya Perla says:

====================
be2net: patch set

Patch 1 fixes the driver to workaournd a bug in the Lancer FW in the
vlan-config cmd processing. The FW in some cases clears the vlan-promisc
setting even if it cannot apply the vlan filter. The driver has no means
of knowing if the vlan-promisc setting has been cleared or not. This
patch now explicitly clears the vlan-promisc setting via the RX-Filter cmd
and then tries to program the vlan-list.

Patch 2 fixes the failure path in the vlan vid add code.
The driver currently removes a new vid from the adapter->vids[] array if
be_vid_config() returns an error, which occurs when there is an error in
HW/FW. This is wrong. After the HW/FW error is recovered from, we need the
complete vids[] array to re-program the vlan list.

Patch 3 fixes the ndo_set_rx_mode() path to avoid unnecessary multicast
list updates to the FW. Each time the ndo_set_rx_mode() routine is called,
the driver programs the multicast list in the adapter without checking
if there are any changes to the list. This leads to a flood of RX_FILTER
cmds when a number of vlan interfaces are configured over the device,
as the ndo_ gets called for each vlan interface. To avoid this, we now
use __dev_mc_sync() and __dev_uc_sync() API, but only to detect if there
is a change in the mc/uc lists. Now that we use this API, the code has to
be-designed to issue these API calls for each invocation of the ndo_ call.

Patch 4 replaces polling with sleeping in the FW completion path.
The ndo_set_rx_mode() and ndo_add/del_vxlan_port() calls may be called with
BHs disabled. The driver currently issues the required cmds to the FW in
these contexts and polls on completions from the FW, while BHs remain
disabled.  This can cause either packet loss or packet reception to be
delayed on that CPU.  This patch defers processing of the above cmds to a
separate workqueue. With this change, FW cmds are now issued only in process
context. Now that the FW cmds are issued only in process context, they can
sleep waiting for a completion instead of polling.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/emulex/benet/be.h

@@ -508,6 +508,10 @@ struct be_wrb_params {
 	u16 lso_mss;	/* MSS for LSO */
 };
 
+struct be_eth_addr {
+	unsigned char mac[ETH_ALEN];
+};
+
 struct be_adapter {
 	struct pci_dev *pdev;
 	struct net_device *netdev;
@@ -523,7 +527,7 @@ struct be_adapter {
 	struct be_dma_mem mbox_mem_alloced;
 
 	struct be_mcc_obj mcc_obj;
-	spinlock_t mcc_lock;	/* For serializing mcc cmds to BE card */
+	struct mutex mcc_lock;	/* For serializing mcc cmds to BE card */
 	spinlock_t mcc_cq_lock;
 
 	u16 cfg_num_rx_irqs;		/* configured via set-channels */
@@ -570,9 +574,15 @@ struct be_adapter {
 	int if_handle;		/* Used to configure filtering */
 	u32 if_flags;		/* Interface filtering flags */
 	u32 *pmac_id;		/* MAC addr handle used by BE card */
+	struct be_eth_addr *uc_list;/* list of uc-addrs programmed (not perm) */
 	u32 uc_macs;		/* Count of secondary UC MAC programmed */
+	struct be_eth_addr *mc_list;/* list of mcast addrs programmed */
+	u32 mc_count;
 	unsigned long vids[BITS_TO_LONGS(VLAN_N_VID)];
 	u16 vlans_added;
+	bool update_uc_list;
+	bool update_mc_list;
+	struct mutex rx_filter_lock;/* For protecting vids[] & mc/uc_list[] */
 
 	u32 beacon_state;	/* for set_phys_id */
 
@@ -626,6 +636,15 @@ struct be_adapter {
 	u8 phy_state; /* state of sfp optics (functional, faulted, etc.,) */
 };
 
+/* Used for defered FW config cmds. Add fields to this struct as reqd */
+struct be_cmd_work {
+	struct work_struct work;
+	struct be_adapter *adapter;
+	union {
+		__be16 vxlan_port;
+	} info;
+};
+
 #define be_physfn(adapter)		(!adapter->virtfn)
 #define be_virtfn(adapter)		(adapter->virtfn)
 #define sriov_enabled(adapter)		(adapter->flags &	\