mfd: move drivers/i2c/chips/tps65010.c to drivers/mfd

Move the tps65010 driver from drivers/i2c/chips to drivers/mfd
since it's more of a multi-function device than anything else,
and since Jean is trying to vanish drivers/i2c/chips ASAP.

One way to think of these chips are as the PMIC family most
used with OMAP1 generation chips.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>

drivers/i2c/chips/Kconfig

@@ -126,19 +126,6 @@ config ISP1301_OMAP
 	  This driver can also be built as a module.  If so, the module
 	  will be called isp1301_omap.
 
-config TPS65010
-	tristate "TPS6501x Power Management chips"
-	depends on GPIOLIB
-	default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
-	help
-	  If you say yes here you get support for the TPS6501x series of
-	  Power Management chips.  These include voltage regulators,
-	  lithium ion/polymer battery charging, and other features that
-	  are often used in portable devices like cell phones and cameras.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called tps65010.
-
 config SENSORS_MAX6875
 	tristate "Maxim MAX6875 Power supply supervisor"
 	depends on EXPERIMENTAL

drivers/i2c/chips/Makefile

@@ -19,7 +19,6 @@ obj-$(CONFIG_SENSORS_PCF8574)	+= pcf8574.o
 obj-$(CONFIG_PCF8575)		+= pcf8575.o
 obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
 obj-$(CONFIG_ISP1301_OMAP)	+= isp1301_omap.o
-obj-$(CONFIG_TPS65010)		+= tps65010.o
 obj-$(CONFIG_MENELAUS)		+= menelaus.o
 obj-$(CONFIG_SENSORS_TSL2550)	+= tsl2550.o
 obj-$(CONFIG_MCU_MPC8349EMITX)	+= mcu_mpc8349emitx.o

drivers/mfd/Kconfig

@@ -69,6 +69,19 @@ config UCB1400_CORE
 	  To compile this driver as a module, choose M here: the
 	  module will be called ucb1400_core.
 
+config TPS65010
+	tristate "TPS6501x Power Management chips"
+	depends on I2C && GPIOLIB
+	default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
+	help
+	  If you say yes here you get support for the TPS6501x series of
+	  Power Management chips.  These include voltage regulators,
+	  lithium ion/polymer battery charging, and other features that
+	  are often used in portable devices like cell phones and cameras.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called tps65010.
+
 config TWL4030_CORE
 	bool "Texas Instruments TWL4030/TPS659x0 Support"
 	depends on I2C=y && GENERIC_HARDIRQS

drivers/mfd/Makefile

@@ -19,6 +19,8 @@ wm8350-objs			:= wm8350-core.o wm8350-regmap.o wm8350-gpio.o
 obj-$(CONFIG_MFD_WM8350)	+= wm8350.o
 obj-$(CONFIG_MFD_WM8350_I2C)	+= wm8350-i2c.o
 
+obj-$(CONFIG_TPS65010)		+= tps65010.o
+
 obj-$(CONFIG_TWL4030_CORE)	+= twl4030-core.o twl4030-irq.o
 
 obj-$(CONFIG_MFD_CORE)		+= mfd-core.o
@@ -33,4 +35,4 @@ obj-$(CONFIG_MCP_UCB1200)	+= ucb1x00-assabet.o
 endif
 obj-$(CONFIG_UCB1400_CORE)	+= ucb1400_core.o
 
-obj-$(CONFIG_PMIC_DA903X)	+= da903x.o
\ No newline at end of file
+obj-$(CONFIG_PMIC_DA903X)	+= da903x.o