Skip to content

L
linux
Commit 8866d756 authored by Alan Cox's avatar Alan Cox Committed by Linus Torvalds
Browse files
Options

[PATCH] sk98 vendor driver update

parent b7158553
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 20647 additions and 9764 deletions
drivers/net/Kconfig
View file @ 8866d756
......@@ -2043,32 +2043,204 @@ config R8169
recommended. The module will be called r8169.
config SK98LIN
tristate "SysKonnect SK-98xx support"
tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support"
depends on PCI
---help---
Say Y here if you have a SysKonnect SK-98xx Gigabit Ethernet Server
Adapter. The following adapters are supported by this driver:
- SK-9841 (single link 1000Base-LX)
- SK-9842 (dual link 1000Base-LX)
- SK-9843 (single link 1000Base-SX)
- SK-9844 (dual link 1000Base-SX)
- SK-9821 (single link 1000Base-T)
- SK-9822 (dual link 1000Base-T)
- SK-9861 (single link Volition connector)
- SK-9862 (dual link Volition connector)
The driver also supports the following adapters from Allied Telesyn:
- AT2970...
The dual link adapters support a link-failover feature. Read
<file:Documentation/networking/sk98lin.txt> for information about
Say Y here if you have a Marvell Yukon or SysKonnect SK-98xx/SK-95xx
compliant Gigabit Ethernet Adapter. The following adapters are supported
by this driver:
- 3Com 3C940 Gigabit LOM Ethernet Adapter
- 3Com 3C941 Gigabit LOM Ethernet Adapter
- Allied Telesyn AT-2970SX Gigabit Ethernet Adapter
- Allied Telesyn AT-2970LX Gigabit Ethernet Adapter
- Allied Telesyn AT-2970TX Gigabit Ethernet Adapter
- Allied Telesyn AT-2971SX Gigabit Ethernet Adapter
- Allied Telesyn AT-2971T Gigabit Ethernet Adapter
- Allied Telesyn AT-2970SX/2SC Gigabit Ethernet Adapter
- Allied Telesyn AT-2970LX/2SC Gigabit Ethernet Adapter
- Allied Telesyn AT-2970TX/2TX Gigabit Ethernet Adapter
- N-Way PCI-Bus Giga-Card 1000/100/10Mbps(L)
- DGE-530T Gigabit Ethernet Adapter
- EG1032 v2 Instant Gigabit Network Adapter
- EG1064 v2 Instant Gigabit Network Adapter
- Marvell RDK-8001 Adapter
- Marvell RDK-8002 Adapter
- Marvell RDK-8003 Adapter
- Marvell RDK-8004 Adapter
- Marvell RDK-8006 Adapter
- Marvell RDK-8007 Adapter
- Marvell RDK-8008 Adapter
- Marvell RDK-8009 Adapter
- Marvell RDK-8011 Adapter
- Marvell RDK-8012 Adapter
- Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
- SK-9821 Gigabit Ethernet Server Adapter (SK-NET GE-T)
- SK-9822 Gigabit Ethernet Server Adapter (SK-NET GE-T dual link)
- SK-9841 Gigabit Ethernet Server Adapter (SK-NET GE-LX)
- SK-9842 Gigabit Ethernet Server Adapter (SK-NET GE-LX dual link)
- SK-9843 Gigabit Ethernet Server Adapter (SK-NET GE-SX)
- SK-9844 Gigabit Ethernet Server Adapter (SK-NET GE-SX dual link)
- SK-9861 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition)
- SK-9862 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition dual link)
- SK-9871 Gigabit Ethernet Server Adapter (SK-NET GE-ZX)
- SK-9872 Gigabit Ethernet Server Adapter (SK-NET GE-ZX dual link)
- SK-9521 V2.0 10/100/1000Base-T Adapter
- SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T Adapter
- SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter
- SK-9843 V2.0 Gigabit Ethernet 1000Base-SX Adapter
- SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter
- SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter
- SK-9871 V2.0 Gigabit Ethernet 1000Base-ZX Adapter
- SK-9521 10/100/1000Base-T Adapter
The adapters support Jumbo Frames.
The dual link adapters support link-failover and dual port features.
Both Marvell Yukon and SysKonnect SK-98xx/SK-95xx adapters support
the scatter-gather functionality with sendfile(). Please refer to
Documentation/networking/sk98lin.txt for more information about
optional driver parameters.
Questions concerning this driver may be addressed to:
linux@syskonnect.de
linux@syskonnect.de
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. This is
recommended. The module will be called sk98lin.
say M here and read Documentation/modules.txt. This is recommended.
The module will be called sk98lin.o.
config CONFIG_SK98LIN_T1
bool "3Com 3C940/3C941 Gigabit Ethernet Adapter"
depends on SK98LIN
help
This driver supports:
- 3Com 3C940 Gigabit LOM Ethernet Adapter
- 3Com 3C941 Gigabit LOM Ethernet Adapter
Questions concerning this driver may be addressed to:
linux@syskonnect.de
config CONFIG_SK98LIN_T2
bool "Allied Telesyn AT-29xx Gigabit Ethernet Adapter"
depends on SK98LIN
help
This driver supports:
- Allied Telesyn AT-2970SX Gigabit Ethernet Adapter
- Allied Telesyn AT-2970LX Gigabit Ethernet Adapter
- Allied Telesyn AT-2970TX Gigabit Ethernet Adapter
- Allied Telesyn AT-2971SX Gigabit Ethernet Adapter
- Allied Telesyn AT-2971T Gigabit Ethernet Adapter
- Allied Telesyn AT-2970SX/2SC Gigabit Ethernet Adapter
- Allied Telesyn AT-2970LX/2SC Gigabit Ethernet Adapter
- Allied Telesyn AT-2970TX/2TX Gigabit Ethernet Adapter
Questions concerning this driver may be addressed to:
linux@syskonnect.de
config CONFIG_SK98LIN_T3
bool "CNet N-Way Gigabit Ethernet Adapter"
depends on SK98LIN
help
This driver supports:
- N-Way PCI-Bus Giga-Card 1000/100/10Mbps(L)
Questions concerning this driver may be addressed to:
linux@syskonnect.de
config CONFIG_SK98LIN_T4
bool "D-Link DGE-530T Gigabit Ethernet Adapter"
depends on SK98LIN
help
This driver supports:
- DGE-530T Gigabit Ethernet Adapter
Questions concerning this driver may be addressed to:
linux@syskonnect.de
config CONFIG_SK98LIN_T5
bool "Linksys EG10xx Ethernet Server Adapter"
depends on SK98LIN
help
This driver supports:
- EG1032 v2 Instant Gigabit Network Adapter
- EG1064 v2 Instant Gigabit Network Adapter
Questions concerning this driver may be addressed to:
linux@syskonnect.de
config CONFIG_SK98LIN_T6
bool "Marvell RDK-80xx Adapter"
depends on SK98LIN
help
This driver supports:
- Marvell RDK-8001 Adapter
- Marvell RDK-8002 Adapter
- Marvell RDK-8003 Adapter
- Marvell RDK-8004 Adapter
- Marvell RDK-8006 Adapter
- Marvell RDK-8007 Adapter
- Marvell RDK-8008 Adapter
- Marvell RDK-8009 Adapter
- Marvell RDK-8011 Adapter
- Marvell RDK-8012 Adapter
Questions concerning this driver may be addressed to:
linux@syskonnect.de
config CONFIG_SK98LIN_T7
bool "Marvell Yukon Gigabit Ethernet Adapter"
depends on SK98LIN
help
This driver supports:
- Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
Questions concerning this driver may be addressed to:
linux@syskonnect.de
config CONFIG_SK98LIN_T8
bool "SysKonnect SK-98xx Server Gigabit Adapter"
depends on SK98LIN
help
This driver supports:
- SK-9821 Gigabit Ethernet Server Adapter (SK-NET GE-T)
- SK-9822 Gigabit Ethernet Server Adapter (SK-NET GE-T dual link)
- SK-9841 Gigabit Ethernet Server Adapter (SK-NET GE-LX)
- SK-9842 Gigabit Ethernet Server Adapter (SK-NET GE-LX dual link)
- SK-9843 Gigabit Ethernet Server Adapter (SK-NET GE-SX)
- SK-9844 Gigabit Ethernet Server Adapter (SK-NET GE-SX dual link)
- SK-9861 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition)
- SK-9862 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition dual link)
- SK-9871 Gigabit Ethernet Server Adapter (SK-NET GE-ZX)
- SK-9872 Gigabit Ethernet Server Adapter (SK-NET GE-ZX dual link)
Questions concerning this driver may be addressed to:
linux@syskonnect.de
config CONFIG_SK98LIN_T9
bool "SysKonnect SK-98xx V2.0 Gigabit Ethernet Adapter"
depends on SK98LIN
help
This driver supports:
- SK-9521 V2.0 10/100/1000Base-T Adapter
- SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T Adapter
- SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter
- SK-9843 V2.0 Gigabit Ethernet 1000Base-SX Adapter
- SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter
- SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter
- SK-9871 V2.0 Gigabit Ethernet 1000Base-ZX Adapter
- SK-9521 10/100/1000Base-T Adapter
Questions concerning this driver may be addressed to:
linux@syskonnect.de
config TIGON3
tristate "Broadcom Tigon3 support"
......
drivers/net/sk98lin/Makefile
View file @ 8866d756
......@@ -2,11 +2,32 @@
# Makefile for the SysKonnect SK-98xx device driver.
#
obj-$(CONFIG_SK98LIN) += sk98lin.o
sk98lin-objs := skge.o skaddr.o skgehwt.o skgeinit.o skgepnmi.o skgesirq.o \
ski2c.o sklm80.o skqueue.o skrlmt.o sktimer.o skvpd.o \
skxmac2.o skproc.o skcsum.o
#
# Standalone driver params
# SKPARAM += -DSK_KERNEL_24
# SKPARAM += -DSK_KERNEL_24_26
# SKPARAM += -DSK_KERNEL_26
# SKPARAM += -DSK_KERNEL_22_24
obj-$(CONFIG_SK98LIN) += sk98lin.o
sk98lin-objs := \
skge.o \
skdim.o \
skaddr.o \
skgehwt.o \
skgeinit.o \
skgepnmi.o \
skgesirq.o \
ski2c.o \
sklm80.o \
skqueue.o \
skrlmt.o \
sktimer.o \
skvpd.o \
skxmac2.o \
skproc.o \
skcsum.o
# DBGDEF = \
# -DDEBUG
......@@ -55,4 +76,13 @@ endif
# SK_DBGCAT_DRV_INT_SRC 0x04000000 interrupts sources
# SK_DBGCAT_DRV_EVENT 0x08000000 driver events
EXTRA_CFLAGS += -Idrivers/net/sk98lin -DSK_USE_CSUM $(DBGDEF)
EXTRA_CFLAGS += -Idrivers/net/sk98lin -DSK_USE_CSUM -DGENESIS -DYUKON $(DBGDEF) $(SKPARAM)
clean:
rm -f core *.o *.a *.s
drivers/net/sk98lin/h/lm80.h
View file @ 8866d756
/******************************************************************************
*
* Name: lm80.h
* Project: GEnesis, PCI Gigabit Ethernet Adapter
* Version: $Revision: 1.3 $
* Date: $Date: 1999/11/22 13:41:19 $
* Project: Gigabit Ethernet Adapters, Common Modules
* Version: $Revision: 1.6 $
* Date: $Date: 2003/05/13 17:26:52 $
* Purpose: Contains all defines for the LM80 Chip
* (National Semiconductor).
*
......@@ -11,8 +11,8 @@
/******************************************************************************
*
* (C)Copyright 1998,1999 SysKonnect,
* a business unit of Schneider & Koch & Co. Datensysteme GmbH.
* (C)Copyright 1998-2002 SysKonnect.
* (C)Copyright 2002-2003 Marvell.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -27,6 +27,16 @@
*
* History:
* $Log: lm80.h,v $
* Revision 1.6 2003/05/13 17:26:52 mkarl
* Editorial changes.
*
* Revision 1.5 2003/03/31 07:15:18 mkarl
* Corrected Copyright.
* Editorial changes.
*
* Revision 1.4 2002/04/25 11:04:10 rschmidt
* Editorial changes
*
* Revision 1.3 1999/11/22 13:41:19 cgoos
* Changed license header to GPL.
*
......@@ -53,23 +63,23 @@ extern "C" {
*
* All registers are 8 bit wide
*/
#define LM80_CFG 0x00 /* Configuration Register */
#define LM80_ISRC_1 0x01 /* Interrupt Status Register 1 */
#define LM80_ISRC_2 0x02 /* Interrupt Status Register 2 */
#define LM80_IMSK_1 0x03 /* Interrupt Mask Register 1 */
#define LM80_IMSK_2 0x04 /* Interrupt Mask Register 2 */
#define LM80_CFG 0x00 /* Configuration Register */
#define LM80_ISRC_1 0x01 /* Interrupt Status Register 1 */
#define LM80_ISRC_2 0x02 /* Interrupt Status Register 2 */
#define LM80_IMSK_1 0x03 /* Interrupt Mask Register 1 */
#define LM80_IMSK_2 0x04 /* Interrupt Mask Register 2 */
#define LM80_FAN_CTRL 0x05 /* Fan Devisor/RST#/OS# Register */
#define LM80_TEMP_CTRL 0x06 /* OS# Config, Temp Res. Reg */
/* 0x07 - 0x1f reserved */
/* current values */
#define LM80_VT0_IN 0x20 /* current Voltage 0 value */
#define LM80_VT1_IN 0x21 /* current Voltage 1 value */
#define LM80_VT2_IN 0x22 /* current Voltage 2 value */
#define LM80_VT3_IN 0x23 /* current Voltage 3 value */
#define LM80_VT4_IN 0x24 /* current Voltage 4 value */
#define LM80_VT5_IN 0x25 /* current Voltage 5 value */
#define LM80_VT6_IN 0x26 /* current Voltage 6 value */
#define LM80_TEMP_IN 0x27 /* current temperature value */
#define LM80_VT0_IN 0x20 /* current Voltage 0 value */
#define LM80_VT1_IN 0x21 /* current Voltage 1 value */
#define LM80_VT2_IN 0x22 /* current Voltage 2 value */
#define LM80_VT3_IN 0x23 /* current Voltage 3 value */
#define LM80_VT4_IN 0x24 /* current Voltage 4 value */
#define LM80_VT5_IN 0x25 /* current Voltage 5 value */
#define LM80_VT6_IN 0x26 /* current Voltage 6 value */
#define LM80_TEMP_IN 0x27 /* current Temperature value */
#define LM80_FAN1_IN 0x28 /* current Fan 1 count */
#define LM80_FAN2_IN 0x29 /* current Fan 2 count */
/* limit values */
......@@ -91,8 +101,8 @@ extern "C" {
#define LM80_THOT_LIM_LO 0x39 /* hot temperature limit (low) */
#define LM80_TOS_LIM_UP 0x3a /* OS temperature limit (high) */
#define LM80_TOS_LIM_LO 0x3b /* OS temperature limit (low) */
#define LM80_FAN1_COUNT_LIM 0x3c /* Fan 1 count limit (high) */
#define LM80_FAN2_COUNT_LIM 0x3d /* Fan 2 count limit (low) */
#define LM80_FAN1_COUNT_LIM 0x3c /* Fan 1 count limit (high) */
#define LM80_FAN2_COUNT_LIM 0x3d /* Fan 2 count limit (low) */
/* 0x3e - 0x3f reserved */
/*
......@@ -111,23 +121,23 @@ extern "C" {
/* LM80_ISRC_1 Interrupt Status Register 1 */
/* LM80_IMSK_1 Interrupt Mask Register 1 */
#define LM80_IS_VT0 (1<<0) /* limit exceeded for Voltage 0 */
#define LM80_IS_VT1 (1<<1) /* limit exceeded for Voltage 1 */
#define LM80_IS_VT2 (1<<2) /* limit exceeded for Voltage 2 */
#define LM80_IS_VT3 (1<<3) /* limit exceeded for Voltage 3 */
#define LM80_IS_VT4 (1<<4) /* limit exceeded for Voltage 4 */
#define LM80_IS_VT5 (1<<5) /* limit exceeded for Voltage 5 */
#define LM80_IS_VT6 (1<<6) /* limit exceeded for Voltage 6 */
#define LM80_IS_VT0 (1<<0) /* limit exceeded for Voltage 0 */
#define LM80_IS_VT1 (1<<1) /* limit exceeded for Voltage 1 */
#define LM80_IS_VT2 (1<<2) /* limit exceeded for Voltage 2 */
#define LM80_IS_VT3 (1<<3) /* limit exceeded for Voltage 3 */
#define LM80_IS_VT4 (1<<4) /* limit exceeded for Voltage 4 */
#define LM80_IS_VT5 (1<<5) /* limit exceeded for Voltage 5 */
#define LM80_IS_VT6 (1<<6) /* limit exceeded for Voltage 6 */
#define LM80_IS_INT_IN (1<<7) /* state of INT_IN# */
/* LM80_ISRC_2 Interrupt Status Register 2 */
/* LM80_IMSK_2 Interrupt Mask Register 2 */
#define LM80_IS_TEMP (1<<0) /* HOT temperature limit exceeded */
#define LM80_IS_BTI (1<<1) /* state of BTI# pin */
#define LM80_IS_TEMP (1<<0) /* HOT temperature limit exceeded */
#define LM80_IS_BTI (1<<1) /* state of BTI# pin */
#define LM80_IS_FAN1 (1<<2) /* count limit exceeded for Fan 1 */
#define LM80_IS_FAN2 (1<<3) /* count limit exceeded for Fan 2 */
#define LM80_IS_CI (1<<4) /* Chassis Intrusion occurred */
#define LM80_IS_OS (1<<5) /* OS temperature limit exceeded */
#define LM80_IS_CI (1<<4) /* Chassis Intrusion occured */
#define LM80_IS_OS (1<<5) /* OS temperature limit exceeded */
/* bit 6 and 7 are reserved in LM80_ISRC_2 */
#define LM80_IS_HT_IRQ_MD (1<<6) /* Hot temperature interrupt mode */
#define LM80_IS_OT_IRQ_MD (1<<7) /* OS temperature interrupt mode */
......@@ -141,7 +151,7 @@ extern "C" {
#define LM80_FAN_RST_ENA (1<<7) /* sets RST_OUT#/OS# pins in RST mode */
/* LM80_TEMP_CTRL OS# Config, Temp Res. Reg */
#define LM80_TEMP_OS_STAT (1<<0) /* mirrors the state of RST_OUT#/OS# */
#define LM80_TEMP_OS_STAT (1<<0) /* mirrors the state of RST_OUT#/OS# */
#define LM80_TEMP_OS_POL (1<<1) /* select OS# polarity */
#define LM80_TEMP_OS_MODE (1<<2) /* selects Interrupt mode */
#define LM80_TEMP_RES (1<<3) /* selects 9 or 11 bit temp resulution*/
......@@ -181,7 +191,7 @@ extern "C" {
/* LM80_FAN2_COUNT_LIM Fan 2 count limit (low) */
/* 0x3e - 0x3f reserved */
#define LM80_ADDR 0x28 /* LM80 default addr */
#define LM80_ADDR 0x28 /* LM80 default addr */
/* typedefs *******************************************************************/
......
drivers/net/sk98lin/h/skaddr.h
View file @ 8866d756
/******************************************************************************
*
* Name: skaddr.h
* Project: GEnesis, PCI Gigabit Ethernet Adapter
* Version: $Revision: 1.24 $
* Date: $Date: 2001/01/22 13:41:34 $
* Project: Gigabit Ethernet Adapters, ADDR-Modul
* Version: $Revision: 1.29 $
* Date: $Date: 2003/05/13 16:57:24 $
* Purpose: Header file for Address Management (MC, UC, Prom).
*
******************************************************************************/
/******************************************************************************
*
* (C)Copyright 1998-2001 SysKonnect GmbH.
* (C)Copyright 1998-2002 SysKonnect GmbH.
* (C)Copyright 2002-2003 Marvell.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -26,6 +27,24 @@
* History:
*
* $Log: skaddr.h,v $
* Revision 1.29 2003/05/13 16:57:24 mkarl
* Changes for SLIM driver.
* Editorial changes.
*
* Revision 1.28 2003/04/15 09:33:22 tschilli
* Copyright messages changed.
*
* Revision 1.27 2003/04/14 15:55:11 tschilli
* "#error C++ is not yet supported." removed.
*
* Revision 1.26 2002/11/15 07:24:42 tschilli
* SK_ADDR_EQUAL macro fixed.
*
* Revision 1.25 2002/06/10 13:55:18 tschilli
* Changes for handling YUKON.
* All changes are internally and not visible to the programmer
* using this module.
*
* Revision 1.24 2001/01/22 13:41:34 rassmann
* Supporting two nets on dual-port adapters.
*
......@@ -132,7 +151,6 @@
#define __INC_SKADDR_H
#ifdef __cplusplus
#error C++ is not yet supported.
extern "C" {
#endif /* cplusplus */
......@@ -144,7 +162,7 @@ extern "C" {
/* ----- Common return values ----- */
#define SK_ADDR_SUCCESS 0 /* Function returned successfully. */
#define SK_ADDR_ILLEGAL_PORT 100 /* Port number too high. */
#define SK_ADDR_ILLEGAL_PORT 100 /* Port number too high. */
#define SK_ADDR_TOO_EARLY 101 /* Function called too early. */
/* ----- Clear/Add flag bits ----- */
......@@ -198,6 +216,7 @@ extern "C" {
/* Macros */
#ifdef OLD_STUFF
#ifndef SK_ADDR_EQUAL
/*
* "&" instead of "&&" allows better optimization on IA-64.
......@@ -217,6 +236,25 @@ extern "C" {
(*(SK_U32 *)&(((SK_U8 *)(A1))[0]) == *(SK_U32 *)&(((SK_U8 *)(A2))[0])))
#endif /* SK_ADDR_DWORD_COMPARE */
#endif /* SK_ADDR_EQUAL */
#endif /* 0 */
#ifndef SK_ADDR_EQUAL
#ifndef SK_ADDR_DWORD_COMPARE
#define SK_ADDR_EQUAL(A1,A2) ( \
(((SK_U8 SK_FAR *)(A1))[5] == ((SK_U8 SK_FAR *)(A2))[5]) & \
(((SK_U8 SK_FAR *)(A1))[4] == ((SK_U8 SK_FAR *)(A2))[4]) & \
(((SK_U8 SK_FAR *)(A1))[3] == ((SK_U8 SK_FAR *)(A2))[3]) & \
(((SK_U8 SK_FAR *)(A1))[2] == ((SK_U8 SK_FAR *)(A2))[2]) & \
(((SK_U8 SK_FAR *)(A1))[1] == ((SK_U8 SK_FAR *)(A2))[1]) & \
(((SK_U8 SK_FAR *)(A1))[0] == ((SK_U8 SK_FAR *)(A2))[0]))
#else /* SK_ADDR_DWORD_COMPARE */
#define SK_ADDR_EQUAL(A1,A2) ( \
(*(SK_U16 SK_FAR *)&(((SK_U8 SK_FAR *)(A1))[4]) == \
*(SK_U16 SK_FAR *)&(((SK_U8 SK_FAR *)(A2))[4])) && \
(*(SK_U32 SK_FAR *)&(((SK_U8 SK_FAR *)(A1))[0]) == \
*(SK_U32 SK_FAR *)&(((SK_U8 SK_FAR *)(A2))[0])))
#endif /* SK_ADDR_DWORD_COMPARE */
#endif /* SK_ADDR_EQUAL */
/* typedefs *******************************************************************/
......@@ -239,13 +277,13 @@ typedef struct s_AddrPort {
/* ----- Public part (read-only) ----- */
SK_MAC_ADDR CurrentMacAddress; /* Current physical MAC Address. */
SK_MAC_ADDR CurrentMacAddress; /* Current physical MAC Address. */
SK_MAC_ADDR PermanentMacAddress; /* Permanent physical MAC Address. */
int PromMode; /* Promiscuous Mode. */
int PromMode; /* Promiscuous Mode. */
/* ----- Private part ----- */
SK_MAC_ADDR PreviousMacAddress; /* Prev. phys. MAC Address. */
SK_MAC_ADDR PreviousMacAddress; /* Prev. phys. MAC Address. */
SK_BOOL CurrentMacAddressSet; /* CurrentMacAddress is set. */
SK_U8 Align01;
......@@ -255,18 +293,20 @@ typedef struct s_AddrPort {
SK_U32 NextExactMatchDrv;
SK_MAC_ADDR Exact[SK_ADDR_EXACT_MATCHES];
SK_FILTER64 InexactFilter; /* For 64-bit hash register. */
SK_FILTER64 InexactRlmtFilter; /* For 64-bit hash register. */
SK_FILTER64 InexactDrvFilter; /* For 64-bit hash register. */
} SK_ADDR_PORT;
struct s_AddrNet {
/* ----- Public part (read-only) ----- */
SK_MAC_ADDR CurrentMacAddress; /* Logical MAC Address. */
SK_MAC_ADDR CurrentMacAddress; /* Logical MAC Address. */
SK_MAC_ADDR PermanentMacAddress; /* Logical MAC Address. */
/* ----- Private part ----- */
SK_U32 ActivePort; /* View of module ADDR. */
SK_U32 ActivePort; /* View of module ADDR. */
SK_BOOL CurrentMacAddressSet; /* CurrentMacAddress is set. */
SK_U8 Align01;
SK_U16 Align02;
......@@ -294,44 +334,94 @@ typedef struct s_Addr {
extern int SkAddrInit(
SK_AC *pAC,
SK_IOC IoC,
int Level);
int Level);
extern int SkAddrMcClear(
SK_AC *pAC,
SK_IOC IoC,
SK_U32 PortNumber,
int Flags);
int Flags);
extern int SkAddrXmacMcClear(
SK_AC *pAC,
SK_IOC IoC,
SK_U32 PortNumber,
int Flags);
extern int SkAddrGmacMcClear(
SK_AC *pAC,
SK_IOC IoC,
SK_U32 PortNumber,
int Flags);
extern int SkAddrMcAdd(
SK_AC *pAC,
SK_IOC IoC,
SK_U32 PortNumber,
SK_MAC_ADDR *pMc,
int Flags);
int Flags);
extern int SkAddrXmacMcAdd(
SK_AC *pAC,
SK_IOC IoC,
SK_U32 PortNumber,
SK_MAC_ADDR *pMc,
int Flags);
extern int SkAddrGmacMcAdd(
SK_AC *pAC,
SK_IOC IoC,
SK_U32 PortNumber,
SK_MAC_ADDR *pMc,
int Flags);
extern int SkAddrMcUpdate(
SK_AC *pAC,
SK_IOC IoC,
SK_U32 PortNumber);
extern int SkAddrXmacMcUpdate(
SK_AC *pAC,
SK_IOC IoC,
SK_U32 PortNumber);
extern int SkAddrGmacMcUpdate(
SK_AC *pAC,
SK_IOC IoC,
SK_U32 PortNumber);
extern int SkAddrOverride(
SK_AC *pAC,
SK_IOC IoC,
SK_U32 PortNumber,
SK_MAC_ADDR *pNewAddr,
int Flags);
SK_MAC_ADDR SK_FAR *pNewAddr,
int Flags);
extern int SkAddrPromiscuousChange(
SK_AC *pAC,
SK_IOC IoC,
SK_U32 PortNumber,
int NewPromMode);
int NewPromMode);
extern int SkAddrXmacPromiscuousChange(
SK_AC *pAC,
SK_IOC IoC,
SK_U32 PortNumber,
int NewPromMode);
extern int SkAddrGmacPromiscuousChange(
SK_AC *pAC,
SK_IOC IoC,
SK_U32 PortNumber,
int NewPromMode);
#ifndef SK_SLIM
extern int SkAddrSwap(
SK_AC *pAC,
SK_IOC IoC,
SK_U32 FromPortNumber,
SK_U32 ToPortNumber);
#endif
#else /* defined(SK_KR_PROTO)) */
......
drivers/net/sk98lin/h/skdebug.h
View file @ 8866d756
/******************************************************************************
*
* Name: skdebug.h
* Project: GEnesis, PCI Gigabit Ethernet Adapter
* Version: $Revision: 1.10 $
* Date: $Date: 1999/11/22 13:47:40 $
* Project: Gigabit Ethernet Adapters, Common Modules
* Version: $Revision: 1.14 $
* Date: $Date: 2003/05/13 17:26:00 $
* Purpose: SK specific DEBUG support
*
******************************************************************************/
/******************************************************************************
*
* (C)Copyright 1998,1999 SysKonnect,
* a business unit of Schneider & Koch & Co. Datensysteme GmbH.
* (C)Copyright 1998-2002 SysKonnect.
* (C)Copyright 2002-2003 Marvell.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -26,6 +26,19 @@
*
* History:
* $Log: skdebug.h,v $
* Revision 1.14 2003/05/13 17:26:00 mkarl
* Editorial changes.
*
* Revision 1.13 2003/03/31 07:16:39 mkarl
* Corrected Copyright.
*
* Revision 1.12 2002/07/15 15:37:13 rschmidt
* Power Management support
* Editorial changes
*
* Revision 1.11 2002/04/25 11:04:39 rschmidt
* Editorial changes
*
* Revision 1.10 1999/11/22 13:47:40 cgoos
* Changed license header to GPL.
*
......@@ -89,26 +102,25 @@
#define SK_DBGMOD_MERR 0x00000001L /* general module error indication */
#define SK_DBGMOD_HWM 0x00000002L /* Hardware init module */
#define SK_DBGMOD_RLMT 0x00000004L /* RLMT module */
#define SK_DBGMOD_VPD 0x00000008L /* VPD module */
#define SK_DBGMOD_I2C 0x00000010L /* I2C module */
#define SK_DBGMOD_PNMI 0x00000020L /* PNMI module */
#define SK_DBGMOD_CSUM 0x00000040L /* CSUM module */
#define SK_DBGMOD_ADDR 0x00000080L /* ADDR module */
#define SK_DBGMOD_RLMT 0x00000004L /* RLMT module */
#define SK_DBGMOD_VPD 0x00000008L /* VPD module */
#define SK_DBGMOD_I2C 0x00000010L /* I2C module */
#define SK_DBGMOD_PNMI 0x00000020L /* PNMI module */
#define SK_DBGMOD_CSUM 0x00000040L /* CSUM module */
#define SK_DBGMOD_ADDR 0x00000080L /* ADDR module */
#define SK_DBGMOD_PECP 0x00000100L /* PECP module */
#define SK_DBGMOD_POWM 0x00000200L /* Power Management module */
/* Debug events */
#define SK_DBGCAT_INIT 0x00000001L /* module/driver initialization */
#define SK_DBGCAT_CTRL 0x00000002L /* controlling: add/rmv MCA/MAC
* and other controls (IOCTL)
*/
#define SK_DBGCAT_ERR 0x00000004L /* error handling paths */
#define SK_DBGCAT_TX 0x00000008L /* transmit path */
#define SK_DBGCAT_RX 0x00000010L /* receive path */
#define SK_DBGCAT_IRQ 0x00000020L /* general IRQ handling */
#define SK_DBGCAT_QUEUE 0x00000040L /* any queue management */
#define SK_DBGCAT_DUMP 0x00000080L /* large data output e.g. hex dump */
#define SK_DBGCAT_FATAL 0x00000100L /* large data output e.g. hex dump */
#define SK_DBGCAT_INIT 0x00000001L /* module/driver initialization */
#define SK_DBGCAT_CTRL 0x00000002L /* controlling devices */
#define SK_DBGCAT_ERR 0x00000004L /* error handling paths */
#define SK_DBGCAT_TX 0x00000008L /* transmit path */
#define SK_DBGCAT_RX 0x00000010L /* receive path */
#define SK_DBGCAT_IRQ 0x00000020L /* general IRQ handling */
#define SK_DBGCAT_QUEUE 0x00000040L /* any queue management */
#define SK_DBGCAT_DUMP 0x00000080L /* large data output e.g. hex dump */
#define SK_DBGCAT_FATAL 0x00000100L /* fatal error */
#endif /* __INC_SKDEBUG_H */
drivers/net/sk98lin/h/skdrv1st.h
View file @ 8866d756
......@@ -2,16 +2,15 @@
*
* Name: skdrv1st.h
* Project: GEnesis, PCI Gigabit Ethernet Adapter
* Version: $Revision: 1.9.2.1 $
* Date: $Date: 2001/03/12 16:50:59 $
* Version: $Revision: 1.15 $
* Date: $Date: 2003/07/17 14:54:09 $
* Purpose: First header file for driver and all other modules
*
******************************************************************************/
/******************************************************************************
*
* (C)Copyright 1998-2001 SysKonnect,
* a business unit of Schneider & Koch & Co. Datensysteme GmbH.
* (C)Copyright 1998-2003 SysKonnect GmbH.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -27,6 +26,30 @@
* History:
*
* $Log: skdrv1st.h,v $
* Revision 1.15 2003/07/17 14:54:09 rroesler
* Fix: Corrected SK_PNMI_READ macros to copy right amount of bytes
*
* Revision 1.14 2003/06/03 14:36:32 mlindner
* Add: Additions for SK_SLIM
*
* Revision 1.13 2003/05/26 14:03:06 mlindner
* Add: Support for SLIM skaddr
*
* Revision 1.12 2003/05/26 12:56:39 mlindner
* Add: Support for Kernel 2.5/2.6
* Add: New SkOsGetTimeCurrent function
* Add: SK_PNMI_HUNDREDS_SEC definition
* Fix: SK_TICKS_PER_SEC on Intel Itanium2
*
* Revision 1.11 2003/02/25 14:16:40 mlindner
* Fix: Copyright statement
*
* Revision 1.10 2002/10/02 12:46:02 mlindner
* Add: Support for Yukon
*
* Revision 1.9.2.2 2001/12/07 12:06:42 mlindner
* Fix: malloc -> slab changes
*
* Revision 1.9.2.1 2001/03/12 16:50:59 mlindner
* chg: kernel 2.4 adaption
*
......@@ -72,7 +95,7 @@
* Description:
*
* This is the first include file of the driver, which includes all
* necessary system header files and some of the GEnesis header files.
* neccessary system header files and some of the GEnesis header files.
* It also defines some basic items.
*
* Include File Hierarchy:
......@@ -84,17 +107,22 @@
#ifndef __INC_SKDRV1ST_H
#define __INC_SKDRV1ST_H
/* Check kernel version */
#include <linux/version.h>
typedef struct s_AC SK_AC;
/* Set card versions */
#define SK_FAR
/* override some default functions with optimized linux functions */
#define SK_PNMI_STORE_U16(p,v) memcpy((char*)(p),(char*)&(v),2)
#define SK_PNMI_STORE_U32(p,v) memcpy((char*)(p),(char*)&(v),4)
#define SK_PNMI_STORE_U64(p,v) memcpy((char*)(p),(char*)&(v),8)
#define SK_PNMI_READ_U16(p,v) memcpy((char*)&(v),(char*)(p),2)
#define SK_PNMI_READ_U32(p,v) memcpy((char*)&(v),(char*)(p),2)
#define SK_PNMI_READ_U64(p,v) memcpy((char*)&(v),(char*)(p),2)
#define SK_PNMI_READ_U32(p,v) memcpy((char*)&(v),(char*)(p),4)
#define SK_PNMI_READ_U64(p,v) memcpy((char*)&(v),(char*)(p),8)
#define SkCsCalculateChecksum(p,l) ((~ip_compute_csum(p, l)) & 0xffff)
......@@ -116,7 +144,6 @@ typedef struct s_AC SK_AC;
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/crc32.h>
#include <asm/byteorder.h>
#include <asm/bitops.h>
#include <asm/io.h>
......@@ -140,9 +167,11 @@ typedef struct s_AC SK_AC;
#define SK_BIG_ENDIAN
#endif
#define SK_NET_DEVICE net_device
/* we use gethrtime(), return unit: nanoseconds */
#define SK_TICKS_PER_SEC HZ
#define SK_TICKS_PER_SEC 100
#define SK_MEM_MAPPED_IO
......@@ -161,17 +190,17 @@ typedef struct s_DrvRlmtMbuf SK_MBUF;
#define SK_MEMCPY(dest,src,size) memcpy(dest,src,size)
#define SK_MEMCMP(s1,s2,size) memcmp(s1,s2,size)
#define SK_MEMSET(dest,val,size) memset(dest,val,size)
#define SK_STRLEN(pStr) strlen((char*)pStr)
#define SK_STRNCPY(pDest,pSrc,size) strncpy((char*)pDest,(char*)pSrc,size)
#define SK_STRCMP(pStr1,pStr2) strcmp((char*)pStr1,(char*)pStr2)
#define SK_STRLEN(pStr) strlen((char*)(pStr))
#define SK_STRNCPY(pDest,pSrc,size) strncpy((char*)(pDest),(char*)(pSrc),size)
#define SK_STRCMP(pStr1,pStr2) strcmp((char*)(pStr1),(char*)(pStr2))
/* macros to access the adapter */
#define SK_OUT8(b,a,v) writeb(v, (b+a))
#define SK_OUT16(b,a,v) writew(v, (b+a))
#define SK_OUT32(b,a,v) writel(v, (b+a))
#define SK_IN8(b,a,pv) (*(pv) = readb(b+a))
#define SK_IN16(b,a,pv) (*(pv) = readw(b+a))
#define SK_IN32(b,a,pv) (*(pv) = readl(b+a))
#define SK_OUT8(b,a,v) writeb((v), ((b)+(a)))
#define SK_OUT16(b,a,v) writew((v), ((b)+(a)))
#define SK_OUT32(b,a,v) writel((v), ((b)+(a)))
#define SK_IN8(b,a,pv) (*(pv) = readb((b)+(a)))
#define SK_IN16(b,a,pv) (*(pv) = readw((b)+(a)))
#define SK_IN32(b,a,pv) (*(pv) = readl((b)+(a)))
#define int8_t char
#define int16_t short
......@@ -222,11 +251,11 @@ extern void SkDbgPrintf(const char *format,...);
#define SK_DBGCAT_DRV_INT_SRC 0x04000000
#define SK_DBGCAT_DRV_EVENT 0x08000000
#endif /* DEBUG */
#endif
#define SK_ERR_LOG SkErrorLog
extern void SkErrorLog(SK_AC*, int, int, char*);
#endif /* __INC_SKDRV1ST_H */
#endif
drivers/net/sk98lin/h/skdrv2nd.h
View file @ 8866d756
This diff is collapsed.
drivers/net/sk98lin/h/skerror.h
View file @ 8866d756
/******************************************************************************
*
* Name: skerror.h
* Project: GEnesis, PCI Gigabit Ethernet Adapter
* Version: $Revision: 1.4 $
* Date: $Date: 1999/11/22 13:51:59 $
* Project: Gigabit Ethernet Adapters, Common Modules
* Version: $Revision: 1.7 $
* Date: $Date: 2003/05/13 17:25:13 $
* Purpose: SK specific Error log support
*
******************************************************************************/
/******************************************************************************
*
* (C)Copyright 1998,1999 SysKonnect,
* a business unit of Schneider & Koch & Co. Datensysteme GmbH.
* (C)Copyright 1998-2002 SysKonnect.
* (C)Copyright 2002-2003 Marvell.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -26,6 +26,15 @@
*
* History:
* $Log: skerror.h,v $
* Revision 1.7 2003/05/13 17:25:13 mkarl
* Editorial changes.
*
* Revision 1.6 2003/03/31 07:17:48 mkarl
* Corrected Copyright.
*
* Revision 1.5 2002/04/25 11:05:10 rschmidt
* Editorial changes
*
* Revision 1.4 1999/11/22 13:51:59 cgoos
* Changed license header to GPL.
*
......@@ -49,29 +58,29 @@
#define _INC_SKERROR_H_
/*
* Define the Error Classes
* Define Error Classes
*/
#define SK_ERRCL_OTHER (0) /* Other error */
#define SK_ERRCL_OTHER (0) /* Other error */
#define SK_ERRCL_CONFIG (1L<<0) /* Configuration error */
#define SK_ERRCL_INIT (1L<<1) /* Initialization error */
#define SK_ERRCL_NORES (1L<<2) /* Out of resources error */
#define SK_ERRCL_SW (1L<<3) /* internal Software error */
#define SK_ERRCL_HW (1L<<4) /* Hardware failure */
#define SK_ERRCL_NORES (1L<<2) /* Out of Resources error */
#define SK_ERRCL_SW (1L<<3) /* Internal Software error */
#define SK_ERRCL_HW (1L<<4) /* Hardware Failure */
#define SK_ERRCL_COMM (1L<<5) /* Communication error */
/*
* Define Error code bases
* Define Error Code Bases
*/
#define SK_ERRBASE_RLMT 100 /* Base Error number for RLMT */
#define SK_ERRBASE_HWINIT 200 /* Base Error number for HWInit */
#define SK_ERRBASE_VPD 300 /* Base Error number for VPD */
#define SK_ERRBASE_PNMI 400 /* Base Error number for PNMI */
#define SK_ERRBASE_CSUM 500 /* Base Error number for Checksum */
#define SK_ERRBASE_SIRQ 600 /* Base Error number for Special IRQ */
#define SK_ERRBASE_I2C 700 /* Base Error number for i2C module */
#define SK_ERRBASE_QUEUE 800 /* Base Error number for Scheduler */
#define SK_ERRBASE_ADDR 900 /* Base Error number for Address mod. */
#define SK_ERRBASE_RLMT 100 /* Base Error number for RLMT */
#define SK_ERRBASE_HWINIT 200 /* Base Error number for HWInit */
#define SK_ERRBASE_VPD 300 /* Base Error number for VPD */
#define SK_ERRBASE_PNMI 400 /* Base Error number for PNMI */
#define SK_ERRBASE_CSUM 500 /* Base Error number for Checksum */
#define SK_ERRBASE_SIRQ 600 /* Base Error number for Special IRQ */
#define SK_ERRBASE_I2C 700 /* Base Error number for I2C module */
#define SK_ERRBASE_QUEUE 800 /* Base Error number for Scheduler */
#define SK_ERRBASE_ADDR 900 /* Base Error number for Address module */
#define SK_ERRBASE_PECP 1000 /* Base Error number for PECP */
#define SK_ERRBASE_DRV 1100 /* Base Error number for Driver */
......
drivers/net/sk98lin/h/skgedrv.h
View file @ 8866d756
/******************************************************************************
*
* Name: skgedrv.h
* Project: GEnesis, PCI Gigabit Ethernet Adapter
* Version: $Revision: 1.4 $
* Date: $Date: 1999/11/22 13:52:46 $
* Project: Gigabit Ethernet Adapters, Common Modules
* Version: $Revision: 1.10 $
* Date: $Date: 2003/07/04 12:25:01 $
* Purpose: Interface with the driver
*
******************************************************************************/
/******************************************************************************
*
* (C)Copyright 1998,1999 SysKonnect,
* a business unit of Schneider & Koch & Co. Datensysteme GmbH.
* (C)Copyright 1998-2002 SysKonnect.
* (C)Copyright 2002-2003 Marvell.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -27,6 +27,27 @@
* History:
*
* $Log: skgedrv.h,v $
* Revision 1.10 2003/07/04 12:25:01 rschmidt
* Added event SK_DRV_DOWNSHIFT_DET for Downshift 4-Pair / 2-Pair
*
* Revision 1.9 2003/05/13 17:24:21 mkarl
* Added events SK_DRV_LINK_UP and SK_DRV_LINK_DOWN for drivers not using
* RLMT (SK_NO_RLMT).
* Editorial changes.
*
* Revision 1.8 2003/03/31 07:18:54 mkarl
* Corrected Copyright.
*
* Revision 1.7 2003/03/18 09:43:47 rroesler
* Added new event for timer
*
* Revision 1.6 2002/07/15 15:38:01 rschmidt
* Power Management support
* Editorial changes
*
* Revision 1.5 2002/04/25 11:05:47 rschmidt
* Editorial changes
*
* Revision 1.4 1999/11/22 13:52:46 cgoos
* Changed license header to GPL.
*
......@@ -49,17 +70,23 @@
/*
* Define the driver events.
* Usually the events are defined by the destination module. In case of the
* driver we put the definition of the events here.
* Usually the events are defined by the destination module.
* In case of the driver we put the definition of the events here.
*/
#define SK_DRV_PORT_RESET 1 /* The port needs to be reset */
#define SK_DRV_NET_UP 2 /* The net is now operational */
#define SK_DRV_NET_DOWN 3 /* The net is now down */
#define SK_DRV_SWITCH_SOFT 4 /* Ports switch with both links conn */
#define SK_DRV_SWITCH_HARD 5 /* Port switch due to link failure */
#define SK_DRV_RLMT_SEND 6 /* Send a RLMT packet */
#define SK_DRV_ADAP_FAIL 7 /* The whole adapter fails */
#define SK_DRV_PORT_FAIL 8 /* One port fails */
#define SK_DRV_SWITCH_INTERN 9 /* Port switch from driver to itself */
#endif /* __INC_SKGEDRV_H_ */
#define SK_DRV_PORT_RESET 1 /* The port needs to be reset */
#define SK_DRV_NET_UP 2 /* The net is operational */
#define SK_DRV_NET_DOWN 3 /* The net is down */
#define SK_DRV_SWITCH_SOFT 4 /* Ports switch with both links connected */
#define SK_DRV_SWITCH_HARD 5 /* Port switch due to link failure */
#define SK_DRV_RLMT_SEND 6 /* Send a RLMT packet */
#define SK_DRV_ADAP_FAIL 7 /* The whole adapter fails */
#define SK_DRV_PORT_FAIL 8 /* One port fails */
#define SK_DRV_SWITCH_INTERN 9 /* Port switch by the driver itself */
#define SK_DRV_POWER_DOWN 10 /* Power down mode */
#define SK_DRV_TIMER 11 /* Timer for free use */
#ifdef SK_NO_RLMT
#define SK_DRV_LINK_UP 12 /* Link Up event for driver */
#define SK_DRV_LINK_DOWN 13 /* Link Down event for driver */
#endif
#define SK_DRV_DOWNSHIFT_DET 14 /* Downshift 4-Pair / 2-Pair (YUKON only) */
#endif /* __INC_SKGEDRV_H_ */
drivers/net/sk98lin/h/skgehw.h
View file @ 8866d756
This source diff could not be displayed because it is too large. You can view the blob instead.
drivers/net/sk98lin/h/skgehwt.h
View file @ 8866d756
/******************************************************************************
*
* Name: skhwt.h
* Project: Genesis, PCI Gigabit Ethernet Adapter
* Version: $Revision: 1.4 $
* Date: $Date: 1998/08/19 09:50:58 $
* Project: Gigabit Ethernet Adapters, Schedule-Modul
* Version: $Revision: 1.6 $
* Date: $Date: 2003/05/13 17:57:48 $
* Purpose: Defines for the hardware timer functions
*
******************************************************************************/
/******************************************************************************
*
* (C)Copyright 1989-1998 SysKonnect,
* a business unit of Schneider & Koch & Co. Datensysteme GmbH.
* All Rights Reserved
* (C)Copyright 1998-2002 SysKonnect GmbH.
* (C)Copyright 2002-2003 Marvell.
*
* THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF SYSKONNECT
* The copyright notice above does not evidence any
* actual or intended publication of such source code.
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This Module contains Proprietary Information of SysKonnect
* and should be treated as Confidential.
*
* The information in this file is provided for the exclusive use of
* the licensees of SysKonnect.
* Such users have the right to use, modify, and incorporate this code
* into products for purposes authorized by the license agreement
* provided they include this notice and the associated copyright notice
* with any such product.
* The information in this file is provided "AS IS" without warranty.
*
******************************************************************************/
......@@ -36,6 +27,12 @@
* History:
*
* $Log: skgehwt.h,v $
* Revision 1.6 2003/05/13 17:57:48 mkarl
* Editorial changes.
*
* Revision 1.5 1999/11/22 13:54:24 cgoos
* Changed license header to GPL.
*
* Revision 1.4 1998/08/19 09:50:58 gklug
* fix: remove struct keyword from c-code (see CCC) add typedefs
*
......
drivers/net/sk98lin/h/skgei2c.h
View file @ 8866d756
This diff is collapsed.
drivers/net/sk98lin/h/skgeinit.h
View file @ 8866d756
This diff is collapsed.
drivers/net/sk98lin/h/skgepnm2.h
View file @ 8866d756
......@@ -2,15 +2,16 @@
*
* Name: skgepnm2.h
* Project: GEnesis, PCI Gigabit Ethernet Adapter
* Version: $Revision: 1.30 $
* Date: $Date: 2001/02/06 10:03:41 $
* Version: $Revision: 1.36 $
* Date: $Date: 2003/05/23 12:45:13 $
* Purpose: Defines for Private Network Management Interface
*
****************************************************************************/
/******************************************************************************
*
* (C)Copyright 1998-2001 SysKonnect GmbH.
* (C)Copyright 1998-2002 SysKonnect GmbH.
* (C)Copyright 2002-2003 Marvell.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -26,6 +27,28 @@
* History:
*
* $Log: skgepnm2.h,v $
* Revision 1.36 2003/05/23 12:45:13 tschilli
* #ifndef SK_PNMI_HUNDREDS_SEC added to SK_PNMI_HUNDREDS_SEC definition
* to allow own time macro defines.
*
* Revision 1.35 2003/03/27 11:27:48 tschilli
* Copyright messages changed.
*
* Revision 1.34 2002/12/16 09:05:18 tschilli
* Code for VCT handling added.
*
* Revision 1.33 2002/09/10 09:00:03 rwahl
* Adapted boolean definitions according sktypes.
*
* Revision 1.32 2002/08/09 09:47:01 rwahl
* Added write-only flag to oid access defines.
* Editorial changes.
*
* Revision 1.31 2002/07/17 19:23:18 rwahl
* - Replaced MAC counter definitions by enumeration.
* - Added definition SK_PNMI_MAC_TYPES.
* - Added chipset defnition for Yukon.
*
* Revision 1.30 2001/02/06 10:03:41 mkunz
* - Pnmi V4 dual net support added. Interface functions and macros extended
* - Vpd bug fixed
......@@ -140,26 +163,19 @@
#ifndef _SKGEPNM2_H_
#define _SKGEPNM2_H_
#ifndef FALSE
#define FALSE 0
#endif
#ifndef TRUE
#define TRUE !(FALSE)
#endif
/*
* General definitions
*/
#define SK_PNMI_CHIPSET 1 /* XMAC11800FP */
#define SK_PNMI_CHIPSET_XMAC 1 /* XMAC11800FP */
#define SK_PNMI_CHIPSET_YUKON 2 /* YUKON */
#define SK_PNMI_BUS_PCI 1 /* PCI bus*/
/*
* Actions
*/
#define SK_PNMI_ACT_IDLE 1
#define SK_PNMI_ACT_RESET 2
#define SK_PNMI_ACT_IDLE 1
#define SK_PNMI_ACT_RESET 2
#define SK_PNMI_ACT_SELFTEST 3
#define SK_PNMI_ACT_RESETCNT 4
......@@ -170,13 +186,13 @@
#define SK_PNMI_VPD_RW 1
#define SK_PNMI_VPD_RO 2
#define SK_PNMI_VPD_OK 0
#define SK_PNMI_VPD_OK 0
#define SK_PNMI_VPD_NOTFOUND 1
#define SK_PNMI_VPD_CUT 2
#define SK_PNMI_VPD_TIMEOUT 3
#define SK_PNMI_VPD_FULL 4
#define SK_PNMI_VPD_NOWRITE 5
#define SK_PNMI_VPD_FATAL 6
#define SK_PNMI_VPD_CUT 2
#define SK_PNMI_VPD_TIMEOUT 3
#define SK_PNMI_VPD_FULL 4
#define SK_PNMI_VPD_NOWRITE 5
#define SK_PNMI_VPD_FATAL 6
#define SK_PNMI_VPD_IGNORE 0
#define SK_PNMI_VPD_CREATE 1
......@@ -188,124 +204,137 @@
*/
#define SK_PNMI_DEF_RLMT_CHG_THRES 240 /* 4 changes per minute */
/*
* VCT internal status values
*/
#define SK_PNMI_VCT_PENDING 32
#define SK_PNMI_VCT_TEST_DONE 64
#define SK_PNMI_VCT_LINK 128
/*
* Internal table definitions
*/
#define SK_PNMI_GET 0
#define SK_PNMI_PRESET 1
#define SK_PNMI_PRESET 1
#define SK_PNMI_SET 2
#define SK_PNMI_RO 0
#define SK_PNMI_RW 1
#define SK_PNMI_WO 2
typedef struct s_OidTabEntry {
SK_U32 Id;
SK_U32 InstanceNo;
SK_U32 Id;
SK_U32 InstanceNo;
unsigned int StructSize;
unsigned int Offset;
int Access;
int (* Func)(SK_AC *pAc, SK_IOC pIo, int action,
SK_U32 Id, char* pBuf, unsigned int* pLen,
SK_U32 Instance, unsigned int TableIndex,
SK_U32 NetNumber);
SK_U16 Param;
int Access;
int (* Func)(SK_AC *pAc, SK_IOC pIo, int action,
SK_U32 Id, char* pBuf, unsigned int* pLen,
SK_U32 Instance, unsigned int TableIndex,
SK_U32 NetNumber);
SK_U16 Param;
} SK_PNMI_TAB_ENTRY;
/*
* Trap lengths
*/
#define SK_PNMI_TRAP_SIMPLE_LEN 17
#define SK_PNMI_TRAP_SIMPLE_LEN 17
#define SK_PNMI_TRAP_SENSOR_LEN_BASE 46
#define SK_PNMI_TRAP_RLMT_CHANGE_LEN 23
#define SK_PNMI_TRAP_RLMT_PORT_LEN 23
#define SK_PNMI_TRAP_RLMT_PORT_LEN 23
/*
* Number of MAC types supported
*/
#define SK_PNMI_MAC_TYPES (SK_MAC_GMAC + 1)
/*
* MAC statistic data structures
* Only for the first 64 counters: the number relates to the bit in the
* XMAC overflow status register
* MAC statistic data list (overall set for MAC types used)
*/
#define SK_PNMI_HTX 0
#define SK_PNMI_HTX_OCTET 1
#define SK_PNMI_HTX_OCTETHIGH 1
#define SK_PNMI_HTX_OCTETLOW 2
#define SK_PNMI_HTX_BROADCAST 3
#define SK_PNMI_HTX_MULTICAST 4
#define SK_PNMI_HTX_UNICAST 5
#define SK_PNMI_HTX_LONGFRAMES 6
#define SK_PNMI_HTX_BURST 7
#define SK_PNMI_HTX_PMACC 8
#define SK_PNMI_HTX_MACC 9
#define SK_PNMI_HTX_SINGLE_COL 10
#define SK_PNMI_HTX_MULTI_COL 11
#define SK_PNMI_HTX_EXCESS_COL 12
#define SK_PNMI_HTX_LATE_COL 13
#define SK_PNMI_HTX_DEFFERAL 14
#define SK_PNMI_HTX_EXCESS_DEF 15
#define SK_PNMI_HTX_UNDERRUN 16
#define SK_PNMI_HTX_CARRIER 17
#define SK_PNMI_HTX_UTILUNDER 18
#define SK_PNMI_HTX_UTILOVER 19
#define SK_PNMI_HTX_64 20
#define SK_PNMI_HTX_127 21
#define SK_PNMI_HTX_255 22
#define SK_PNMI_HTX_511 23
#define SK_PNMI_HTX_1023 24
#define SK_PNMI_HTX_MAX 25
#define SK_PNMI_HTX_RESERVED26 26
#define SK_PNMI_HTX_RESERVED27 27
#define SK_PNMI_HTX_RESERVED28 28
#define SK_PNMI_HTX_RESERVED29 29
#define SK_PNMI_HTX_RESERVED30 30
#define SK_PNMI_HTX_RESERVED31 31
#define SK_PNMI_HRX (32 + 0)
#define SK_PNMI_HRX_OCTET (32 + 1)
#define SK_PNMI_HRX_OCTETHIGH (32 + 1)
#define SK_PNMI_HRX_OCTETLOW (32 + 2)
#define SK_PNMI_HRX_BROADCAST (32 + 3)
#define SK_PNMI_HRX_MULTICAST (32 + 4)
#define SK_PNMI_HRX_UNICAST (32 + 5)
#define SK_PNMI_HRX_PMACC (32 + 6)
#define SK_PNMI_HRX_MACC (32 + 7)
#define SK_PNMI_HRX_PMACC_ERR (32 + 8)
#define SK_PNMI_HRX_MACC_UNKWN (32 + 9)
#define SK_PNMI_HRX_BURST (32 + 10)
#define SK_PNMI_HRX_MISSED (32 + 11)
#define SK_PNMI_HRX_FRAMING (32 + 12)
#define SK_PNMI_HRX_OVERFLOW (32 + 13)
#define SK_PNMI_HRX_JABBER (32 + 14)
#define SK_PNMI_HRX_CARRIER (32 + 15)
#define SK_PNMI_HRX_IRLENGTH (32 + 16)
#define SK_PNMI_HRX_SYMBOL (32 + 17)
#define SK_PNMI_HRX_SHORTS (32 + 18)
#define SK_PNMI_HRX_RUNT (32 + 19)
#define SK_PNMI_HRX_TOO_LONG (32 + 20)
#define SK_PNMI_HRX_FCS (32 + 21)
#define SK_PNMI_HRX_RESERVED22 (32 + 22)
#define SK_PNMI_HRX_CEXT (32 + 23)
#define SK_PNMI_HRX_UTILUNDER (32 + 24)
#define SK_PNMI_HRX_UTILOVER (32 + 25)
#define SK_PNMI_HRX_64 (32 + 26)
#define SK_PNMI_HRX_127 (32 + 27)
#define SK_PNMI_HRX_255 (32 + 28)
#define SK_PNMI_HRX_511 (32 + 29)
#define SK_PNMI_HRX_1023 (32 + 30)
#define SK_PNMI_HRX_MAX (32 + 31)
#define SK_PNMI_HTX_SYNC 64
#define SK_PNMI_HTX_SYNC_OCTET 65
#define SK_PNMI_HRX_LONGFRAMES 66
#define SK_PNMI_MAX_IDX (SK_PNMI_CNT_NO)
enum SK_MACSTATS {
SK_PNMI_HTX = 0,
SK_PNMI_HTX_OCTET,
SK_PNMI_HTX_OCTETHIGH = SK_PNMI_HTX_OCTET,
SK_PNMI_HTX_OCTETLOW,
SK_PNMI_HTX_BROADCAST,
SK_PNMI_HTX_MULTICAST,
SK_PNMI_HTX_UNICAST,
SK_PNMI_HTX_BURST,
SK_PNMI_HTX_PMACC,
SK_PNMI_HTX_MACC,
SK_PNMI_HTX_COL,
SK_PNMI_HTX_SINGLE_COL,
SK_PNMI_HTX_MULTI_COL,
SK_PNMI_HTX_EXCESS_COL,
SK_PNMI_HTX_LATE_COL,
SK_PNMI_HTX_DEFFERAL,
SK_PNMI_HTX_EXCESS_DEF,
SK_PNMI_HTX_UNDERRUN,
SK_PNMI_HTX_CARRIER,
SK_PNMI_HTX_UTILUNDER,
SK_PNMI_HTX_UTILOVER,
SK_PNMI_HTX_64,
SK_PNMI_HTX_127,
SK_PNMI_HTX_255,
SK_PNMI_HTX_511,
SK_PNMI_HTX_1023,
SK_PNMI_HTX_MAX,
SK_PNMI_HTX_LONGFRAMES,
SK_PNMI_HTX_SYNC,
SK_PNMI_HTX_SYNC_OCTET,
SK_PNMI_HTX_RESERVED,
SK_PNMI_HRX,
SK_PNMI_HRX_OCTET,
SK_PNMI_HRX_OCTETHIGH = SK_PNMI_HRX_OCTET,
SK_PNMI_HRX_OCTETLOW,
SK_PNMI_HRX_BADOCTET,
SK_PNMI_HRX_BADOCTETHIGH = SK_PNMI_HRX_BADOCTET,
SK_PNMI_HRX_BADOCTETLOW,
SK_PNMI_HRX_BROADCAST,
SK_PNMI_HRX_MULTICAST,
SK_PNMI_HRX_UNICAST,
SK_PNMI_HRX_PMACC,
SK_PNMI_HRX_MACC,
SK_PNMI_HRX_PMACC_ERR,
SK_PNMI_HRX_MACC_UNKWN,
SK_PNMI_HRX_BURST,
SK_PNMI_HRX_MISSED,
SK_PNMI_HRX_FRAMING,
SK_PNMI_HRX_UNDERSIZE,
SK_PNMI_HRX_OVERFLOW,
SK_PNMI_HRX_JABBER,
SK_PNMI_HRX_CARRIER,
SK_PNMI_HRX_IRLENGTH,
SK_PNMI_HRX_SYMBOL,
SK_PNMI_HRX_SHORTS,
SK_PNMI_HRX_RUNT,
SK_PNMI_HRX_TOO_LONG,
SK_PNMI_HRX_FCS,
SK_PNMI_HRX_CEXT,
SK_PNMI_HRX_UTILUNDER,
SK_PNMI_HRX_UTILOVER,
SK_PNMI_HRX_64,
SK_PNMI_HRX_127,
SK_PNMI_HRX_255,
SK_PNMI_HRX_511,
SK_PNMI_HRX_1023,
SK_PNMI_HRX_MAX,
SK_PNMI_HRX_LONGFRAMES,
SK_PNMI_HRX_RESERVED,
SK_PNMI_MAX_IDX /* NOTE: Ensure SK_PNMI_CNT_NO is set to this value */
};
/*
* MAC specific data
*/
typedef struct s_PnmiStatAddr {
SK_BOOL GetOffset; /* TRUE: Call GetStatVal function */
SK_U16 Param; /* XMAC register containing value */
SK_U16 Reg; /* MAC register containing the value */
SK_BOOL GetOffset; /* TRUE: Offset managed by PNMI (call GetStatVal())*/
} SK_PNMI_STATADDR;
......@@ -338,11 +367,13 @@ typedef struct s_PnmiStatAddr {
/*
* Time macros
*/
#ifndef SK_PNMI_HUNDREDS_SEC
#if SK_TICKS_PER_SEC == 100
#define SK_PNMI_HUNDREDS_SEC(t) (t)
#else
#define SK_PNMI_HUNDREDS_SEC(t) ((((long)t) * 100) / (SK_TICKS_PER_SEC))
#endif
#define SK_PNMI_HUNDREDS_SEC(t) (((t) * 100) / (SK_TICKS_PER_SEC))
#endif /* !SK_TICKS_PER_SEC */
#endif /* !SK_PNMI_HUNDREDS_SEC */
/*
* Macros to work around alignment problems
......
drivers/net/sk98lin/h/skgepnmi.h
View file @ 8866d756
This diff is collapsed.
drivers/net/sk98lin/h/skgesirq.h
View file @ 8866d756
/******************************************************************************
*
* Name: skgesirq.h
* Project: GEnesis, PCI Gigabit Ethernet Adapter
* Version: $Revision: 1.22 $
* Date: $Date: 2000/11/09 11:30:10 $
* Project: Gigabit Ethernet Adapters, Common Modules
* Version: $Revision: 1.30 $
* Date: $Date: 2003/07/04 12:34:13 $
* Purpose: SK specific Gigabit Ethernet special IRQ functions
*
******************************************************************************/
/******************************************************************************
*
* (C)Copyright 1998-2000 SysKonnect GmbH.
* (C)Copyright 1998-2002 SysKonnect.
* (C)Copyright 2002-2003 Marvell.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -25,6 +26,35 @@
*
* History:
* $Log: skgesirq.h,v $
* Revision 1.30 2003/07/04 12:34:13 rschmidt
* Added SKERR_SIRQ_E025 for Downshift detected (Yukon-Copper)
*
* Revision 1.29 2003/05/28 15:14:49 rschmidt
* Moved defines for return codes of SkGePortCheckUp() to header file.
* Minor changes to avoid LINT warnings.
*
* Revision 1.28 2003/05/13 17:22:43 mkarl
* Editorial changes.
*
* Revision 1.27 2003/03/31 07:32:34 mkarl
* Corrected Copyright.
* Editorial changes.
*
* Revision 1.26 2002/10/14 09:52:36 rschmidt
* Added SKERR_SIRQ_E023 and SKERR_SIRQ_E024 for GPHY (Yukon)
* Editorial changes
*
* Revision 1.25 2002/07/15 18:15:52 rwahl
* Editorial changes.
*
* Revision 1.24 2002/07/15 15:39:21 rschmidt
* Corrected define for SKERR_SIRQ_E022
* Editorial changes
*
* Revision 1.23 2002/04/25 11:09:45 rschmidt
* Removed declarations for SkXmInitPhy(), SkXmRxTxEnable()
* Editorial changes
*
* Revision 1.22 2000/11/09 11:30:10 rassmann
* WA: Waiting after releasing reset until BCom chip is accessible.
*
......@@ -66,7 +96,7 @@
* defined in skgeinit.h now.
*
* Revision 1.9 1998/10/14 14:00:39 gklug
* add: eroor logs for init phys
* add: error logs for init phys
*
* Revision 1.8 1998/10/14 05:44:05 gklug
* add: E020
......@@ -100,76 +130,86 @@
#ifndef _INC_SKGESIRQ_H_
#define _INC_SKGESIRQ_H_
/* Define return codes of SkGePortCheckUp and CheckShort */
#define SK_HW_PS_NONE 0 /* No action needed */
#define SK_HW_PS_RESTART 1 /* Restart needed */
#define SK_HW_PS_LINK 2 /* Link Up actions needed */
/*
* Define the Event the special IRQ/INI module can handle
*/
#define SK_HWEV_WATIM 1 /* Timeout for WA errata #2 XMAC */
#define SK_HWEV_PORT_START 2 /* Port Start Event by RLMT */
#define SK_HWEV_PORT_STOP 3 /* Port Stop Event by RLMT */
#define SK_HWEV_CLEAR_STAT 4 /* Clear Statistics by PNMI */
#define SK_HWEV_UPDATE_STAT 5 /* Update Statistics by PNMI */
#define SK_HWEV_SET_LMODE 6 /* Set Link Mode by PNMI */
#define SK_HWEV_WATIM 1 /* Timeout for WA Errata #2 XMAC */
#define SK_HWEV_PORT_START 2 /* Port Start Event by RLMT */
#define SK_HWEV_PORT_STOP 3 /* Port Stop Event by RLMT */
#define SK_HWEV_CLEAR_STAT 4 /* Clear Statistics by PNMI */
#define SK_HWEV_UPDATE_STAT 5 /* Update Statistics by PNMI */
#define SK_HWEV_SET_LMODE 6 /* Set Link Mode by PNMI */
#define SK_HWEV_SET_FLOWMODE 7 /* Set Flow Control Mode by PNMI */
#define SK_HWEV_SET_ROLE 8 /* Set Master/Slave (Role) by PNMI */
#define SK_HWEV_HALFDUP_CHK 9 /* Set Master/Slave (Role) by PNMI */
#define SK_HWEV_SET_ROLE 8 /* Set Master/Slave (Role) by PNMI */
#define SK_HWEV_SET_SPEED 9 /* Set Link Speed by PNMI */
#define SK_HWEV_HALFDUP_CHK 10 /* Half Duplex Hangup Workaround */
#define SK_WA_ACT_TIME (5000000L) /* 5 sec */
#define SK_WA_INA_TIME (100000L) /* 100 msec */
#define SK_WA_ACT_TIME (5000000UL) /* 5 sec */
#define SK_WA_INA_TIME (100000UL) /* 100 msec */
#define SK_HALFDUP_CHK_TIME (10000L) /* 10 msec */
#define SK_HALFDUP_CHK_TIME (10000UL) /* 10 msec */
/*
* Define the error numbers and messages
*/
#define SKERR_SIRQ_E001 (SK_ERRBASE_SIRQ+0)
#define SKERR_SIRQ_E001MSG "Unknown event"
#define SKERR_SIRQ_E002 (SKERR_SIRQ_E001+1)
#define SKERR_SIRQ_E002MSG "Packet timeout RX1"
#define SKERR_SIRQ_E003 (SKERR_SIRQ_E002+1)
#define SKERR_SIRQ_E003MSG "Packet timeout RX2"
#define SKERR_SIRQ_E004 (SKERR_SIRQ_E003+1)
#define SKERR_SIRQ_E004MSG "XMAC 1 not correctly initialized"
#define SKERR_SIRQ_E005 (SKERR_SIRQ_E004+1)
#define SKERR_SIRQ_E005MSG "XMAC 2 not correctly initialized"
#define SKERR_SIRQ_E006 (SKERR_SIRQ_E005+1)
#define SKERR_SIRQ_E006MSG "CHECK failure R1"
#define SKERR_SIRQ_E007 (SKERR_SIRQ_E006+1)
#define SKERR_SIRQ_E007MSG "CHECK failure R2"
#define SKERR_SIRQ_E008 (SKERR_SIRQ_E007+1)
#define SKERR_SIRQ_E008MSG "CHECK failure XS1"
#define SKERR_SIRQ_E009 (SKERR_SIRQ_E008+1)
#define SKERR_SIRQ_E009MSG "CHECK failure XA1"
#define SKERR_SIRQ_E010 (SKERR_SIRQ_E009+1)
#define SKERR_SIRQ_E010MSG "CHECK failure XS2"
#define SKERR_SIRQ_E011 (SKERR_SIRQ_E010+1)
#define SKERR_SIRQ_E011MSG "CHECK failure XA2"
#define SKERR_SIRQ_E012 (SKERR_SIRQ_E011+1)
#define SKERR_SIRQ_E012MSG "unexpected IRQ Master error"
#define SKERR_SIRQ_E013 (SKERR_SIRQ_E012+1)
#define SKERR_SIRQ_E013MSG "unexpected IRQ Status error"
#define SKERR_SIRQ_E014 (SKERR_SIRQ_E013+1)
#define SKERR_SIRQ_E014MSG "Parity error on RAM (read)"
#define SKERR_SIRQ_E015 (SKERR_SIRQ_E014+1)
#define SKERR_SIRQ_E015MSG "Parity error on RAM (write)"
#define SKERR_SIRQ_E016 (SKERR_SIRQ_E015+1)
#define SKERR_SIRQ_E016MSG "Parity error MAC 1"
#define SKERR_SIRQ_E017 (SKERR_SIRQ_E016+1)
#define SKERR_SIRQ_E017MSG "Parity error MAC 2"
#define SKERR_SIRQ_E018 (SKERR_SIRQ_E017+1)
#define SKERR_SIRQ_E018MSG "Parity error RX 1"
#define SKERR_SIRQ_E019 (SKERR_SIRQ_E018+1)
#define SKERR_SIRQ_E019MSG "Parity error RX 2"
#define SKERR_SIRQ_E020 (SKERR_SIRQ_E019+1)
#define SKERR_SIRQ_E020MSG "XMAC transmit FIFO underrun"
#define SKERR_SIRQ_E021 (SKERR_SIRQ_E020+1)
#define SKERR_SIRQ_E021MSG "Spurious I2C interrupt"
#define SKERR_SIRQ_E022 (SKERR_SIRQ_E020+1)
#define SKERR_SIRQ_E022MSG "Cable pair swap error"
#define SKERR_SIRQ_E001 (SK_ERRBASE_SIRQ+0)
#define SKERR_SIRQ_E001MSG "Unknown event"
#define SKERR_SIRQ_E002 (SKERR_SIRQ_E001+1)
#define SKERR_SIRQ_E002MSG "Packet timeout RX1"
#define SKERR_SIRQ_E003 (SKERR_SIRQ_E002+1)
#define SKERR_SIRQ_E003MSG "Packet timeout RX2"
#define SKERR_SIRQ_E004 (SKERR_SIRQ_E003+1)
#define SKERR_SIRQ_E004MSG "MAC 1 not correctly initialized"
#define SKERR_SIRQ_E005 (SKERR_SIRQ_E004+1)
#define SKERR_SIRQ_E005MSG "MAC 2 not correctly initialized"
#define SKERR_SIRQ_E006 (SKERR_SIRQ_E005+1)
#define SKERR_SIRQ_E006MSG "CHECK failure R1"
#define SKERR_SIRQ_E007 (SKERR_SIRQ_E006+1)
#define SKERR_SIRQ_E007MSG "CHECK failure R2"
#define SKERR_SIRQ_E008 (SKERR_SIRQ_E007+1)
#define SKERR_SIRQ_E008MSG "CHECK failure XS1"
#define SKERR_SIRQ_E009 (SKERR_SIRQ_E008+1)
#define SKERR_SIRQ_E009MSG "CHECK failure XA1"
#define SKERR_SIRQ_E010 (SKERR_SIRQ_E009+1)
#define SKERR_SIRQ_E010MSG "CHECK failure XS2"
#define SKERR_SIRQ_E011 (SKERR_SIRQ_E010+1)
#define SKERR_SIRQ_E011MSG "CHECK failure XA2"
#define SKERR_SIRQ_E012 (SKERR_SIRQ_E011+1)
#define SKERR_SIRQ_E012MSG "unexpected IRQ Master error"
#define SKERR_SIRQ_E013 (SKERR_SIRQ_E012+1)
#define SKERR_SIRQ_E013MSG "unexpected IRQ Status error"
#define SKERR_SIRQ_E014 (SKERR_SIRQ_E013+1)
#define SKERR_SIRQ_E014MSG "Parity error on RAM (read)"
#define SKERR_SIRQ_E015 (SKERR_SIRQ_E014+1)
#define SKERR_SIRQ_E015MSG "Parity error on RAM (write)"
#define SKERR_SIRQ_E016 (SKERR_SIRQ_E015+1)
#define SKERR_SIRQ_E016MSG "Parity error MAC 1"
#define SKERR_SIRQ_E017 (SKERR_SIRQ_E016+1)
#define SKERR_SIRQ_E017MSG "Parity error MAC 2"
#define SKERR_SIRQ_E018 (SKERR_SIRQ_E017+1)
#define SKERR_SIRQ_E018MSG "Parity error RX 1"
#define SKERR_SIRQ_E019 (SKERR_SIRQ_E018+1)
#define SKERR_SIRQ_E019MSG "Parity error RX 2"
#define SKERR_SIRQ_E020 (SKERR_SIRQ_E019+1)
#define SKERR_SIRQ_E020MSG "MAC transmit FIFO underrun"
#define SKERR_SIRQ_E021 (SKERR_SIRQ_E020+1)
#define SKERR_SIRQ_E021MSG "Spurious TWSI interrupt"
#define SKERR_SIRQ_E022 (SKERR_SIRQ_E021+1)
#define SKERR_SIRQ_E022MSG "Cable pair swap error"
#define SKERR_SIRQ_E023 (SKERR_SIRQ_E022+1)
#define SKERR_SIRQ_E023MSG "Auto-negotiation error"
#define SKERR_SIRQ_E024 (SKERR_SIRQ_E023+1)
#define SKERR_SIRQ_E024MSG "FIFO overflow error"
#define SKERR_SIRQ_E025 (SKERR_SIRQ_E024+1)
#define SKERR_SIRQ_E025MSG "2 Pair Downshift detected"
extern void SkGeSirqIsr(SK_AC *pAC, SK_IOC IoC, SK_U32 Istatus);
extern int SkGeSirqEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Para);
extern void SkXmInitPhy( SK_AC *pAC, SK_IOC IoC, int Port, SK_BOOL DoLoop);
extern int SkXmRxTxEnable(SK_AC *pAC, SK_IOC IoC, int Port);
extern void SkHWLinkUp(SK_AC *pAC, SK_IOC IoC, int Port);
extern void SkHWLinkDown(SK_AC *pAC, SK_IOC IoC, int Port);
......
drivers/net/sk98lin/h/ski2c.h
View file @ 8866d756
......@@ -2,17 +2,15 @@
*
* Name: ski2c.h
* Project: GEnesis, PCI Gigabit Ethernet Adapter
* Version: $Revision: 1.30 $
* Date: $Date: 2001/04/05 11:38:09 $
* Version: $Revision: 1.34 $
* Date: $Date: 2003/01/28 09:11:21 $
* Purpose: Defines to access Voltage and Temperature Sensor
* (taken from Monalisa (taken from Concentrator))
*
******************************************************************************/
/******************************************************************************
*
* (C)Copyright 1998,1999 SysKonnect,
* a business unit of Schneider & Koch & Co. Datensysteme GmbH.
* (C)Copyright 1998-2003 SysKonnect GmbH.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -28,6 +26,18 @@
* History:
*
* $Log: ski2c.h,v $
* Revision 1.34 2003/01/28 09:11:21 rschmidt
* Editorial changes
*
* Revision 1.33 2002/10/14 16:40:50 rschmidt
* Editorial changes (TWSI)
*
* Revision 1.32 2002/08/13 08:55:07 rschmidt
* Editorial changes
*
* Revision 1.31 2002/08/06 09:44:22 jschmalz
* Extensions and changes for Yukon
*
* Revision 1.30 2001/04/05 11:38:09 rassmann
* Set SenState to idle in SkI2cWaitIrq().
* Changed error message in SkI2cWaitIrq().
......@@ -142,127 +152,131 @@ typedef struct s_Sensor SK_SENSOR;
#include "h/skgei2c.h"
/*
* Define the I2c events.
* Define the I2C events.
*/
#define SK_I2CEV_IRQ 1 /* IRQ happened Event */
#define SK_I2CEV_TIM 2 /* Timeout event */
#define SK_I2CEV_CLEAR 3 /* Clear Mib Values */
#define SK_I2CEV_CLEAR 3 /* Clear MIB Values */
/*
* Define READ and WRITE Constants.
*/
#define I2C_READ 0
#define I2C_WRITE 1
#define I2C_READ 0
#define I2C_WRITE 1
#define I2C_BURST 1
#define I2C_SIGLE 0
#define I2C_SINGLE 0
#define SKERR_I2C_E001 (SK_ERRBASE_I2C+0)
#define SKERR_I2C_E001MSG "Sensor index unknown"
#define SKERR_I2C_E002 (SKERR_I2C_E001+1)
#define SKERR_I2C_E002MSG "I2C: transfer does not complete.\n"
#define SKERR_I2C_E003 (SKERR_I2C_E002+1)
#define SKERR_I2C_E003MSG "lm80: NAK on device send.\n"
#define SKERR_I2C_E004 (SKERR_I2C_E003+1)
#define SKERR_I2C_E004MSG "lm80: NAK on register send.\n"
#define SKERR_I2C_E005 (SKERR_I2C_E004+1)
#define SKERR_I2C_E005MSG "lm80: NAK on device (2) send.\n"
#define SKERR_I2C_E006 (SKERR_I2C_E005+1)
#define SKERR_I2C_E006MSG "Unknown event"
#define SKERR_I2C_E007 (SKERR_I2C_E006+1)
#define SKERR_I2C_E007MSG "LM80 read out of state"
#define SKERR_I2C_E008 (SKERR_I2C_E007+1)
#define SKERR_I2C_E008MSG "unexpected sensor read completed"
#define SKERR_I2C_E009 (SKERR_I2C_E008+1)
#define SKERR_I2C_E009MSG "WARNING: temperature sensor out of range"
#define SKERR_I2C_E010 (SKERR_I2C_E009+1)
#define SKERR_I2C_E010MSG "WARNING: voltage sensor out of range"
#define SKERR_I2C_E011 (SKERR_I2C_E010+1)
#define SKERR_I2C_E011MSG "ERROR: temperature sensor out of range"
#define SKERR_I2C_E012 (SKERR_I2C_E011+1)
#define SKERR_I2C_E012MSG "ERROR: voltage sensor out of range"
#define SKERR_I2C_E013 (SKERR_I2C_E012+1)
#define SKERR_I2C_E013MSG "ERROR: couldn't init sensor"
#define SKERR_I2C_E014 (SKERR_I2C_E013+1)
#define SKERR_I2C_E014MSG "WARNING: fan sensor out of range"
#define SKERR_I2C_E015 (SKERR_I2C_E014+1)
#define SKERR_I2C_E015MSG "ERROR: fan sensor out of range"
#define SKERR_I2C_E016 (SKERR_I2C_E015+1)
#define SKERR_I2C_E016MSG "I2C: active transfer does not complete.\n"
#define SKERR_I2C_E001 (SK_ERRBASE_I2C+0)
#define SKERR_I2C_E001MSG "Sensor index unknown"
#define SKERR_I2C_E002 (SKERR_I2C_E001+1)
#define SKERR_I2C_E002MSG "TWSI: transfer does not complete"
#define SKERR_I2C_E003 (SKERR_I2C_E002+1)
#define SKERR_I2C_E003MSG "LM80: NAK on device send"
#define SKERR_I2C_E004 (SKERR_I2C_E003+1)
#define SKERR_I2C_E004MSG "LM80: NAK on register send"
#define SKERR_I2C_E005 (SKERR_I2C_E004+1)
#define SKERR_I2C_E005MSG "LM80: NAK on device (2) send"
#define SKERR_I2C_E006 (SKERR_I2C_E005+1)
#define SKERR_I2C_E006MSG "Unknown event"
#define SKERR_I2C_E007 (SKERR_I2C_E006+1)
#define SKERR_I2C_E007MSG "LM80 read out of state"
#define SKERR_I2C_E008 (SKERR_I2C_E007+1)
#define SKERR_I2C_E008MSG "Unexpected sensor read completed"
#define SKERR_I2C_E009 (SKERR_I2C_E008+1)
#define SKERR_I2C_E009MSG "WARNING: temperature sensor out of range"
#define SKERR_I2C_E010 (SKERR_I2C_E009+1)
#define SKERR_I2C_E010MSG "WARNING: voltage sensor out of range"
#define SKERR_I2C_E011 (SKERR_I2C_E010+1)
#define SKERR_I2C_E011MSG "ERROR: temperature sensor out of range"
#define SKERR_I2C_E012 (SKERR_I2C_E011+1)
#define SKERR_I2C_E012MSG "ERROR: voltage sensor out of range"
#define SKERR_I2C_E013 (SKERR_I2C_E012+1)
#define SKERR_I2C_E013MSG "ERROR: couldn't init sensor"
#define SKERR_I2C_E014 (SKERR_I2C_E013+1)
#define SKERR_I2C_E014MSG "WARNING: fan sensor out of range"
#define SKERR_I2C_E015 (SKERR_I2C_E014+1)
#define SKERR_I2C_E015MSG "ERROR: fan sensor out of range"
#define SKERR_I2C_E016 (SKERR_I2C_E015+1)
#define SKERR_I2C_E016MSG "TWSI: active transfer does not complete"
/*
* Define Timeout values
*/
#define SK_I2C_TIM_LONG 2000000L /* 2 seconds */
#define SK_I2C_TIM_SHORT 100000L /* 100 milliseconds */
#define SK_I2C_TIM_LONG 2000000L /* 2 seconds */
#define SK_I2C_TIM_SHORT 100000L /* 100 milliseconds */
#define SK_I2C_TIM_WATCH 1000000L /* 1 second */
/*
* Define trap and error log hold times
*/
#ifndef SK_SEN_ERR_TR_HOLD
#define SK_SEN_ERR_TR_HOLD (4*SK_TICKS_PER_SEC)
#define SK_SEN_ERR_TR_HOLD (4*SK_TICKS_PER_SEC)
#endif
#ifndef SK_SEN_ERR_LOG_HOLD
#define SK_SEN_ERR_LOG_HOLD (60*SK_TICKS_PER_SEC)
#define SK_SEN_ERR_LOG_HOLD (60*SK_TICKS_PER_SEC)
#endif
#ifndef SK_SEN_WARN_TR_HOLD
#define SK_SEN_WARN_TR_HOLD (15*SK_TICKS_PER_SEC)
#define SK_SEN_WARN_TR_HOLD (15*SK_TICKS_PER_SEC)
#endif
#ifndef SK_SEN_WARN_LOG_HOLD
#define SK_SEN_WARN_LOG_HOLD (15*60*SK_TICKS_PER_SEC)
#define SK_SEN_WARN_LOG_HOLD (15*60*SK_TICKS_PER_SEC)
#endif
/*
* Defines for SenType
*/
#define SK_SEN_TEMP 1
#define SK_SEN_VOLT 2
#define SK_SEN_FAN 3
#define SK_SEN_UNKNOWN 0
#define SK_SEN_TEMP 1
#define SK_SEN_VOLT 2
#define SK_SEN_FAN 3
/*
* Define for the ErrorFlag
* Define for the SenErrorFlag
*/
#define SK_SEN_ERR_OK 1 /* Error Flag: O.K. */
#define SK_SEN_ERR_WARN 2 /* Error Flag: Warning */
#define SK_SEN_ERR_ERR 3 /* Error Flag: Error */
#define SK_SEN_ERR_NOT_PRESENT 0 /* Error Flag: Sensor not present */
#define SK_SEN_ERR_OK 1 /* Error Flag: O.K. */
#define SK_SEN_ERR_WARN 2 /* Error Flag: Warning */
#define SK_SEN_ERR_ERR 3 /* Error Flag: Error */
#define SK_SEN_ERR_FAULTY 4 /* Error Flag: Faulty */
/*
* Define the Sensor struct
*/
struct s_Sensor {
char *SenDesc; /* Description */
int SenType; /* Voltage or Temperature */
SK_I32 SenValue; /* Current value of the sensor */
SK_I32 SenThreErrHigh; /* High error Threshhold of this sensor */
SK_I32 SenThreWarnHigh;/* High warning Threshhold of this sensor */
SK_I32 SenThreErrLow; /* Lower error Threshold of the sensor */
SK_I32 SenThreWarnLow; /* Lower warning Threshold of the sensor */
int SenErrFlag; /* Sensor indicated an error */
SK_BOOL SenInit; /* Is sensor initialized? */
SK_U64 SenErrCts; /* Error trap counter */
SK_U64 SenWarnCts; /* Warning trap counter */
SK_U64 SenBegErrTS; /* Begin error timestamp */
SK_U64 SenBegWarnTS; /* Begin warning timestamp */
char *SenDesc; /* Description */
int SenType; /* Voltage or Temperature */
SK_I32 SenValue; /* Current value of the sensor */
SK_I32 SenThreErrHigh; /* High error Threshhold of this sensor */
SK_I32 SenThreWarnHigh; /* High warning Threshhold of this sensor */
SK_I32 SenThreErrLow; /* Lower error Threshold of the sensor */
SK_I32 SenThreWarnLow; /* Lower warning Threshold of the sensor */
int SenErrFlag; /* Sensor indicated an error */
SK_BOOL SenInit; /* Is sensor initialized ? */
SK_U64 SenErrCts; /* Error trap counter */
SK_U64 SenWarnCts; /* Warning trap counter */
SK_U64 SenBegErrTS; /* Begin error timestamp */
SK_U64 SenBegWarnTS; /* Begin warning timestamp */
SK_U64 SenLastErrTrapTS; /* Last error trap timestamp */
SK_U64 SenLastErrLogTS; /* Last error log timestamp */
SK_U64 SenLastWarnTrapTS; /* Last warning trap timestamp */
SK_U64 SenLastWarnLogTS; /* Last warning log timestamp */
int SenState; /* Sensor State (see HW specific include) */
int (*SenRead)(SK_AC *pAC, SK_IOC IoC,struct s_Sensor *pSen) ;
/* Sensors read function */
SK_U16 SenReg; /* Register Address for this sensor */
SK_U8 SenDev; /* DeviceSelection for this sensor */
} ;
int SenState; /* Sensor State (see HW specific include) */
int (*SenRead)(SK_AC *pAC, SK_IOC IoC, struct s_Sensor *pSen);
/* Sensors read function */
SK_U16 SenReg; /* Register Address for this sensor */
SK_U8 SenDev; /* Device Selection for this sensor */
};
typedef struct s_I2c {
SK_SENSOR SenTable[SK_MAX_SENSORS]; /* Sensor Table */
int CurrSens; /* Which sensor is currently queried */
int MaxSens; /* Max. number of sensors */
int InitLevel; /* Initialized Level */
int CurrSens; /* Which sensor is currently queried */
int MaxSens; /* Max. number of sensors */
int TimerMode; /* Use the timer also to watch the state machine */
int InitLevel; /* Initialized Level */
#ifndef SK_DIAG
int DummyReads; /* Number of non-checked dummy reads */
int DummyReads; /* Number of non-checked dummy reads */
SK_TIMER SenTimer; /* Sensors timer */
#endif /* !SK_DIAG */
#endif /* !SK_DIAG */
} SK_I2C;
extern int SkI2cReadSensor(SK_AC *pAC, SK_IOC IoC, SK_SENSOR *pSen);
......@@ -273,5 +287,5 @@ extern void SkI2cWaitIrq(SK_AC *pAC, SK_IOC IoC);
extern void SkI2cIsr(SK_AC *pAC, SK_IOC IoC);
#endif
#endif /* n_SKI2C_H */
#endif /* n_SKI2C_H */
drivers/net/sk98lin/h/skqueue.h
View file @ 8866d756
This diff is collapsed.
drivers/net/sk98lin/h/skrlmt.h
View file @ 8866d756
This diff is collapsed.
drivers/net/sk98lin/h/sktimer.h
View file @ 8866d756
This diff is collapsed.
drivers/net/sk98lin/h/sktypes.h
View file @ 8866d756
......@@ -2,16 +2,15 @@
*
* Name: sktypes.h
* Project: GEnesis, PCI Gigabit Ethernet Adapter
* Version: $Revision: 1.2 $
* Date: $Date: 1999/11/22 14:01:58 $
* Version: $Revision: 1.3 $
* Date: $Date: 2003/02/25 14:16:40 $
* Purpose: Define data types for Linux
*
******************************************************************************/
/******************************************************************************
*
* (C)Copyright 1998,1999 SysKonnect,
* a business unit of Schneider & Koch & Co. Datensysteme GmbH.
* (C)Copyright 1998-2003 SysKonnect GmbH.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -27,6 +26,9 @@
* History:
*
* $Log: sktypes.h,v $
* Revision 1.3 2003/02/25 14:16:40 mlindner
* Fix: Copyright statement
*
* Revision 1.2 1999/11/22 14:01:58 cgoos
* Changed license header to GPL.
* Now using Linux' fixed size types instead of standard types.
......
drivers/net/sk98lin/h/skversion.h
View file @ 8866d756
This diff is collapsed.
drivers/net/sk98lin/h/skvpd.h
View file @ 8866d756
This diff is collapsed.
drivers/net/sk98lin/h/xmac_ii.h
View file @ 8866d756
This diff is collapsed.
drivers/net/sk98lin/skaddr.c
View file @ 8866d756
This diff is collapsed.
drivers/net/sk98lin/skcsum.c
View file @ 8866d756
This diff is collapsed.
drivers/net/sk98lin/skdim.c 0 → 100644
View file @ 8866d756
This diff is collapsed.
drivers/net/sk98lin/skge.c
View file @ 8866d756
This diff is collapsed.
drivers/net/sk98lin/skgehwt.c
View file @ 8866d756
This diff is collapsed.
drivers/net/sk98lin/skgeinit.c
View file @ 8866d756
This diff is collapsed.
drivers/net/sk98lin/skgemib.c 0 → 100644
View file @ 8866d756
This diff is collapsed.
drivers/net/sk98lin/skgepnmi.c
View file @ 8866d756
This diff is collapsed.
drivers/net/sk98lin/skgesirq.c
View file @ 8866d756
This diff is collapsed.
drivers/net/sk98lin/ski2c.c
View file @ 8866d756
This diff is collapsed.
drivers/net/sk98lin/sklm80.c
View file @ 8866d756
This diff is collapsed.
drivers/net/sk98lin/skproc.c
View file @ 8866d756
This diff is collapsed.
drivers/net/sk98lin/skqueue.c
View file @ 8866d756
This diff is collapsed.
drivers/net/sk98lin/skrlmt.c
View file @ 8866d756
This diff is collapsed.
drivers/net/sk98lin/sktimer.c
View file @ 8866d756
This diff is collapsed.
drivers/net/sk98lin/skvpd.c
View file @ 8866d756
This diff is collapsed.
drivers/net/sk98lin/skxmac2.c
View file @ 8866d756
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7