staging: comedi: addi_apci_3120: remove eeprom handling code

The boards supported by this driver do not have an eeprom. Remove
the unnecessary code to handle it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/addi_apci_3120.c

@@ -4,7 +4,6 @@
 
 #include "addi-data/addi_common.h"
 
-#include "addi-data/addi_eeprom.c"
 #include "addi-data/hwdrv_apci3120.c"
 
 #ifndef COMEDI_SUBD_TTLIO
@@ -19,7 +18,6 @@ static const struct addi_board apci3120_boardtypes[] = {
 		.i_IorangeBase0		= AMCC_OP_REG_SIZE,
 		.i_IorangeBase1		= APCI3120_ADDRESS_RANGE,
 		.i_IorangeBase2		= 8,
-		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
 		.i_NbrAiChannel		= 16,
 		.i_NbrAiChannelDiff	= 8,
 		.i_AiChannelList	= 16,
@@ -59,7 +57,6 @@ static const struct addi_board apci3120_boardtypes[] = {
 		.i_IorangeBase0		= AMCC_OP_REG_SIZE,
 		.i_IorangeBase1		= APCI3120_ADDRESS_RANGE,
 		.i_IorangeBase2		= 8,
-		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
 		.i_NbrAiChannel		= 16,
 		.i_NbrAiChannelDiff	= 8,
 		.i_AiChannelList	= 16,
@@ -91,23 +88,6 @@ static const struct addi_board apci3120_boardtypes[] = {
 	},
 };
 
-static int i_ADDIDATA_InsnReadEeprom(struct comedi_device *dev,
-				     struct comedi_subdevice *s,
-				     struct comedi_insn *insn,
-				     unsigned int *data)
-{
-	const struct addi_board *this_board = comedi_board(dev);
-	struct addi_private *devpriv = dev->private;
-	unsigned short w_Address = CR_CHAN(insn->chanspec);
-	unsigned short w_Data;
-
-	w_Data = addi_eeprom_readw(devpriv->i_IobaseAmcc,
-		this_board->pc_EepromChip, 2 * w_Address);
-	data[0] = w_Data;
-
-	return insn->n;
-}
-
 static irqreturn_t v_ADDI_Interrupt(int irq, void *d)
 {
 	struct comedi_device *dev = d;
@@ -149,7 +129,6 @@ static int apci3120_attach_pci(struct comedi_device *dev,
 	struct addi_private *devpriv;
 	struct comedi_subdevice *s;
 	int ret, pages, i, n_subdevices;
-	unsigned int dw_Dummy;
 
 	this_board = addi_find_boardinfo(dev, pcidev);
 	if (!this_board)
@@ -168,22 +147,14 @@ static int apci3120_attach_pci(struct comedi_device *dev,
 	if (this_board->i_Dma)
 		pci_set_master(pcidev);
 
-	if (!this_board->pc_EepromChip ||
-	    !strcmp(this_board->pc_EepromChip, ADDIDATA_9054)) {
-		if (this_board->i_IorangeBase1)
-			dev->iobase = pci_resource_start(pcidev, 1);
-		else
-			dev->iobase = pci_resource_start(pcidev, 0);
+	if (this_board->i_IorangeBase1)
+		dev->iobase = pci_resource_start(pcidev, 1);
+	else
+		dev->iobase = pci_resource_start(pcidev, 0);
 
-		devpriv->iobase = dev->iobase;
-		devpriv->i_IobaseAmcc = pci_resource_start(pcidev, 0);
-		devpriv->i_IobaseAddon = pci_resource_start(pcidev, 2);
-	} else {
-		dev->iobase = pci_resource_start(pcidev, 2);
-		devpriv->iobase = pci_resource_start(pcidev, 2);
-		devpriv->dw_AiBase = ioremap(pci_resource_start(pcidev, 3),
-					     this_board->i_IorangeBase3);
-	}
+	devpriv->iobase = dev->iobase;
+	devpriv->i_IobaseAmcc = pci_resource_start(pcidev, 0);
+	devpriv->i_IobaseAddon = pci_resource_start(pcidev, 2);
 	devpriv->i_IobaseReserved = pci_resource_start(pcidev, 3);
 
 	/* Initialize parameters that can be overridden in EEPROM */
@@ -210,23 +181,6 @@ static int apci3120_attach_pci(struct comedi_device *dev,
 			dev->irq = pcidev->irq;
 	}
 
-	/*  Read eepeom and fill addi_board Structure */
-
-	if (this_board->i_PCIEeprom) {
-		if (!(strcmp(this_board->pc_EepromChip, "S5920"))) {
-			/*  Set 3 wait stait */
-			if (!(strcmp(dev->board_name, "apci035"))) {
-				outl(0x80808082, devpriv->i_IobaseAmcc + 0x60);
-			} else {
-				outl(0x83838383, devpriv->i_IobaseAmcc + 0x60);
-			}
-			/*  Enable the interrupt for the controller */
-			dw_Dummy = inl(devpriv->i_IobaseAmcc + 0x38);
-			outl(dw_Dummy | 0x2000, devpriv->i_IobaseAmcc + 0x38);
-		}
-		addi_eeprom_read_info(dev, pci_resource_start(pcidev, 0));
-	}
-
 	devpriv->us_UseDma = ADDI_ENABLE;
 
 	if (devpriv->s_EeParameters.i_Dma) {
@@ -396,15 +350,7 @@ static int apci3120_attach_pci(struct comedi_device *dev,
 
 	/* EEPROM */
 	s = &dev->subdevices[6];
-	if (this_board->i_PCIEeprom) {
-		s->type = COMEDI_SUBD_MEMORY;
-		s->subdev_flags = SDF_READABLE | SDF_INTERNAL;
-		s->n_chan = 256;
-		s->maxdata = 0xffff;
-		s->insn_read = i_ADDIDATA_InsnReadEeprom;
-	} else {
-		s->type = COMEDI_SUBD_UNUSED;
-	}
+	s->type = COMEDI_SUBD_UNUSED;
 
 	i_ADDI_Reset(dev);
 	return 0;