Commit 88fa269b authored by Arnd Bergmann's avatar Arnd Bergmann

Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2xxx: PM: fix OMAP2xxx-specific UART idle bug in v3.3
  ARM: OMAP3: cm-t35: fix section mismatch warning
  ARM: OMAP2: Fix the OMAP2 only build break seen with 2011+ ARM tool-chains
  ARM: OMAP2+: board-generic: Add missing handle_irq callbacks
parents e9c6c5df 1e056ddd
......@@ -11,9 +11,9 @@ hwmod-common = omap_hwmod.o \
omap_hwmod_common_data.o
clock-common = clock.o clock_common_data.o \
clkt_dpll.o clkt_clksel.o
secure-common = omap-smc.o omap-secure.o
secure-common = omap-smc.o omap-secure.o
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
......
......@@ -437,7 +437,7 @@ static struct usbhs_omap_board_data usbhs_bdata __initdata = {
.reset_gpio_port[2] = -EINVAL
};
static void cm_t35_init_usbh(void)
static void __init cm_t35_init_usbh(void)
{
int err;
......
......@@ -17,6 +17,7 @@
#include <linux/i2c/twl.h>
#include <mach/hardware.h>
#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
#include <plat/board.h>
......@@ -102,6 +103,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.handle_irq = omap2_intc_handle_irq,
.init_machine = omap_generic_init,
.timer = &omap2_timer,
.dt_compat = omap242x_boards_compat,
......@@ -141,6 +143,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
.map_io = omap3_map_io,
.init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_init,
.timer = &omap3_timer,
.dt_compat = omap3_boards_compat,
......@@ -160,6 +163,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
.map_io = omap4_map_io,
.init_early = omap4430_init_early,
.init_irq = gic_init_irq,
.handle_irq = gic_handle_irq,
.init_machine = omap4_init,
.timer = &omap4_timer,
.dt_compat = omap4_boards_compat,
......
......@@ -82,13 +82,7 @@ static int omap2_fclks_active(void)
f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
/* Ignore UART clocks. These are handled by UART core (serial.c) */
f1 &= ~(OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_UART2_MASK);
f2 &= ~OMAP24XX_EN_UART3_MASK;
if (f1 | f2)
return 1;
return 0;
return (f1 | f2) ? 1 : 0;
}
static void omap2_enter_full_retention(void)
......
......@@ -3,7 +3,7 @@
#include <linux/types.h>
#ifdef CONFIG_ARCH_OMAP2PLUS
#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
extern int omap_secure_ram_reserve_memblock(void);
#else
static inline void omap_secure_ram_reserve_memblock(void)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment