Merge branch 'staging-linus' into staging-next

We need this for the pstore fixes that went into the staging-linus branch, so
that things apply properly for the pstore/android code merge.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/ABI/testing/sysfs-bus-iio

@@ -218,6 +218,7 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_scale
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_scale
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_scale
@@ -272,6 +273,7 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_accel_scale_available
 What:		/sys/.../iio:deviceX/in_voltageX_scale_available
 What:		/sys/.../iio:deviceX/in_voltage-voltage_scale_available
 What:		/sys/.../iio:deviceX/out_voltageX_scale_available
+What:		/sys/.../iio:deviceX/out_altvoltageX_scale_available
 What:		/sys/.../iio:deviceX/in_capacitance_scale_available
 KernelVersion:	2.635
 Contact:	linux-iio@vger.kernel.org
@@ -297,14 +299,19 @@ Description:
 		gives the 3dB frequency of the filter in Hz.
 
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_raw
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Raw (unscaled, no bias etc.) output voltage for
 		channel Y.  The number must always be specified and
 		unique if the output corresponds to a single channel.
+		While DAC like devices typically use out_voltage,
+		a continuous frequency generating device, such as
+		a DDS or PLL should use out_altvoltage.
 
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY&Z_raw
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -315,6 +322,8 @@ Description:
 
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown_mode
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown_mode
 KernelVersion:	2.6.38
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -331,6 +340,8 @@ Description:
 
 What:		/sys/.../iio:deviceX/out_votlageY_powerdown_mode_available
 What:		/sys/.../iio:deviceX/out_voltage_powerdown_mode_available
+What:		/sys/.../iio:deviceX/out_altvotlageY_powerdown_mode_available
+What:		/sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available
 KernelVersion:	2.6.38
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -339,6 +350,8 @@ Description:
 
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown
 KernelVersion:	2.6.38
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -348,6 +361,24 @@ Description:
 		operation. Y may be suppressed if all outputs are controlled
 		together.
 
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Output frequency for channel Y in Hz. The number must always be
+		specified and unique if the output corresponds to a single
+		channel.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Phase in radians of one frequency/clock output Y
+		(out_altvoltageY) relative to another frequency/clock output
+		(out_altvoltageZ) of the device X. The number must always be
+		specified and unique if the output corresponds to a single
+		channel.
+
 What:		/sys/bus/iio/devices/iio:deviceX/events
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org

drivers/iio/industrialio-core.c

@@ -724,7 +724,6 @@ static int iio_device_register_sysfs(struct iio_dev *indio_dev)
 	 * New channel registration method - relies on the fact a group does
 	 * not need to be initialized if it is name is NULL.
 	 */
-	INIT_LIST_HEAD(&indio_dev->channel_attr_list);
 	if (indio_dev->channels)
 		for (i = 0; i < indio_dev->num_channels; i++) {
 			ret = iio_device_add_channel_sysfs(indio_dev,
@@ -788,12 +787,16 @@ static void iio_device_unregister_sysfs(struct iio_dev *indio_dev)
 static void iio_dev_release(struct device *device)
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(device);
-	cdev_del(&indio_dev->chrdev);
+	if (indio_dev->chrdev.dev)
+		cdev_del(&indio_dev->chrdev);
 	if (indio_dev->modes & INDIO_BUFFER_TRIGGERED)
 		iio_device_unregister_trigger_consumer(indio_dev);
 	iio_device_unregister_eventset(indio_dev);
 	iio_device_unregister_sysfs(indio_dev);
 	iio_device_unregister_debugfs(indio_dev);
+
+	ida_simple_remove(&iio_ida, indio_dev->id);
+	kfree(indio_dev);
 }
 
 static struct device_type iio_dev_type = {
@@ -824,6 +827,7 @@ struct iio_dev *iio_device_alloc(int sizeof_priv)
 		dev_set_drvdata(&dev->dev, (void *)dev);
 		mutex_init(&dev->mlock);
 		mutex_init(&dev->info_exist_lock);
+		INIT_LIST_HEAD(&dev->channel_attr_list);
 
 		dev->id = ida_simple_get(&iio_ida, 0, 0, GFP_KERNEL);
 		if (dev->id < 0) {
@@ -841,10 +845,8 @@ EXPORT_SYMBOL(iio_device_alloc);
 
 void iio_device_free(struct iio_dev *dev)
 {
-	if (dev) {
-		ida_simple_remove(&iio_ida, dev->id);
-		kfree(dev);
-	}
+	if (dev)
+		put_device(&dev->dev);
 }
 EXPORT_SYMBOL(iio_device_free);
 
@@ -965,7 +967,7 @@ void iio_device_unregister(struct iio_dev *indio_dev)
 	mutex_lock(&indio_dev->info_exist_lock);
 	indio_dev->info = NULL;
 	mutex_unlock(&indio_dev->info_exist_lock);
-	device_unregister(&indio_dev->dev);
+	device_del(&indio_dev->dev);
 }
 EXPORT_SYMBOL(iio_device_unregister);
 subsys_initcall(iio_init);

drivers/staging/comedi/drivers.c

@@ -30,6 +30,7 @@
 #include <linux/pci.h>
 #include <linux/usb.h>
 #include <linux/errno.h>
+#include <linux/kconfig.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/fcntl.h>
@@ -1030,6 +1031,8 @@ void comedi_pci_driver_unregister(struct comedi_driver *comedi_driver,
 }
 EXPORT_SYMBOL_GPL(comedi_pci_driver_unregister);
 
+#if IS_ENABLED(CONFIG_USB)
+
 static int comedi_old_usb_auto_config(struct usb_interface *intf,
 				      struct comedi_driver *driver)
 {
@@ -1092,3 +1095,5 @@ void comedi_usb_driver_unregister(struct comedi_driver *comedi_driver,
 	comedi_driver_unregister(comedi_driver);
 }
 EXPORT_SYMBOL_GPL(comedi_usb_driver_unregister);
+
+#endif

drivers/staging/iio/Documentation/device.txt

@@ -29,8 +29,6 @@ Then fill in the following:
 	* info->driver_module:
 		Set to THIS_MODULE. Used to ensure correct ownership
 		of various resources allocate by the core.
-	* info->num_interrupt_lines:
-		Number of event triggering hardware lines the device has.
 	* info->event_attrs:
 		Attributes used to enable / disable hardware events.
 	* info->attrs:

drivers/staging/iio/adc/Kconfig

@@ -13,6 +13,7 @@ config AD7291
 config AD7298
 	tristate "Analog Devices AD7298 ADC driver"
 	depends on SPI
+	select IIO_KFIFO_BUF if IIO_BUFFER
 	help
 	  Say yes here to build support for Analog Devices AD7298
 	  8 Channel ADC with temperature sensor.

drivers/staging/iio/adc/ad7606_core.c

@@ -235,7 +235,8 @@ static const struct attribute_group ad7606_attribute_group_range = {
 		.indexed = 1,					\
 		.channel = num,					\
 		.address = num,					\
-		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,	\
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |	\
+				IIO_CHAN_INFO_SCALE_SHARED_BIT, \
 		.scan_index = num,				\
 		.scan_type = IIO_ST('s', 16, 16, 0),		\
 	}

drivers/staging/omapdrm/omap_fbdev.c

@@ -208,7 +208,8 @@ static int omap_fbdev_create(struct drm_fb_helper *helper,
 	 */
 	ret = omap_gem_get_paddr(fbdev->bo, &paddr, true);
 	if (ret) {
-		dev_err(dev->dev, "could not map (paddr)!\n");
+		dev_err(dev->dev,
+			"could not map (paddr)!  Skipping framebuffer alloc\n");
 		ret = -ENOMEM;
 		goto fail;
 	}
@@ -388,8 +389,11 @@ void omap_fbdev_free(struct drm_device *dev)
 
 	fbi = helper->fbdev;
 
-	unregister_framebuffer(fbi);
-	framebuffer_release(fbi);
+	/* only cleanup framebuffer if it is present */
+	if (fbi) {
+		unregister_framebuffer(fbi);
+		framebuffer_release(fbi);
+	}
 
 	drm_fb_helper_fini(helper);
 

fs/pstore/inode.c

@@ -258,7 +258,7 @@ int pstore_mkfile(enum pstore_type_id type, char *psname, u64 id,
 	return rc;
 }
 
-int pstore_fill_super(struct super_block *sb, void *data, int silent)
+static int pstore_fill_super(struct super_block *sb, void *data, int silent)
 {
 	struct inode *inode;
 

fs/pstore/ram.c

@@ -106,6 +106,8 @@ static ssize_t ramoops_pstore_read(u64 *id, enum pstore_type_id *type,
 	time->tv_sec = 0;
 	time->tv_nsec = 0;
 
+	/* Update old/shadowed buffer. */
+	persistent_ram_save_old(prz);
 	size = persistent_ram_old_size(prz);
 	*buf = kmalloc(size, GFP_KERNEL);
 	if (*buf == NULL)
@@ -184,6 +186,7 @@ static int ramoops_pstore_erase(enum pstore_type_id type, u64 id,
 		return -EINVAL;
 
 	persistent_ram_free_old(cxt->przs[id]);
+	persistent_ram_zap(cxt->przs[id]);
 
 	return 0;
 }

fs/pstore/ram_core.c

@@ -250,23 +250,24 @@ static void notrace persistent_ram_update(struct persistent_ram_zone *prz,
 	persistent_ram_update_ecc(prz, start, count);
 }
 
-static void __init
-persistent_ram_save_old(struct persistent_ram_zone *prz)
+void persistent_ram_save_old(struct persistent_ram_zone *prz)
 {
 	struct persistent_ram_buffer *buffer = prz->buffer;
 	size_t size = buffer_size(prz);
 	size_t start = buffer_start(prz);
-	char *dest;
 
-	persistent_ram_ecc_old(prz);
+	if (!size)
+		return;
 
-	dest = kmalloc(size, GFP_KERNEL);
-	if (dest == NULL) {
+	if (!prz->old_log) {
+		persistent_ram_ecc_old(prz);
+		prz->old_log = kmalloc(size, GFP_KERNEL);
+	}
+	if (!prz->old_log) {
 		pr_err("persistent_ram: failed to allocate buffer\n");
 		return;
 	}
 
-	prz->old_log = dest;
 	prz->old_log_size = size;
 	memcpy(prz->old_log, &buffer->data[start], size - start);
 	memcpy(prz->old_log + size - start, &buffer->data[0], start);
@@ -319,6 +320,13 @@ void persistent_ram_free_old(struct persistent_ram_zone *prz)
 	prz->old_log_size = 0;
 }
 
+void persistent_ram_zap(struct persistent_ram_zone *prz)
+{
+	atomic_set(&prz->buffer->start, 0);
+	atomic_set(&prz->buffer->size, 0);
+	persistent_ram_update_header_ecc(prz);
+}
+
 static void *persistent_ram_vmap(phys_addr_t start, size_t size)
 {
 	struct page **pages;
@@ -405,6 +413,7 @@ static int __init persistent_ram_post_init(struct persistent_ram_zone *prz, bool
 				" size %zu, start %zu\n",
 			       buffer_size(prz), buffer_start(prz));
 			persistent_ram_save_old(prz);
+			return 0;
 		}
 	} else {
 		pr_info("persistent_ram: no valid data in buffer"
@@ -412,8 +421,7 @@ static int __init persistent_ram_post_init(struct persistent_ram_zone *prz, bool
 	}
 
 	prz->buffer->sig = PERSISTENT_RAM_SIG;
-	atomic_set(&prz->buffer->start, 0);
-	atomic_set(&prz->buffer->size, 0);
+	persistent_ram_zap(prz);
 
 	return 0;
 }
@@ -448,7 +456,6 @@ struct persistent_ram_zone * __init persistent_ram_new(phys_addr_t start,
 		goto err;
 
 	persistent_ram_post_init(prz, ecc);
-	persistent_ram_update_header_ecc(prz);
 
 	return prz;
 err:

include/linux/pstore_ram.h

@@ -69,12 +69,14 @@ struct persistent_ram_zone * __init persistent_ram_new(phys_addr_t start,
 						       size_t size,
 						       bool ecc);
 void persistent_ram_free(struct persistent_ram_zone *prz);
+void persistent_ram_zap(struct persistent_ram_zone *prz);
 struct persistent_ram_zone *persistent_ram_init_ringbuffer(struct device *dev,
 		bool ecc);
 
 int persistent_ram_write(struct persistent_ram_zone *prz, const void *s,
 	unsigned int count);
 
+void persistent_ram_save_old(struct persistent_ram_zone *prz);
 size_t persistent_ram_old_size(struct persistent_ram_zone *prz);
 void *persistent_ram_old(struct persistent_ram_zone *prz);
 void persistent_ram_free_old(struct persistent_ram_zone *prz);