[PATCH] ov511 1.62 for 2.5.34

 Update the ov511 driver to version 1.62:
 o Update email address
 o Remove some dead code and fix some harmless typos
 o New device: Alpha Vision Tech. AlphaCam SE
 o Fix assignment of ov->proc_button->owner to not cause
   NULL pointer deref (credit: Oleg K.)
 o Support I2C read/write ioctl()s via V4L (credit: Oleg K.)
 o Add OV518-specific register dump code
 o New snapshot reset sequence; old one was causing
   erroneous I2C writes (credit: Oleg K.)
 o OV6630 needs different register 0x14 settings than OV6620
 o Don't print palette errors by default
 o Detect OV518 cameras that have packet numbering enabled
   by default and set ov->packet_numbering accordingly. This
   should fix the problems some users were having with babble
   (USB error -75) and cameras not working at all.

Documentation/usb/ov511.txt

@@ -105,15 +105,6 @@ MODULE PARAMETERS:
           4=most function calls and data parsing messages
           5=highly repetitive mesgs
 
-  NAME: fix_rgb_offset
-  TYPE: integer (Boolean)
-  DEFAULT: 0
-  DESC: Some people have reported that the blue component of the image is one
-        or so lines higher than the red component. This is only apparent in 
-        images with white objects on black backgrounds at 640x480. Setting this
-        to 1 will realign the color planes correctly. NOTE: You will likely
-        need a fast (500 MHz) CPU.
-
   NAME: snapshot
   TYPE: integer (Boolean)
   DEFAULT: 0
@@ -121,13 +112,6 @@ MODULE PARAMETERS:
 	the snapshot button is pressed. Note: enabling this mode disables
 	/proc/video/ov511/<minor#>/button
 
-  NAME: force_rgb	(Deprecated; may be removed in the future)
-  TYPE: integer (Boolean)
-  DEFAULT: 0
-  DESC: Force image to be read in RGB instead of BGR. This option allow
-        programs that expect RGB data (e.g. gqcam) to work with this driver. If
-        your colors look VERY wrong, you may want to change this.
-
   NAME: cams
   TYPE: integer (1-4 for OV511, 1-31 for OV511+)
   DEFAULT: 1
@@ -234,12 +218,7 @@ MODULE PARAMETERS:
 	greyscale mode with a color camera, for example. Supported modes are:
 		0                           (Allows all the following formats)
 		1   VIDEO_PALETTE_GREY      (Linear greyscale)
-		3   VIDEO_PALETTE_RGB565    (565 16 bit RGB)
-		4   VIDEO_PALETTE_RGB24     (24bit RGB)
-		7   VIDEO_PALETTE_YUV422    (YUV422 capture)
-		8   VIDEO_PALETTE_YUYV      (YUV422 capture; same as 7)
 		10  VIDEO_PALETTE_YUV420    (YUV 4:2:0 Planar)
-		13  VIDEO_PALETTE_YUV422P   (YUV 4:2:2 Planar)
 		15  VIDEO_PALETTE_YUV420P   (YUV 4:2:0 Planar, same as 10)
 
   NAME: backlight
@@ -278,29 +257,17 @@ MODULE PARAMETERS:
 
 WORKING FEATURES:
  o Color streaming/capture at most widths and heights that are multiples of 8.
- o RGB24, RGB565, YUV420/YUV420P, YUV422/YUYV, and YUV422P color
  o Monochrome (use force_palette=1 to enable)
  o Setting/getting of saturation, contrast, brightness, and hue (only some of
    them work the OV7620 and OV7620AE)
  o /proc status reporting
  o SAA7111A video capture support at 320x240 and 640x480
  o Compression support
-
-EXPERIMENTAL FEATURES:
- o OV518/OV518+ support
- o OV6630 sensor support
- o Banding filter
  o SMP compatibility
 
-TO-DO:
- o V4L2 support (This will be done after the next kernel patch release)
- o Setting of hue not working with OV7620
- o Setting of contrast and hue not working with OV7620AE
- o OV8600 sensor support (Not used in anything yet)
-
 HOW TO CONTACT ME:
 
-You can email me at mmcclell@bigfoot.com . Please prefix the subject line
+You can email me at mark@alpha.dyndns.org . Please prefix the subject line
 with "OV511: " so that I am certain to notice your message.
 
 CREDITS:

drivers/usb/media/ov511.h

@@ -286,21 +286,6 @@ enum {
 	SEN_SAA7111A,
 };
 
-// Not implemented yet
-#if 0
-/* Sensor classes */
-enum {
-	SCL_UNKNOWN,
-	SCL_OV7610,	/* 7610, 76BE, 7620AE (for now) */
-	SCL_OV7620,
-	SCL_OV6620,	
-	SCL_OV6630,	/* 6630, 6630AE, 6630AF */
-	SCL_OV8600,
-	SCL_KS0127,	/* SEN_KS0127, SEN_KS0127B */
-	SCL_SAA7111A,
-};
-#endif
-
 enum {
 	STATE_SCANNING,		/* Scanning for start */
 	STATE_HEADER,		/* Parsing header */
@@ -311,7 +296,6 @@ enum {
 enum {
 	BUF_NOT_ALLOCATED,
 	BUF_ALLOCATED,
-	BUF_PEND_DEALLOC,	/* ov511->buf_timer is set */
 };
 
 /* --------- Definition of ioctl interface --------- */
@@ -521,7 +505,6 @@ struct usb_ov511 {
 	int bridge;		/* Type of bridge (BRG_*) */
 	int bclass;		/* Class of bridge (BCL_*) */
 	int sensor;		/* Type of image sensor chip (SEN_*) */
-	int sclass;		/* Type of image sensor chip (SCL_*) */
 
 	int packet_size;	/* Frame size per isoc desc */
 	int packet_numbering;	/* Is ISO frame numbering enabled? */
@@ -537,7 +520,6 @@ struct usb_ov511 {
 	/* Framebuffer/sbuf management */
 	int buf_state;
 	struct semaphore buf_lock;
-	struct timer_list buf_timer;
 
 	struct ov51x_decomp_ops *decomp_ops;