ARM: pxa: enable MULTI_IRQ_HANDLER for all boards

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

arch/arm/Kconfig

@@ -619,6 +619,7 @@ config ARCH_PXA
 	select PLAT_PXA
 	select SPARSE_IRQ
 	select AUTO_ZRELADDR
+	select MULTI_IRQ_HANDLER
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 

arch/arm/mach-pxa/balloon3.c

@@ -825,6 +825,7 @@ MACHINE_START(BALLOON3, "Balloon3")
 	.map_io		= balloon3_map_io,
 	.nr_irqs	= BALLOON3_NR_IRQS,
 	.init_irq	= balloon3_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= balloon3_init,
 	.boot_params	= PLAT_PHYS_OFFSET + 0x100,

arch/arm/mach-pxa/capc7117.c

@@ -151,6 +151,7 @@ MACHINE_START(CAPC7117,
 	.boot_params = 0xa0000100,
 	.map_io = pxa3xx_map_io,
 	.init_irq = pxa3xx_init_irq,
+	.handle_irq = pxa3xx_handle_irq,
 	.timer = &pxa_timer,
 	.init_machine = capc7117_init
 MACHINE_END

arch/arm/mach-pxa/cm-x2xx.c

@@ -517,6 +517,8 @@ MACHINE_START(ARMCORE, "Compulab CM-X2XX")
 	.map_io		= cmx2xx_map_io,
 	.nr_irqs	= CMX2XX_NR_IRQS,
 	.init_irq	= cmx2xx_init_irq,
+	/* NOTE: pxa25x_handle_irq() works on PXA27x w/o camera support */
+	.handle_irq	= pxa25x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= cmx2xx_init,
 MACHINE_END

arch/arm/mach-pxa/cm-x300.c

@@ -859,6 +859,7 @@ MACHINE_START(CM_X300, "CM-X300 module")
 	.boot_params	= 0xa0000100,
 	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
+	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= cm_x300_init,
 	.fixup		= cm_x300_fixup,

arch/arm/mach-pxa/colibri-pxa270.c

@@ -310,6 +310,7 @@ MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
 	.init_machine	= colibri_pxa270_init,
 	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
 
@@ -318,6 +319,7 @@ MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
 	.init_machine	= colibri_pxa270_income_init,
 	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
 

arch/arm/mach-pxa/colibri-pxa300.c

@@ -187,6 +187,7 @@ MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
 	.init_machine	= colibri_pxa300_init,
 	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
+	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
 

arch/arm/mach-pxa/colibri-pxa320.c

@@ -257,6 +257,7 @@ MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
 	.init_machine	= colibri_pxa320_init,
 	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
+	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
 

arch/arm/mach-pxa/corgi.c

@@ -722,6 +722,7 @@ MACHINE_START(CORGI, "SHARP Corgi")
 	.fixup		= fixup_corgi,
 	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
 	.init_machine	= corgi_init,
 	.timer		= &pxa_timer,
 MACHINE_END
@@ -732,6 +733,7 @@ MACHINE_START(SHEPHERD, "SHARP Shepherd")
 	.fixup		= fixup_corgi,
 	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
 	.init_machine	= corgi_init,
 	.timer		= &pxa_timer,
 MACHINE_END
@@ -742,6 +744,7 @@ MACHINE_START(HUSKY, "SHARP Husky")
 	.fixup		= fixup_corgi,
 	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
 	.init_machine	= corgi_init,
 	.timer		= &pxa_timer,
 MACHINE_END

arch/arm/mach-pxa/csb726.c

@@ -275,6 +275,7 @@ MACHINE_START(CSB726, "Cogent CSB726")
 	.boot_params	= 0xa0000100,
 	.map_io         = pxa27x_map_io,
 	.init_irq       = pxa27x_init_irq,
+	.handle_irq       = pxa27x_handle_irq,
 	.init_machine   = csb726_init,
 	.timer          = &pxa_timer,
 MACHINE_END

arch/arm/mach-pxa/em-x270.c

@@ -1302,6 +1302,7 @@ MACHINE_START(EM_X270, "Compulab EM-X270")
 	.boot_params	= 0xa0000100,
 	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= em_x270_init,
 MACHINE_END
@@ -1310,6 +1311,7 @@ MACHINE_START(EXEDA, "Compulab eXeda")
 	.boot_params	= 0xa0000100,
 	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= em_x270_init,
 MACHINE_END

arch/arm/mach-pxa/eseries.c

@@ -193,6 +193,7 @@ MACHINE_START(E330, "Toshiba e330")
 	.map_io		= pxa25x_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
 	.fixup		= eseries_fixup,
 	.init_machine	= e330_init,
 	.timer		= &pxa_timer,
@@ -242,6 +243,7 @@ MACHINE_START(E350, "Toshiba e350")
 	.map_io		= pxa25x_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
 	.fixup		= eseries_fixup,
 	.init_machine	= e350_init,
 	.timer		= &pxa_timer,
@@ -364,6 +366,7 @@ MACHINE_START(E400, "Toshiba e400")
 	.map_io		= pxa25x_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
 	.fixup		= eseries_fixup,
 	.init_machine	= e400_init,
 	.timer		= &pxa_timer,
@@ -552,6 +555,7 @@ MACHINE_START(E740, "Toshiba e740")
 	.map_io		= pxa25x_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
 	.fixup		= eseries_fixup,
 	.init_machine	= e740_init,
 	.timer		= &pxa_timer,
@@ -743,6 +747,7 @@ MACHINE_START(E750, "Toshiba e750")
 	.map_io		= pxa25x_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
 	.fixup		= eseries_fixup,
 	.init_machine	= e750_init,
 	.timer		= &pxa_timer,
@@ -947,6 +952,7 @@ MACHINE_START(E800, "Toshiba e800")
 	.map_io		= pxa25x_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
 	.fixup		= eseries_fixup,
 	.init_machine	= e800_init,
 	.timer		= &pxa_timer,

arch/arm/mach-pxa/ezx.c

@@ -801,6 +801,7 @@ MACHINE_START(EZX_A780, "Motorola EZX A780")
 	.map_io         = pxa27x_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
+	.handle_irq       = pxa27x_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = a780_init,
 MACHINE_END
@@ -866,6 +867,7 @@ MACHINE_START(EZX_E680, "Motorola EZX E680")
 	.map_io         = pxa27x_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
+	.handle_irq       = pxa27x_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = e680_init,
 MACHINE_END
@@ -931,6 +933,7 @@ MACHINE_START(EZX_A1200, "Motorola EZX A1200")
 	.map_io         = pxa27x_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
+	.handle_irq       = pxa27x_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = a1200_init,
 MACHINE_END
@@ -1121,6 +1124,7 @@ MACHINE_START(EZX_A910, "Motorola EZX A910")
 	.map_io         = pxa27x_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
+	.handle_irq       = pxa27x_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = a910_init,
 MACHINE_END
@@ -1186,6 +1190,7 @@ MACHINE_START(EZX_E6, "Motorola EZX E6")
 	.map_io         = pxa27x_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
+	.handle_irq       = pxa27x_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = e6_init,
 MACHINE_END
@@ -1225,6 +1230,7 @@ MACHINE_START(EZX_E2, "Motorola EZX E2")
 	.map_io         = pxa27x_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
+	.handle_irq       = pxa27x_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = e2_init,
 MACHINE_END

arch/arm/mach-pxa/gumstix.c

@@ -236,6 +236,7 @@ MACHINE_START(GUMSTIX, "Gumstix")
 	.boot_params	= 0xa0000100, /* match u-boot bi_boot_params */
 	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= gumstix_init,
 MACHINE_END

arch/arm/mach-pxa/h5000.c

@@ -28,6 +28,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/irq.h>
 
 #include <mach/pxa25x.h>
 #include <mach/h5000.h>
@@ -205,6 +206,7 @@ MACHINE_START(H5400, "HP iPAQ H5000")
 	.boot_params = 0xa0000100,
 	.map_io = pxa25x_map_io,
 	.init_irq = pxa25x_init_irq,
+	.handle_irq = pxa25x_handle_irq,
 	.timer = &pxa_timer,
 	.init_machine = h5000_init,
 MACHINE_END

arch/arm/mach-pxa/himalaya.c

@@ -161,6 +161,7 @@ MACHINE_START(HIMALAYA, "HTC Himalaya")
 	.boot_params = 0xa0000100,
 	.map_io = pxa25x_map_io,
 	.init_irq = pxa25x_init_irq,
+	.handle_irq = pxa25x_handle_irq,
 	.init_machine = himalaya_init,
 	.timer = &pxa_timer,
 MACHINE_END

arch/arm/mach-pxa/hx4700.c

@@ -874,6 +874,7 @@ MACHINE_START(H4700, "HP iPAQ HX4700")
 	.map_io       = pxa27x_map_io,
 	.nr_irqs      = HX4700_NR_IRQS,
 	.init_irq     = pxa27x_init_irq,
+	.handle_irq     = pxa27x_handle_irq,
 	.init_machine = hx4700_init,
 	.timer        = &pxa_timer,
 MACHINE_END

arch/arm/mach-pxa/icontrol.c

@@ -194,6 +194,7 @@ MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
 	.boot_params	= 0xa0000100,
 	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
+	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= icontrol_init
 MACHINE_END

arch/arm/mach-pxa/idp.c

@@ -196,6 +196,7 @@ MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
 	/* Maintainer: Vibren Technologies */
 	.map_io		= idp_map_io,
 	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= idp_init,
 MACHINE_END

arch/arm/mach-pxa/include/mach/pxa25x.h

@@ -11,4 +11,7 @@ extern void __init pxa25x_init_irq(void);
 #ifdef CONFIG_CPU_PXA26x
 extern void __init pxa26x_init_irq(void);
 #endif
+
+#define pxa25x_handle_irq	icip_handle_irq
+
 #endif /* __MACH_PXA25x_H */

arch/arm/mach-pxa/include/mach/pxa27x.h

@@ -22,4 +22,6 @@ extern void __init pxa27x_map_io(void);
 extern void __init pxa27x_init_irq(void);
 extern int __init pxa27x_set_pwrmode(unsigned int mode);
 
+#define pxa27x_handle_irq	ichp_handle_irq
+
 #endif /* __MACH_PXA27x_H */

arch/arm/mach-pxa/include/mach/pxa3xx.h

@@ -8,4 +8,7 @@
 extern void __init pxa3xx_map_io(void);
 extern void __init pxa3xx_init_irq(void);
 extern void __init pxa95x_init_irq(void);
+
+#define pxa3xx_handle_irq	ichp_handle_irq
+
 #endif /* __MACH_PXA3XX_H */

arch/arm/mach-pxa/littleton.c

@@ -441,6 +441,7 @@ MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleto
 	.map_io		= pxa3xx_map_io,
 	.nr_irqs	= LITTLETON_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
+	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= littleton_init,
 MACHINE_END

arch/arm/mach-pxa/lpd270.c

@@ -503,6 +503,7 @@ MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
 	.map_io		= lpd270_map_io,
 	.nr_irqs	= LPD270_NR_IRQS,
 	.init_irq	= lpd270_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= lpd270_init,
 MACHINE_END

arch/arm/mach-pxa/lubbock.c

@@ -553,6 +553,7 @@ MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
 	.map_io		= lubbock_map_io,
 	.nr_irqs	= LUBBOCK_NR_IRQS,
 	.init_irq	= lubbock_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= lubbock_init,
 MACHINE_END

arch/arm/mach-pxa/magician.c

@@ -768,6 +768,7 @@ MACHINE_START(MAGICIAN, "HTC Magician")
 	.map_io = pxa27x_map_io,
 	.nr_irqs = MAGICIAN_NR_IRQS,
 	.init_irq = pxa27x_init_irq,
+	.handle_irq = pxa27x_handle_irq,
 	.init_machine = magician_init,
 	.timer = &pxa_timer,
 MACHINE_END

arch/arm/mach-pxa/mainstone.c

@@ -620,6 +620,7 @@ MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
 	.map_io		= mainstone_map_io,
 	.nr_irqs	= MAINSTONE_NR_IRQS,
 	.init_irq	= mainstone_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= mainstone_init,
 MACHINE_END

arch/arm/mach-pxa/mioa701.c

@@ -794,6 +794,7 @@ MACHINE_START(MIOA701, "MIO A701")
 	.boot_params	= 0xa0000100,
 	.map_io		= &pxa27x_map_io,
 	.init_irq	= &pxa27x_init_irq,
+	.handle_irq	= &pxa27x_handle_irq,
 	.init_machine	= mioa701_machine_init,
 	.timer		= &pxa_timer,
 MACHINE_END

arch/arm/mach-pxa/mp900.c

@@ -96,6 +96,7 @@ MACHINE_START(NEC_MP900, "MobilePro900/C")
 	.timer		= &pxa_timer,
 	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
 	.init_machine	= mp900c_init,
 MACHINE_END
 

arch/arm/mach-pxa/palmld.c

@@ -345,6 +345,7 @@ MACHINE_START(PALMLD, "Palm LifeDrive")
 	.boot_params	= 0xa0000100,
 	.map_io		= palmld_map_io,
 	.init_irq	= pxa27x_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= palmld_init
 MACHINE_END

arch/arm/mach-pxa/palmt5.c

@@ -206,6 +206,7 @@ MACHINE_START(PALMT5, "Palm Tungsten|T5")
 	.map_io		= pxa27x_map_io,
 	.reserve	= palmt5_reserve,
 	.init_irq	= pxa27x_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= palmt5_init
 MACHINE_END

arch/arm/mach-pxa/palmtc.c

@@ -540,6 +540,7 @@ MACHINE_START(PALMTC, "Palm Tungsten|C")
 	.boot_params 	= 0xa0000100,
 	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= palmtc_init
 MACHINE_END

arch/arm/mach-pxa/palmte2.c

@@ -359,6 +359,7 @@ MACHINE_START(PALMTE2, "Palm Tungsten|E2")
 	.boot_params	= 0xa0000100,
 	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= palmte2_init
 MACHINE_END

arch/arm/mach-pxa/palmtreo.c

@@ -444,6 +444,7 @@ MACHINE_START(TREO680, "Palm Treo 680")
 	.map_io         = pxa27x_map_io,
 	.reserve	= treo_reserve,
 	.init_irq       = pxa27x_init_irq,
+	.handle_irq       = pxa27x_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = treo680_init,
 MACHINE_END
@@ -453,6 +454,7 @@ MACHINE_START(CENTRO, "Palm Centro 685")
 	.map_io         = pxa27x_map_io,
 	.reserve	= treo_reserve,
 	.init_irq       = pxa27x_init_irq,
+	.handle_irq       = pxa27x_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine	= centro_init,
 MACHINE_END

arch/arm/mach-pxa/palmtx.c

@@ -367,6 +367,7 @@ MACHINE_START(PALMTX, "Palm T|X")
 	.boot_params	= 0xa0000100,
 	.map_io		= palmtx_map_io,
 	.init_irq	= pxa27x_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= palmtx_init
 MACHINE_END

arch/arm/mach-pxa/palmz72.c

@@ -401,6 +401,7 @@ MACHINE_START(PALMZ72, "Palm Zire72")
 	.boot_params	= 0xa0000100,
 	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= palmz72_init
 MACHINE_END

arch/arm/mach-pxa/pcm027.c

@@ -262,6 +262,7 @@ MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270")
 	.map_io		= pcm027_map_io,
 	.nr_irqs	= PCM027_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= pcm027_init,
 MACHINE_END

arch/arm/mach-pxa/poodle.c

@@ -468,6 +468,7 @@ MACHINE_START(POODLE, "SHARP Poodle")
 	.map_io		= pxa25x_map_io,
 	.nr_irqs	= POODLE_NR_IRQS,	/* 4 for LoCoMo */
 	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= poodle_init,
 MACHINE_END

arch/arm/mach-pxa/raumfeld.c

@@ -1088,6 +1088,7 @@ MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
 	.init_machine	= raumfeld_controller_init,
 	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
+	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
 #endif
@@ -1098,6 +1099,7 @@ MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
 	.init_machine	= raumfeld_connector_init,
 	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
+	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
 #endif
@@ -1108,6 +1110,7 @@ MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
 	.init_machine	= raumfeld_speaker_init,
 	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
+	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
 #endif

arch/arm/mach-pxa/saar.c

@@ -599,6 +599,7 @@ MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa3xx_map_io,
 	.init_irq       = pxa3xx_init_irq,
+	.handle_irq       = pxa3xx_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = saar_init,
 MACHINE_END

arch/arm/mach-pxa/saarb.c

@@ -107,6 +107,7 @@ MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)")
 	.map_io         = pxa_map_io,
 	.nr_irqs	= SAARB_NR_IRQS,
 	.init_irq       = pxa95x_init_irq,
+	.handle_irq	= pxa3xx_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = saarb_init,
 MACHINE_END

arch/arm/mach-pxa/spitz.c

@@ -984,6 +984,7 @@ MACHINE_START(SPITZ, "SHARP Spitz")
 	.fixup		= spitz_fixup,
 	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
 	.init_machine	= spitz_init,
 	.timer		= &pxa_timer,
 MACHINE_END
@@ -994,6 +995,7 @@ MACHINE_START(BORZOI, "SHARP Borzoi")
 	.fixup		= spitz_fixup,
 	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
 	.init_machine	= spitz_init,
 	.timer		= &pxa_timer,
 MACHINE_END
@@ -1004,6 +1006,7 @@ MACHINE_START(AKITA, "SHARP Akita")
 	.fixup		= spitz_fixup,
 	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
 	.init_machine	= spitz_init,
 	.timer		= &pxa_timer,
 MACHINE_END

arch/arm/mach-pxa/stargate2.c

@@ -1001,6 +1001,7 @@ static void __init stargate2_init(void)
 MACHINE_START(INTELMOTE2, "IMOTE 2")
 	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= imote2_init,
 	.boot_params	= 0xA0000100,
@@ -1012,6 +1013,7 @@ MACHINE_START(STARGATE2, "Stargate 2")
 	.map_io = pxa27x_map_io,
 	.nr_irqs = STARGATE_NR_IRQS,
 	.init_irq = pxa27x_init_irq,
+	.handle_irq = pxa27x_handle_irq,
 	.timer = &pxa_timer,
 	.init_machine = stargate2_init,
 	.boot_params = 0xA0000100,

arch/arm/mach-pxa/tavorevb.c

@@ -492,6 +492,7 @@ MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa3xx_map_io,
 	.init_irq       = pxa3xx_init_irq,
+	.handle_irq       = pxa3xx_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = tavorevb_init,
 MACHINE_END

arch/arm/mach-pxa/tavorevb3.c

@@ -129,6 +129,7 @@ MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
 	.map_io         = pxa3xx_map_io,
 	.nr_irqs	= TAVOREVB3_NR_IRQS,
 	.init_irq       = pxa3xx_init_irq,
+	.handle_irq       = pxa3xx_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = evb3_init,
 MACHINE_END

arch/arm/mach-pxa/tosa.c

@@ -974,6 +974,7 @@ MACHINE_START(TOSA, "SHARP Tosa")
 	.map_io         = pxa25x_map_io,
 	.nr_irqs	= TOSA_NR_IRQS,
 	.init_irq       = pxa25x_init_irq,
+	.handle_irq       = pxa25x_handle_irq,
 	.init_machine   = tosa_init,
 	.timer          = &pxa_timer,
 MACHINE_END

arch/arm/mach-pxa/trizeps4.c

@@ -558,6 +558,7 @@ MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
 	.init_machine	= trizeps4_init,
 	.map_io		= trizeps4_map_io,
 	.init_irq	= pxa27x_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
 
@@ -567,5 +568,6 @@ MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
 	.init_machine	= trizeps4_init,
 	.map_io		= trizeps4_map_io,
 	.init_irq	= pxa27x_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 MACHINE_END

arch/arm/mach-pxa/viper.c

@@ -995,6 +995,7 @@ MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
 	.boot_params	= 0xa0000100,
 	.map_io		= viper_map_io,
 	.init_irq	= viper_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine	= viper_init,
 MACHINE_END

arch/arm/mach-pxa/vpac270.c

@@ -719,6 +719,7 @@ MACHINE_START(VPAC270, "Voipac PXA270")
 	.boot_params	= 0xa0000100,
 	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= vpac270_init
 MACHINE_END

arch/arm/mach-pxa/xcep.c

@@ -184,6 +184,7 @@ MACHINE_START(XCEP, "Iskratel XCEP")
 	.init_machine	= xcep_init,
 	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
 

arch/arm/mach-pxa/z2.c

@@ -704,6 +704,7 @@ MACHINE_START(ZIPIT2, "Zipit Z2")
 	.boot_params	= 0xa0000100,
 	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= z2_init,
 MACHINE_END

arch/arm/mach-pxa/zeus.c

@@ -907,6 +907,7 @@ MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS")
 	.map_io		= zeus_map_io,
 	.nr_irqs	= ZEUS_NR_IRQS,
 	.init_irq	= zeus_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= zeus_init,
 MACHINE_END

arch/arm/mach-pxa/zylonite.c

@@ -426,6 +426,7 @@ MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
 	.map_io		= pxa3xx_map_io,
 	.nr_irqs	= ZYLONITE_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
+	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= zylonite_init,
 MACHINE_END