Commit 8b108c60 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (59 commits)
  HID: fix up 'EMBEDDED' mess in Kconfig
  HID: roccat: cleanup preprocessor macros
  HID: roccat: refactor special event handling
  HID: roccat: fix special button support
  HID: roccat: Correctly mark init and exit functions
  HID: hidraw: Use Interrupt Endpoint for OUT Transfers if Available
  HID: hid-samsung: remove redundant key mappings
  HID: add omitted hid-zydacron.c file
  HID: hid-samsung: add support for Creative Desktop Wireless 6000
  HID: picolcd: Eliminate use after free
  HID: Zydacron Remote Control driver
  HID: Use kmemdup
  HID: magicmouse: fix input registration
  HID: make Prodikeys driver standalone config option
  HID: Prodikeys PC-MIDI HID Driver
  HID: hidraw: fix indentation
  HID: ntrig: add filtering module parameters
  HID: ntrig: add sysfs access to filter parameters
  HID: ntrig: add sensitivity and responsiveness support
  HID: add multi-input quirk for eGalax Touchcontroller
  ...
parents 7ce1418f 73d5e8f7
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/operation_mode
Date: March 2010
Contact: Bruno Prémont <bonbons@linux-vserver.org>
Description: Make it possible to switch the PicoLCD device between LCD
(firmware) and bootloader (flasher) operation modes.
Reading: returns list of available modes, the active mode being
enclosed in brackets ('[' and ']')
Writing: causes operation mode switch. Permitted values are
the non-active mode names listed when read.
Note: when switching mode the current PicoLCD HID device gets
disconnected and reconnects after above delay (see attribute
operation_mode_delay for its value).
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/operation_mode_delay
Date: April 2010
Contact: Bruno Prémont <bonbons@linux-vserver.org>
Description: Delay PicoLCD waits before restarting in new mode when
operation_mode has changed.
Reading/Writing: It is expressed in ms and permitted range is
0..30000ms.
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/fb_update_rate
Date: March 2010
Contact: Bruno Prémont <bonbons@linux-vserver.org>
Description: Make it possible to adjust defio refresh rate.
Reading: returns list of available refresh rates (expressed in Hz),
the active refresh rate being enclosed in brackets ('[' and ']')
Writing: accepts new refresh rate expressed in integer Hz
within permitted rates.
Note: As device can barely do 2 complete refreshes a second
it only makes sense to adjust this value if only one or two
tiles get changed and it's not appropriate to expect the application
to flush it's tiny changes explicitely at higher than default rate.
What: /sys/bus/hid/drivers/prodikeys/.../channel
Date: April 2010
KernelVersion: 2.6.34
Contact: Don Prince <dhprince.devel@yahoo.co.uk>
Description:
Allows control (via software) the midi channel to which
that the pc-midi keyboard will output.midi data.
Range: 0..15
Type: Read/write
What: /sys/bus/hid/drivers/prodikeys/.../sustain
Date: April 2010
KernelVersion: 2.6.34
Contact: Don Prince <dhprince.devel@yahoo.co.uk>
Description:
Allows control (via software) the sustain duration of a
note held by the pc-midi driver.
0 means sustain mode is disabled.
Range: 0..5000 (milliseconds)
Type: Read/write
What: /sys/bus/hid/drivers/prodikeys/.../octave
Date: April 2010
KernelVersion: 2.6.34
Contact: Don Prince <dhprince.devel@yahoo.co.uk>
Description:
Controls the octave shift modifier in the pc-midi driver.
The octave can be shifted via software up/down 2 octaves.
0 means the no ocatve shift.
Range: -2..2 (minus 2 to plus 2)
Type: Read/Write
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/actual_dpi
Date: March 2010
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: It is possible to switch the dpi setting of the mouse with the
press of a button.
When read, this file returns the raw number of the actual dpi
setting reported by the mouse. This number has to be further
processed to receive the real dpi value.
VALUE DPI
1 800
2 1200
3 1600
4 2000
5 2400
6 3200
This file is readonly.
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/actual_profile
Date: March 2010
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: When read, this file returns the number of the actual profile.
This file is readonly.
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/firmware_version
Date: March 2010
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: When read, this file returns the raw integer version number of the
firmware reported by the mouse. Using the integer value eases
further usage in other programs. To receive the real version
number the decimal point has to be shifted 2 positions to the
left. E.g. a returned value of 138 means 1.38
This file is readonly.
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/kone_driver_version
Date: March 2010
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: When read, this file returns the driver version.
The format of the string is "v<major>.<minor>.<patchlevel>".
This attribute is used by the userland tools to find the sysfs-
paths of installed kone-mice and determine the capabilites of
the driver. Versions of this driver for old kernels replace
usbhid instead of generic-usb. The way to scan for this file
has been chosen to provide a consistent way for all supported
kernel versions.
This file is readonly.
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/profile[1-5]
Date: March 2010
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can store 5 profiles which can be switched by the
press of a button. A profile holds informations like button
mappings, sensitivity, the colors of the 5 leds and light
effects.
When read, these files return the respective profile. The
returned data is 975 bytes in size.
When written, this file lets one write the respective profile
data back to the mouse. The data has to be 975 bytes long.
The mouse will reject invalid data, whereas the profile number
stored in the profile doesn't need to fit the number of the
store.
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/settings
Date: March 2010
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: When read, this file returns the settings stored in the mouse.
The size of the data is 36 bytes and holds information like the
startup_profile, tcu state and calibration_data.
When written, this file lets write settings back to the mouse.
The data has to be 36 bytes long. The mouse will reject invalid
data.
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/startup_profile
Date: March 2010
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The integer value of this attribute ranges from 1 to 5.
When read, this attribute returns the number of the profile
that's active when the mouse is powered on.
When written, this file sets the number of the startup profile
and the mouse activates this profile immediately.
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/tcu
Date: March 2010
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse has a "Tracking Control Unit" which lets the user
calibrate the laser power to fit the mousepad surface.
When read, this file returns the current state of the TCU,
where 0 means off and 1 means on.
Writing 0 in this file will switch the TCU off.
Writing 1 in this file will start the calibration which takes
around 6 seconds to complete and activates the TCU.
What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/weight
Date: March 2010
Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
Description: The mouse can be equipped with one of four supplied weights
ranging from 5 to 20 grams which are recognized by the mouse
and its value can be read out. When read, this file returns the
raw value returned by the mouse which eases further processing
in other software.
The values map to the weights as follows:
VALUE WEIGHT
0 none
1 5g
2 10g
3 15g
4 20g
This file is readonly.
What: /sys/class/hidraw/hidraw*/device/speed
Date: April 2010
Kernel Version: 2.6.35
Contact: linux-bluetooth@vger.kernel.org
Description:
The /sys/class/hidraw/hidraw*/device/speed file controls
reporting speed of wacom bluetooth tablet. Reading from
this file returns 1 if tablet reports in high speed mode
or 0 otherwise. Writing to this file one of these values
switches reporting speed.
...@@ -86,6 +86,12 @@ config HID_BELKIN ...@@ -86,6 +86,12 @@ config HID_BELKIN
---help--- ---help---
Support for Belkin Flip KVM and Wireless keyboard. Support for Belkin Flip KVM and Wireless keyboard.
config HID_CANDO
tristate "Cando dual touch panel"
depends on USB_HID
---help---
Support for Cando dual touch panel.
config HID_CHERRY config HID_CHERRY
tristate "Cherry" if EMBEDDED tristate "Cherry" if EMBEDDED
depends on USB_HID depends on USB_HID
...@@ -100,6 +106,21 @@ config HID_CHICONY ...@@ -100,6 +106,21 @@ config HID_CHICONY
---help--- ---help---
Support for Chicony Tactical pad. Support for Chicony Tactical pad.
config HID_PRODIKEYS
tristate "Prodikeys PC-MIDI Keyboard support"
depends on USB_HID && SND
select SND_RAWMIDI
---help---
Support for Prodikeys PC-MIDI Keyboard device support.
Say Y here to enable support for this device.
- Prodikeys PC-MIDI keyboard.
The Prodikeys PC-MIDI acts as a USB Audio device, with one MIDI
input and one MIDI output. These MIDI jacks appear as
a sound "card" in the ALSA sound system.
Note: if you say N here, this device will still function as a basic
multimedia keyboard, but will lack support for the musical keyboard
and some additional multimedia keys.
config HID_CYPRESS config HID_CYPRESS
tristate "Cypress" if EMBEDDED tristate "Cypress" if EMBEDDED
depends on USB_HID depends on USB_HID
...@@ -108,9 +129,8 @@ config HID_CYPRESS ...@@ -108,9 +129,8 @@ config HID_CYPRESS
Support for cypress mouse and barcode readers. Support for cypress mouse and barcode readers.
config HID_DRAGONRISE config HID_DRAGONRISE
tristate "DragonRise Inc. support" if EMBEDDED tristate "DragonRise Inc. support"
depends on USB_HID depends on USB_HID
default !EMBEDDED
---help--- ---help---
Say Y here if you have DragonRise Inc.game controllers. Say Y here if you have DragonRise Inc.game controllers.
...@@ -122,6 +142,12 @@ config DRAGONRISE_FF ...@@ -122,6 +142,12 @@ config DRAGONRISE_FF
Say Y here if you want to enable force feedback support for DragonRise Inc. Say Y here if you want to enable force feedback support for DragonRise Inc.
game controllers. game controllers.
config HID_EGALAX
tristate "eGalax multi-touch panel"
depends on USB_HID
---help---
Support for the eGalax dual-touch panel.
config HID_EZKEY config HID_EZKEY
tristate "Ezkey" if EMBEDDED tristate "Ezkey" if EMBEDDED
depends on USB_HID depends on USB_HID
...@@ -137,16 +163,14 @@ config HID_KYE ...@@ -137,16 +163,14 @@ config HID_KYE
Support for Kye/Genius Ergo Mouse. Support for Kye/Genius Ergo Mouse.
config HID_GYRATION config HID_GYRATION
tristate "Gyration" if EMBEDDED tristate "Gyration"
depends on USB_HID depends on USB_HID
default !EMBEDDED
---help--- ---help---
Support for Gyration remote control. Support for Gyration remote control.
config HID_TWINHAN config HID_TWINHAN
tristate "Twinhan" if EMBEDDED tristate "Twinhan"
depends on USB_HID depends on USB_HID
default !EMBEDDED
---help--- ---help---
Support for Twinhan IR remote control. Support for Twinhan IR remote control.
...@@ -233,16 +257,14 @@ config HID_NTRIG ...@@ -233,16 +257,14 @@ config HID_NTRIG
Support for N-Trig touch screen. Support for N-Trig touch screen.
config HID_ORTEK config HID_ORTEK
tristate "Ortek" if EMBEDDED tristate "Ortek"
depends on USB_HID depends on USB_HID
default !EMBEDDED
---help--- ---help---
Support for Ortek WKB-2000 wireless keyboard + mouse trackpad. Support for Ortek WKB-2000 wireless keyboard + mouse trackpad.
config HID_PANTHERLORD config HID_PANTHERLORD
tristate "Pantherlord support" if EMBEDDED tristate "Pantherlord support"
depends on USB_HID depends on USB_HID
default !EMBEDDED
---help--- ---help---
Say Y here if you have a PantherLord/GreenAsia based game controller Say Y here if you have a PantherLord/GreenAsia based game controller
or adapter. or adapter.
...@@ -256,29 +278,90 @@ config PANTHERLORD_FF ...@@ -256,29 +278,90 @@ config PANTHERLORD_FF
or adapter and want to enable force feedback support for it. or adapter and want to enable force feedback support for it.
config HID_PETALYNX config HID_PETALYNX
tristate "Petalynx" if EMBEDDED tristate "Petalynx"
depends on USB_HID depends on USB_HID
default !EMBEDDED
---help--- ---help---
Support for Petalynx Maxter remote control. Support for Petalynx Maxter remote control.
config HID_PICOLCD
tristate "PicoLCD (graphic version)"
depends on USB_HID
---help---
This provides support for Minibox PicoLCD devices, currently
only the graphical ones are supported.
This includes support for the following device features:
- Keypad
- Switching between Firmware and Flash mode
- EEProm / Flash access (via debugfs)
Features selectively enabled:
- Framebuffer for monochrome 256x64 display
- Backlight control
- Contrast control
- General purpose outputs
Features that are not (yet) supported:
- IR
config HID_PICOLCD_FB
bool "Framebuffer support" if EMBEDDED
default !EMBEDDED
depends on HID_PICOLCD
depends on HID_PICOLCD=FB || FB=y
select FB_DEFERRED_IO
select FB_SYS_FILLRECT
select FB_SYS_COPYAREA
select FB_SYS_IMAGEBLIT
select FB_SYS_FOPS
---help---
Provide access to PicoLCD's 256x64 monochrome display via a
frambuffer device.
config HID_PICOLCD_BACKLIGHT
bool "Backlight control" if EMBEDDED
default !EMBEDDED
depends on HID_PICOLCD
depends on HID_PICOLCD=BACKLIGHT_CLASS_DEVICE || BACKLIGHT_CLASS_DEVICE=y
---help---
Provide access to PicoLCD's backlight control via backlight
class.
config HID_PICOLCD_LCD
bool "Contrast control" if EMBEDDED
default !EMBEDDED
depends on HID_PICOLCD
depends on HID_PICOLCD=LCD_CLASS_DEVICE || LCD_CLASS_DEVICE=y
---help---
Provide access to PicoLCD's LCD contrast via lcd class.
config HID_PICOLCD_LEDS
bool "GPO via leds class" if EMBEDDED
default !EMBEDDED
depends on HID_PICOLCD
depends on HID_PICOLCD=LEDS_CLASS || LEDS_CLASS=y
---help---
Provide access to PicoLCD's GPO pins via leds class.
config HID_QUANTA config HID_QUANTA
tristate "Quanta Optical Touch" tristate "Quanta Optical Touch"
depends on USB_HID depends on USB_HID
---help--- ---help---
Support for Quanta Optical Touch dual-touch panels. Support for Quanta Optical Touch dual-touch panels.
config HID_ROCCAT_KONE
tristate "Roccat Kone Mouse support"
depends on USB_HID
---help---
Support for Roccat Kone mouse.
config HID_SAMSUNG config HID_SAMSUNG
tristate "Samsung" if EMBEDDED tristate "Samsung"
depends on USB_HID depends on USB_HID
default !EMBEDDED
---help--- ---help---
Support for Samsung InfraRed remote control. Support for Samsung InfraRed remote control or keyboards.
config HID_SONY config HID_SONY
tristate "Sony" if EMBEDDED tristate "Sony"
depends on USB_HID depends on USB_HID
default !EMBEDDED
---help--- ---help---
Support for Sony PS3 controller. Support for Sony PS3 controller.
...@@ -289,16 +372,14 @@ config HID_STANTUM ...@@ -289,16 +372,14 @@ config HID_STANTUM
Support for Stantum multitouch panel. Support for Stantum multitouch panel.
config HID_SUNPLUS config HID_SUNPLUS
tristate "Sunplus" if EMBEDDED tristate "Sunplus"
depends on USB_HID depends on USB_HID
default !EMBEDDED
---help--- ---help---
Support for Sunplus wireless desktop. Support for Sunplus wireless desktop.
config HID_GREENASIA config HID_GREENASIA
tristate "GreenAsia (Product ID 0x12) support" if EMBEDDED tristate "GreenAsia (Product ID 0x12) support"
depends on USB_HID depends on USB_HID
default !EMBEDDED
---help--- ---help---
Say Y here if you have a GreenAsia (Product ID 0x12) based game Say Y here if you have a GreenAsia (Product ID 0x12) based game
controller or adapter. controller or adapter.
...@@ -313,9 +394,8 @@ config GREENASIA_FF ...@@ -313,9 +394,8 @@ config GREENASIA_FF
and want to enable force feedback support for it. and want to enable force feedback support for it.
config HID_SMARTJOYPLUS config HID_SMARTJOYPLUS
tristate "SmartJoy PLUS PS2/USB adapter support" if EMBEDDED tristate "SmartJoy PLUS PS2/USB adapter support"
depends on USB_HID depends on USB_HID
default !EMBEDDED
---help--- ---help---
Support for SmartJoy PLUS PS2/USB adapter. Support for SmartJoy PLUS PS2/USB adapter.
...@@ -328,16 +408,14 @@ config SMARTJOYPLUS_FF ...@@ -328,16 +408,14 @@ config SMARTJOYPLUS_FF
enable force feedback support for it. enable force feedback support for it.
config HID_TOPSEED config HID_TOPSEED
tristate "TopSeed Cyberlink remote control support" if EMBEDDED tristate "TopSeed Cyberlink remote control support"
depends on USB_HID depends on USB_HID
default !EMBEDDED
---help--- ---help---
Say Y if you have a TopSeed Cyberlink remote control. Say Y if you have a TopSeed Cyberlink or BTC Emprex remote control.
config HID_THRUSTMASTER config HID_THRUSTMASTER
tristate "ThrustMaster devices support" if EMBEDDED tristate "ThrustMaster devices support"
depends on USB_HID depends on USB_HID
default !EMBEDDED
---help--- ---help---
Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or
a THRUSTMASTER Ferrari GT Rumble Wheel. a THRUSTMASTER Ferrari GT Rumble Wheel.
...@@ -357,10 +435,17 @@ config HID_WACOM ...@@ -357,10 +435,17 @@ config HID_WACOM
---help--- ---help---
Support for Wacom Graphire Bluetooth tablet. Support for Wacom Graphire Bluetooth tablet.
config HID_WACOM_POWER_SUPPLY
bool "Wacom Bluetooth devices power supply status support"
depends on HID_WACOM
select POWER_SUPPLY
---help---
Say Y here if you want to enable power supply status monitoring for
Wacom Bluetooth devices.
config HID_ZEROPLUS config HID_ZEROPLUS
tristate "Zeroplus based game controller support" if EMBEDDED tristate "Zeroplus based game controller support"
depends on USB_HID depends on USB_HID
default !EMBEDDED
---help--- ---help---
Say Y here if you have a Zeroplus based game controller. Say Y here if you have a Zeroplus based game controller.
...@@ -372,6 +457,12 @@ config ZEROPLUS_FF ...@@ -372,6 +457,12 @@ config ZEROPLUS_FF
Say Y here if you have a Zeroplus based game controller and want Say Y here if you have a Zeroplus based game controller and want
to have force feedback support for it. to have force feedback support for it.
config HID_ZYDACRON
tristate "Zydacron remote control support"
depends on USB_HID
---help---
Support for Zydacron remote control.
endmenu endmenu
endif # HID_SUPPORT endif # HID_SUPPORT
...@@ -26,10 +26,12 @@ obj-$(CONFIG_HID_3M_PCT) += hid-3m-pct.o ...@@ -26,10 +26,12 @@ obj-$(CONFIG_HID_3M_PCT) += hid-3m-pct.o
obj-$(CONFIG_HID_A4TECH) += hid-a4tech.o obj-$(CONFIG_HID_A4TECH) += hid-a4tech.o
obj-$(CONFIG_HID_APPLE) += hid-apple.o obj-$(CONFIG_HID_APPLE) += hid-apple.o
obj-$(CONFIG_HID_BELKIN) += hid-belkin.o obj-$(CONFIG_HID_BELKIN) += hid-belkin.o
obj-$(CONFIG_HID_CANDO) += hid-cando.o
obj-$(CONFIG_HID_CHERRY) += hid-cherry.o obj-$(CONFIG_HID_CHERRY) += hid-cherry.o
obj-$(CONFIG_HID_CHICONY) += hid-chicony.o obj-$(CONFIG_HID_CHICONY) += hid-chicony.o
obj-$(CONFIG_HID_CYPRESS) += hid-cypress.o obj-$(CONFIG_HID_CYPRESS) += hid-cypress.o
obj-$(CONFIG_HID_DRAGONRISE) += hid-drff.o obj-$(CONFIG_HID_DRAGONRISE) += hid-drff.o
obj-$(CONFIG_HID_EGALAX) += hid-egalax.o
obj-$(CONFIG_HID_EZKEY) += hid-ezkey.o obj-$(CONFIG_HID_EZKEY) += hid-ezkey.o
obj-$(CONFIG_HID_GYRATION) += hid-gyration.o obj-$(CONFIG_HID_GYRATION) += hid-gyration.o
obj-$(CONFIG_HID_KENSINGTON) += hid-kensington.o obj-$(CONFIG_HID_KENSINGTON) += hid-kensington.o
...@@ -41,9 +43,12 @@ obj-$(CONFIG_HID_MONTEREY) += hid-monterey.o ...@@ -41,9 +43,12 @@ obj-$(CONFIG_HID_MONTEREY) += hid-monterey.o
obj-$(CONFIG_HID_MOSART) += hid-mosart.o obj-$(CONFIG_HID_MOSART) += hid-mosart.o
obj-$(CONFIG_HID_NTRIG) += hid-ntrig.o obj-$(CONFIG_HID_NTRIG) += hid-ntrig.o
obj-$(CONFIG_HID_ORTEK) += hid-ortek.o obj-$(CONFIG_HID_ORTEK) += hid-ortek.o
obj-$(CONFIG_HID_PRODIKEYS) += hid-prodikeys.o
obj-$(CONFIG_HID_QUANTA) += hid-quanta.o obj-$(CONFIG_HID_QUANTA) += hid-quanta.o
obj-$(CONFIG_HID_PANTHERLORD) += hid-pl.o obj-$(CONFIG_HID_PANTHERLORD) += hid-pl.o
obj-$(CONFIG_HID_PETALYNX) += hid-petalynx.o obj-$(CONFIG_HID_PETALYNX) += hid-petalynx.o
obj-$(CONFIG_HID_PICOLCD) += hid-picolcd.o
obj-$(CONFIG_HID_ROCCAT_KONE) += hid-roccat-kone.o
obj-$(CONFIG_HID_SAMSUNG) += hid-samsung.o obj-$(CONFIG_HID_SAMSUNG) += hid-samsung.o
obj-$(CONFIG_HID_SMARTJOYPLUS) += hid-sjoy.o obj-$(CONFIG_HID_SMARTJOYPLUS) += hid-sjoy.o
obj-$(CONFIG_HID_SONY) += hid-sony.o obj-$(CONFIG_HID_SONY) += hid-sony.o
...@@ -54,6 +59,7 @@ obj-$(CONFIG_HID_THRUSTMASTER) += hid-tmff.o ...@@ -54,6 +59,7 @@ obj-$(CONFIG_HID_THRUSTMASTER) += hid-tmff.o
obj-$(CONFIG_HID_TOPSEED) += hid-topseed.o obj-$(CONFIG_HID_TOPSEED) += hid-topseed.o
obj-$(CONFIG_HID_TWINHAN) += hid-twinhan.o obj-$(CONFIG_HID_TWINHAN) += hid-twinhan.o
obj-$(CONFIG_HID_ZEROPLUS) += hid-zpff.o obj-$(CONFIG_HID_ZEROPLUS) += hid-zpff.o
obj-$(CONFIG_HID_ZYDACRON) += hid-zydacron.o
obj-$(CONFIG_HID_WACOM) += hid-wacom.o obj-$(CONFIG_HID_WACOM) += hid-wacom.o
obj-$(CONFIG_USB_HID) += usbhid/ obj-$(CONFIG_USB_HID) += usbhid/
......
/* /*
* HID driver for 3M PCT multitouch panels * HID driver for 3M PCT multitouch panels
* *
* Copyright (c) 2009 Stephane Chatty <chatty@enac.fr> * Copyright (c) 2009-2010 Stephane Chatty <chatty@enac.fr>
* *
*/ */
...@@ -25,7 +25,7 @@ MODULE_LICENSE("GPL"); ...@@ -25,7 +25,7 @@ MODULE_LICENSE("GPL");
#include "hid-ids.h" #include "hid-ids.h"
struct mmm_finger { struct mmm_finger {
__s32 x, y; __s32 x, y, w, h;
__u8 rank; __u8 rank;
bool touch, valid; bool touch, valid;
}; };
...@@ -82,7 +82,18 @@ static int mmm_input_mapping(struct hid_device *hdev, struct hid_input *hi, ...@@ -82,7 +82,18 @@ static int mmm_input_mapping(struct hid_device *hdev, struct hid_input *hi,
/* touchscreen emulation */ /* touchscreen emulation */
hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH); hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
return 1; return 1;
case HID_DG_WIDTH:
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_TOUCH_MAJOR);
return 1;
case HID_DG_HEIGHT:
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_TOUCH_MINOR);
input_set_abs_params(hi->input, ABS_MT_ORIENTATION,
1, 1, 0, 0);
return 1;
case HID_DG_CONTACTID: case HID_DG_CONTACTID:
field->logical_maximum = 59;
hid_map_usage(hi, usage, bit, max, hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_TRACKING_ID); EV_ABS, ABS_MT_TRACKING_ID);
return 1; return 1;
...@@ -128,9 +139,15 @@ static void mmm_filter_event(struct mmm_data *md, struct input_dev *input) ...@@ -128,9 +139,15 @@ static void mmm_filter_event(struct mmm_data *md, struct input_dev *input)
/* this finger is just placeholder data, ignore */ /* this finger is just placeholder data, ignore */
} else if (f->touch) { } else if (f->touch) {
/* this finger is on the screen */ /* this finger is on the screen */
int wide = (f->w > f->h);
input_event(input, EV_ABS, ABS_MT_TRACKING_ID, i); input_event(input, EV_ABS, ABS_MT_TRACKING_ID, i);
input_event(input, EV_ABS, ABS_MT_POSITION_X, f->x); input_event(input, EV_ABS, ABS_MT_POSITION_X, f->x);
input_event(input, EV_ABS, ABS_MT_POSITION_Y, f->y); input_event(input, EV_ABS, ABS_MT_POSITION_Y, f->y);
input_event(input, EV_ABS, ABS_MT_ORIENTATION, wide);
input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR,
wide ? f->w : f->h);
input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR,
wide ? f->h : f->w);
input_mt_sync(input); input_mt_sync(input);
/* /*
* touchscreen emulation: maintain the age rank * touchscreen emulation: maintain the age rank
...@@ -197,6 +214,14 @@ static int mmm_event(struct hid_device *hid, struct hid_field *field, ...@@ -197,6 +214,14 @@ static int mmm_event(struct hid_device *hid, struct hid_field *field,
case HID_DG_CONFIDENCE: case HID_DG_CONFIDENCE:
md->valid = value; md->valid = value;
break; break;
case HID_DG_WIDTH:
if (md->valid)
md->f[md->curid].w = value;
break;
case HID_DG_HEIGHT:
if (md->valid)
md->f[md->curid].h = value;
break;
case HID_DG_CONTACTID: case HID_DG_CONTACTID:
if (md->valid) { if (md->valid) {
md->curid = value; md->curid = value;
...@@ -255,6 +280,7 @@ static void mmm_remove(struct hid_device *hdev) ...@@ -255,6 +280,7 @@ static void mmm_remove(struct hid_device *hdev)
static const struct hid_device_id mmm_devices[] = { static const struct hid_device_id mmm_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M1968) }, { HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M1968) },
{ HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M2256) },
{ } { }
}; };
MODULE_DEVICE_TABLE(hid, mmm_devices); MODULE_DEVICE_TABLE(hid, mmm_devices);
...@@ -287,5 +313,4 @@ static void __exit mmm_exit(void) ...@@ -287,5 +313,4 @@ static void __exit mmm_exit(void)
module_init(mmm_init); module_init(mmm_init);
module_exit(mmm_exit); module_exit(mmm_exit);
MODULE_LICENSE("GPL");
/*
* HID driver for Cando dual-touch panels
*
* Copyright (c) 2010 Stephane Chatty <chatty@enac.fr>
*
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*/
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
#include <linux/slab.h>
MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
MODULE_DESCRIPTION("Cando dual-touch panel");
MODULE_LICENSE("GPL");
#include "hid-ids.h"
struct cando_data {
__u16 x, y;
__u8 id;
__s8 oldest; /* id of the oldest finger in previous frame */
bool valid; /* valid finger data, or just placeholder? */
bool first; /* is this the first finger in this frame? */
__s8 firstid; /* id of the first finger in the frame */
__u16 firstx, firsty; /* (x, y) of the first finger in the frame */
};
static int cando_input_mapping(struct hid_device *hdev, struct hid_input *hi,
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
{
switch (usage->hid & HID_USAGE_PAGE) {
case HID_UP_GENDESK:
switch (usage->hid) {
case HID_GD_X:
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_POSITION_X);
/* touchscreen emulation */
input_set_abs_params(hi->input, ABS_X,
field->logical_minimum,
field->logical_maximum, 0, 0);
return 1;
case HID_GD_Y:
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_POSITION_Y);
/* touchscreen emulation */
input_set_abs_params(hi->input, ABS_Y,
field->logical_minimum,
field->logical_maximum, 0, 0);
return 1;
}
return 0;
case HID_UP_DIGITIZER:
switch (usage->hid) {
case HID_DG_TIPSWITCH:
case HID_DG_CONTACTMAX:
return -1;
case HID_DG_INRANGE:
/* touchscreen emulation */
hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
return 1;
case HID_DG_CONTACTID:
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_TRACKING_ID);
return 1;
}
return 0;
}
return 0;
}
static int cando_input_mapped(struct hid_device *hdev, struct hid_input *hi,
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
{
if (usage->type == EV_KEY || usage->type == EV_ABS)
clear_bit(usage->code, *bit);
return 0;
}
/*
* this function is called when a whole finger has been parsed,
* so that it can decide what to send to the input layer.
*/
static void cando_filter_event(struct cando_data *td, struct input_dev *input)
{
td->first = !td->first; /* touchscreen emulation */
if (!td->valid) {
/*
* touchscreen emulation: if this is the second finger and
* the first was valid, the first was the oldest; if the
* first was not valid and there was a valid finger in the
* previous frame, this is a release.
*/
if (td->first) {
td->firstid = -1;
} else if (td->firstid >= 0) {
input_event(input, EV_ABS, ABS_X, td->firstx);
input_event(input, EV_ABS, ABS_Y, td->firsty);
td->oldest = td->firstid;
} else if (td->oldest >= 0) {
input_event(input, EV_KEY, BTN_TOUCH, 0);
td->oldest = -1;
}
return;
}
input_event(input, EV_ABS, ABS_MT_TRACKING_ID, td->id);
input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x);
input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y);
input_mt_sync(input);
/*
* touchscreen emulation: if there was no touching finger previously,
* emit touch event
*/
if (td->oldest < 0) {
input_event(input, EV_KEY, BTN_TOUCH, 1);
td->oldest = td->id;
}
/*
* touchscreen emulation: if this is the first finger, wait for the
* second; the oldest is then the second if it was the oldest already
* or if there was no first, the first otherwise.
*/
if (td->first) {
td->firstx = td->x;
td->firsty = td->y;
td->firstid = td->id;
} else {
int x, y, oldest;
if (td->id == td->oldest || td->firstid < 0) {
x = td->x;
y = td->y;
oldest = td->id;
} else {
x = td->firstx;
y = td->firsty;
oldest = td->firstid;
}
input_event(input, EV_ABS, ABS_X, x);
input_event(input, EV_ABS, ABS_Y, y);
td->oldest = oldest;
}
}
static int cando_event(struct hid_device *hid, struct hid_field *field,
struct hid_usage *usage, __s32 value)
{
struct cando_data *td = hid_get_drvdata(hid);
if (hid->claimed & HID_CLAIMED_INPUT) {
struct input_dev *input = field->hidinput->input;
switch (usage->hid) {
case HID_DG_INRANGE:
td->valid = value;
break;
case HID_DG_CONTACTID:
td->id = value;
break;
case HID_GD_X:
td->x = value;
break;
case HID_GD_Y:
td->y = value;
cando_filter_event(td, input);
break;
case HID_DG_TIPSWITCH:
/* avoid interference from generic hidinput handling */
break;
default:
/* fallback to the generic hidinput handling */
return 0;
}
}
/* we have handled the hidinput part, now remains hiddev */
if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
hid->hiddev_hid_event(hid, field, usage, value);
return 1;
}
static int cando_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
int ret;
struct cando_data *td;
td = kmalloc(sizeof(struct cando_data), GFP_KERNEL);
if (!td) {
dev_err(&hdev->dev, "cannot allocate Cando Touch data\n");
return -ENOMEM;
}
hid_set_drvdata(hdev, td);
td->first = false;
td->oldest = -1;
td->valid = false;
ret = hid_parse(hdev);
if (!ret)
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (ret)
kfree(td);
return ret;
}
static void cando_remove(struct hid_device *hdev)
{
hid_hw_stop(hdev);
kfree(hid_get_drvdata(hdev));
hid_set_drvdata(hdev, NULL);
}
static const struct hid_device_id cando_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_CANDO,
USB_DEVICE_ID_CANDO_MULTI_TOUCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CANDO,
USB_DEVICE_ID_CANDO_MULTI_TOUCH_11_6) },
{ }
};
MODULE_DEVICE_TABLE(hid, cando_devices);
static const struct hid_usage_id cando_grabbed_usages[] = {
{ HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
{ HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
};
static struct hid_driver cando_driver = {
.name = "cando-touch",
.id_table = cando_devices,
.probe = cando_probe,
.remove = cando_remove,
.input_mapping = cando_input_mapping,
.input_mapped = cando_input_mapped,
.usage_table = cando_grabbed_usages,
.event = cando_event,
};
static int __init cando_init(void)
{
return hid_register_driver(&cando_driver);
}
static void __exit cando_exit(void)
{
hid_unregister_driver(&cando_driver);
}
module_init(cando_init);
module_exit(cando_exit);
...@@ -653,10 +653,9 @@ int hid_parse_report(struct hid_device *device, __u8 *start, ...@@ -653,10 +653,9 @@ int hid_parse_report(struct hid_device *device, __u8 *start,
if (device->driver->report_fixup) if (device->driver->report_fixup)
device->driver->report_fixup(device, start, size); device->driver->report_fixup(device, start, size);
device->rdesc = kmalloc(size, GFP_KERNEL); device->rdesc = kmemdup(start, size, GFP_KERNEL);
if (device->rdesc == NULL) if (device->rdesc == NULL)
return -ENOMEM; return -ENOMEM;
memcpy(device->rdesc, start, size);
device->rsize = size; device->rsize = size;
parser = vmalloc(sizeof(struct hid_parser)); parser = vmalloc(sizeof(struct hid_parser));
...@@ -940,13 +939,8 @@ static void hid_output_field(struct hid_field *field, __u8 *data) ...@@ -940,13 +939,8 @@ static void hid_output_field(struct hid_field *field, __u8 *data)
unsigned count = field->report_count; unsigned count = field->report_count;
unsigned offset = field->report_offset; unsigned offset = field->report_offset;
unsigned size = field->report_size; unsigned size = field->report_size;
unsigned bitsused = offset + count * size;
unsigned n; unsigned n;
/* make sure the unused bits in the last byte are zeros */
if (count > 0 && size > 0 && (bitsused % 8) != 0)
data[(bitsused-1)/8] &= (1 << (bitsused % 8)) - 1;
for (n = 0; n < count; n++) { for (n = 0; n < count; n++) {
if (field->logical_minimum < 0) /* signed values */ if (field->logical_minimum < 0) /* signed values */
implement(data, offset + n * size, size, s32ton(field->value[n], size)); implement(data, offset + n * size, size, s32ton(field->value[n], size));
...@@ -966,6 +960,7 @@ void hid_output_report(struct hid_report *report, __u8 *data) ...@@ -966,6 +960,7 @@ void hid_output_report(struct hid_report *report, __u8 *data)
if (report->id > 0) if (report->id > 0)
*data++ = report->id; *data++ = report->id;
memset(data, 0, ((report->size - 1) >> 3) + 1);
for (n = 0; n < report->maxfield; n++) for (n = 0; n < report->maxfield; n++)
hid_output_field(report->field[n], data); hid_output_field(report->field[n], data);
} }
...@@ -1086,35 +1081,28 @@ int hid_input_report(struct hid_device *hid, int type, u8 *data, int size, int i ...@@ -1086,35 +1081,28 @@ int hid_input_report(struct hid_device *hid, int type, u8 *data, int size, int i
buf = kmalloc(sizeof(char) * HID_DEBUG_BUFSIZE, GFP_ATOMIC); buf = kmalloc(sizeof(char) * HID_DEBUG_BUFSIZE, GFP_ATOMIC);
if (!buf) { if (!buf)
report = hid_get_report(report_enum, data);
goto nomem; goto nomem;
}
snprintf(buf, HID_DEBUG_BUFSIZE - 1,
"\nreport (size %u) (%snumbered)\n", size, report_enum->numbered ? "" : "un");
hid_debug_event(hid, buf);
report = hid_get_report(report_enum, data);
if (!report) {
kfree(buf);
return -1;
}
/* dump the report */ /* dump the report */
snprintf(buf, HID_DEBUG_BUFSIZE - 1, snprintf(buf, HID_DEBUG_BUFSIZE - 1,
"report %d (size %u) = ", report->id, size); "\nreport (size %u) (%snumbered) = ", size, report_enum->numbered ? "" : "un");
hid_debug_event(hid, buf); hid_debug_event(hid, buf);
for (i = 0; i < size; i++) { for (i = 0; i < size; i++) {
snprintf(buf, HID_DEBUG_BUFSIZE - 1, snprintf(buf, HID_DEBUG_BUFSIZE - 1,
" %02x", data[i]); " %02x", data[i]);
hid_debug_event(hid, buf); hid_debug_event(hid, buf);
} }
hid_debug_event(hid, "\n"); hid_debug_event(hid, "\n");
kfree(buf); kfree(buf);
nomem: nomem:
report = hid_get_report(report_enum, data);
if (!report)
return -1;
if (hdrv && hdrv->raw_event && hid_match_report(hid, report)) { if (hdrv && hdrv->raw_event && hid_match_report(hid, report)) {
ret = hdrv->raw_event(hid, report, data, size); ret = hdrv->raw_event(hid, report, data, size);
if (ret != 0) if (ret != 0)
...@@ -1167,6 +1155,8 @@ int hid_connect(struct hid_device *hdev, unsigned int connect_mask) ...@@ -1167,6 +1155,8 @@ int hid_connect(struct hid_device *hdev, unsigned int connect_mask)
unsigned int i; unsigned int i;
int len; int len;
if (hdev->quirks & HID_QUIRK_HIDDEV_FORCE)
connect_mask |= (HID_CONNECT_HIDDEV_FORCE | HID_CONNECT_HIDDEV);
if (hdev->bus != BUS_USB) if (hdev->bus != BUS_USB)
connect_mask &= ~HID_CONNECT_HIDDEV; connect_mask &= ~HID_CONNECT_HIDDEV;
if (hid_hiddev(hdev)) if (hid_hiddev(hdev))
...@@ -1246,6 +1236,7 @@ EXPORT_SYMBOL_GPL(hid_disconnect); ...@@ -1246,6 +1236,7 @@ EXPORT_SYMBOL_GPL(hid_disconnect);
/* a list of devices for which there is a specialized driver on HID bus */ /* a list of devices for which there is a specialized driver on HID bus */
static const struct hid_device_id hid_blacklist[] = { static const struct hid_device_id hid_blacklist[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M1968) }, { HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M1968) },
{ HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M2256) },
{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) }, { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) },
{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) }, { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ATV_IRCONTROL) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ATV_IRCONTROL) },
...@@ -1290,14 +1281,19 @@ static const struct hid_device_id hid_blacklist[] = { ...@@ -1290,14 +1281,19 @@ static const struct hid_device_id hid_blacklist[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) }, { HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) },
{ HID_USB_DEVICE(USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_EMPREX_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH_11_6) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION_SOLAR) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION_SOLAR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_PRODIKEYS_PCMIDI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_2) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_3) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_3) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_MOUSE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006) }, { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) }, { HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) }, { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR) }, { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR) },
...@@ -1331,6 +1327,8 @@ static const struct hid_device_id hid_blacklist[] = { ...@@ -1331,6 +1327,8 @@ static const struct hid_device_id hid_blacklist[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACENAVIGATOR) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACENAVIGATOR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD_BOOTLOADER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_LK6K) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_LK6K) },
...@@ -1342,7 +1340,9 @@ static const struct hid_device_id hid_blacklist[] = { ...@@ -1342,7 +1340,9 @@ static const struct hid_device_id hid_blacklist[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) }, { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KONE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) },
...@@ -1359,8 +1359,10 @@ static const struct hid_device_id hid_blacklist[] = { ...@@ -1359,8 +1359,10 @@ static const struct hid_device_id hid_blacklist[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_TWINHAN, USB_DEVICE_ID_TWINHAN_IR_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_TWINHAN, USB_DEVICE_ID_TWINHAN_IR_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) }, { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) }, { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ZYDACRON, USB_DEVICE_ID_ZYDACRON_REMOTE_CONTROL) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_BT) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_BT) },
{ } { }
...@@ -1757,7 +1759,7 @@ int hid_add_device(struct hid_device *hdev) ...@@ -1757,7 +1759,7 @@ int hid_add_device(struct hid_device *hdev)
/* we need to kill them here, otherwise they will stay allocated to /* we need to kill them here, otherwise they will stay allocated to
* wait for coming driver */ * wait for coming driver */
if (hid_ignore(hdev)) if (!(hdev->quirks & HID_QUIRK_NO_IGNORE) && hid_ignore(hdev))
return -ENODEV; return -ENODEV;
/* XXX hack, any other cleaner solution after the driver core /* XXX hack, any other cleaner solution after the driver core
...@@ -1765,11 +1767,12 @@ int hid_add_device(struct hid_device *hdev) ...@@ -1765,11 +1767,12 @@ int hid_add_device(struct hid_device *hdev)
dev_set_name(&hdev->dev, "%04X:%04X:%04X.%04X", hdev->bus, dev_set_name(&hdev->dev, "%04X:%04X:%04X.%04X", hdev->bus,
hdev->vendor, hdev->product, atomic_inc_return(&id)); hdev->vendor, hdev->product, atomic_inc_return(&id));
hid_debug_register(hdev, dev_name(&hdev->dev));
ret = device_add(&hdev->dev); ret = device_add(&hdev->dev);
if (!ret) if (!ret)
hdev->status |= HID_STAT_ADDED; hdev->status |= HID_STAT_ADDED;
else
hid_debug_register(hdev, dev_name(&hdev->dev)); hid_debug_unregister(hdev);
return ret; return ret;
} }
......
/*
* HID driver for eGalax dual-touch panels
*
* Copyright (c) 2010 Stephane Chatty <chatty@enac.fr>
*
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*/
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/slab.h>
#include "usbhid/usbhid.h"
MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
MODULE_DESCRIPTION("eGalax dual-touch panel");
MODULE_LICENSE("GPL");
#include "hid-ids.h"
struct egalax_data {
__u16 x, y, z;
__u8 id;
bool first; /* is this the first finger in the frame? */
bool valid; /* valid finger data, or just placeholder? */
bool activity; /* at least one active finger previously? */
__u16 lastx, lasty; /* latest valid (x, y) in the frame */
};
static int egalax_input_mapping(struct hid_device *hdev, struct hid_input *hi,
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
{
switch (usage->hid & HID_USAGE_PAGE) {
case HID_UP_GENDESK:
switch (usage->hid) {
case HID_GD_X:
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_POSITION_X);
/* touchscreen emulation */
input_set_abs_params(hi->input, ABS_X,
field->logical_minimum,
field->logical_maximum, 0, 0);
return 1;
case HID_GD_Y:
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_POSITION_Y);
/* touchscreen emulation */
input_set_abs_params(hi->input, ABS_Y,
field->logical_minimum,
field->logical_maximum, 0, 0);
return 1;
}
return 0;
case HID_UP_DIGITIZER:
switch (usage->hid) {
case HID_DG_TIPSWITCH:
/* touchscreen emulation */
hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
return 1;
case HID_DG_INRANGE:
case HID_DG_CONFIDENCE:
case HID_DG_CONTACTCOUNT:
case HID_DG_CONTACTMAX:
return -1;
case HID_DG_CONTACTID:
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_TRACKING_ID);
return 1;
case HID_DG_TIPPRESSURE:
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_PRESSURE);
return 1;
}
return 0;
}
/* ignore others (from other reports we won't get anyway) */
return -1;
}
static int egalax_input_mapped(struct hid_device *hdev, struct hid_input *hi,
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
{
if (usage->type == EV_KEY || usage->type == EV_ABS)
clear_bit(usage->code, *bit);
return 0;
}
/*
* this function is called when a whole finger has been parsed,
* so that it can decide what to send to the input layer.
*/
static void egalax_filter_event(struct egalax_data *td, struct input_dev *input)
{
td->first = !td->first; /* touchscreen emulation */
if (td->valid) {
/* emit multitouch events */
input_event(input, EV_ABS, ABS_MT_TRACKING_ID, td->id);
input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x);
input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y);
input_event(input, EV_ABS, ABS_MT_PRESSURE, td->z);
input_mt_sync(input);
/*
* touchscreen emulation: store (x, y) as
* the last valid values in this frame
*/
td->lastx = td->x;
td->lasty = td->y;
}
/*
* touchscreen emulation: if this is the second finger and at least
* one in this frame is valid, the latest valid in the frame is
* the oldest on the panel, the one we want for single touch
*/
if (!td->first && td->activity) {
input_event(input, EV_ABS, ABS_X, td->lastx);
input_event(input, EV_ABS, ABS_Y, td->lasty);
}
if (!td->valid) {
/*
* touchscreen emulation: if the first finger is invalid
* and there previously was finger activity, this is a release
*/
if (td->first && td->activity) {
input_event(input, EV_KEY, BTN_TOUCH, 0);
td->activity = false;
}
return;
}
/* touchscreen emulation: if no previous activity, emit touch event */
if (!td->activity) {
input_event(input, EV_KEY, BTN_TOUCH, 1);
td->activity = true;
}
}
static int egalax_event(struct hid_device *hid, struct hid_field *field,
struct hid_usage *usage, __s32 value)
{
struct egalax_data *td = hid_get_drvdata(hid);
if (hid->claimed & HID_CLAIMED_INPUT) {
struct input_dev *input = field->hidinput->input;
switch (usage->hid) {
case HID_DG_INRANGE:
case HID_DG_CONFIDENCE:
/* avoid interference from generic hidinput handling */
break;
case HID_DG_TIPSWITCH:
td->valid = value;
break;
case HID_DG_TIPPRESSURE:
td->z = value;
break;
case HID_DG_CONTACTID:
td->id = value;
break;
case HID_GD_X:
td->x = value;
break;
case HID_GD_Y:
td->y = value;
/* this is the last field in a finger */
egalax_filter_event(td, input);
break;
case HID_DG_CONTACTCOUNT:
/* touch emulation: this is the last field in a frame */
td->first = false;
break;
default:
/* fallback to the generic hidinput handling */
return 0;
}
}
/* we have handled the hidinput part, now remains hiddev */
if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
hid->hiddev_hid_event(hid, field, usage, value);
return 1;
}
static int egalax_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
int ret;
struct egalax_data *td;
struct hid_report *report;
td = kmalloc(sizeof(struct egalax_data), GFP_KERNEL);
if (!td) {
dev_err(&hdev->dev, "cannot allocate eGalax data\n");
return -ENOMEM;
}
hid_set_drvdata(hdev, td);
ret = hid_parse(hdev);
if (ret)
goto end;
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (ret)
goto end;
report = hdev->report_enum[HID_FEATURE_REPORT].report_id_hash[5];
if (report) {
report->field[0]->value[0] = 2;
usbhid_submit_report(hdev, report, USB_DIR_OUT);
}
end:
if (ret)
kfree(td);
return ret;
}
static void egalax_remove(struct hid_device *hdev)
{
hid_hw_stop(hdev);
kfree(hid_get_drvdata(hdev));
hid_set_drvdata(hdev, NULL);
}
static const struct hid_device_id egalax_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH) },
{ }
};
MODULE_DEVICE_TABLE(hid, egalax_devices);
static const struct hid_usage_id egalax_grabbed_usages[] = {
{ HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
{ HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
};
static struct hid_driver egalax_driver = {
.name = "egalax-touch",
.id_table = egalax_devices,
.probe = egalax_probe,
.remove = egalax_remove,
.input_mapping = egalax_input_mapping,
.input_mapped = egalax_input_mapped,
.usage_table = egalax_grabbed_usages,
.event = egalax_event,
};
static int __init egalax_init(void)
{
return hid_register_driver(&egalax_driver);
}
static void __exit egalax_exit(void)
{
hid_unregister_driver(&egalax_driver);
}
module_init(egalax_init);
module_exit(egalax_exit);
...@@ -20,6 +20,7 @@ ...@@ -20,6 +20,7 @@
#define USB_VENDOR_ID_3M 0x0596 #define USB_VENDOR_ID_3M 0x0596
#define USB_DEVICE_ID_3M1968 0x0500 #define USB_DEVICE_ID_3M1968 0x0500
#define USB_DEVICE_ID_3M2256 0x0502
#define USB_VENDOR_ID_A4TECH 0x09da #define USB_VENDOR_ID_A4TECH 0x09da
#define USB_DEVICE_ID_A4TECH_WCP32PU 0x0006 #define USB_DEVICE_ID_A4TECH_WCP32PU 0x0006
...@@ -123,6 +124,13 @@ ...@@ -123,6 +124,13 @@
#define USB_VENDOR_ID_BERKSHIRE 0x0c98 #define USB_VENDOR_ID_BERKSHIRE 0x0c98
#define USB_DEVICE_ID_BERKSHIRE_PCWD 0x1140 #define USB_DEVICE_ID_BERKSHIRE_PCWD 0x1140
#define USB_VENDOR_ID_BTC 0x046e
#define USB_DEVICE_ID_BTC_EMPREX_REMOTE 0x5578
#define USB_VENDOR_ID_CANDO 0x2087
#define USB_DEVICE_ID_CANDO_MULTI_TOUCH 0x0a01
#define USB_DEVICE_ID_CANDO_MULTI_TOUCH_11_6 0x0b03
#define USB_VENDOR_ID_CH 0x068e #define USB_VENDOR_ID_CH 0x068e
#define USB_DEVICE_ID_CH_PRO_PEDALS 0x00f2 #define USB_DEVICE_ID_CH_PRO_PEDALS 0x00f2
#define USB_DEVICE_ID_CH_COMBATSTICK 0x00f4 #define USB_DEVICE_ID_CH_COMBATSTICK 0x00f4
...@@ -148,6 +156,9 @@ ...@@ -148,6 +156,9 @@
#define USB_DEVICE_ID_CODEMERCS_IOW_FIRST 0x1500 #define USB_DEVICE_ID_CODEMERCS_IOW_FIRST 0x1500
#define USB_DEVICE_ID_CODEMERCS_IOW_LAST 0x15ff #define USB_DEVICE_ID_CODEMERCS_IOW_LAST 0x15ff
#define USB_VENDOR_ID_CREATIVELABS 0x041e
#define USB_DEVICE_ID_PRODIKEYS_PCMIDI 0x2801
#define USB_VENDOR_ID_CYGNAL 0x10c4 #define USB_VENDOR_ID_CYGNAL 0x10c4
#define USB_DEVICE_ID_CYGNAL_RADIO_SI470X 0x818a #define USB_DEVICE_ID_CYGNAL_RADIO_SI470X 0x818a
...@@ -171,6 +182,10 @@ ...@@ -171,6 +182,10 @@
#define USB_VENDOR_ID_DRAGONRISE 0x0079 #define USB_VENDOR_ID_DRAGONRISE 0x0079
#define USB_VENDOR_ID_DWAV 0x0eef
#define USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER 0x0001
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH 0x480d
#define USB_VENDOR_ID_ELO 0x04E7 #define USB_VENDOR_ID_ELO 0x04E7
#define USB_DEVICE_ID_ELO_TS2700 0x0020 #define USB_DEVICE_ID_ELO_TS2700 0x0020
...@@ -342,6 +357,8 @@ ...@@ -342,6 +357,8 @@
#define USB_VENDOR_ID_MICROCHIP 0x04d8 #define USB_VENDOR_ID_MICROCHIP 0x04d8
#define USB_DEVICE_ID_PICKIT1 0x0032 #define USB_DEVICE_ID_PICKIT1 0x0032
#define USB_DEVICE_ID_PICKIT2 0x0033 #define USB_DEVICE_ID_PICKIT2 0x0033
#define USB_DEVICE_ID_PICOLCD 0xc002
#define USB_DEVICE_ID_PICOLCD_BOOTLOADER 0xf002
#define USB_VENDOR_ID_MICROSOFT 0x045e #define USB_VENDOR_ID_MICROSOFT 0x045e
#define USB_DEVICE_ID_SIDEWINDER_GV 0x003b #define USB_DEVICE_ID_SIDEWINDER_GV 0x003b
...@@ -400,6 +417,9 @@ ...@@ -400,6 +417,9 @@
#define USB_VENDOR_ID_PRODIGE 0x05af #define USB_VENDOR_ID_PRODIGE 0x05af
#define USB_DEVICE_ID_PRODIGE_CORDLESS 0x3062 #define USB_DEVICE_ID_PRODIGE_CORDLESS 0x3062
#define USB_VENDOR_ID_ROCCAT 0x1e7d
#define USB_DEVICE_ID_ROCCAT_KONE 0x2ced
#define USB_VENDOR_ID_SAITEK 0x06a3 #define USB_VENDOR_ID_SAITEK 0x06a3
#define USB_DEVICE_ID_SAITEK_RUMBLEPAD 0xff17 #define USB_DEVICE_ID_SAITEK_RUMBLEPAD 0xff17
...@@ -409,6 +429,7 @@ ...@@ -409,6 +429,7 @@
#define USB_VENDOR_ID_SAMSUNG 0x0419 #define USB_VENDOR_ID_SAMSUNG 0x0419
#define USB_DEVICE_ID_SAMSUNG_IR_REMOTE 0x0001 #define USB_DEVICE_ID_SAMSUNG_IR_REMOTE 0x0001
#define USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE 0x0600
#define USB_VENDOR_ID_SONY 0x054c #define USB_VENDOR_ID_SONY 0x054c
#define USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE 0x024b #define USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE 0x024b
...@@ -457,6 +478,7 @@ ...@@ -457,6 +478,7 @@
#define USB_VENDOR_ID_WACOM 0x056a #define USB_VENDOR_ID_WACOM 0x056a
#define USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH 0x81 #define USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH 0x81
#define USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH 0xbd
#define USB_VENDOR_ID_WISEGROUP 0x0925 #define USB_VENDOR_ID_WISEGROUP 0x0925
#define USB_DEVICE_ID_SMARTJOY_PLUS 0x0005 #define USB_DEVICE_ID_SMARTJOY_PLUS 0x0005
...@@ -475,6 +497,9 @@ ...@@ -475,6 +497,9 @@
#define USB_VENDOR_ID_ZEROPLUS 0x0c12 #define USB_VENDOR_ID_ZEROPLUS 0x0c12
#define USB_VENDOR_ID_ZYDACRON 0x13EC
#define USB_DEVICE_ID_ZYDACRON_REMOTE_CONTROL 0x0006
#define USB_VENDOR_ID_KYE 0x0458 #define USB_VENDOR_ID_KYE 0x0458
#define USB_DEVICE_ID_KYE_ERGO_525V 0x0087 #define USB_DEVICE_ID_KYE_ERGO_525V 0x0087
#define USB_DEVICE_ID_KYE_GPEN_560 0x5003 #define USB_DEVICE_ID_KYE_GPEN_560 0x5003
......
...@@ -126,6 +126,9 @@ static int lg_wireless_mapping(struct hid_input *hi, struct hid_usage *usage, ...@@ -126,6 +126,9 @@ static int lg_wireless_mapping(struct hid_input *hi, struct hid_usage *usage,
case 0x1004: lg_map_key_clear(KEY_VIDEO); break; case 0x1004: lg_map_key_clear(KEY_VIDEO); break;
case 0x1005: lg_map_key_clear(KEY_AUDIO); break; case 0x1005: lg_map_key_clear(KEY_AUDIO); break;
case 0x100a: lg_map_key_clear(KEY_DOCUMENTS); break; case 0x100a: lg_map_key_clear(KEY_DOCUMENTS); break;
/* The following two entries are Playlist 1 and 2 on the MX3200 */
case 0x100f: lg_map_key_clear(KEY_FN_1); break;
case 0x1010: lg_map_key_clear(KEY_FN_2); break;
case 0x1011: lg_map_key_clear(KEY_PREVIOUSSONG); break; case 0x1011: lg_map_key_clear(KEY_PREVIOUSSONG); break;
case 0x1012: lg_map_key_clear(KEY_NEXTSONG); break; case 0x1012: lg_map_key_clear(KEY_NEXTSONG); break;
case 0x1013: lg_map_key_clear(KEY_CAMERA); break; case 0x1013: lg_map_key_clear(KEY_CAMERA); break;
...@@ -137,6 +140,7 @@ static int lg_wireless_mapping(struct hid_input *hi, struct hid_usage *usage, ...@@ -137,6 +140,7 @@ static int lg_wireless_mapping(struct hid_input *hi, struct hid_usage *usage,
case 0x1019: lg_map_key_clear(KEY_PROG1); break; case 0x1019: lg_map_key_clear(KEY_PROG1); break;
case 0x101a: lg_map_key_clear(KEY_PROG2); break; case 0x101a: lg_map_key_clear(KEY_PROG2); break;
case 0x101b: lg_map_key_clear(KEY_PROG3); break; case 0x101b: lg_map_key_clear(KEY_PROG3); break;
case 0x101c: lg_map_key_clear(KEY_CYCLEWINDOWS); break;
case 0x101f: lg_map_key_clear(KEY_ZOOMIN); break; case 0x101f: lg_map_key_clear(KEY_ZOOMIN); break;
case 0x1020: lg_map_key_clear(KEY_ZOOMOUT); break; case 0x1020: lg_map_key_clear(KEY_ZOOMOUT); break;
case 0x1021: lg_map_key_clear(KEY_ZOOMRESET); break; case 0x1021: lg_map_key_clear(KEY_ZOOMRESET); break;
...@@ -147,6 +151,11 @@ static int lg_wireless_mapping(struct hid_input *hi, struct hid_usage *usage, ...@@ -147,6 +151,11 @@ static int lg_wireless_mapping(struct hid_input *hi, struct hid_usage *usage,
case 0x1029: lg_map_key_clear(KEY_SHUFFLE); break; case 0x1029: lg_map_key_clear(KEY_SHUFFLE); break;
case 0x102a: lg_map_key_clear(KEY_BACK); break; case 0x102a: lg_map_key_clear(KEY_BACK); break;
case 0x102b: lg_map_key_clear(KEY_CYCLEWINDOWS); break; case 0x102b: lg_map_key_clear(KEY_CYCLEWINDOWS); break;
case 0x102d: lg_map_key_clear(KEY_WWW); break;
/* The following two are 'Start/answer call' and 'End/reject call'
on the MX3200 */
case 0x1031: lg_map_key_clear(KEY_OK); break;
case 0x1032: lg_map_key_clear(KEY_CANCEL); break;
case 0x1041: lg_map_key_clear(KEY_BATTERY); break; case 0x1041: lg_map_key_clear(KEY_BATTERY); break;
case 0x1042: lg_map_key_clear(KEY_WORDPROCESSOR); break; case 0x1042: lg_map_key_clear(KEY_WORDPROCESSOR); break;
case 0x1043: lg_map_key_clear(KEY_SPREADSHEET); break; case 0x1043: lg_map_key_clear(KEY_SPREADSHEET); break;
......
...@@ -354,12 +354,15 @@ static int magicmouse_probe(struct hid_device *hdev, ...@@ -354,12 +354,15 @@ static int magicmouse_probe(struct hid_device *hdev,
goto err_free; goto err_free;
} }
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_HIDINPUT); ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (ret) { if (ret) {
dev_err(&hdev->dev, "magicmouse hw start failed\n"); dev_err(&hdev->dev, "magicmouse hw start failed\n");
goto err_free; goto err_free;
} }
/* we are handling the input ourselves */
hidinput_disconnect(hdev);
report = hid_register_report(hdev, HID_INPUT_REPORT, TOUCH_REPORT_ID); report = hid_register_report(hdev, HID_INPUT_REPORT, TOUCH_REPORT_ID);
if (!report) { if (!report) {
dev_err(&hdev->dev, "unable to register touch report\n"); dev_err(&hdev->dev, "unable to register touch report\n");
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
#ifndef __HID_ROCCAT_KONE_H
#define __HID_ROCCAT_KONE_H
/*
* Copyright (c) 2010 Stefan Achatz <erazor_de@users.sourceforge.net>
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*/
#include <linux/types.h>
#define ROCCAT_KONE_DRIVER_VERSION "v0.3.1"
#pragma pack(push)
#pragma pack(1)
struct kone_keystroke {
uint8_t key;
uint8_t action;
uint16_t period; /* in milliseconds */
};
enum kone_keystroke_buttons {
kone_keystroke_button_1 = 0xf0, /* left mouse button */
kone_keystroke_button_2 = 0xf1, /* right mouse button */
kone_keystroke_button_3 = 0xf2, /* wheel */
kone_keystroke_button_9 = 0xf3, /* side button up */
kone_keystroke_button_8 = 0xf4 /* side button down */
};
enum kone_keystroke_actions {
kone_keystroke_action_press = 0,
kone_keystroke_action_release = 1
};
struct kone_button_info {
uint8_t number; /* range 1-8 */
uint8_t type;
uint8_t macro_type; /* 0 = short, 1 = overlong */
uint8_t macro_set_name[16]; /* can be max 15 chars long */
uint8_t macro_name[16]; /* can be max 15 chars long */
uint8_t count;
struct kone_keystroke keystrokes[20];
};
enum kone_button_info_types {
/* valid button types until firmware 1.32 */
kone_button_info_type_button_1 = 0x1, /* click (left mouse button) */
kone_button_info_type_button_2 = 0x2, /* menu (right mouse button)*/
kone_button_info_type_button_3 = 0x3, /* scroll (wheel) */
kone_button_info_type_double_click = 0x4,
kone_button_info_type_key = 0x5,
kone_button_info_type_macro = 0x6,
kone_button_info_type_off = 0x7,
/* TODO clarify function and rename */
kone_button_info_type_osd_xy_prescaling = 0x8,
kone_button_info_type_osd_dpi = 0x9,
kone_button_info_type_osd_profile = 0xa,
kone_button_info_type_button_9 = 0xb, /* ie forward */
kone_button_info_type_button_8 = 0xc, /* ie backward */
kone_button_info_type_dpi_up = 0xd, /* internal */
kone_button_info_type_dpi_down = 0xe, /* internal */
kone_button_info_type_button_7 = 0xf, /* tilt left */
kone_button_info_type_button_6 = 0x10, /* tilt right */
kone_button_info_type_profile_up = 0x11, /* internal */
kone_button_info_type_profile_down = 0x12, /* internal */
/* additional valid button types since firmware 1.38 */
kone_button_info_type_multimedia_open_player = 0x20,
kone_button_info_type_multimedia_next_track = 0x21,
kone_button_info_type_multimedia_prev_track = 0x22,
kone_button_info_type_multimedia_play_pause = 0x23,
kone_button_info_type_multimedia_stop = 0x24,
kone_button_info_type_multimedia_mute = 0x25,
kone_button_info_type_multimedia_volume_up = 0x26,
kone_button_info_type_multimedia_volume_down = 0x27
};
enum kone_button_info_numbers {
kone_button_top = 1,
kone_button_wheel_tilt_left = 2,
kone_button_wheel_tilt_right = 3,
kone_button_forward = 4,
kone_button_backward = 5,
kone_button_middle = 6,
kone_button_plus = 7,
kone_button_minus = 8,
};
struct kone_light_info {
uint8_t number; /* number of light 1-5 */
uint8_t mod; /* 1 = on, 2 = off */
uint8_t red; /* range 0x00-0xff */
uint8_t green; /* range 0x00-0xff */
uint8_t blue; /* range 0x00-0xff */
};
struct kone_profile {
uint16_t size; /* always 975 */
uint16_t unused; /* always 0 */
/*
* range 1-5
* This number does not need to correspond with location where profile
* saved
*/
uint8_t profile; /* range 1-5 */
uint16_t main_sensitivity; /* range 100-1000 */
uint8_t xy_sensitivity_enabled; /* 1 = on, 2 = off */
uint16_t x_sensitivity; /* range 100-1000 */
uint16_t y_sensitivity; /* range 100-1000 */
uint8_t dpi_rate; /* bit 1 = 800, ... */
uint8_t startup_dpi; /* range 1-6 */
uint8_t polling_rate; /* 1 = 125Hz, 2 = 500Hz, 3 = 1000Hz */
/* kone has no dcu
* value is always 2 in firmwares <= 1.32 and
* 1 in firmwares > 1.32
*/
uint8_t dcu_flag;
uint8_t light_effect_1; /* range 1-3 */
uint8_t light_effect_2; /* range 1-5 */
uint8_t light_effect_3; /* range 1-4 */
uint8_t light_effect_speed; /* range 0-255 */
struct kone_light_info light_infos[5];
/* offset is kone_button_info_numbers - 1 */
struct kone_button_info button_infos[8];
uint16_t checksum; /* \brief holds checksum of struct */
};
enum kone_polling_rates {
kone_polling_rate_125 = 1,
kone_polling_rate_500 = 2,
kone_polling_rate_1000 = 3
};
struct kone_settings {
uint16_t size; /* always 36 */
uint8_t startup_profile; /* 1-5 */
uint8_t unknown1;
uint8_t tcu; /* 0 = off, 1 = on */
uint8_t unknown2[23];
uint8_t calibration_data[4];
uint8_t unknown3[2];
uint16_t checksum;
};
/*
* 12 byte mouse event read by interrupt_read
*/
struct kone_mouse_event {
uint8_t report_number; /* always 1 */
uint8_t button;
uint16_t x;
uint16_t y;
uint8_t wheel; /* up = 1, down = -1 */
uint8_t tilt; /* right = 1, left = -1 */
uint8_t unknown;
uint8_t event;
uint8_t value; /* press = 0, release = 1 */
uint8_t macro_key; /* 0 to 8 */
};
enum kone_mouse_events {
/* osd events are thought to be display on screen */
kone_mouse_event_osd_dpi = 0xa0,
kone_mouse_event_osd_profile = 0xb0,
/* TODO clarify meaning and occurence of kone_mouse_event_calibration */
kone_mouse_event_calibration = 0xc0,
kone_mouse_event_call_overlong_macro = 0xe0,
/* switch events notify if user changed values with mousebutton click */
kone_mouse_event_switch_dpi = 0xf0,
kone_mouse_event_switch_profile = 0xf1
};
enum kone_commands {
kone_command_profile = 0x5a,
kone_command_settings = 0x15a,
kone_command_firmware_version = 0x25a,
kone_command_weight = 0x45a,
kone_command_calibrate = 0x55a,
kone_command_confirm_write = 0x65a,
kone_command_firmware = 0xe5a
};
#pragma pack(pop)
struct kone_device {
/*
* Storing actual values when we get informed about changes since there
* is no way of getting this information from the device on demand
*/
int actual_profile, actual_dpi;
/* Used for neutralizing abnormal button behaviour */
struct kone_mouse_event last_mouse_event;
/*
* It's unlikely that multiple sysfs attributes are accessed at a time,
* so only one mutex is used to secure hardware access and profiles and
* settings of this struct.
*/
struct mutex kone_lock;
/*
* Storing the data here reduces IO and ensures that data is available
* when its needed (E.g. interrupt handler).
*/
struct kone_profile profiles[5];
struct kone_settings settings;
/*
* firmware doesn't change unless firmware update is implemented,
* so it's read only once
*/
int firmware_version;
};
#endif
This diff is collapsed.
...@@ -3,6 +3,9 @@ ...@@ -3,6 +3,9 @@
* *
* Copyright (c) 2008 Lev Babiev * Copyright (c) 2008 Lev Babiev
* based on hid-cherry driver * based on hid-cherry driver
*
* Modified to also support BTC "Emprex 3009URF III Vista MCE Remote" by
* Wayne Thomas 2010.
*/ */
/* /*
...@@ -24,23 +27,29 @@ static int ts_input_mapping(struct hid_device *hdev, struct hid_input *hi, ...@@ -24,23 +27,29 @@ static int ts_input_mapping(struct hid_device *hdev, struct hid_input *hi,
struct hid_field *field, struct hid_usage *usage, struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max) unsigned long **bit, int *max)
{ {
if ((usage->hid & HID_USAGE_PAGE) != 0x0ffbc0000) if ((usage->hid & HID_USAGE_PAGE) != HID_UP_LOGIVENDOR)
return 0; return 0;
switch (usage->hid & HID_USAGE) { switch (usage->hid & HID_USAGE) {
case 0x00d: ts_map_key_clear(KEY_HOME); break; case 0x00d: ts_map_key_clear(KEY_MEDIA); break;
case 0x024: ts_map_key_clear(KEY_MENU); break; case 0x024: ts_map_key_clear(KEY_MENU); break;
case 0x025: ts_map_key_clear(KEY_TV); break; case 0x025: ts_map_key_clear(KEY_TV); break;
case 0x048: ts_map_key_clear(KEY_RED); break; case 0x031: ts_map_key_clear(KEY_AUDIO); break;
case 0x047: ts_map_key_clear(KEY_GREEN); break; case 0x032: ts_map_key_clear(KEY_TEXT); break;
case 0x049: ts_map_key_clear(KEY_YELLOW); break; case 0x033: ts_map_key_clear(KEY_CHANNEL); break;
case 0x04a: ts_map_key_clear(KEY_BLUE); break; case 0x047: ts_map_key_clear(KEY_MP3); break;
case 0x04b: ts_map_key_clear(KEY_ANGLE); break; case 0x048: ts_map_key_clear(KEY_TV2); break;
case 0x04c: ts_map_key_clear(KEY_LANGUAGE); break; case 0x049: ts_map_key_clear(KEY_CAMERA); break;
case 0x04d: ts_map_key_clear(KEY_SUBTITLE); break; case 0x04a: ts_map_key_clear(KEY_VIDEO); break;
case 0x031: ts_map_key_clear(KEY_AUDIO); break; case 0x04b: ts_map_key_clear(KEY_ANGLE); break;
case 0x032: ts_map_key_clear(KEY_TEXT); break; case 0x04c: ts_map_key_clear(KEY_LANGUAGE); break;
case 0x033: ts_map_key_clear(KEY_CHANNEL); break; case 0x04d: ts_map_key_clear(KEY_SUBTITLE); break;
case 0x050: ts_map_key_clear(KEY_RADIO); break;
case 0x05a: ts_map_key_clear(KEY_TEXT); break;
case 0x05b: ts_map_key_clear(KEY_RED); break;
case 0x05c: ts_map_key_clear(KEY_GREEN); break;
case 0x05d: ts_map_key_clear(KEY_YELLOW); break;
case 0x05e: ts_map_key_clear(KEY_BLUE); break;
default: default:
return 0; return 0;
} }
...@@ -50,6 +59,7 @@ static int ts_input_mapping(struct hid_device *hdev, struct hid_input *hi, ...@@ -50,6 +59,7 @@ static int ts_input_mapping(struct hid_device *hdev, struct hid_input *hi,
static const struct hid_device_id ts_devices[] = { static const struct hid_device_id ts_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) }, { HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) },
{ HID_USB_DEVICE(USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_EMPREX_REMOTE) },
{ } { }
}; };
MODULE_DEVICE_TABLE(hid, ts_devices); MODULE_DEVICE_TABLE(hid, ts_devices);
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
...@@ -33,6 +33,7 @@ static const struct hid_blacklist { ...@@ -33,6 +33,7 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_AASHIMA, USB_DEVICE_ID_AASHIMA_PREDATOR, HID_QUIRK_BADPAD }, { USB_VENDOR_ID_AASHIMA, USB_DEVICE_ID_AASHIMA_PREDATOR, HID_QUIRK_BADPAD },
{ USB_VENDOR_ID_ALPS, USB_DEVICE_ID_IBM_GAMEPAD, HID_QUIRK_BADPAD }, { USB_VENDOR_ID_ALPS, USB_DEVICE_ID_IBM_GAMEPAD, HID_QUIRK_BADPAD },
{ USB_VENDOR_ID_CHIC, USB_DEVICE_ID_CHIC_GAMEPAD, HID_QUIRK_BADPAD }, { USB_VENDOR_ID_CHIC, USB_DEVICE_ID_CHIC_GAMEPAD, HID_QUIRK_BADPAD },
{ USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_DRIVING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_DRIVING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FLYING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FLYING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FIGHTING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FIGHTING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
......
...@@ -267,6 +267,7 @@ static int hiddev_open(struct inode *inode, struct file *file) ...@@ -267,6 +267,7 @@ static int hiddev_open(struct inode *inode, struct file *file)
struct hiddev_list *list; struct hiddev_list *list;
int res, i; int res, i;
/* See comment in hiddev_connect() for BKL explanation */
lock_kernel(); lock_kernel();
i = iminor(inode) - HIDDEV_MINOR_BASE; i = iminor(inode) - HIDDEV_MINOR_BASE;
...@@ -894,8 +895,22 @@ int hiddev_connect(struct hid_device *hid, unsigned int force) ...@@ -894,8 +895,22 @@ int hiddev_connect(struct hid_device *hid, unsigned int force)
hiddev->hid = hid; hiddev->hid = hid;
hiddev->exist = 1; hiddev->exist = 1;
/* when lock_kernel() usage is fixed in usb_open(), /*
* we could also fix it here */ * BKL here is used to avoid race after usb_register_dev().
* Once the device node has been created, open() could happen on it.
* The code below will then fail, as hiddev_table hasn't been
* updated.
*
* The obvious fix -- introducing mutex to guard hiddev_table[]
* doesn't work, as usb_open() and usb_register_dev() both take
* minor_rwsem, thus we'll have ABBA deadlock.
*
* Before BKL pushdown, usb_open() had been acquiring it in right
* order, so _open() was safe to use it to protect from this race.
* Now the order is different, but AB-BA deadlock still doesn't occur
* as BKL is dropped on schedule() (i.e. while sleeping on
* minor_rwsem). Fugly.
*/
lock_kernel(); lock_kernel();
retval = usb_register_dev(usbhid->intf, &hiddev_class); retval = usb_register_dev(usbhid->intf, &hiddev_class);
if (retval) { if (retval) {
......
...@@ -311,6 +311,7 @@ static int usb_kbd_probe(struct usb_interface *iface, ...@@ -311,6 +311,7 @@ static int usb_kbd_probe(struct usb_interface *iface,
goto fail2; goto fail2;
usb_set_intfdata(iface, kbd); usb_set_intfdata(iface, kbd);
device_set_wakeup_enable(&dev->dev, 1);
return 0; return 0;
fail2: fail2:
......
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment