bna: Brocade 10Gb Ethernet device driver

This is patch 1/6 which contains linux driver source for
Brocade's BR1010/BR1020 10Gb CEE capable ethernet adapter.
Signed-off-by: Debashis Dutt <ddutt@brocade.com>
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS

@@ -1387,6 +1387,13 @@ L:	linux-scsi@vger.kernel.org
 S:	Supported
 F:	drivers/scsi/bfa/
 
+BROCADE BNA 10 GIGABIT ETHERNET DRIVER
+M:	Rasesh Mody <rmody@brocade.com>
+M:	Debashis Dutt <ddutt@brocade.com>
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	drivers/net/bna/
+
 BSG (block layer generic sg v4 driver)
 M:	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
 L:	linux-scsi@vger.kernel.org

drivers/net/Kconfig

@@ -2869,6 +2869,20 @@ config QLGE
 	  To compile this driver as a module, choose M here: the module
 	  will be called qlge.
 
+config BNA
+        tristate "Brocade 1010/1020 10Gb Ethernet Driver support"
+        depends on PCI
+        ---help---
+          This driver supports Brocade 1010/1020 10Gb CEE capable Ethernet
+          cards.
+          To compile this driver as a module, choose M here: the module
+          will be called bna.
+
+          For general information and support, go to the Brocade support
+          website at:
+
+          <http://support.brocade.com>
+
 source "drivers/net/sfc/Kconfig"
 
 source "drivers/net/benet/Kconfig"

drivers/net/Makefile

@@ -34,6 +34,7 @@ obj-$(CONFIG_ENIC) += enic/
 obj-$(CONFIG_JME) += jme.o
 obj-$(CONFIG_BE2NET) += benet/
 obj-$(CONFIG_VMXNET3) += vmxnet3/
+obj-$(CONFIG_BNA) += bna/
 
 gianfar_driver-objs := gianfar.o \
 		gianfar_ethtool.o \

drivers/net/bna/Makefile

+#
+# Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+# All rights reserved.
+#
+
+obj-$(CONFIG_BNA) += bna.o
+
+bna-objs := bnad.o bnad_ethtool.o bna_ctrl.o bna_txrx.o
+bna-objs += bfa_ioc.o bfa_ioc_ct.o bfa_cee.o cna_fwimg.o
+
+EXTRA_CFLAGS := -Idrivers/net/bna

drivers/net/bna/bfa_cee.h

+/*
+ * Linux network driver for Brocade Converged Network Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+/*
+ * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ */
+
+#ifndef __BFA_CEE_H__
+#define __BFA_CEE_H__
+
+#include "bfa_defs_cna.h"
+#include "bfa_ioc.h"
+
+typedef void (*bfa_cee_get_attr_cbfn_t) (void *dev, enum bfa_status status);
+typedef void (*bfa_cee_get_stats_cbfn_t) (void *dev, enum bfa_status status);
+typedef void (*bfa_cee_reset_stats_cbfn_t) (void *dev, enum bfa_status status);
+typedef void (*bfa_cee_hbfail_cbfn_t) (void *dev, enum bfa_status status);
+
+struct bfa_cee_cbfn {
+	bfa_cee_get_attr_cbfn_t    get_attr_cbfn;
+	void *get_attr_cbarg;
+	bfa_cee_get_stats_cbfn_t   get_stats_cbfn;
+	void *get_stats_cbarg;
+	bfa_cee_reset_stats_cbfn_t reset_stats_cbfn;
+	void *reset_stats_cbarg;
+};
+
+struct bfa_cee {
+	void *dev;
+	bool get_attr_pending;
+	bool get_stats_pending;
+	bool reset_stats_pending;
+	enum bfa_status get_attr_status;
+	enum bfa_status get_stats_status;
+	enum bfa_status reset_stats_status;
+	struct bfa_cee_cbfn cbfn;
+	struct bfa_ioc_hbfail_notify hbfail;
+	struct bfa_cee_attr *attr;
+	struct bfa_cee_stats *stats;
+	struct bfa_dma attr_dma;
+	struct bfa_dma stats_dma;
+	struct bfa_ioc *ioc;
+	struct bfa_mbox_cmd get_cfg_mb;
+	struct bfa_mbox_cmd get_stats_mb;
+	struct bfa_mbox_cmd reset_stats_mb;
+};
+
+u32 bfa_cee_meminfo(void);
+void bfa_cee_mem_claim(struct bfa_cee *cee, u8 *dma_kva,
+	u64 dma_pa);
+void bfa_cee_attach(struct bfa_cee *cee, struct bfa_ioc *ioc, void *dev);
+void bfa_cee_detach(struct bfa_cee *cee);
+enum bfa_status bfa_cee_get_attr(struct bfa_cee *cee,
+	struct bfa_cee_attr *attr, bfa_cee_get_attr_cbfn_t cbfn, void *cbarg);
+enum bfa_status bfa_cee_get_stats(struct bfa_cee *cee,
+	struct bfa_cee_stats *stats, bfa_cee_get_stats_cbfn_t cbfn,
+	void *cbarg);
+enum bfa_status bfa_cee_reset_stats(struct bfa_cee *cee,
+	bfa_cee_reset_stats_cbfn_t cbfn, void *cbarg);
+
+#endif /* __BFA_CEE_H__ */

drivers/net/bna/bfa_defs.h

+/*
+ * Linux network driver for Brocade Converged Network Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+/*
+ * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ */
+
+#ifndef __BFA_DEFS_H__
+#define __BFA_DEFS_H__
+
+#include "cna.h"
+#include "bfa_defs_status.h"
+#include "bfa_defs_mfg_comm.h"
+
+#define BFA_STRING_32	32
+#define BFA_VERSION_LEN 64
+
+/**
+ * ---------------------- adapter definitions ------------
+ */
+
+/**
+ * BFA adapter level attributes.
+ */
+enum {
+	BFA_ADAPTER_SERIAL_NUM_LEN = STRSZ(BFA_MFG_SERIALNUM_SIZE),
+					/*
+					 *!< adapter serial num length
+					 */
+	BFA_ADAPTER_MODEL_NAME_LEN  = 16,  /*!< model name length */
+	BFA_ADAPTER_MODEL_DESCR_LEN = 128, /*!< model description length */
+	BFA_ADAPTER_MFG_NAME_LEN    = 8,   /*!< manufacturer name length */
+	BFA_ADAPTER_SYM_NAME_LEN    = 64,  /*!< adapter symbolic name length */
+	BFA_ADAPTER_OS_TYPE_LEN	    = 64,  /*!< adapter os type length */
+};
+
+struct bfa_adapter_attr {
+	char		manufacturer[BFA_ADAPTER_MFG_NAME_LEN];
+	char		serial_num[BFA_ADAPTER_SERIAL_NUM_LEN];
+	u32	card_type;
+	char		model[BFA_ADAPTER_MODEL_NAME_LEN];
+	char		model_descr[BFA_ADAPTER_MODEL_DESCR_LEN];
+	u64		pwwn;
+	char		node_symname[FC_SYMNAME_MAX];
+	char		hw_ver[BFA_VERSION_LEN];
+	char		fw_ver[BFA_VERSION_LEN];
+	char		optrom_ver[BFA_VERSION_LEN];
+	char		os_type[BFA_ADAPTER_OS_TYPE_LEN];
+	struct bfa_mfg_vpd vpd;
+	struct mac mac;
+
+	u8		nports;
+	u8		max_speed;
+	u8		prototype;
+	char	        asic_rev;
+
+	u8		pcie_gen;
+	u8		pcie_lanes_orig;
+	u8		pcie_lanes;
+	u8	        cna_capable;
+
+	u8		is_mezz;
+	u8		trunk_capable;
+};
+
+/**
+ * ---------------------- IOC definitions ------------
+ */
+
+enum {
+	BFA_IOC_DRIVER_LEN	= 16,
+	BFA_IOC_CHIP_REV_LEN 	= 8,
+};
+
+/**
+ * Driver and firmware versions.
+ */
+struct bfa_ioc_driver_attr {
+	char		driver[BFA_IOC_DRIVER_LEN];	/*!< driver name */
+	char		driver_ver[BFA_VERSION_LEN];	/*!< driver version */
+	char		fw_ver[BFA_VERSION_LEN];	/*!< firmware version */
+	char		bios_ver[BFA_VERSION_LEN];	/*!< bios version */
+	char		efi_ver[BFA_VERSION_LEN];	/*!< EFI version */
+	char		ob_ver[BFA_VERSION_LEN];	/*!< openboot version */
+};
+
+/**
+ * IOC PCI device attributes
+ */
+struct bfa_ioc_pci_attr {
+	u16	vendor_id;	/*!< PCI vendor ID */
+	u16	device_id;	/*!< PCI device ID */
+	u16	ssid;		/*!< subsystem ID */
+	u16	ssvid;		/*!< subsystem vendor ID */
+	u32	pcifn;		/*!< PCI device function */
+	u32	rsvd;		/* padding */
+	char		chip_rev[BFA_IOC_CHIP_REV_LEN];	 /*!< chip revision */
+};
+
+/**
+ * IOC states
+ */
+enum bfa_ioc_state {
+	BFA_IOC_RESET		= 1,	/*!< IOC is in reset state */
+	BFA_IOC_SEMWAIT		= 2,	/*!< Waiting for IOC h/w semaphore */
+	BFA_IOC_HWINIT		= 3,	/*!< IOC h/w is being initialized */
+	BFA_IOC_GETATTR		= 4,	/*!< IOC is being configured */
+	BFA_IOC_OPERATIONAL	= 5,	/*!< IOC is operational */
+	BFA_IOC_INITFAIL	= 6,	/*!< IOC hardware failure */
+	BFA_IOC_HBFAIL		= 7,	/*!< IOC heart-beat failure */
+	BFA_IOC_DISABLING	= 8,	/*!< IOC is being disabled */
+	BFA_IOC_DISABLED	= 9,	/*!< IOC is disabled */
+	BFA_IOC_FWMISMATCH	= 10,	/*!< IOC f/w different from drivers */
+};
+
+/**
+ * IOC firmware stats
+ */
+struct bfa_fw_ioc_stats {
+	u32	enable_reqs;
+	u32	disable_reqs;
+	u32	get_attr_reqs;
+	u32	dbg_sync;
+	u32	dbg_dump;
+	u32	unknown_reqs;
+};
+
+/**
+ * IOC driver stats
+ */
+struct bfa_ioc_drv_stats {
+	u32	ioc_isrs;
+	u32	ioc_enables;
+	u32	ioc_disables;
+	u32	ioc_hbfails;
+	u32	ioc_boots;
+	u32	stats_tmos;
+	u32	hb_count;
+	u32	disable_reqs;
+	u32	enable_reqs;
+	u32	disable_replies;
+	u32	enable_replies;
+};
+
+/**
+ * IOC statistics
+ */
+struct bfa_ioc_stats {
+	struct bfa_ioc_drv_stats drv_stats; /*!< driver IOC stats */
+	struct bfa_fw_ioc_stats fw_stats;  /*!< firmware IOC stats */
+};
+
+enum bfa_ioc_type {
+	BFA_IOC_TYPE_FC		= 1,
+	BFA_IOC_TYPE_FCoE	= 2,
+	BFA_IOC_TYPE_LL		= 3,
+};
+
+/**
+ * IOC attributes returned in queries
+ */
+struct bfa_ioc_attr {
+	enum bfa_ioc_type ioc_type;
+	enum bfa_ioc_state 		state;		/*!< IOC state      */
+	struct bfa_adapter_attr adapter_attr;	/*!< HBA attributes */
+	struct bfa_ioc_driver_attr driver_attr;	/*!< driver attr    */
+	struct bfa_ioc_pci_attr pci_attr;
+	u8				port_id;	/*!< port number    */
+	u8				rsvd[7];	/*!< 64bit align    */
+};
+
+/**
+ * ---------------------- mfg definitions ------------
+ */
+
+/**
+ * Checksum size
+ */
+#define BFA_MFG_CHKSUM_SIZE			16
+
+#define BFA_MFG_PARTNUM_SIZE			14
+#define BFA_MFG_SUPPLIER_ID_SIZE		10
+#define BFA_MFG_SUPPLIER_PARTNUM_SIZE		20
+#define BFA_MFG_SUPPLIER_SERIALNUM_SIZE		20
+#define BFA_MFG_SUPPLIER_REVISION_SIZE		4
+
+#pragma pack(1)
+
+/**
+ * @brief BFA adapter manufacturing block definition.
+ *
+ * All numerical fields are in big-endian format.
+ */
+struct bfa_mfg_block {
+	u8		version;	/*!< manufacturing block version */
+	u8		mfg_sig[3];	/*!< characters 'M', 'F', 'G' */
+	u16	mfgsize;	/*!< mfg block size */
+	u16	u16_chksum;	/*!< old u16 checksum */
+	char		brcd_serialnum[STRSZ(BFA_MFG_SERIALNUM_SIZE)];
+	char		brcd_partnum[STRSZ(BFA_MFG_PARTNUM_SIZE)];
+	u8		mfg_day;	/*!< manufacturing day */
+	u8		mfg_month;	/*!< manufacturing month */
+	u16	mfg_year;	/*!< manufacturing year */
+	u64		mfg_wwn;	/*!< wwn base for this adapter */
+	u8		num_wwn;	/*!< number of wwns assigned */
+	u8		mfg_speeds;	/*!< speeds allowed for this adapter */
+	u8		rsv[2];
+	char		supplier_id[STRSZ(BFA_MFG_SUPPLIER_ID_SIZE)];
+	char		supplier_partnum[STRSZ(BFA_MFG_SUPPLIER_PARTNUM_SIZE)];
+	char
+		supplier_serialnum[STRSZ(BFA_MFG_SUPPLIER_SERIALNUM_SIZE)];
+	char
+		supplier_revision[STRSZ(BFA_MFG_SUPPLIER_REVISION_SIZE)];
+	mac_t		mfg_mac;	/*!< mac address */
+	u8		num_mac;	/*!< number of mac addresses */
+	u8		rsv2;
+	u32	mfg_type;	/*!< card type */
+	u8		rsv3[108];
+	u8		md5_chksum[BFA_MFG_CHKSUM_SIZE]; /*!< md5 checksum */
+};
+
+#pragma pack()
+
+/**
+ * ---------------------- pci definitions ------------
+ */
+
+#define bfa_asic_id_ct(devid)			\
+	((devid) == PCI_DEVICE_ID_BROCADE_CT ||	\
+	(devid) == PCI_DEVICE_ID_BROCADE_CT_FC)
+
+#endif /* __BFA_DEFS_H__ */

drivers/net/bna/bfa_defs_cna.h

+/*
+ * Linux network driver for Brocade Converged Network Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+/*
+ * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ */
+
+#ifndef __BFA_DEFS_CNA_H__
+#define __BFA_DEFS_CNA_H__
+
+#include "bfa_defs.h"
+
+/**
+ * @brief
+ * FC physical port statistics.
+ */
+struct bfa_port_fc_stats {
+	u64	secs_reset;	/*!< Seconds since stats is reset */
+	u64	tx_frames;	/*!< Tx frames			*/
+	u64	tx_words;	/*!< Tx words			*/
+	u64	tx_lip;		/*!< Tx LIP			*/
+	u64	tx_nos;		/*!< Tx NOS			*/
+	u64	tx_ols;		/*!< Tx OLS			*/
+	u64	tx_lr;		/*!< Tx LR			*/
+	u64	tx_lrr;		/*!< Tx LRR			*/
+	u64	rx_frames;	/*!< Rx frames			*/
+	u64	rx_words;	/*!< Rx words			*/
+	u64	lip_count;	/*!< Rx LIP			*/
+	u64	nos_count;	/*!< Rx NOS			*/
+	u64	ols_count;	/*!< Rx OLS			*/
+	u64	lr_count;	/*!< Rx LR			*/
+	u64	lrr_count;	/*!< Rx LRR			*/
+	u64	invalid_crcs;	/*!< Rx CRC err frames		*/
+	u64	invalid_crc_gd_eof; /*!< Rx CRC err good EOF frames */
+	u64	undersized_frm; /*!< Rx undersized frames	*/
+	u64	oversized_frm;	/*!< Rx oversized frames	*/
+	u64	bad_eof_frm;	/*!< Rx frames with bad EOF	*/
+	u64	error_frames;	/*!< Errored frames		*/
+	u64	dropped_frames;	/*!< Dropped frames		*/
+	u64	link_failures;	/*!< Link Failure (LF) count	*/
+	u64	loss_of_syncs;	/*!< Loss of sync count		*/
+	u64	loss_of_signals; /*!< Loss of signal count	*/
+	u64	primseq_errs;	/*!< Primitive sequence protocol err. */
+	u64	bad_os_count;	/*!< Invalid ordered sets	*/
+	u64	err_enc_out;	/*!< Encoding err nonframe_8b10b */
+	u64	err_enc;	/*!< Encoding err frame_8b10b	*/
+};
+
+/**
+ * @brief
+ * Eth Physical Port statistics.
+ */
+struct bfa_port_eth_stats {
+	u64	secs_reset;	/*!< Seconds since stats is reset */
+	u64	frame_64;	/*!< Frames 64 bytes		*/
+	u64	frame_65_127;	/*!< Frames 65-127 bytes	*/
+	u64	frame_128_255;	/*!< Frames 128-255 bytes	*/
+	u64	frame_256_511;	/*!< Frames 256-511 bytes	*/
+	u64	frame_512_1023;	/*!< Frames 512-1023 bytes	*/
+	u64	frame_1024_1518; /*!< Frames 1024-1518 bytes	*/
+	u64	frame_1519_1522; /*!< Frames 1519-1522 bytes	*/
+	u64	tx_bytes;	/*!< Tx bytes			*/
+	u64	tx_packets;	 /*!< Tx packets		*/
+	u64	tx_mcast_packets; /*!< Tx multicast packets	*/
+	u64	tx_bcast_packets; /*!< Tx broadcast packets	*/
+	u64	tx_control_frame; /*!< Tx control frame		*/
+	u64	tx_drop;	/*!< Tx drops			*/
+	u64	tx_jabber;	/*!< Tx jabber			*/
+	u64	tx_fcs_error;	/*!< Tx FCS errors		*/
+	u64	tx_fragments;	/*!< Tx fragments		*/
+	u64	rx_bytes;	/*!< Rx bytes			*/
+	u64	rx_packets;	/*!< Rx packets			*/
+	u64	rx_mcast_packets; /*!< Rx multicast packets	*/
+	u64	rx_bcast_packets; /*!< Rx broadcast packets	*/
+	u64	rx_control_frames; /*!< Rx control frames	*/
+	u64	rx_unknown_opcode; /*!< Rx unknown opcode	*/
+	u64	rx_drop;	/*!< Rx drops			*/
+	u64	rx_jabber;	/*!< Rx jabber			*/
+	u64	rx_fcs_error;	/*!< Rx FCS errors		*/
+	u64	rx_alignment_error; /*!< Rx alignment errors	*/
+	u64	rx_frame_length_error; /*!< Rx frame len errors	*/
+	u64	rx_code_error;	/*!< Rx code errors		*/
+	u64	rx_fragments;	/*!< Rx fragments		*/
+	u64	rx_pause;	/*!< Rx pause			*/
+	u64	rx_zero_pause;	/*!< Rx zero pause		*/
+	u64	tx_pause;	/*!< Tx pause			*/
+	u64	tx_zero_pause;	/*!< Tx zero pause		*/
+	u64	rx_fcoe_pause;	/*!< Rx FCoE pause		*/
+	u64	rx_fcoe_zero_pause; /*!< Rx FCoE zero pause	*/
+	u64	tx_fcoe_pause;	/*!< Tx FCoE pause		*/
+	u64	tx_fcoe_zero_pause; /*!< Tx FCoE zero pause	*/
+};
+
+/**
+ * @brief
+ *		Port statistics.
+ */
+union bfa_port_stats_u {
+	struct bfa_port_fc_stats fc;
+	struct bfa_port_eth_stats eth;
+};
+
+#pragma pack(1)
+
+#define BFA_CEE_LLDP_MAX_STRING_LEN (128)
+#define BFA_CEE_DCBX_MAX_PRIORITY	(8)
+#define BFA_CEE_DCBX_MAX_PGID		(8)
+
+#define BFA_CEE_LLDP_SYS_CAP_OTHER	0x0001
+#define BFA_CEE_LLDP_SYS_CAP_REPEATER	0x0002
+#define BFA_CEE_LLDP_SYS_CAP_MAC_BRIDGE	0x0004
+#define BFA_CEE_LLDP_SYS_CAP_WLAN_AP	0x0008
+#define BFA_CEE_LLDP_SYS_CAP_ROUTER	0x0010
+#define BFA_CEE_LLDP_SYS_CAP_TELEPHONE	0x0020
+#define BFA_CEE_LLDP_SYS_CAP_DOCSIS_CD	0x0040
+#define BFA_CEE_LLDP_SYS_CAP_STATION	0x0080
+#define BFA_CEE_LLDP_SYS_CAP_CVLAN	0x0100
+#define BFA_CEE_LLDP_SYS_CAP_SVLAN	0x0200
+#define BFA_CEE_LLDP_SYS_CAP_TPMR	0x0400
+
+/* LLDP string type */
+struct bfa_cee_lldp_str {
+	u8 sub_type;
+	u8 len;
+	u8 rsvd[2];
+	u8 value[BFA_CEE_LLDP_MAX_STRING_LEN];
+};
+
+/* LLDP paramters */
+struct bfa_cee_lldp_cfg {
+	struct bfa_cee_lldp_str chassis_id;
+	struct bfa_cee_lldp_str port_id;
+	struct bfa_cee_lldp_str port_desc;
+	struct bfa_cee_lldp_str sys_name;
+	struct bfa_cee_lldp_str sys_desc;
+	struct bfa_cee_lldp_str mgmt_addr;
+	u16 time_to_live;
+	u16 enabled_system_cap;
+};
+
+enum bfa_cee_dcbx_version {
+	DCBX_PROTOCOL_PRECEE	= 1,
+	DCBX_PROTOCOL_CEE	= 2,
+};
+
+enum bfa_cee_lls {
+	/* LLS is down because the TLV not sent by the peer */
+	CEE_LLS_DOWN_NO_TLV = 0,
+	/* LLS is down as advertised by the peer */
+	CEE_LLS_DOWN	= 1,
+	CEE_LLS_UP	= 2,
+};
+
+/* CEE/DCBX parameters */
+struct bfa_cee_dcbx_cfg {
+	u8 pgid[BFA_CEE_DCBX_MAX_PRIORITY];
+	u8 pg_percentage[BFA_CEE_DCBX_MAX_PGID];
+	u8 pfc_primap; /* bitmap of priorties with PFC enabled */
+	u8 fcoe_primap; /* bitmap of priorities used for FcoE traffic */
+	u8 iscsi_primap; /* bitmap of priorities used for iSCSI traffic */
+	u8 dcbx_version; /* operating version:CEE or preCEE */
+	u8 lls_fcoe; /* FCoE Logical Link Status */
+	u8 lls_lan; /* LAN Logical Link Status */
+	u8 rsvd[2];
+};
+
+/* CEE status */
+/* Making this to tri-state for the benefit of port list command */
+enum bfa_cee_status {
+	CEE_UP = 0,
+	CEE_PHY_UP = 1,
+	CEE_LOOPBACK = 2,
+	CEE_PHY_DOWN = 3,
+};
+
+/* CEE Query */
+struct bfa_cee_attr {
+	u8	cee_status;
+	u8 error_reason;
+	struct bfa_cee_lldp_cfg lldp_remote;
+	struct bfa_cee_dcbx_cfg dcbx_remote;
+	mac_t src_mac;
+	u8 link_speed;
+	u8 nw_priority;
+	u8 filler[2];
+};
+
+/* LLDP/DCBX/CEE Statistics */
+struct bfa_cee_stats {
+	u32	lldp_tx_frames;		/*!< LLDP Tx Frames */
+	u32	lldp_rx_frames;		/*!< LLDP Rx Frames */
+	u32	lldp_rx_frames_invalid;	/*!< LLDP Rx Frames invalid */
+	u32	lldp_rx_frames_new;	/*!< LLDP Rx Frames new */
+	u32	lldp_tlvs_unrecognized;	/*!< LLDP Rx unrecognized TLVs */
+	u32	lldp_rx_shutdown_tlvs;	/*!< LLDP Rx shutdown TLVs */
+	u32	lldp_info_aged_out;	/*!< LLDP remote info aged out */
+	u32	dcbx_phylink_ups;	/*!< DCBX phy link ups */
+	u32	dcbx_phylink_downs;	/*!< DCBX phy link downs */
+	u32	dcbx_rx_tlvs;		/*!< DCBX Rx TLVs */
+	u32	dcbx_rx_tlvs_invalid;	/*!< DCBX Rx TLVs invalid */
+	u32	dcbx_control_tlv_error;	/*!< DCBX control TLV errors */
+	u32	dcbx_feature_tlv_error;	/*!< DCBX feature TLV errors */
+	u32	dcbx_cee_cfg_new;	/*!< DCBX new CEE cfg rcvd */
+	u32	cee_status_down;	/*!< CEE status down */
+	u32	cee_status_up;		/*!< CEE status up */
+	u32	cee_hw_cfg_changed;	/*!< CEE hw cfg changed */
+	u32	cee_rx_invalid_cfg;	/*!< CEE invalid cfg */
+};
+
+#pragma pack()
+
+#endif	/* __BFA_DEFS_CNA_H__ */

drivers/net/bna/bfa_defs_mfg_comm.h

+/*
+ * Linux network driver for Brocade Converged Network Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+/*
+ * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ */
+#ifndef __BFA_DEFS_MFG_COMM_H__
+#define __BFA_DEFS_MFG_COMM_H__
+
+#include "cna.h"
+
+/**
+ * Manufacturing block version
+ */
+#define BFA_MFG_VERSION				2
+#define BFA_MFG_VERSION_UNINIT			0xFF
+
+/**
+ * Manufacturing block encrypted version
+ */
+#define BFA_MFG_ENC_VER				2
+
+/**
+ * Manufacturing block version 1 length
+ */
+#define BFA_MFG_VER1_LEN			128
+
+/**
+ * Manufacturing block header length
+ */
+#define BFA_MFG_HDR_LEN				4
+
+#define BFA_MFG_SERIALNUM_SIZE			11
+#define STRSZ(_n)				(((_n) + 4) & ~3)
+
+/**
+ * Manufacturing card type
+ */
+enum {
+	BFA_MFG_TYPE_CB_MAX  = 825,      /*!< Crossbow card type max	*/
+	BFA_MFG_TYPE_FC8P2   = 825,      /*!< 8G 2port FC card		*/
+	BFA_MFG_TYPE_FC8P1   = 815,      /*!< 8G 1port FC card		*/
+	BFA_MFG_TYPE_FC4P2   = 425,      /*!< 4G 2port FC card		*/
+	BFA_MFG_TYPE_FC4P1   = 415,      /*!< 4G 1port FC card		*/
+	BFA_MFG_TYPE_CNA10P2 = 1020,     /*!< 10G 2port CNA card	*/
+	BFA_MFG_TYPE_CNA10P1 = 1010,     /*!< 10G 1port CNA card	*/
+	BFA_MFG_TYPE_JAYHAWK = 804,	 /*!< Jayhawk mezz card		*/
+	BFA_MFG_TYPE_WANCHESE = 1007,	 /*!< Wanchese mezz card	*/
+	BFA_MFG_TYPE_ASTRA    = 807,	 /*!< Astra mezz card		*/
+	BFA_MFG_TYPE_LIGHTNING_P0 = 902, /*!< Lightning mezz card - old	*/
+	BFA_MFG_TYPE_LIGHTNING = 1741,	 /*!< Lightning mezz card	*/
+	BFA_MFG_TYPE_INVALID = 0,	 /*!< Invalid card type		*/
+};
+
+#pragma pack(1)
+
+/**
+ * Check if 1-port card
+ */
+#define bfa_mfg_is_1port(type) (( \
+	(type) == BFA_MFG_TYPE_FC8P1 || \
+	(type) == BFA_MFG_TYPE_FC4P1 || \
+	(type) == BFA_MFG_TYPE_CNA10P1))
+
+/**
+ * Check if Mezz card
+ */
+#define bfa_mfg_is_mezz(type) (( \
+	(type) == BFA_MFG_TYPE_JAYHAWK || \
+	(type) == BFA_MFG_TYPE_WANCHESE || \
+	(type) == BFA_MFG_TYPE_ASTRA || \
+	(type) == BFA_MFG_TYPE_LIGHTNING_P0 || \
+	(type) == BFA_MFG_TYPE_LIGHTNING))
+
+/**
+ * Check if card type valid
+ */
+#define bfa_mfg_is_card_type_valid(type) (( \
+	(type) == BFA_MFG_TYPE_FC8P2 || \
+	(type) == BFA_MFG_TYPE_FC8P1 || \
+	(type) == BFA_MFG_TYPE_FC4P2 || \
+	(type) == BFA_MFG_TYPE_FC4P1 || \
+	(type) == BFA_MFG_TYPE_CNA10P2 || \
+	(type) == BFA_MFG_TYPE_CNA10P1 || \
+	bfa_mfg_is_mezz(type)))
+
+/**
+ * Check if the card having old wwn/mac handling
+ */
+#define bfa_mfg_is_old_wwn_mac_model(type) (( \
+	(type) == BFA_MFG_TYPE_FC8P2 || \
+	(type) == BFA_MFG_TYPE_FC8P1 || \
+	(type) == BFA_MFG_TYPE_FC4P2 || \
+	(type) == BFA_MFG_TYPE_FC4P1 || \
+	(type) == BFA_MFG_TYPE_CNA10P2 || \
+	(type) == BFA_MFG_TYPE_CNA10P1 || \
+	(type) == BFA_MFG_TYPE_JAYHAWK || \
+	(type) == BFA_MFG_TYPE_WANCHESE))
+
+#define bfa_mfg_increment_wwn_mac(m, i)				\
+do {								\
+	u32 t = ((m)[0] << 16) | ((m)[1] << 8) | (m)[2];	\
+	t += (i);						\
+	(m)[0] = (t >> 16) & 0xFF;				\
+	(m)[1] = (t >> 8) & 0xFF;				\
+	(m)[2] = t & 0xFF;					\
+} while (0)
+
+#define bfa_mfg_adapter_prop_init_flash(card_type, prop)	\
+do {								\
+	switch ((card_type)) {					\
+	case BFA_MFG_TYPE_FC8P2:				\
+	case BFA_MFG_TYPE_JAYHAWK:				\
+	case BFA_MFG_TYPE_ASTRA:				\
+		(prop) = BFI_ADAPTER_SETP(NPORTS, 2) |		\
+			BFI_ADAPTER_SETP(SPEED, 8);		\
+		break;						\
+	case BFA_MFG_TYPE_FC8P1:				\
+		(prop) = BFI_ADAPTER_SETP(NPORTS, 1) |		\
+			BFI_ADAPTER_SETP(SPEED, 8);		\
+		break;						\
+	case BFA_MFG_TYPE_FC4P2:				\
+		(prop) = BFI_ADAPTER_SETP(NPORTS, 2) |		\
+			BFI_ADAPTER_SETP(SPEED, 4);		\
+		break;						\
+	case BFA_MFG_TYPE_FC4P1:				\
+		(prop) = BFI_ADAPTER_SETP(NPORTS, 1) |		\
+			BFI_ADAPTER_SETP(SPEED, 4);		\
+		break;						\
+	case BFA_MFG_TYPE_CNA10P2:				\
+	case BFA_MFG_TYPE_WANCHESE:				\
+	case BFA_MFG_TYPE_LIGHTNING_P0:				\
+	case BFA_MFG_TYPE_LIGHTNING:				\
+		(prop) = BFI_ADAPTER_SETP(NPORTS, 2);		\
+		(prop) |= BFI_ADAPTER_SETP(SPEED, 10);		\
+		break;						\
+	case BFA_MFG_TYPE_CNA10P1:				\
+		(prop) = BFI_ADAPTER_SETP(NPORTS, 1);		\
+		(prop) |= BFI_ADAPTER_SETP(SPEED, 10);		\
+		break;						\
+	default:						\
+		(prop) = BFI_ADAPTER_UNSUPP;			\
+	}							\
+} while (0)
+
+enum {
+	CB_GPIO_TTV	= (1),		/*!< TTV debug capable cards	*/
+	CB_GPIO_FC8P2   = (2),		/*!< 8G 2port FC card		*/
+	CB_GPIO_FC8P1   = (3),		/*!< 8G 1port FC card		*/
+	CB_GPIO_FC4P2   = (4),		/*!< 4G 2port FC card		*/
+	CB_GPIO_FC4P1   = (5),		/*!< 4G 1port FC card		*/
+	CB_GPIO_DFLY    = (6),		/*!< 8G 2port FC mezzanine card	*/
+	CB_GPIO_PROTO   = (1 << 7)	/*!< 8G 2port FC prototypes	*/
+};
+
+#define bfa_mfg_adapter_prop_init_gpio(gpio, card_type, prop)	\
+do {								\
+	if ((gpio) & CB_GPIO_PROTO) {				\
+		(prop) |= BFI_ADAPTER_PROTO;			\
+		(gpio) &= ~CB_GPIO_PROTO;			\
+	}							\
+	switch ((gpio)) {					\
+	case CB_GPIO_TTV:					\
+		(prop) |= BFI_ADAPTER_TTV;			\
+	case CB_GPIO_DFLY:					\
+	case CB_GPIO_FC8P2:					\
+		(prop) |= BFI_ADAPTER_SETP(NPORTS, 2);		\
+		(prop) |= BFI_ADAPTER_SETP(SPEED, 8);		\
+		(card_type) = BFA_MFG_TYPE_FC8P2;		\
+		break;						\
+	case CB_GPIO_FC8P1:					\
+		(prop) |= BFI_ADAPTER_SETP(NPORTS, 1);		\
+		(prop) |= BFI_ADAPTER_SETP(SPEED, 8);		\
+		(card_type) = BFA_MFG_TYPE_FC8P1;		\
+		break;						\
+	case CB_GPIO_FC4P2:					\
+		(prop) |= BFI_ADAPTER_SETP(NPORTS, 2);		\
+		(prop) |= BFI_ADAPTER_SETP(SPEED, 4);		\
+		(card_type) = BFA_MFG_TYPE_FC4P2;		\
+		break;						\
+	case CB_GPIO_FC4P1:					\
+		(prop) |= BFI_ADAPTER_SETP(NPORTS, 1);		\
+		(prop) |= BFI_ADAPTER_SETP(SPEED, 4);		\
+		(card_type) = BFA_MFG_TYPE_FC4P1;		\
+		break;						\
+	default:						\
+		(prop) |= BFI_ADAPTER_UNSUPP;			\
+		(card_type) = BFA_MFG_TYPE_INVALID;		\
+	}							\
+} while (0)
+
+/**
+ * VPD data length
+ */
+#define BFA_MFG_VPD_LEN			512
+#define BFA_MFG_VPD_LEN_INVALID		0
+
+#define BFA_MFG_VPD_PCI_HDR_OFF		137
+#define BFA_MFG_VPD_PCI_VER_MASK	0x07	/*!< version mask 3 bits */
+#define BFA_MFG_VPD_PCI_VDR_MASK	0xf8	/*!< vendor mask 5 bits */
+
+/**
+ * VPD vendor tag
+ */
+enum {
+	BFA_MFG_VPD_UNKNOWN	= 0,     /*!< vendor unknown 		*/
+	BFA_MFG_VPD_IBM 	= 1,     /*!< vendor IBM 		*/
+	BFA_MFG_VPD_HP  	= 2,     /*!< vendor HP  		*/
+	BFA_MFG_VPD_DELL  	= 3,     /*!< vendor DELL  		*/
+	BFA_MFG_VPD_PCI_IBM 	= 0x08,  /*!< PCI VPD IBM     		*/
+	BFA_MFG_VPD_PCI_HP  	= 0x10,  /*!< PCI VPD HP		*/
+	BFA_MFG_VPD_PCI_DELL  	= 0x20,  /*!< PCI VPD DELL		*/
+	BFA_MFG_VPD_PCI_BRCD 	= 0xf8,  /*!< PCI VPD Brocade 		*/
+};
+
+/**
+ * @brief BFA adapter flash vpd data definition.
+ *
+ * All numerical fields are in big-endian format.
+ */
+struct bfa_mfg_vpd {
+	u8		version;	/*!< vpd data version */
+	u8		vpd_sig[3];	/*!< characters 'V', 'P', 'D' */
+	u8		chksum;		/*!< u8 checksum */
+	u8		vendor;		/*!< vendor */
+	u8 	len;		/*!< vpd data length excluding header */
+	u8 	rsv;
+	u8		data[BFA_MFG_VPD_LEN];	/*!< vpd data */
+};
+
+#pragma pack()
+
+#endif /* __BFA_DEFS_MFG_H__ */

drivers/net/bna/bfa_defs_status.h

+/*
+ * Linux network driver for Brocade Converged Network Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+/*
+ * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ */
+#ifndef __BFA_DEFS_STATUS_H__
+#define __BFA_DEFS_STATUS_H__
+
+/**
+ * API status return values
+ *
+ * NOTE: The error msgs are auto generated from the comments. Only singe line
+ * comments are supported
+ */
+enum bfa_status {
+	BFA_STATUS_OK 		= 0,
+	BFA_STATUS_FAILED 	= 1,
+	BFA_STATUS_EINVAL 	= 2,
+	BFA_STATUS_ENOMEM 	= 3,
+	BFA_STATUS_ENOSYS 	= 4,
+	BFA_STATUS_ETIMER 	= 5,
+	BFA_STATUS_EPROTOCOL 	= 6,
+	BFA_STATUS_ENOFCPORTS 	= 7,
+	BFA_STATUS_NOFLASH 	= 8,
+	BFA_STATUS_BADFLASH 	= 9,
+	BFA_STATUS_SFP_UNSUPP 	= 10,
+	BFA_STATUS_UNKNOWN_VFID = 11,
+	BFA_STATUS_DATACORRUPTED = 12,
+	BFA_STATUS_DEVBUSY 	= 13,
+	BFA_STATUS_ABORTED 	= 14,
+	BFA_STATUS_NODEV 	= 15,
+	BFA_STATUS_HDMA_FAILED 	= 16,
+	BFA_STATUS_FLASH_BAD_LEN = 17,
+	BFA_STATUS_UNKNOWN_LWWN = 18,
+	BFA_STATUS_UNKNOWN_RWWN = 19,
+	BFA_STATUS_FCPT_LS_RJT 	= 20,
+	BFA_STATUS_VPORT_EXISTS = 21,
+	BFA_STATUS_VPORT_MAX 	= 22,
+	BFA_STATUS_UNSUPP_SPEED = 23,
+	BFA_STATUS_INVLD_DFSZ 	= 24,
+	BFA_STATUS_CNFG_FAILED 	= 25,
+	BFA_STATUS_CMD_NOTSUPP 	= 26,
+	BFA_STATUS_NO_ADAPTER 	= 27,
+	BFA_STATUS_LINKDOWN 	= 28,
+	BFA_STATUS_FABRIC_RJT 	= 29,
+	BFA_STATUS_UNKNOWN_VWWN = 30,
+	BFA_STATUS_NSLOGIN_FAILED = 31,
+	BFA_STATUS_NO_RPORTS 	= 32,
+	BFA_STATUS_NSQUERY_FAILED = 33,
+	BFA_STATUS_PORT_OFFLINE = 34,
+	BFA_STATUS_RPORT_OFFLINE = 35,
+	BFA_STATUS_TGTOPEN_FAILED = 36,
+	BFA_STATUS_BAD_LUNS 	= 37,
+	BFA_STATUS_IO_FAILURE 	= 38,
+	BFA_STATUS_NO_FABRIC 	= 39,
+	BFA_STATUS_EBADF 	= 40,
+	BFA_STATUS_EINTR 	= 41,
+	BFA_STATUS_EIO 		= 42,
+	BFA_STATUS_ENOTTY 	= 43,
+	BFA_STATUS_ENXIO 	= 44,
+	BFA_STATUS_EFOPEN 	= 45,
+	BFA_STATUS_VPORT_WWN_BP = 46,
+	BFA_STATUS_PORT_NOT_DISABLED = 47,
+	BFA_STATUS_BADFRMHDR 	= 48,
+	BFA_STATUS_BADFRMSZ 	= 49,
+	BFA_STATUS_MISSINGFRM 	= 50,
+	BFA_STATUS_LINKTIMEOUT 	= 51,
+	BFA_STATUS_NO_FCPIM_NEXUS = 52,
+	BFA_STATUS_CHECKSUM_FAIL = 53,
+	BFA_STATUS_GZME_FAILED 	= 54,
+	BFA_STATUS_SCSISTART_REQD = 55,
+	BFA_STATUS_IOC_FAILURE 	= 56,
+	BFA_STATUS_INVALID_WWN 	= 57,
+	BFA_STATUS_MISMATCH 	= 58,
+	BFA_STATUS_IOC_ENABLED 	= 59,
+	BFA_STATUS_ADAPTER_ENABLED = 60,
+	BFA_STATUS_IOC_NON_OP 	= 61,
+	BFA_STATUS_ADDR_MAP_FAILURE = 62,
+	BFA_STATUS_SAME_NAME 	= 63,
+	BFA_STATUS_PENDING      = 64,
+	BFA_STATUS_8G_SPD	= 65,
+	BFA_STATUS_4G_SPD	= 66,
+	BFA_STATUS_AD_IS_ENABLE = 67,
+	BFA_STATUS_EINVAL_TOV 	= 68,
+	BFA_STATUS_EINVAL_QDEPTH = 69,
+	BFA_STATUS_VERSION_FAIL = 70,
+	BFA_STATUS_DIAG_BUSY    = 71,
+	BFA_STATUS_BEACON_ON	= 72,
+	BFA_STATUS_BEACON_OFF	= 73,
+	BFA_STATUS_LBEACON_ON   = 74,
+	BFA_STATUS_LBEACON_OFF	= 75,
+	BFA_STATUS_PORT_NOT_INITED = 76,
+	BFA_STATUS_RPSC_ENABLED = 77,
+	BFA_STATUS_ENOFSAVE 	= 78,
+	BFA_STATUS_BAD_FILE		= 79,
+	BFA_STATUS_RLIM_EN		= 80,
+	BFA_STATUS_RLIM_DIS		= 81,
+	BFA_STATUS_IOC_DISABLED  = 82,
+	BFA_STATUS_ADAPTER_DISABLED  = 83,
+	BFA_STATUS_BIOS_DISABLED  = 84,
+	BFA_STATUS_AUTH_ENABLED  = 85,
+	BFA_STATUS_AUTH_DISABLED  = 86,
+	BFA_STATUS_ERROR_TRL_ENABLED  = 87,
+	BFA_STATUS_ERROR_QOS_ENABLED  = 88,
+	BFA_STATUS_NO_SFP_DEV = 89,
+	BFA_STATUS_MEMTEST_FAILED = 90,
+	BFA_STATUS_INVALID_DEVID = 91,
+	BFA_STATUS_QOS_ENABLED = 92,
+	BFA_STATUS_QOS_DISABLED = 93,
+	BFA_STATUS_INCORRECT_DRV_CONFIG = 94,
+	BFA_STATUS_REG_FAIL = 95,
+	BFA_STATUS_IM_INV_CODE = 96,
+	BFA_STATUS_IM_INV_VLAN = 97,
+	BFA_STATUS_IM_INV_ADAPT_NAME = 98,
+	BFA_STATUS_IM_LOW_RESOURCES = 99,
+	BFA_STATUS_IM_VLANID_IS_PVID = 100,
+	BFA_STATUS_IM_VLANID_EXISTS = 101,
+	BFA_STATUS_IM_FW_UPDATE_FAIL = 102,
+	BFA_STATUS_PORTLOG_ENABLED = 103,
+	BFA_STATUS_PORTLOG_DISABLED = 104,
+	BFA_STATUS_FILE_NOT_FOUND = 105,
+	BFA_STATUS_QOS_FC_ONLY = 106,
+	BFA_STATUS_RLIM_FC_ONLY = 107,
+	BFA_STATUS_CT_SPD = 108,
+	BFA_STATUS_LEDTEST_OP = 109,
+	BFA_STATUS_CEE_NOT_DN = 110,
+	BFA_STATUS_10G_SPD = 111,
+	BFA_STATUS_IM_INV_TEAM_NAME = 112,
+	BFA_STATUS_IM_DUP_TEAM_NAME = 113,
+	BFA_STATUS_IM_ADAPT_ALREADY_IN_TEAM = 114,
+	BFA_STATUS_IM_ADAPT_HAS_VLANS = 115,
+	BFA_STATUS_IM_PVID_MISMATCH = 116,
+	BFA_STATUS_IM_LINK_SPEED_MISMATCH = 117,
+	BFA_STATUS_IM_MTU_MISMATCH = 118,
+	BFA_STATUS_IM_RSS_MISMATCH = 119,
+	BFA_STATUS_IM_HDS_MISMATCH = 120,
+	BFA_STATUS_IM_OFFLOAD_MISMATCH = 121,
+	BFA_STATUS_IM_PORT_PARAMS = 122,
+	BFA_STATUS_IM_PORT_NOT_IN_TEAM = 123,
+	BFA_STATUS_IM_CANNOT_REM_PRI = 124,
+	BFA_STATUS_IM_MAX_PORTS_REACHED = 125,
+	BFA_STATUS_IM_LAST_PORT_DELETE = 126,
+	BFA_STATUS_IM_NO_DRIVER = 127,
+	BFA_STATUS_IM_MAX_VLANS_REACHED = 128,
+	BFA_STATUS_TOMCAT_SPD_NOT_ALLOWED = 129,
+	BFA_STATUS_NO_MINPORT_DRIVER = 130,
+	BFA_STATUS_CARD_TYPE_MISMATCH = 131,
+	BFA_STATUS_BAD_ASICBLK = 132,
+	BFA_STATUS_NO_DRIVER = 133,
+	BFA_STATUS_INVALID_MAC = 134,
+	BFA_STATUS_IM_NO_VLAN = 135,
+	BFA_STATUS_IM_ETH_LB_FAILED = 136,
+	BFA_STATUS_IM_PVID_REMOVE = 137,
+	BFA_STATUS_IM_PVID_EDIT = 138,
+	BFA_STATUS_CNA_NO_BOOT = 139,
+	BFA_STATUS_IM_PVID_NON_ZERO = 140,
+	BFA_STATUS_IM_INETCFG_LOCK_FAILED = 141,
+	BFA_STATUS_IM_GET_INETCFG_FAILED = 142,
+	BFA_STATUS_IM_NOT_BOUND = 143,
+	BFA_STATUS_INSUFFICIENT_PERMS = 144,
+	BFA_STATUS_IM_INV_VLAN_NAME = 145,
+	BFA_STATUS_CMD_NOTSUPP_CNA = 146,
+	BFA_STATUS_IM_PASSTHRU_EDIT = 147,
+	BFA_STATUS_IM_BIND_FAILED = 148,
+	BFA_STATUS_IM_UNBIND_FAILED = 149,
+	BFA_STATUS_IM_PORT_IN_TEAM = 150,
+	BFA_STATUS_IM_VLAN_NOT_FOUND = 151,
+	BFA_STATUS_IM_TEAM_NOT_FOUND = 152,
+	BFA_STATUS_IM_TEAM_CFG_NOT_ALLOWED = 153,
+	BFA_STATUS_PBC = 154,
+	BFA_STATUS_DEVID_MISSING = 155,
+	BFA_STATUS_BAD_FWCFG = 156,
+	BFA_STATUS_CREATE_FILE = 157,
+	BFA_STATUS_INVALID_VENDOR = 158,
+	BFA_STATUS_SFP_NOT_READY = 159,
+	BFA_STATUS_FLASH_UNINIT = 160,
+	BFA_STATUS_FLASH_EMPTY = 161,
+	BFA_STATUS_FLASH_CKFAIL = 162,
+	BFA_STATUS_TRUNK_UNSUPP = 163,
+	BFA_STATUS_TRUNK_ENABLED = 164,
+	BFA_STATUS_TRUNK_DISABLED  = 165,
+	BFA_STATUS_TRUNK_ERROR_TRL_ENABLED = 166,
+	BFA_STATUS_BOOT_CODE_UPDATED = 167,
+	BFA_STATUS_BOOT_VERSION = 168,
+	BFA_STATUS_CARDTYPE_MISSING = 169,
+	BFA_STATUS_INVALID_CARDTYPE = 170,
+	BFA_STATUS_NO_TOPOLOGY_FOR_CNA = 171,
+	BFA_STATUS_IM_VLAN_OVER_TEAM_DELETE_FAILED = 172,
+	BFA_STATUS_ETHBOOT_ENABLED  = 173,
+	BFA_STATUS_ETHBOOT_DISABLED  = 174,
+	BFA_STATUS_IOPROFILE_OFF = 175,
+	BFA_STATUS_NO_PORT_INSTANCE = 176,
+	BFA_STATUS_BOOT_CODE_TIMEDOUT = 177,
+	BFA_STATUS_NO_VPORT_LOCK = 178,
+	BFA_STATUS_VPORT_NO_CNFG = 179,
+	BFA_STATUS_MAX_VAL
+};
+
+enum bfa_eproto_status {
+	BFA_EPROTO_BAD_ACCEPT = 0,
+	BFA_EPROTO_UNKNOWN_RSP = 1
+};
+
+#endif /* __BFA_DEFS_STATUS_H__ */

drivers/net/bna/bfa_sm.h

+/*
+ * Linux network driver for Brocade Converged Network Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+/*
+ * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ */
+
+/**
+ * @file bfasm.h State machine defines
+ */
+
+#ifndef __BFA_SM_H__
+#define __BFA_SM_H__
+
+#include "cna.h"
+
+typedef void (*bfa_sm_t)(void *sm, int event);
+
+/**
+ * oc - object class eg. bfa_ioc
+ * st - state, eg. reset
+ * otype - object type, eg. struct bfa_ioc
+ * etype - object type, eg. enum ioc_event
+ */
+#define bfa_sm_state_decl(oc, st, otype, etype)		\
+	static void oc ## _sm_ ## st(otype * fsm, etype event)
+
+#define bfa_sm_set_state(_sm, _state)	((_sm)->sm = (bfa_sm_t)(_state))
+#define bfa_sm_send_event(_sm, _event)	((_sm)->sm((_sm), (_event)))
+#define bfa_sm_get_state(_sm)		((_sm)->sm)
+#define bfa_sm_cmp_state(_sm, _state)	((_sm)->sm == (bfa_sm_t)(_state))
+
+/**
+ * For converting from state machine function to state encoding.
+ */
+struct bfa_sm_table {
+	bfa_sm_t	sm;	/*!< state machine function	*/
+	int		state;	/*!< state machine encoding	*/
+	char		*name;	/*!< state name for display	*/
+};
+#define BFA_SM(_sm)	((bfa_sm_t)(_sm))
+
+/**
+ * State machine with entry actions.
+ */
+typedef void (*bfa_fsm_t)(void *fsm, int event);
+
+/**
+ * oc - object class eg. bfa_ioc
+ * st - state, eg. reset
+ * otype - object type, eg. struct bfa_ioc
+ * etype - object type, eg. enum ioc_event
+ */
+#define bfa_fsm_state_decl(oc, st, otype, etype)		\
+	static void oc ## _sm_ ## st(otype * fsm, etype event);	\
+	static void oc ## _sm_ ## st ## _entry(otype * fsm)
+
+#define bfa_fsm_set_state(_fsm, _state) do {	\
+	(_fsm)->fsm = (bfa_fsm_t)(_state);	\
+	_state ## _entry(_fsm);			\
+} while (0)
+
+#define bfa_fsm_send_event(_fsm, _event)	((_fsm)->fsm((_fsm), (_event)))
+#define bfa_fsm_get_state(_fsm)			((_fsm)->fsm)
+#define bfa_fsm_cmp_state(_fsm, _state)		\
+	((_fsm)->fsm == (bfa_fsm_t)(_state))
+
+static inline int
+bfa_sm_to_state(struct bfa_sm_table *smt, bfa_sm_t sm)
+{
+	int	i = 0;
+
+	while (smt[i].sm && smt[i].sm != sm)
+		i++;
+	return smt[i].state;
+}
+#endif

drivers/net/bna/bfa_wc.h

+/*
+ * Linux network driver for Brocade Converged Network Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+/*
+ * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ */
+
+/**
+ * @file bfa_wc.h Generic wait counter.
+ */
+
+#ifndef __BFA_WC_H__
+#define __BFA_WC_H__
+
+typedef void (*bfa_wc_resume_t) (void *cbarg);
+
+struct bfa_wc {
+	bfa_wc_resume_t wc_resume;
+	void		*wc_cbarg;
+	int		wc_count;
+};
+
+static inline void
+bfa_wc_up(struct bfa_wc *wc)
+{
+	wc->wc_count++;
+}
+
+static inline void
+bfa_wc_down(struct bfa_wc *wc)
+{
+	wc->wc_count--;
+	if (wc->wc_count == 0)
+		wc->wc_resume(wc->wc_cbarg);
+}
+
+/**
+ * Initialize a waiting counter.
+ */
+static inline void
+bfa_wc_init(struct bfa_wc *wc, bfa_wc_resume_t wc_resume, void *wc_cbarg)
+{
+	wc->wc_resume = wc_resume;
+	wc->wc_cbarg = wc_cbarg;
+	wc->wc_count = 0;
+	bfa_wc_up(wc);
+}
+
+/**
+ * Wait for counter to reach zero
+ */
+static inline void
+bfa_wc_wait(struct bfa_wc *wc)
+{
+	bfa_wc_down(wc);
+}
+
+#endif

drivers/net/bna/bfi_cna.h

+/*
+ * Linux network driver for Brocade Converged Network Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+/*
+ * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ */
+#ifndef __BFI_CNA_H__
+#define __BFI_CNA_H__
+
+#include "bfi.h"
+#include "bfa_defs_cna.h"
+
+#pragma pack(1)
+
+enum bfi_port_h2i {
+	BFI_PORT_H2I_ENABLE_REQ		= (1),
+	BFI_PORT_H2I_DISABLE_REQ	= (2),
+	BFI_PORT_H2I_GET_STATS_REQ	= (3),
+	BFI_PORT_H2I_CLEAR_STATS_REQ	= (4),
+};
+
+enum bfi_port_i2h {
+	BFI_PORT_I2H_ENABLE_RSP		= BFA_I2HM(1),
+	BFI_PORT_I2H_DISABLE_RSP	= BFA_I2HM(2),
+	BFI_PORT_I2H_GET_STATS_RSP	= BFA_I2HM(3),
+	BFI_PORT_I2H_CLEAR_STATS_RSP	= BFA_I2HM(4),
+};
+
+/**
+ * Generic REQ type
+ */
+struct bfi_port_generic_req {
+	struct bfi_mhdr mh;		/*!< msg header			    */
+	u32	msgtag;		/*!< msgtag for reply		    */
+	u32	rsvd;
+};
+
+/**
+ * Generic RSP type
+ */
+struct bfi_port_generic_rsp {
+	struct bfi_mhdr mh;		/*!< common msg header		    */
+	u8		status;		/*!< port enable status		    */
+	u8		rsvd[3];
+	u32	msgtag;		/*!< msgtag for reply		    */
+};
+
+/**
+ * @todo
+ * BFI_PORT_H2I_ENABLE_REQ
+ */
+
+/**
+ * @todo
+ * BFI_PORT_I2H_ENABLE_RSP
+ */
+
+/**
+ * BFI_PORT_H2I_DISABLE_REQ
+ */
+
+/**
+ * BFI_PORT_I2H_DISABLE_RSP
+ */
+
+/**
+ * BFI_PORT_H2I_GET_STATS_REQ
+ */
+struct bfi_port_get_stats_req {
+	struct bfi_mhdr mh;		/*!< common msg header		    */
+	union bfi_addr_u   dma_addr;
+};
+
+/**
+ * BFI_PORT_I2H_GET_STATS_RSP
+ */
+
+/**
+ * BFI_PORT_H2I_CLEAR_STATS_REQ
+ */
+
+/**
+ * BFI_PORT_I2H_CLEAR_STATS_RSP
+ */
+
+union bfi_port_h2i_msg_u {
+	struct bfi_mhdr mh;
+	struct bfi_port_generic_req enable_req;
+	struct bfi_port_generic_req disable_req;
+	struct bfi_port_get_stats_req getstats_req;
+	struct bfi_port_generic_req clearstats_req;
+};
+
+union bfi_port_i2h_msg_u {
+	struct bfi_mhdr mh;
+	struct bfi_port_generic_rsp enable_rsp;
+	struct bfi_port_generic_rsp disable_rsp;
+	struct bfi_port_generic_rsp getstats_rsp;
+	struct bfi_port_generic_rsp clearstats_rsp;
+};
+
+/* @brief Mailbox commands from host to (DCBX/LLDP) firmware */
+enum bfi_cee_h2i_msgs {
+	BFI_CEE_H2I_GET_CFG_REQ = 1,
+	BFI_CEE_H2I_RESET_STATS = 2,
+	BFI_CEE_H2I_GET_STATS_REQ = 3,
+};
+
+/* @brief Mailbox reply and AEN messages from DCBX/LLDP firmware to host */
+enum bfi_cee_i2h_msgs {
+	BFI_CEE_I2H_GET_CFG_RSP = BFA_I2HM(1),
+	BFI_CEE_I2H_RESET_STATS_RSP = BFA_I2HM(2),
+	BFI_CEE_I2H_GET_STATS_RSP = BFA_I2HM(3),
+};
+
+/* Data structures */
+
+/*
+ * @brief H2I command structure for resetting the stats.
+ * BFI_CEE_H2I_RESET_STATS
+ */
+struct bfi_lldp_reset_stats {
+	struct bfi_mhdr mh;
+};
+
+/*
+ * @brief H2I command structure for resetting the stats.
+ * BFI_CEE_H2I_RESET_STATS
+ */
+struct bfi_cee_reset_stats {
+	struct bfi_mhdr mh;
+};
+
+/*
+ * @brief  get configuration  command from host
+ * BFI_CEE_H2I_GET_CFG_REQ
+ */
+struct bfi_cee_get_req {
+	struct bfi_mhdr mh;
+	union bfi_addr_u   dma_addr;
+};
+
+/*
+ * @brief reply message from firmware
+ * BFI_CEE_I2H_GET_CFG_RSP
+ */
+struct bfi_cee_get_rsp {
+	struct bfi_mhdr mh;
+	u8			cmd_status;
+	u8			rsvd[3];
+};
+
+/*
+ * @brief  get configuration  command from host
+ * BFI_CEE_H2I_GET_STATS_REQ
+ */
+struct bfi_cee_stats_req {
+	struct bfi_mhdr mh;
+	union bfi_addr_u   dma_addr;
+};
+
+/*
+ * @brief reply message from firmware
+ * BFI_CEE_I2H_GET_STATS_RSP
+ */
+struct bfi_cee_stats_rsp {
+	struct bfi_mhdr mh;
+	u8			cmd_status;
+	u8			rsvd[3];
+};
+
+/* @brief mailbox command structures from host to firmware */
+union bfi_cee_h2i_msg_u {
+	struct bfi_mhdr mh;
+	struct bfi_cee_get_req get_req;
+	struct bfi_cee_stats_req stats_req;
+};
+
+/* @brief mailbox message structures from firmware to host	*/
+union bfi_cee_i2h_msg_u {
+	struct bfi_mhdr mh;
+	struct bfi_cee_get_rsp get_rsp;
+	struct bfi_cee_stats_rsp stats_rsp;
+};
+
+#pragma pack()
+
+#endif /* __BFI_CNA_H__ */

drivers/net/bna/cna.h

+/*
+ * Linux network driver for Brocade Converged Network Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+/*
+ * Copyright (c) 2006-2010 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ */
+
+#ifndef __CNA_H__
+#define __CNA_H__
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/if_ether.h>
+#include <asm/page.h>
+#include <asm/io.h>
+#include <asm/string.h>
+
+#include <linux/list.h>
+
+#define bfa_sm_fault(__mod, __event)    do {                            \
+	pr_err("SM Assertion failure: %s: %d: event = %d", __FILE__, __LINE__, \
+		__event); \
+} while (0)
+
+extern char bfa_version[];
+
+#define	CNA_FW_FILE_CT	"ctfw_cna.bin"
+#define FC_SYMNAME_MAX	256	/*!< max name server symbolic name size */
+
+#pragma pack(1)
+
+#define MAC_ADDRLEN	(6)
+typedef struct mac { u8 mac[MAC_ADDRLEN]; } mac_t;
+
+#pragma pack()
+
+#define bfa_q_first(_q) ((void *)(((struct list_head *) (_q))->next))
+#define bfa_q_next(_qe)	(((struct list_head *) (_qe))->next)
+#define bfa_q_prev(_qe) (((struct list_head *) (_qe))->prev)
+
+/*
+ * bfa_q_qe_init - to initialize a queue element
+ */
+#define bfa_q_qe_init(_qe) {						\
+	bfa_q_next(_qe) = (struct list_head *) NULL;			\
+	bfa_q_prev(_qe) = (struct list_head *) NULL;			\
+}
+
+/*
+ * bfa_q_deq - dequeue an element from head of the queue
+ */
+#define bfa_q_deq(_q, _qe) {						\
+	if (!list_empty(_q)) {						\
+		(*((struct list_head **) (_qe))) = bfa_q_next(_q);	\
+		bfa_q_prev(bfa_q_next(*((struct list_head **) _qe))) =	\
+						(struct list_head *) (_q); \
+		bfa_q_next(_q) = bfa_q_next(*((struct list_head **) _qe)); \
+		bfa_q_qe_init(*((struct list_head **) _qe));		\
+	} else {							\
+		*((struct list_head **) (_qe)) = (struct list_head *) NULL; \
+	}								\
+}
+
+#endif /* __CNA_H__ */

drivers/net/bna/cna_fwimg.c

+/*
+ * Linux network driver for Brocade Converged Network Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+/*
+ * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ */
+#include <linux/firmware.h>
+#include "cna.h"
+
+const struct firmware *bfi_fw;
+static u32 *bfi_image_ct_cna;
+static u32 bfi_image_ct_cna_size;
+
+u32 *
+cna_read_firmware(struct pci_dev *pdev, u32 **bfi_image,
+			u32 *bfi_image_size, char *fw_name)
+{
+	const struct firmware *fw;
+
+	if (request_firmware(&fw, fw_name, &pdev->dev)) {
+		pr_alert("Can't locate firmware %s\n", fw_name);
+		goto error;
+	}
+
+	*bfi_image = (u32 *)fw->data;
+	*bfi_image_size = fw->size/sizeof(u32);
+	bfi_fw = fw;
+
+	return *bfi_image;
+error:
+	return NULL;
+}
+
+u32 *
+cna_get_firmware_buf(struct pci_dev *pdev)
+{
+	if (bfi_image_ct_cna_size == 0)
+		cna_read_firmware(pdev, &bfi_image_ct_cna,
+			&bfi_image_ct_cna_size, CNA_FW_FILE_CT);
+	return bfi_image_ct_cna;
+}
+
+u32 *
+bfa_cb_image_get_chunk(int type, u32 off)
+{
+	return (u32 *)(bfi_image_ct_cna + off);
+}
+
+u32
+bfa_cb_image_get_size(int type)
+{
+	return bfi_image_ct_cna_size;
+}

include/linux/pci_ids.h

@@ -2189,6 +2189,9 @@
 #define PCI_VENDOR_ID_ARIMA		0x161f
 
 #define PCI_VENDOR_ID_BROCADE		0x1657
+#define PCI_DEVICE_ID_BROCADE_CT	0x0014
+#define PCI_DEVICE_ID_BROCADE_FC_8G1P	0x0017
+#define PCI_DEVICE_ID_BROCADE_CT_FC	0x0021
 
 #define PCI_VENDOR_ID_SIBYTE		0x166d
 #define PCI_DEVICE_ID_BCM1250_PCI	0x0001