Commit 8b57b004 authored by Heiko Stuebner's avatar Heiko Stuebner

arm: Add basic clocks for Rockchip rk3066a SoCs

This adds a basic clock setup for rk3066a SoCs. Only the gates are
set up currently, as the mux and dividers should use the upcoming
generic devicetree bindings.

Clocks whose rates need to be known are supplied by fixed-rate
"dummy"-clocks that provide the correct rate. This is uncritical insofar
that the only bootloader currently in existence for Rockchip devices
is the propietary Rockchip one that always setups the clocks in the
necessary way.
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
Reviewed-by: default avatarMike Turquette <mturquette@linaro.org>
parent 10021488
/*
* Copyright (c) 2013 MundoReader S.L.
* Author: Heiko Stuebner <heiko@sntech.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/ {
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
/*
* This is a dummy clock, to be used as placeholder on
* other mux clocks when a specific parent clock is not
* yet implemented. It should be dropped when the driver
* is complete.
*/
dummy: dummy {
compatible = "fixed-clock";
clock-frequency = <0>;
#clock-cells = <0>;
};
xin24m: xin24m {
compatible = "fixed-clock";
clock-frequency = <24000000>;
#clock-cells = <0>;
};
dummy48m: dummy48m {
compatible = "fixed-clock";
clock-frequency = <48000000>;
#clock-cells = <0>;
};
dummy150m: dummy150m {
compatible = "fixed-clock";
clock-frequency = <150000000>;
#clock-cells = <0>;
};
clk_gates0: gate-clk@200000d0 {
compatible = "rockchip,rk2928-gate-clk";
reg = <0x200000d0 0x4>;
clocks = <&dummy>, <&dummy>,
<&dummy>, <&dummy>,
<&dummy>, <&dummy>,
<&dummy>, <&dummy>,
<&dummy>, <&dummy>,
<&dummy>, <&dummy>,
<&dummy>, <&dummy>,
<&dummy>, <&dummy>;
clock-output-names =
"gate_core_periph", "gate_cpu_gpll",
"gate_ddrphy", "gate_aclk_cpu",
"gate_hclk_cpu", "gate_pclk_cpu",
"gate_atclk_cpu", "gate_i2s0",
"gate_i2s0_frac", "gate_i2s1",
"gate_i2s1_frac", "gate_i2s2",
"gate_i2s2_frac", "gate_spdif",
"gate_spdif_frac", "gate_testclk";
#clock-cells = <1>;
};
clk_gates1: gate-clk@200000d4 {
compatible = "rockchip,rk2928-gate-clk";
reg = <0x200000d4 0x4>;
clocks = <&xin24m>, <&xin24m>,
<&xin24m>, <&dummy>,
<&dummy>, <&xin24m>,
<&xin24m>, <&dummy>,
<&xin24m>, <&dummy>,
<&xin24m>, <&dummy>,
<&xin24m>, <&dummy>,
<&xin24m>, <&dummy>;
clock-output-names =
"gate_timer0", "gate_timer1",
"gate_timer2", "gate_jtag",
"gate_aclk_lcdc1_src", "gate_otgphy0",
"gate_otgphy1", "gate_ddr_gpll",
"gate_uart0", "gate_frac_uart0",
"gate_uart1", "gate_frac_uart1",
"gate_uart2", "gate_frac_uart2",
"gate_uart3", "gate_frac_uart3";
#clock-cells = <1>;
};
clk_gates2: gate-clk@200000d8 {
compatible = "rockchip,rk2928-gate-clk";
reg = <0x200000d8 0x4>;
clocks = <&clk_gates2 1>, <&dummy>,
<&dummy>, <&dummy>,
<&dummy>, <&dummy>,
<&clk_gates2 3>, <&dummy>,
<&dummy>, <&dummy>,
<&dummy>, <&dummy48m>,
<&dummy>, <&dummy48m>,
<&dummy>, <&dummy>;
clock-output-names =
"gate_periph_src", "gate_aclk_periph",
"gate_hclk_periph", "gate_pclk_periph",
"gate_smc", "gate_mac",
"gate_hsadc", "gate_hsadc_frac",
"gate_saradc", "gate_spi0",
"gate_spi1", "gate_mmc0",
"gate_mac_lbtest", "gate_mmc1",
"gate_emmc", "gate_tsadc";
#clock-cells = <1>;
};
clk_gates3: gate-clk@200000dc {
compatible = "rockchip,rk2928-gate-clk";
reg = <0x200000dc 0x4>;
clocks = <&dummy>, <&dummy>,
<&dummy>, <&dummy>,
<&dummy>, <&dummy>,
<&dummy>, <&dummy>,
<&dummy>, <&dummy>,
<&dummy>, <&dummy>,
<&dummy>, <&dummy>,
<&dummy>, <&dummy>;
clock-output-names =
"gate_aclk_lcdc0_src", "gate_dclk_lcdc0",
"gate_dclk_lcdc1", "gate_pclkin_cif0",
"gate_pclkin_cif1", "reserved",
"reserved", "gate_cif0_out",
"gate_cif1_out", "gate_aclk_vepu",
"gate_hclk_vepu", "gate_aclk_vdpu",
"gate_hclk_vdpu", "gate_gpu_src",
"reserved", "gate_xin27m";
#clock-cells = <1>;
};
clk_gates4: gate-clk@200000e0 {
compatible = "rockchip,rk2928-gate-clk";
reg = <0x200000e0 0x4>;
clocks = <&clk_gates2 2>, <&clk_gates2 3>,
<&clk_gates2 1>, <&clk_gates2 1>,
<&clk_gates2 1>, <&clk_gates2 2>,
<&clk_gates2 2>, <&clk_gates2 2>,
<&clk_gates0 4>, <&clk_gates0 4>,
<&clk_gates0 3>, <&clk_gates0 3>,
<&clk_gates0 3>, <&clk_gates2 3>,
<&clk_gates0 4>;
clock-output-names =
"gate_hclk_peri_axi_matrix", "gate_pclk_peri_axi_matrix",
"gate_aclk_cpu_peri", "gate_aclk_peri_axi_matrix",
"gate_aclk_pei_niu", "gate_hclk_usb_peri",
"gate_hclk_peri_ahb_arbi", "gate_hclk_emem_peri",
"gate_hclk_cpubus", "gate_hclk_ahb2apb",
"gate_aclk_strc_sys", "gate_aclk_l2mem_con",
"gate_aclk_intmem", "gate_pclk_tsadc",
"gate_hclk_hdmi";
#clock-cells = <1>;
};
clk_gates5: gate-clk@200000e4 {
compatible = "rockchip,rk2928-gate-clk";
reg = <0x200000e4 0x4>;
clocks = <&clk_gates0 3>, <&clk_gates2 1>,
<&clk_gates0 5>, <&clk_gates0 5>,
<&clk_gates0 5>, <&clk_gates0 5>,
<&clk_gates0 4>, <&clk_gates0 5>,
<&clk_gates2 1>, <&clk_gates2 2>,
<&clk_gates2 2>, <&clk_gates2 2>,
<&clk_gates2 2>, <&clk_gates4 5>,
<&clk_gates4 5>, <&dummy>;
clock-output-names =
"gate_aclk_dmac1", "gate_aclk_dmac2",
"gate_pclk_efuse", "gate_pclk_tzpc",
"gate_pclk_grf", "gate_pclk_pmu",
"gate_hclk_rom", "gate_pclk_ddrupctl",
"gate_aclk_smc", "gate_hclk_nandc",
"gate_hclk_mmc0", "gate_hclk_mmc1",
"gate_hclk_emmc", "gate_hclk_otg0",
"gate_hclk_otg1", "gate_aclk_gpu";
#clock-cells = <1>;
};
clk_gates6: gate-clk@200000e8 {
compatible = "rockchip,rk2928-gate-clk";
reg = <0x200000e8 0x4>;
clocks = <&clk_gates3 0>, <&clk_gates0 4>,
<&clk_gates0 4>, <&clk_gates1 4>,
<&clk_gates0 4>, <&clk_gates3 0>,
<&clk_gates0 4>, <&clk_gates1 4>,
<&clk_gates3 0>, <&clk_gates0 4>,
<&clk_gates0 4>, <&clk_gates1 4>,
<&clk_gates0 4>, <&clk_gates3 0>,
<&dummy>, <&dummy>;
clock-output-names =
"gate_aclk_lcdc0", "gate_hclk_lcdc0",
"gate_hclk_lcdc1", "gate_aclk_lcdc1",
"gate_hclk_cif0", "gate_aclk_cif0",
"gate_hclk_cif1", "gate_aclk_cif1",
"gate_aclk_ipp", "gate_hclk_ipp",
"gate_hclk_rga", "gate_aclk_rga",
"gate_hclk_vio_bus", "gate_aclk_vio0",
"gate_aclk_vcodec", "gate_shclk_vio_h2h";
#clock-cells = <1>;
};
clk_gates7: gate-clk@200000ec {
compatible = "rockchip,rk2928-gate-clk";
reg = <0x200000ec 0x4>;
clocks = <&clk_gates2 2>, <&clk_gates0 4>,
<&clk_gates0 4>, <&clk_gates0 4>,
<&clk_gates0 4>, <&clk_gates2 2>,
<&clk_gates2 2>, <&clk_gates0 5>,
<&clk_gates0 5>, <&clk_gates0 5>,
<&clk_gates0 5>, <&clk_gates2 3>,
<&clk_gates2 3>, <&clk_gates2 3>,
<&clk_gates2 3>, <&clk_gates2 3>;
clock-output-names =
"gate_hclk_emac", "gate_hclk_spdif",
"gate_hclk_i2s0_2ch", "gate_hclk_i2s1_2ch",
"gate_hclk_i2s_8ch", "gate_hclk_hsadc",
"gate_hclk_pidf", "gate_pclk_timer0",
"gate_pclk_timer1", "gate_pclk_timer2",
"gate_pclk_pwm01", "gate_pclk_pwm23",
"gate_pclk_spi0", "gate_pclk_spi1",
"gate_pclk_saradc", "gate_pclk_wdt";
#clock-cells = <1>;
};
clk_gates8: gate-clk@200000f0 {
compatible = "rockchip,rk2928-gate-clk";
reg = <0x200000f0 0x4>;
clocks = <&clk_gates0 5>, <&clk_gates0 5>,
<&clk_gates2 3>, <&clk_gates2 3>,
<&clk_gates0 5>, <&clk_gates0 5>,
<&clk_gates2 3>, <&clk_gates2 3>,
<&clk_gates2 3>, <&clk_gates0 5>,
<&clk_gates0 5>, <&clk_gates0 5>,
<&clk_gates2 3>, <&clk_gates2 3>,
<&dummy>, <&clk_gates0 5>;
clock-output-names =
"gate_pclk_uart0", "gate_pclk_uart1",
"gate_pclk_uart2", "gate_pclk_uart3",
"gate_pclk_i2c0", "gate_pclk_i2c1",
"gate_pclk_i2c2", "gate_pclk_i2c3",
"gate_pclk_i2c4", "gate_pclk_gpio0",
"gate_pclk_gpio1", "gate_pclk_gpio2",
"gate_pclk_gpio3", "gate_pclk_gpio4",
"reserved", "gate_pclk_gpio6";
#clock-cells = <1>;
};
clk_gates9: gate-clk@200000f4 {
compatible = "rockchip,rk2928-gate-clk";
reg = <0x200000f4 0x4>;
clocks = <&dummy>, <&clk_gates0 5>,
<&dummy>, <&dummy>,
<&dummy>, <&clk_gates1 4>,
<&clk_gates0 5>, <&dummy>,
<&dummy>, <&dummy>,
<&dummy>;
clock-output-names =
"gate_clk_core_dbg", "gate_pclk_dbg",
"gate_clk_trace", "gate_atclk",
"gate_clk_l2c", "gate_aclk_vio1",
"gate_pclk_publ", "gate_aclk_intmem0",
"gate_aclk_intmem1", "gate_aclk_intmem2",
"gate_aclk_intmem3";
#clock-cells = <1>;
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment