Commit 8b9a3fde authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'arm-soc/for-4.5/devicetree-arm64' of http://github.com/Broadcom/stblinux into next/dt64

Merge "Broadcom devicetree-arm64 changes for v4.5" from Florian Fainelli:

This pull request contains Broadcom ARM64-based Device Tree changes:

- Anup Patel adds L2 cache, SMMU, syscon-based reboot, PMU v3, iProc RNG200 (HWRNG) and
  NAND flash controller support to the Northstar 2 SoCs

- Ray Jui adds the I2C Device Tree nodes to the Norsthar 2 SoCs

- Jon Mason enables the clock providers on the Norsthar 2 SoCs

* tag 'arm-soc/for-4.5/devicetree-arm64' of http://github.com/Broadcom/stblinux:
  ARM64: dts: enable clock support for Broadcom NS2
  arm64: dts: Add BRCM IPROC NAND DT node for NS2
  arm64: dts: Add I2C nodes for NS2
  arm64: dts: Add IPROC RNG200 DT node for NS2
  arm64: dts: Add ARM PMUv3 DT node in NS2 DT
  arm64: dts: Add syscon based reboot in DT for NS2
  arm64: dts: Add SMMU DT node for NS2
  arm64: dts: Add L2-cache DT node for NS2
parents 3ef6cf00 d8bd64c1
...@@ -50,10 +50,28 @@ memory { ...@@ -50,10 +50,28 @@ memory {
device_type = "memory"; device_type = "memory";
reg = <0x000000000 0x80000000 0x00000000 0x40000000>; reg = <0x000000000 0x80000000 0x00000000 0x40000000>;
}; };
};
&i2c0 {
status = "ok";
};
&i2c1 {
status = "ok";
};
&uart3 {
status = "ok";
};
soc: soc { &nand {
uart3: serial@66130000 { nandcs@0 {
status = "ok"; compatible = "brcm,nandcs";
}; reg = <0>;
nand-ecc-mode = "hw";
nand-ecc-strength = <8>;
nand-ecc-step-size = <512>;
#address-cells = <1>;
#size-cells = <1>;
}; };
}; };
...@@ -31,6 +31,7 @@ ...@@ -31,6 +31,7 @@
*/ */
#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/bcm-ns2.h>
/memreserve/ 0x84b00000 0x00000008; /memreserve/ 0x84b00000 0x00000008;
...@@ -44,36 +45,44 @@ cpus { ...@@ -44,36 +45,44 @@ cpus {
#address-cells = <2>; #address-cells = <2>;
#size-cells = <0>; #size-cells = <0>;
cpu@0 { A57_0: cpu@0 {
device_type = "cpu"; device_type = "cpu";
compatible = "arm,cortex-a57", "arm,armv8"; compatible = "arm,cortex-a57", "arm,armv8";
reg = <0 0>; reg = <0 0>;
enable-method = "spin-table"; enable-method = "spin-table";
cpu-release-addr = <0 0x84b00000>; cpu-release-addr = <0 0x84b00000>;
next-level-cache = <&CLUSTER0_L2>;
}; };
cpu@1 { A57_1: cpu@1 {
device_type = "cpu"; device_type = "cpu";
compatible = "arm,cortex-a57", "arm,armv8"; compatible = "arm,cortex-a57", "arm,armv8";
reg = <0 1>; reg = <0 1>;
enable-method = "spin-table"; enable-method = "spin-table";
cpu-release-addr = <0 0x84b00000>; cpu-release-addr = <0 0x84b00000>;
next-level-cache = <&CLUSTER0_L2>;
}; };
cpu@2 { A57_2: cpu@2 {
device_type = "cpu"; device_type = "cpu";
compatible = "arm,cortex-a57", "arm,armv8"; compatible = "arm,cortex-a57", "arm,armv8";
reg = <0 2>; reg = <0 2>;
enable-method = "spin-table"; enable-method = "spin-table";
cpu-release-addr = <0 0x84b00000>; cpu-release-addr = <0 0x84b00000>;
next-level-cache = <&CLUSTER0_L2>;
}; };
cpu@3 { A57_3: cpu@3 {
device_type = "cpu"; device_type = "cpu";
compatible = "arm,cortex-a57", "arm,armv8"; compatible = "arm,cortex-a57", "arm,armv8";
reg = <0 3>; reg = <0 3>;
enable-method = "spin-table"; enable-method = "spin-table";
cpu-release-addr = <0 0x84b00000>; cpu-release-addr = <0 0x84b00000>;
next-level-cache = <&CLUSTER0_L2>;
};
CLUSTER0_L2: l2-cache@000 {
compatible = "cache";
}; };
}; };
...@@ -89,12 +98,154 @@ IRQ_TYPE_EDGE_RISING)>, ...@@ -89,12 +98,154 @@ IRQ_TYPE_EDGE_RISING)>,
IRQ_TYPE_EDGE_RISING)>; IRQ_TYPE_EDGE_RISING)>;
}; };
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&A57_0>,
<&A57_1>,
<&A57_2>,
<&A57_3>;
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
osc: oscillator {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <25000000>;
};
iprocmed: iprocmed {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
clock-div = <2>;
clock-mult = <1>;
};
iprocslow: iprocslow {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
clock-div = <4>;
clock-mult = <1>;
};
};
soc: soc { soc: soc {
compatible = "simple-bus"; compatible = "simple-bus";
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
ranges = <0 0 0 0xffffffff>; ranges = <0 0 0 0xffffffff>;
smmu: mmu@64000000 {
compatible = "arm,mmu-500";
reg = <0x64000000 0x40000>;
#global-interrupts = <2>;
interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
mmu-masters;
};
lcpll_ddr: lcpll_ddr@6501d058 {
#clock-cells = <1>;
compatible = "brcm,ns2-lcpll-ddr";
reg = <0x6501d058 0x20>,
<0x6501c020 0x4>,
<0x6501d04c 0x4>;
clocks = <&osc>;
clock-output-names = "lcpll_ddr", "pcie_sata_usb",
"ddr", "ddr_ch2_unused",
"ddr_ch3_unused", "ddr_ch4_unused",
"ddr_ch5_unused";
};
lcpll_ports: lcpll_ports@6501d078 {
#clock-cells = <1>;
compatible = "brcm,ns2-lcpll-ports";
reg = <0x6501d078 0x20>,
<0x6501c020 0x4>,
<0x6501d054 0x4>;
clocks = <&osc>;
clock-output-names = "lcpll_ports", "wan", "rgmii",
"ports_ch2_unused",
"ports_ch3_unused",
"ports_ch4_unused",
"ports_ch5_unused";
};
genpll_scr: genpll_scr@6501d098 {
#clock-cells = <1>;
compatible = "brcm,ns2-genpll-scr";
reg = <0x6501d098 0x32>,
<0x6501c020 0x4>,
<0x6501d044 0x4>;
clocks = <&osc>;
clock-output-names = "genpll_scr", "scr", "fs",
"audio_ref", "scr_ch3_unused",
"scr_ch4_unused", "scr_ch5_unused";
};
genpll_sw: genpll_sw@6501d0c4 {
#clock-cells = <1>;
compatible = "brcm,ns2-genpll-sw";
reg = <0x6501d0c4 0x32>,
<0x6501c020 0x4>,
<0x6501d044 0x4>;
clocks = <&osc>;
clock-output-names = "genpll_sw", "rpe", "250", "nic",
"chimp", "port", "sdio";
};
crmu: crmu@65024000 {
compatible = "syscon";
reg = <0x65024000 0x100>;
};
reboot@65024000 {
compatible ="syscon-reboot";
regmap = <&crmu>;
offset = <0x90>;
mask = <0xfffffffd>;
};
gic: interrupt-controller@65210000 { gic: interrupt-controller@65210000 {
compatible = "arm,gic-400"; compatible = "arm,gic-400";
#interrupt-cells = <3>; #interrupt-cells = <3>;
...@@ -105,14 +256,53 @@ gic: interrupt-controller@65210000 { ...@@ -105,14 +256,53 @@ gic: interrupt-controller@65210000 {
<0x65260000 0x1000>; <0x65260000 0x1000>;
}; };
i2c0: i2c@66080000 {
compatible = "brcm,iproc-i2c";
reg = <0x66080000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 394 IRQ_TYPE_NONE>;
clock-frequency = <100000>;
status = "disabled";
};
i2c1: i2c@660b0000 {
compatible = "brcm,iproc-i2c";
reg = <0x660b0000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 395 IRQ_TYPE_NONE>;
clock-frequency = <100000>;
status = "disabled";
};
uart3: serial@66130000 { uart3: serial@66130000 {
compatible = "snps,dw-apb-uart"; compatible = "snps,dw-apb-uart";
reg = <0x66130000 0x100>; reg = <0x66130000 0x100>;
interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>; reg-shift = <2>;
reg-io-width = <4>; reg-io-width = <4>;
clock-frequency = <23961600>; clocks = <&osc>;
status = "disabled"; status = "disabled";
}; };
hwrng: hwrng@66220000 {
compatible = "brcm,iproc-rng200";
reg = <0x66220000 0x28>;
};
nand: nand@66460000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x66460000 0x600>,
<0x67015408 0x600>,
<0x66460f00 0x20>;
reg-names = "nand", "iproc-idm", "iproc-ext";
interrupts = <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
brcm,nand-has-wp;
};
}; };
}; };
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment