Commit 8bd61f8d authored by Arend van Spriel's avatar Arend van Spriel Committed by Kalle Valo

brcmfmac: get rid of duplicate SDIO device identifiers

Instead of defining SDIO device identifier in brcm80211 code use
the defintions in linux/mmc/sdio_ids.h directly.
Reviewed-by: default avatarHante Meuleman <meuleman@broadcom.com>
Reviewed-by: default avatarPieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: default avatarArend van Spriel <arend@broadcom.com>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
parent 86f2db86
......@@ -996,20 +996,20 @@ static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev)
}
#define BRCMF_SDIO_DEVICE(dev_id) \
{SDIO_DEVICE(BRCM_SDIO_VENDOR_ID_BROADCOM, dev_id)}
{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, dev_id)}
/* devices we support, null terminated */
static const struct sdio_device_id brcmf_sdmmc_ids[] = {
BRCMF_SDIO_DEVICE(BRCM_SDIO_43143_DEVICE_ID),
BRCMF_SDIO_DEVICE(BRCM_SDIO_43241_DEVICE_ID),
BRCMF_SDIO_DEVICE(BRCM_SDIO_4329_DEVICE_ID),
BRCMF_SDIO_DEVICE(BRCM_SDIO_4330_DEVICE_ID),
BRCMF_SDIO_DEVICE(BRCM_SDIO_4334_DEVICE_ID),
BRCMF_SDIO_DEVICE(BRCM_SDIO_43340_DEVICE_ID),
BRCMF_SDIO_DEVICE(BRCM_SDIO_43341_DEVICE_ID),
BRCMF_SDIO_DEVICE(BRCM_SDIO_43362_DEVICE_ID),
BRCMF_SDIO_DEVICE(BRCM_SDIO_4335_4339_DEVICE_ID),
BRCMF_SDIO_DEVICE(BRCM_SDIO_4354_DEVICE_ID),
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43143),
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43241),
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4329),
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4330),
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4334),
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43340),
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43341),
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43362),
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4335_4339),
BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4354),
{ /* end: all zeroes */ }
};
MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids);
......
......@@ -3816,7 +3816,7 @@ static u32 brcmf_sdio_buscore_read32(void *ctx, u32 addr)
u32 val, rev;
val = brcmf_sdiod_regrl(sdiodev, addr, NULL);
if (sdiodev->func[0]->device == BRCM_SDIO_4335_4339_DEVICE_ID &&
if (sdiodev->func[0]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339 &&
addr == CORE_CC_REG(SI_ENUM_BASE, chipid)) {
rev = (val & CID_REV_MASK) >> CID_REV_SHIFT;
if (rev >= 2) {
......
......@@ -22,7 +22,6 @@
#define BRCM_USB_VENDOR_ID_BROADCOM 0x0a5c
#define BRCM_PCIE_VENDOR_ID_BROADCOM PCI_VENDOR_ID_BROADCOM
#define BRCM_SDIO_VENDOR_ID_BROADCOM SDIO_VENDOR_ID_BROADCOM
/* Chipcommon Core Chip IDs */
#define BRCM_CC_43143_CHIP_ID 43143
......@@ -46,18 +45,6 @@
#define BRCM_CC_43570_CHIP_ID 43570
#define BRCM_CC_43602_CHIP_ID 43602
/* SDIO Device IDs */
#define BRCM_SDIO_43143_DEVICE_ID BRCM_CC_43143_CHIP_ID
#define BRCM_SDIO_43241_DEVICE_ID BRCM_CC_43241_CHIP_ID
#define BRCM_SDIO_4329_DEVICE_ID BRCM_CC_4329_CHIP_ID
#define BRCM_SDIO_4330_DEVICE_ID BRCM_CC_4330_CHIP_ID
#define BRCM_SDIO_4334_DEVICE_ID BRCM_CC_4334_CHIP_ID
#define BRCM_SDIO_43340_DEVICE_ID BRCM_CC_43340_CHIP_ID
#define BRCM_SDIO_43341_DEVICE_ID 43341
#define BRCM_SDIO_43362_DEVICE_ID BRCM_CC_43362_CHIP_ID
#define BRCM_SDIO_4335_4339_DEVICE_ID BRCM_CC_4335_CHIP_ID
#define BRCM_SDIO_4354_DEVICE_ID BRCM_CC_4354_CHIP_ID
/* USB Device IDs */
#define BRCM_USB_43143_DEVICE_ID 0xbd1e
#define BRCM_USB_43236_DEVICE_ID 0xbd17
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment