Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
 "Bugfixes, mostly for ARM and AMD, and more documentation.

  Slightly bigger than usual because I couldn't send out what was
  pending for rc4, but there is nothing worrisome going on. I have more
  fixes pending for guest debugging support (gdbstub) but I will send
  them next week"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
  KVM: X86: Declare KVM_CAP_SET_GUEST_DEBUG properly
  KVM: selftests: Fix build for evmcs.h
  kvm: x86: Use KVM CPU capabilities to determine CR4 reserved bits
  KVM: VMX: Explicitly clear RFLAGS.CF and RFLAGS.ZF in VM-Exit RSB path
  docs/virt/kvm: Document configuring and running nested guests
  KVM: s390: Remove false WARN_ON_ONCE for the PQAP instruction
  kvm: ioapic: Restrict lazy EOI update to edge-triggered interrupts
  KVM: x86: Fixes posted interrupt check for IRQs delivery modes
  KVM: SVM: fill in kvm_run->debug.arch.dr[67]
  KVM: nVMX: Replace a BUG_ON(1) with BUG() to squash clang warning
  KVM: arm64: Fix 32bit PC wrap-around
  KVM: arm64: vgic-v4: Initialize GICv4.1 even in the absence of a virtual ITS
  KVM: arm64: Save/restore sp_el0 as part of __guest_enter
  KVM: arm64: Delete duplicated label in invalid_vector
  KVM: arm64: vgic-its: Fix memory leak on the error path of vgic_add_lpi()
  KVM: arm64: vgic-v3: Retire all pending LPIs on vcpu destroy
  KVM: arm: vgic-v2: Only use the virtual state when userspace accesses pending bits
  KVM: arm: vgic: Only use the virtual state when userspace accesses enable bits
  KVM: arm: vgic: Synchronize the whole guest on GIC{D,R}_I{S,C}ACTIVER read
  KVM: arm64: PSCI: Forbid 64bit functions for 32bit guests
  ...

Documentation/virt/kvm/index.rst

@@ -28,3 +28,5 @@ KVM
    arm/index
 
    devices/index
+
+   running-nested-guests

Documentation/virt/kvm/running-nested-guests.rst

+==============================
+Running nested guests with KVM
+==============================
+
+A nested guest is the ability to run a guest inside another guest (it
+can be KVM-based or a different hypervisor).  The straightforward
+example is a KVM guest that in turn runs on a KVM guest (the rest of
+this document is built on this example)::
+
+              .----------------.  .----------------.
+              |                |  |                |
+              |      L2        |  |      L2        |
+              | (Nested Guest) |  | (Nested Guest) |
+              |                |  |                |
+              |----------------'--'----------------|
+              |                                    |
+              |       L1 (Guest Hypervisor)        |
+              |          KVM (/dev/kvm)            |
+              |                                    |
+      .------------------------------------------------------.
+      |                 L0 (Host Hypervisor)                 |
+      |                    KVM (/dev/kvm)                    |
+      |------------------------------------------------------|
+      |        Hardware (with virtualization extensions)     |
+      '------------------------------------------------------'
+
+Terminology:
+
+- L0 – level-0; the bare metal host, running KVM
+
+- L1 – level-1 guest; a VM running on L0; also called the "guest
+  hypervisor", as it itself is capable of running KVM.
+
+- L2 – level-2 guest; a VM running on L1, this is the "nested guest"
+
+.. note:: The above diagram is modelled after the x86 architecture;
+          s390x, ppc64 and other architectures are likely to have
+          a different design for nesting.
+
+          For example, s390x always has an LPAR (LogicalPARtition)
+          hypervisor running on bare metal, adding another layer and
+          resulting in at least four levels in a nested setup — L0 (bare
+          metal, running the LPAR hypervisor), L1 (host hypervisor), L2
+          (guest hypervisor), L3 (nested guest).
+
+          This document will stick with the three-level terminology (L0,
+          L1, and L2) for all architectures; and will largely focus on
+          x86.
+
+
+Use Cases
+---------
+
+There are several scenarios where nested KVM can be useful, to name a
+few:
+
+- As a developer, you want to test your software on different operating
+  systems (OSes).  Instead of renting multiple VMs from a Cloud
+  Provider, using nested KVM lets you rent a large enough "guest
+  hypervisor" (level-1 guest).  This in turn allows you to create
+  multiple nested guests (level-2 guests), running different OSes, on
+  which you can develop and test your software.
+
+- Live migration of "guest hypervisors" and their nested guests, for
+  load balancing, disaster recovery, etc.
+
+- VM image creation tools (e.g. ``virt-install``,  etc) often run
+  their own VM, and users expect these to work inside a VM.
+
+- Some OSes use virtualization internally for security (e.g. to let
+  applications run safely in isolation).
+
+
+Enabling "nested" (x86)
+-----------------------
+
+From Linux kernel v4.19 onwards, the ``nested`` KVM parameter is enabled
+by default for Intel and AMD.  (Though your Linux distribution might
+override this default.)
+
+In case you are running a Linux kernel older than v4.19, to enable
+nesting, set the ``nested`` KVM module parameter to ``Y`` or ``1``.  To
+persist this setting across reboots, you can add it in a config file, as
+shown below:
+
+1. On the bare metal host (L0), list the kernel modules and ensure that
+   the KVM modules::
+
+    $ lsmod | grep -i kvm
+    kvm_intel             133627  0
+    kvm                   435079  1 kvm_intel
+
+2. Show information for ``kvm_intel`` module::
+
+    $ modinfo kvm_intel | grep -i nested
+    parm:           nested:bool
+
+3. For the nested KVM configuration to persist across reboots, place the
+   below in ``/etc/modprobed/kvm_intel.conf`` (create the file if it
+   doesn't exist)::
+
+    $ cat /etc/modprobe.d/kvm_intel.conf
+    options kvm-intel nested=y
+
+4. Unload and re-load the KVM Intel module::
+
+    $ sudo rmmod kvm-intel
+    $ sudo modprobe kvm-intel
+
+5. Verify if the ``nested`` parameter for KVM is enabled::
+
+    $ cat /sys/module/kvm_intel/parameters/nested
+    Y
+
+For AMD hosts, the process is the same as above, except that the module
+name is ``kvm-amd``.
+
+
+Additional nested-related kernel parameters (x86)
+-------------------------------------------------
+
+If your hardware is sufficiently advanced (Intel Haswell processor or
+higher, which has newer hardware virt extensions), the following
+additional features will also be enabled by default: "Shadow VMCS
+(Virtual Machine Control Structure)", APIC Virtualization on your bare
+metal host (L0).  Parameters for Intel hosts::
+
+    $ cat /sys/module/kvm_intel/parameters/enable_shadow_vmcs
+    Y
+
+    $ cat /sys/module/kvm_intel/parameters/enable_apicv
+    Y
+
+    $ cat /sys/module/kvm_intel/parameters/ept
+    Y
+
+.. note:: If you suspect your L2 (i.e. nested guest) is running slower,
+          ensure the above are enabled (particularly
+          ``enable_shadow_vmcs`` and ``ept``).
+
+
+Starting a nested guest (x86)
+-----------------------------
+
+Once your bare metal host (L0) is configured for nesting, you should be
+able to start an L1 guest with::
+
+    $ qemu-kvm -cpu host [...]
+
+The above will pass through the host CPU's capabilities as-is to the
+gues); or for better live migration compatibility, use a named CPU
+model supported by QEMU. e.g.::
+
+    $ qemu-kvm -cpu Haswell-noTSX-IBRS,vmx=on
+
+then the guest hypervisor will subsequently be capable of running a
+nested guest with accelerated KVM.
+
+
+Enabling "nested" (s390x)
+-------------------------
+
+1. On the host hypervisor (L0), enable the ``nested`` parameter on
+   s390x::
+
+    $ rmmod kvm
+    $ modprobe kvm nested=1
+
+.. note:: On s390x, the kernel parameter ``hpage`` is mutually exclusive
+          with the ``nested`` paramter — i.e. to be able to enable
+          ``nested``, the ``hpage`` parameter *must* be disabled.
+
+2. The guest hypervisor (L1) must be provided with the ``sie`` CPU
+   feature — with QEMU, this can be done by using "host passthrough"
+   (via the command-line ``-cpu host``).
+
+3. Now the KVM module can be loaded in the L1 (guest hypervisor)::
+
+    $ modprobe kvm
+
+
+Live migration with nested KVM
+------------------------------
+
+Migrating an L1 guest, with a  *live* nested guest in it, to another
+bare metal host, works as of Linux kernel 5.3 and QEMU 4.2.0 for
+Intel x86 systems, and even on older versions for s390x.
+
+On AMD systems, once an L1 guest has started an L2 guest, the L1 guest
+should no longer be migrated or saved (refer to QEMU documentation on
+"savevm"/"loadvm") until the L2 guest shuts down.  Attempting to migrate
+or save-and-load an L1 guest while an L2 guest is running will result in
+undefined behavior.  You might see a ``kernel BUG!`` entry in ``dmesg``, a
+kernel 'oops', or an outright kernel panic.  Such a migrated or loaded L1
+guest can no longer be considered stable or secure, and must be restarted.
+Migrating an L1 guest merely configured to support nesting, while not
+actually running L2 guests, is expected to function normally even on AMD
+systems but may fail once guests are started.
+
+Migrating an L2 guest is always expected to succeed, so all the following
+scenarios should work even on AMD systems:
+
+- Migrating a nested guest (L2) to another L1 guest on the *same* bare
+  metal host.
+
+- Migrating a nested guest (L2) to another L1 guest on a *different*
+  bare metal host.
+
+- Migrating a nested guest (L2) to a bare metal host.
+
+Reporting bugs from nested setups
+-----------------------------------
+
+Debugging "nested" problems can involve sifting through log files across
+L0, L1 and L2; this can result in tedious back-n-forth between the bug
+reporter and the bug fixer.
+
+- Mention that you are in a "nested" setup.  If you are running any kind
+  of "nesting" at all, say so.  Unfortunately, this needs to be called
+  out because when reporting bugs, people tend to forget to even
+  *mention* that they're using nested virtualization.
+
+- Ensure you are actually running KVM on KVM.  Sometimes people do not
+  have KVM enabled for their guest hypervisor (L1), which results in
+  them running with pure emulation or what QEMU calls it as "TCG", but
+  they think they're running nested KVM.  Thus confusing "nested Virt"
+  (which could also mean, QEMU on KVM) with "nested KVM" (KVM on KVM).
+
+Information to collect (generic)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The following is not an exhaustive list, but a very good starting point:
+
+  - Kernel, libvirt, and QEMU version from L0
+
+  - Kernel, libvirt and QEMU version from L1
+
+  - QEMU command-line of L1 -- when using libvirt, you'll find it here:
+    ``/var/log/libvirt/qemu/instance.log``
+
+  - QEMU command-line of L2 -- as above, when using libvirt, get the
+    complete libvirt-generated QEMU command-line
+
+  - ``cat /sys/cpuinfo`` from L0
+
+  - ``cat /sys/cpuinfo`` from L1
+
+  - ``lscpu`` from L0
+
+  - ``lscpu`` from L1
+
+  - Full ``dmesg`` output from L0
+
+  - Full ``dmesg`` output from L1
+
+x86-specific info to collect
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Both the below commands, ``x86info`` and ``dmidecode``, should be
+available on most Linux distributions with the same name:
+
+  - Output of: ``x86info -a`` from L0
+
+  - Output of: ``x86info -a`` from L1
+
+  - Output of: ``dmidecode`` from L0
+
+  - Output of: ``dmidecode`` from L1
+
+s390x-specific info to collect
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Along with the earlier mentioned generic details, the below is
+also recommended:
+
+  - ``/proc/sysinfo`` from L1; this will also include the info from L0

arch/arm64/kvm/guest.c

@@ -200,6 +200,13 @@ static int set_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 	}
 
 	memcpy((u32 *)regs + off, valp, KVM_REG_SIZE(reg->id));
+
+	if (*vcpu_cpsr(vcpu) & PSR_MODE32_BIT) {
+		int i;
+
+		for (i = 0; i < 16; i++)
+			*vcpu_reg32(vcpu, i) = (u32)*vcpu_reg32(vcpu, i);
+	}
 out:
 	return err;
 }

arch/arm64/kvm/hyp/entry.S

@@ -18,6 +18,7 @@
 
 #define CPU_GP_REG_OFFSET(x)	(CPU_GP_REGS + x)
 #define CPU_XREG_OFFSET(x)	CPU_GP_REG_OFFSET(CPU_USER_PT_REGS + 8*x)
+#define CPU_SP_EL0_OFFSET	(CPU_XREG_OFFSET(30) + 8)
 
 	.text
 	.pushsection	.hyp.text, "ax"
@@ -47,6 +48,16 @@
 	ldp	x29, lr,  [\ctxt, #CPU_XREG_OFFSET(29)]
 .endm
 
+.macro save_sp_el0 ctxt, tmp
+	mrs	\tmp,	sp_el0
+	str	\tmp,	[\ctxt, #CPU_SP_EL0_OFFSET]
+.endm
+
+.macro restore_sp_el0 ctxt, tmp
+	ldr	\tmp,	  [\ctxt, #CPU_SP_EL0_OFFSET]
+	msr	sp_el0, \tmp
+.endm
+
 /*
  * u64 __guest_enter(struct kvm_vcpu *vcpu,
  *		     struct kvm_cpu_context *host_ctxt);
@@ -60,6 +71,9 @@ SYM_FUNC_START(__guest_enter)
 	// Store the host regs
 	save_callee_saved_regs x1
 
+	// Save the host's sp_el0
+	save_sp_el0	x1, x2
+
 	// Now the host state is stored if we have a pending RAS SError it must
 	// affect the host. If any asynchronous exception is pending we defer
 	// the guest entry. The DSB isn't necessary before v8.2 as any SError
@@ -83,6 +97,9 @@ alternative_else_nop_endif
 	// when this feature is enabled for kernel code.
 	ptrauth_switch_to_guest x29, x0, x1, x2
 
+	// Restore the guest's sp_el0
+	restore_sp_el0 x29, x0
+
 	// Restore guest regs x0-x17
 	ldp	x0, x1,   [x29, #CPU_XREG_OFFSET(0)]
 	ldp	x2, x3,   [x29, #CPU_XREG_OFFSET(2)]
@@ -130,6 +147,9 @@ SYM_INNER_LABEL(__guest_exit, SYM_L_GLOBAL)
 	// Store the guest regs x18-x29, lr
 	save_callee_saved_regs x1
 
+	// Store the guest's sp_el0
+	save_sp_el0	x1, x2
+
 	get_host_ctxt	x2, x3
 
 	// Macro ptrauth_switch_to_guest format:
@@ -139,6 +159,9 @@ SYM_INNER_LABEL(__guest_exit, SYM_L_GLOBAL)
 	// when this feature is enabled for kernel code.
 	ptrauth_switch_to_host x1, x2, x3, x4, x5
 
+	// Restore the hosts's sp_el0
+	restore_sp_el0 x2, x3
+
 	// Now restore the host regs
 	restore_callee_saved_regs x2
 

arch/arm64/kvm/hyp/hyp-entry.S

@@ -198,7 +198,6 @@ SYM_CODE_END(__hyp_panic)
 .macro invalid_vector	label, target = __hyp_panic
 	.align	2
 SYM_CODE_START(\label)
-\label:
 	b \target
 SYM_CODE_END(\label)
 .endm

arch/arm64/kvm/hyp/sysreg-sr.c

@@ -15,8 +15,9 @@
 /*
  * Non-VHE: Both host and guest must save everything.
  *
- * VHE: Host and guest must save mdscr_el1 and sp_el0 (and the PC and pstate,
- * which are handled as part of the el2 return state) on every switch.
+ * VHE: Host and guest must save mdscr_el1 and sp_el0 (and the PC and
+ * pstate, which are handled as part of the el2 return state) on every
+ * switch (sp_el0 is being dealt with in the assembly code).
  * tpidr_el0 and tpidrro_el0 only need to be switched when going
  * to host userspace or a different VCPU.  EL1 registers only need to be
  * switched when potentially going to run a different VCPU.  The latter two
@@ -26,12 +27,6 @@
 static void __hyp_text __sysreg_save_common_state(struct kvm_cpu_context *ctxt)
 {
 	ctxt->sys_regs[MDSCR_EL1]	= read_sysreg(mdscr_el1);
-
-	/*
-	 * The host arm64 Linux uses sp_el0 to point to 'current' and it must
-	 * therefore be saved/restored on every entry/exit to/from the guest.
-	 */
-	ctxt->gp_regs.regs.sp		= read_sysreg(sp_el0);
 }
 
 static void __hyp_text __sysreg_save_user_state(struct kvm_cpu_context *ctxt)
@@ -99,12 +94,6 @@ NOKPROBE_SYMBOL(sysreg_save_guest_state_vhe);
 static void __hyp_text __sysreg_restore_common_state(struct kvm_cpu_context *ctxt)
 {
 	write_sysreg(ctxt->sys_regs[MDSCR_EL1],	  mdscr_el1);
-
-	/*
-	 * The host arm64 Linux uses sp_el0 to point to 'current' and it must
-	 * therefore be saved/restored on every entry/exit to/from the guest.
-	 */
-	write_sysreg(ctxt->gp_regs.regs.sp,	  sp_el0);
 }
 
 static void __hyp_text __sysreg_restore_user_state(struct kvm_cpu_context *ctxt)

arch/powerpc/kvm/powerpc.c

@@ -521,6 +521,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 	case KVM_CAP_IOEVENTFD:
 	case KVM_CAP_DEVICE_CTRL:
 	case KVM_CAP_IMMEDIATE_EXIT:
+	case KVM_CAP_SET_GUEST_DEBUG:
 		r = 1;
 		break;
 	case KVM_CAP_PPC_GUEST_DEBUG_SSTEP:

arch/s390/kvm/kvm-s390.c

@@ -545,6 +545,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 	case KVM_CAP_S390_AIS:
 	case KVM_CAP_S390_AIS_MIGRATION:
 	case KVM_CAP_S390_VCPU_RESETS:
+	case KVM_CAP_SET_GUEST_DEBUG:
 		r = 1;
 		break;
 	case KVM_CAP_S390_HPAGE_1M:

arch/s390/kvm/priv.c

@@ -626,10 +626,12 @@ static int handle_pqap(struct kvm_vcpu *vcpu)
 	 * available for the guest are AQIC and TAPQ with the t bit set
 	 * since we do not set IC.3 (FIII) we currently will only intercept
 	 * the AQIC function code.
+	 * Note: running nested under z/VM can result in intercepts for other
+	 * function codes, e.g. PQAP(QCI). We do not support this and bail out.
 	 */
 	reg0 = vcpu->run->s.regs.gprs[0];
 	fc = (reg0 >> 24) & 0xff;
-	if (WARN_ON_ONCE(fc != 0x03))
+	if (fc != 0x03)
 		return -EOPNOTSUPP;
 
 	/* PQAP instruction is allowed for guest kernel only */

arch/x86/include/asm/kvm_host.h

@@ -1663,8 +1663,8 @@ void kvm_set_msi_irq(struct kvm *kvm, struct kvm_kernel_irq_routing_entry *e,
 static inline bool kvm_irq_is_postable(struct kvm_lapic_irq *irq)
 {
 	/* We can only post Fixed and LowPrio IRQs */
-	return (irq->delivery_mode == dest_Fixed ||
-		irq->delivery_mode == dest_LowestPrio);
+	return (irq->delivery_mode == APIC_DM_FIXED ||
+		irq->delivery_mode == APIC_DM_LOWEST);
 }
 
 static inline void kvm_arch_vcpu_blocking(struct kvm_vcpu *vcpu)

arch/x86/kvm/ioapic.c

@@ -225,12 +225,12 @@ static int ioapic_set_irq(struct kvm_ioapic *ioapic, unsigned int irq,
 	}
 
 	/*
-	 * AMD SVM AVIC accelerate EOI write and do not trap,
-	 * in-kernel IOAPIC will not be able to receive the EOI.
-	 * In this case, we do lazy update of the pending EOI when
-	 * trying to set IOAPIC irq.
+	 * AMD SVM AVIC accelerate EOI write iff the interrupt is edge
+	 * triggered, in which case the in-kernel IOAPIC will not be able
+	 * to receive the EOI.  In this case, we do a lazy update of the
+	 * pending EOI when trying to set IOAPIC irq.
 	 */
-	if (kvm_apicv_activated(ioapic->kvm))
+	if (edge && kvm_apicv_activated(ioapic->kvm))
 		ioapic_lazy_update_eoi(ioapic, irq);
 
 	/*

arch/x86/kvm/svm/svm.c

@@ -1752,6 +1752,8 @@ static int db_interception(struct vcpu_svm *svm)
 	if (svm->vcpu.guest_debug &
 	    (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP)) {
 		kvm_run->exit_reason = KVM_EXIT_DEBUG;
+		kvm_run->debug.arch.dr6 = svm->vmcb->save.dr6;
+		kvm_run->debug.arch.dr7 = svm->vmcb->save.dr7;
 		kvm_run->debug.arch.pc =
 			svm->vmcb->save.cs.base + svm->vmcb->save.rip;
 		kvm_run->debug.arch.exception = DB_VECTOR;

arch/x86/kvm/vmx/nested.c

@@ -5165,7 +5165,7 @@ static int handle_invept(struct kvm_vcpu *vcpu)
 	 */
 		break;
 	default:
-		BUG_ON(1);
+		BUG();
 		break;
 	}
 

arch/x86/kvm/vmx/vmenter.S

@@ -82,6 +82,9 @@ SYM_FUNC_START(vmx_vmexit)
 	/* IMPORTANT: Stuff the RSB immediately after VM-Exit, before RET! */
 	FILL_RETURN_BUFFER %_ASM_AX, RSB_CLEAR_LOOPS, X86_FEATURE_RETPOLINE
 
+	/* Clear RFLAGS.CF and RFLAGS.ZF to preserve VM-Exit, i.e. !VM-Fail. */
+	or $1, %_ASM_AX
+
 	pop %_ASM_AX
 .Lvmexit_skip_rsb:
 #endif

arch/x86/kvm/x86.c

@@ -926,19 +926,6 @@ EXPORT_SYMBOL_GPL(kvm_set_xcr);
 	__reserved_bits;				\
 })
 
-static u64 kvm_host_cr4_reserved_bits(struct cpuinfo_x86 *c)
-{
-	u64 reserved_bits = __cr4_reserved_bits(cpu_has, c);
-
-	if (kvm_cpu_cap_has(X86_FEATURE_LA57))
-		reserved_bits &= ~X86_CR4_LA57;
-
-	if (kvm_cpu_cap_has(X86_FEATURE_UMIP))
-		reserved_bits &= ~X86_CR4_UMIP;
-
-	return reserved_bits;
-}
-
 static int kvm_valid_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 {
 	if (cr4 & cr4_reserved_bits)
@@ -3385,6 +3372,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 	case KVM_CAP_GET_MSR_FEATURES:
 	case KVM_CAP_MSR_PLATFORM_INFO:
 	case KVM_CAP_EXCEPTION_PAYLOAD:
+	case KVM_CAP_SET_GUEST_DEBUG:
 		r = 1;
 		break;
 	case KVM_CAP_SYNC_REGS:
@@ -9675,7 +9663,9 @@ int kvm_arch_hardware_setup(void *opaque)
 	if (!kvm_cpu_cap_has(X86_FEATURE_XSAVES))
 		supported_xss = 0;
 
-	cr4_reserved_bits = kvm_host_cr4_reserved_bits(&boot_cpu_data);
+#define __kvm_cpu_cap_has(UNUSED_, f) kvm_cpu_cap_has(f)
+	cr4_reserved_bits = __cr4_reserved_bits(__kvm_cpu_cap_has, UNUSED_);
+#undef __kvm_cpu_cap_has
 
 	if (kvm_has_tsc_control) {
 		/*
@@ -9707,7 +9697,8 @@ int kvm_arch_check_processor_compat(void *opaque)
 
 	WARN_ON(!irqs_disabled());
 
-	if (kvm_host_cr4_reserved_bits(c) != cr4_reserved_bits)
+	if (__cr4_reserved_bits(cpu_has, c) !=
+	    __cr4_reserved_bits(cpu_has, &boot_cpu_data))
 		return -EIO;
 
 	return ops->check_processor_compatibility();

tools/testing/selftests/kvm/include/evmcs.h

@@ -219,8 +219,8 @@ struct hv_enlightened_vmcs {
 #define HV_X64_MSR_VP_ASSIST_PAGE_ADDRESS_MASK	\
 		(~((1ull << HV_X64_MSR_VP_ASSIST_PAGE_ADDRESS_SHIFT) - 1))
 
-struct hv_enlightened_vmcs *current_evmcs;
-struct hv_vp_assist_page *current_vp_assist;
+extern struct hv_enlightened_vmcs *current_evmcs;
+extern struct hv_vp_assist_page *current_vp_assist;
 
 int vcpu_enable_evmcs(struct kvm_vm *vm, int vcpu_id);
 

tools/testing/selftests/kvm/lib/x86_64/vmx.c

@@ -17,6 +17,9 @@
 
 bool enable_evmcs;
 
+struct hv_enlightened_vmcs *current_evmcs;
+struct hv_vp_assist_page *current_vp_assist;
+
 struct eptPageTableEntry {
 	uint64_t readable:1;
 	uint64_t writable:1;

virt/kvm/arm/hyp/aarch32.c

@@ -125,12 +125,16 @@ static void __hyp_text kvm_adjust_itstate(struct kvm_vcpu *vcpu)
  */
 void __hyp_text kvm_skip_instr32(struct kvm_vcpu *vcpu, bool is_wide_instr)
 {
+	u32 pc = *vcpu_pc(vcpu);
 	bool is_thumb;
 
 	is_thumb = !!(*vcpu_cpsr(vcpu) & PSR_AA32_T_BIT);
 	if (is_thumb && !is_wide_instr)
-		*vcpu_pc(vcpu) += 2;
+		pc += 2;
 	else
-		*vcpu_pc(vcpu) += 4;
+		pc += 4;
+
+	*vcpu_pc(vcpu) = pc;
+
 	kvm_adjust_itstate(vcpu);
 }

virt/kvm/arm/psci.c

@@ -186,6 +186,33 @@ static void kvm_psci_system_reset(struct kvm_vcpu *vcpu)
 	kvm_prepare_system_event(vcpu, KVM_SYSTEM_EVENT_RESET);
 }
 
+static void kvm_psci_narrow_to_32bit(struct kvm_vcpu *vcpu)
+{
+	int i;
+
+	/*
+	 * Zero the input registers' upper 32 bits. They will be fully
+	 * zeroed on exit, so we're fine changing them in place.
+	 */
+	for (i = 1; i < 4; i++)
+		vcpu_set_reg(vcpu, i, lower_32_bits(vcpu_get_reg(vcpu, i)));
+}
+
+static unsigned long kvm_psci_check_allowed_function(struct kvm_vcpu *vcpu, u32 fn)
+{
+	switch(fn) {
+	case PSCI_0_2_FN64_CPU_SUSPEND:
+	case PSCI_0_2_FN64_CPU_ON:
+	case PSCI_0_2_FN64_AFFINITY_INFO:
+		/* Disallow these functions for 32bit guests */
+		if (vcpu_mode_is_32bit(vcpu))
+			return PSCI_RET_NOT_SUPPORTED;
+		break;
+	}
+
+	return 0;
+}
+
 static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu)
 {
 	struct kvm *kvm = vcpu->kvm;
@@ -193,6 +220,10 @@ static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu)
 	unsigned long val;
 	int ret = 1;
 
+	val = kvm_psci_check_allowed_function(vcpu, psci_fn);
+	if (val)
+		goto out;
+
 	switch (psci_fn) {
 	case PSCI_0_2_FN_PSCI_VERSION:
 		/*
@@ -210,12 +241,16 @@ static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu)
 		val = PSCI_RET_SUCCESS;
 		break;
 	case PSCI_0_2_FN_CPU_ON:
+		kvm_psci_narrow_to_32bit(vcpu);
+		fallthrough;
 	case PSCI_0_2_FN64_CPU_ON:
 		mutex_lock(&kvm->lock);
 		val = kvm_psci_vcpu_on(vcpu);
 		mutex_unlock(&kvm->lock);
 		break;
 	case PSCI_0_2_FN_AFFINITY_INFO:
+		kvm_psci_narrow_to_32bit(vcpu);
+		fallthrough;
 	case PSCI_0_2_FN64_AFFINITY_INFO:
 		val = kvm_psci_vcpu_affinity_info(vcpu);
 		break;
@@ -256,6 +291,7 @@ static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu)
 		break;
 	}
 
+out:
 	smccc_set_retval(vcpu, val, 0, 0, 0);
 	return ret;
 }
@@ -273,6 +309,10 @@ static int kvm_psci_1_0_call(struct kvm_vcpu *vcpu)
 		break;
 	case PSCI_1_0_FN_PSCI_FEATURES:
 		feature = smccc_get_arg1(vcpu);
+		val = kvm_psci_check_allowed_function(vcpu, feature);
+		if (val)
+			break;
+
 		switch(feature) {
 		case PSCI_0_2_FN_PSCI_VERSION:
 		case PSCI_0_2_FN_CPU_SUSPEND:

virt/kvm/arm/vgic/vgic-init.c

@@ -294,8 +294,15 @@ int vgic_init(struct kvm *kvm)
 		}
 	}
 
-	if (vgic_has_its(kvm)) {
+	if (vgic_has_its(kvm))
 		vgic_lpi_translation_cache_init(kvm);
+
+	/*
+	 * If we have GICv4.1 enabled, unconditionnaly request enable the
+	 * v4 support so that we get HW-accelerated vSGIs. Otherwise, only
+	 * enable it if we present a virtual ITS to the guest.
+	 */
+	if (vgic_supports_direct_msis(kvm)) {
 		ret = vgic_v4_init(kvm);
 		if (ret)
 			goto out;
@@ -348,6 +355,12 @@ void kvm_vgic_vcpu_destroy(struct kvm_vcpu *vcpu)
 {
 	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
 
+	/*
+	 * Retire all pending LPIs on this vcpu anyway as we're
+	 * going to destroy it.
+	 */
+	vgic_flush_pending_lpis(vcpu);
+
 	INIT_LIST_HEAD(&vgic_cpu->ap_list_head);
 }
 
@@ -359,10 +372,10 @@ static void __kvm_vgic_destroy(struct kvm *kvm)
 
 	vgic_debug_destroy(kvm);
 
-	kvm_vgic_dist_destroy(kvm);
-
 	kvm_for_each_vcpu(i, vcpu, kvm)
 		kvm_vgic_vcpu_destroy(vcpu);
+
+	kvm_vgic_dist_destroy(kvm);
 }
 
 void kvm_vgic_destroy(struct kvm *kvm)

virt/kvm/arm/vgic/vgic-its.c

@@ -96,14 +96,21 @@ static struct vgic_irq *vgic_add_lpi(struct kvm *kvm, u32 intid,
 	 * We "cache" the configuration table entries in our struct vgic_irq's.
 	 * However we only have those structs for mapped IRQs, so we read in
 	 * the respective config data from memory here upon mapping the LPI.
+	 *
+	 * Should any of these fail, behave as if we couldn't create the LPI
+	 * by dropping the refcount and returning the error.
 	 */
 	ret = update_lpi_config(kvm, irq, NULL, false);
-	if (ret)
+	if (ret) {
+		vgic_put_irq(kvm, irq);
 		return ERR_PTR(ret);
+	}
 
 	ret = vgic_v3_lpi_sync_pending_status(kvm, irq);
-	if (ret)
+	if (ret) {
+		vgic_put_irq(kvm, irq);
 		return ERR_PTR(ret);
+	}
 
 	return irq;
 }

virt/kvm/arm/vgic/vgic-mmio-v2.c

@@ -409,24 +409,28 @@ static const struct vgic_register_region vgic_v2_dist_registers[] = {
 		NULL, vgic_mmio_uaccess_write_v2_group, 1,
 		VGIC_ACCESS_32bit),
 	REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_ENABLE_SET,
-		vgic_mmio_read_enable, vgic_mmio_write_senable, NULL, NULL, 1,
+		vgic_mmio_read_enable, vgic_mmio_write_senable,
+		NULL, vgic_uaccess_write_senable, 1,
 		VGIC_ACCESS_32bit),
 	REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_ENABLE_CLEAR,
-		vgic_mmio_read_enable, vgic_mmio_write_cenable, NULL, NULL, 1,
+		vgic_mmio_read_enable, vgic_mmio_write_cenable,
+		NULL, vgic_uaccess_write_cenable, 1,
 		VGIC_ACCESS_32bit),
 	REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_PENDING_SET,
-		vgic_mmio_read_pending, vgic_mmio_write_spending, NULL, NULL, 1,
+		vgic_mmio_read_pending, vgic_mmio_write_spending,
+		NULL, vgic_uaccess_write_spending, 1,
 		VGIC_ACCESS_32bit),
 	REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_PENDING_CLEAR,
-		vgic_mmio_read_pending, vgic_mmio_write_cpending, NULL, NULL, 1,
+		vgic_mmio_read_pending, vgic_mmio_write_cpending,
+		NULL, vgic_uaccess_write_cpending, 1,
 		VGIC_ACCESS_32bit),
 	REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_ACTIVE_SET,
 		vgic_mmio_read_active, vgic_mmio_write_sactive,
-		NULL, vgic_mmio_uaccess_write_sactive, 1,
+		vgic_uaccess_read_active, vgic_mmio_uaccess_write_sactive, 1,
 		VGIC_ACCESS_32bit),
 	REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_ACTIVE_CLEAR,
 		vgic_mmio_read_active, vgic_mmio_write_cactive,
-		NULL, vgic_mmio_uaccess_write_cactive, 1,
+		vgic_uaccess_read_active, vgic_mmio_uaccess_write_cactive, 1,
 		VGIC_ACCESS_32bit),
 	REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_PRI,
 		vgic_mmio_read_priority, vgic_mmio_write_priority, NULL, NULL,

virt/kvm/arm/vgic/vgic-mmio-v3.c

@@ -50,7 +50,8 @@ bool vgic_has_its(struct kvm *kvm)
 
 bool vgic_supports_direct_msis(struct kvm *kvm)
 {
-	return kvm_vgic_global_state.has_gicv4 && vgic_has_its(kvm);
+	return (kvm_vgic_global_state.has_gicv4_1 ||
+		(kvm_vgic_global_state.has_gicv4 && vgic_has_its(kvm)));
 }
 
 /*
@@ -538,10 +539,12 @@ static const struct vgic_register_region vgic_v3_dist_registers[] = {
 		vgic_mmio_read_group, vgic_mmio_write_group, NULL, NULL, 1,
 		VGIC_ACCESS_32bit),
 	REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_ISENABLER,
-		vgic_mmio_read_enable, vgic_mmio_write_senable, NULL, NULL, 1,
+		vgic_mmio_read_enable, vgic_mmio_write_senable,
+		NULL, vgic_uaccess_write_senable, 1,
 		VGIC_ACCESS_32bit),
 	REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_ICENABLER,
-		vgic_mmio_read_enable, vgic_mmio_write_cenable, NULL, NULL, 1,
+		vgic_mmio_read_enable, vgic_mmio_write_cenable,
+	       NULL, vgic_uaccess_write_cenable, 1,
 		VGIC_ACCESS_32bit),
 	REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_ISPENDR,
 		vgic_mmio_read_pending, vgic_mmio_write_spending,
@@ -553,11 +556,11 @@ static const struct vgic_register_region vgic_v3_dist_registers[] = {
 		VGIC_ACCESS_32bit),
 	REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_ISACTIVER,
 		vgic_mmio_read_active, vgic_mmio_write_sactive,
-		NULL, vgic_mmio_uaccess_write_sactive, 1,
+		vgic_uaccess_read_active, vgic_mmio_uaccess_write_sactive, 1,
 		VGIC_ACCESS_32bit),
 	REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_ICACTIVER,
 		vgic_mmio_read_active, vgic_mmio_write_cactive,
-		NULL, vgic_mmio_uaccess_write_cactive,
+		vgic_uaccess_read_active, vgic_mmio_uaccess_write_cactive,
 		1, VGIC_ACCESS_32bit),
 	REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_IPRIORITYR,
 		vgic_mmio_read_priority, vgic_mmio_write_priority, NULL, NULL,
@@ -609,11 +612,13 @@ static const struct vgic_register_region vgic_v3_rd_registers[] = {
 	REGISTER_DESC_WITH_LENGTH(SZ_64K + GICR_IGROUPR0,
 		vgic_mmio_read_group, vgic_mmio_write_group, 4,
 		VGIC_ACCESS_32bit),
-	REGISTER_DESC_WITH_LENGTH(SZ_64K + GICR_ISENABLER0,
-		vgic_mmio_read_enable, vgic_mmio_write_senable, 4,
+	REGISTER_DESC_WITH_LENGTH_UACCESS(SZ_64K + GICR_ISENABLER0,
+		vgic_mmio_read_enable, vgic_mmio_write_senable,
+		NULL, vgic_uaccess_write_senable, 4,
 		VGIC_ACCESS_32bit),
-	REGISTER_DESC_WITH_LENGTH(SZ_64K + GICR_ICENABLER0,
-		vgic_mmio_read_enable, vgic_mmio_write_cenable, 4,
+	REGISTER_DESC_WITH_LENGTH_UACCESS(SZ_64K + GICR_ICENABLER0,
+		vgic_mmio_read_enable, vgic_mmio_write_cenable,
+		NULL, vgic_uaccess_write_cenable, 4,
 		VGIC_ACCESS_32bit),
 	REGISTER_DESC_WITH_LENGTH_UACCESS(SZ_64K + GICR_ISPENDR0,
 		vgic_mmio_read_pending, vgic_mmio_write_spending,
@@ -625,12 +630,12 @@ static const struct vgic_register_region vgic_v3_rd_registers[] = {
 		VGIC_ACCESS_32bit),
 	REGISTER_DESC_WITH_LENGTH_UACCESS(SZ_64K + GICR_ISACTIVER0,
 		vgic_mmio_read_active, vgic_mmio_write_sactive,
-		NULL, vgic_mmio_uaccess_write_sactive,
-		4, VGIC_ACCESS_32bit),
+		vgic_uaccess_read_active, vgic_mmio_uaccess_write_sactive, 4,
+		VGIC_ACCESS_32bit),
 	REGISTER_DESC_WITH_LENGTH_UACCESS(SZ_64K + GICR_ICACTIVER0,
 		vgic_mmio_read_active, vgic_mmio_write_cactive,
-		NULL, vgic_mmio_uaccess_write_cactive,
-		4, VGIC_ACCESS_32bit),
+		vgic_uaccess_read_active, vgic_mmio_uaccess_write_cactive, 4,
+		VGIC_ACCESS_32bit),
 	REGISTER_DESC_WITH_LENGTH(SZ_64K + GICR_IPRIORITYR0,
 		vgic_mmio_read_priority, vgic_mmio_write_priority, 32,
 		VGIC_ACCESS_32bit | VGIC_ACCESS_8bit),

virt/kvm/arm/vgic/vgic-mmio.c

@@ -184,6 +184,48 @@ void vgic_mmio_write_cenable(struct kvm_vcpu *vcpu,
 	}
 }
 
+int vgic_uaccess_write_senable(struct kvm_vcpu *vcpu,
+			       gpa_t addr, unsigned int len,
+			       unsigned long val)
+{
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
+	int i;
+	unsigned long flags;
+
+	for_each_set_bit(i, &val, len * 8) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+		raw_spin_lock_irqsave(&irq->irq_lock, flags);
+		irq->enabled = true;
+		vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
+
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+
+	return 0;
+}
+
+int vgic_uaccess_write_cenable(struct kvm_vcpu *vcpu,
+			       gpa_t addr, unsigned int len,
+			       unsigned long val)
+{
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
+	int i;
+	unsigned long flags;
+
+	for_each_set_bit(i, &val, len * 8) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+		raw_spin_lock_irqsave(&irq->irq_lock, flags);
+		irq->enabled = false;
+		raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+
+	return 0;
+}
+
 unsigned long vgic_mmio_read_pending(struct kvm_vcpu *vcpu,
 				     gpa_t addr, unsigned int len)
 {
@@ -219,17 +261,6 @@ unsigned long vgic_mmio_read_pending(struct kvm_vcpu *vcpu,
 	return value;
 }
 
-/* Must be called with irq->irq_lock held */
-static void vgic_hw_irq_spending(struct kvm_vcpu *vcpu, struct vgic_irq *irq,
-				 bool is_uaccess)
-{
-	if (is_uaccess)
-		return;
-
-	irq->pending_latch = true;
-	vgic_irq_set_phys_active(irq, true);
-}
-
 static bool is_vgic_v2_sgi(struct kvm_vcpu *vcpu, struct vgic_irq *irq)
 {
 	return (vgic_irq_is_sgi(irq->intid) &&
@@ -240,7 +271,6 @@ void vgic_mmio_write_spending(struct kvm_vcpu *vcpu,
 			      gpa_t addr, unsigned int len,
 			      unsigned long val)
 {
-	bool is_uaccess = !kvm_get_running_vcpu();
 	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
 	int i;
 	unsigned long flags;
@@ -270,22 +300,48 @@ void vgic_mmio_write_spending(struct kvm_vcpu *vcpu,
 			continue;
 		}
 
+		irq->pending_latch = true;
 		if (irq->hw)
-			vgic_hw_irq_spending(vcpu, irq, is_uaccess);
-		else
-			irq->pending_latch = true;
+			vgic_irq_set_phys_active(irq, true);
+
 		vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
 		vgic_put_irq(vcpu->kvm, irq);
 	}
 }
 
-/* Must be called with irq->irq_lock held */
-static void vgic_hw_irq_cpending(struct kvm_vcpu *vcpu, struct vgic_irq *irq,
-				 bool is_uaccess)
+int vgic_uaccess_write_spending(struct kvm_vcpu *vcpu,
+				gpa_t addr, unsigned int len,
+				unsigned long val)
 {
-	if (is_uaccess)
-		return;
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
+	int i;
+	unsigned long flags;
+
+	for_each_set_bit(i, &val, len * 8) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+		raw_spin_lock_irqsave(&irq->irq_lock, flags);
+		irq->pending_latch = true;
 
+		/*
+		 * GICv2 SGIs are terribly broken. We can't restore
+		 * the source of the interrupt, so just pick the vcpu
+		 * itself as the source...
+		 */
+		if (is_vgic_v2_sgi(vcpu, irq))
+			irq->source |= BIT(vcpu->vcpu_id);
+
+		vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
+
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+
+	return 0;
+}
+
+/* Must be called with irq->irq_lock held */
+static void vgic_hw_irq_cpending(struct kvm_vcpu *vcpu, struct vgic_irq *irq)
+{
 	irq->pending_latch = false;
 
 	/*
@@ -308,7 +364,6 @@ void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu,
 			      gpa_t addr, unsigned int len,
 			      unsigned long val)
 {
-	bool is_uaccess = !kvm_get_running_vcpu();
 	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
 	int i;
 	unsigned long flags;
@@ -339,7 +394,7 @@ void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu,
 		}
 
 		if (irq->hw)
-			vgic_hw_irq_cpending(vcpu, irq, is_uaccess);
+			vgic_hw_irq_cpending(vcpu, irq);
 		else
 			irq->pending_latch = false;
 
@@ -348,8 +403,68 @@ void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu,
 	}
 }
 
-unsigned long vgic_mmio_read_active(struct kvm_vcpu *vcpu,
-				    gpa_t addr, unsigned int len)
+int vgic_uaccess_write_cpending(struct kvm_vcpu *vcpu,
+				gpa_t addr, unsigned int len,
+				unsigned long val)
+{
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
+	int i;
+	unsigned long flags;
+
+	for_each_set_bit(i, &val, len * 8) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+		raw_spin_lock_irqsave(&irq->irq_lock, flags);
+		/*
+		 * More fun with GICv2 SGIs! If we're clearing one of them
+		 * from userspace, which source vcpu to clear? Let's not
+		 * even think of it, and blow the whole set.
+		 */
+		if (is_vgic_v2_sgi(vcpu, irq))
+			irq->source = 0;
+
+		irq->pending_latch = false;
+
+		raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+
+	return 0;
+}
+
+/*
+ * If we are fiddling with an IRQ's active state, we have to make sure the IRQ
+ * is not queued on some running VCPU's LRs, because then the change to the
+ * active state can be overwritten when the VCPU's state is synced coming back
+ * from the guest.
+ *
+ * For shared interrupts as well as GICv3 private interrupts, we have to
+ * stop all the VCPUs because interrupts can be migrated while we don't hold
+ * the IRQ locks and we don't want to be chasing moving targets.
+ *
+ * For GICv2 private interrupts we don't have to do anything because
+ * userspace accesses to the VGIC state already require all VCPUs to be
+ * stopped, and only the VCPU itself can modify its private interrupts
+ * active state, which guarantees that the VCPU is not running.
+ */
+static void vgic_access_active_prepare(struct kvm_vcpu *vcpu, u32 intid)
+{
+	if (vcpu->kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3 ||
+	    intid >= VGIC_NR_PRIVATE_IRQS)
+		kvm_arm_halt_guest(vcpu->kvm);
+}
+
+/* See vgic_access_active_prepare */
+static void vgic_access_active_finish(struct kvm_vcpu *vcpu, u32 intid)
+{
+	if (vcpu->kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3 ||
+	    intid >= VGIC_NR_PRIVATE_IRQS)
+		kvm_arm_resume_guest(vcpu->kvm);
+}
+
+static unsigned long __vgic_mmio_read_active(struct kvm_vcpu *vcpu,
+					     gpa_t addr, unsigned int len)
 {
 	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
 	u32 value = 0;
@@ -359,6 +474,10 @@ unsigned long vgic_mmio_read_active(struct kvm_vcpu *vcpu,
 	for (i = 0; i < len * 8; i++) {
 		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
 
+		/*
+		 * Even for HW interrupts, don't evaluate the HW state as
+		 * all the guest is interested in is the virtual state.
+		 */
 		if (irq->active)
 			value |= (1U << i);
 
@@ -368,6 +487,29 @@ unsigned long vgic_mmio_read_active(struct kvm_vcpu *vcpu,
 	return value;
 }
 
+unsigned long vgic_mmio_read_active(struct kvm_vcpu *vcpu,
+				    gpa_t addr, unsigned int len)
+{
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
+	u32 val;
+
+	mutex_lock(&vcpu->kvm->lock);
+	vgic_access_active_prepare(vcpu, intid);
+
+	val = __vgic_mmio_read_active(vcpu, addr, len);
+
+	vgic_access_active_finish(vcpu, intid);
+	mutex_unlock(&vcpu->kvm->lock);
+
+	return val;
+}
+
+unsigned long vgic_uaccess_read_active(struct kvm_vcpu *vcpu,
+				    gpa_t addr, unsigned int len)
+{
+	return __vgic_mmio_read_active(vcpu, addr, len);
+}
+
 /* Must be called with irq->irq_lock held */
 static void vgic_hw_irq_change_active(struct kvm_vcpu *vcpu, struct vgic_irq *irq,
 				      bool active, bool is_uaccess)
@@ -426,36 +568,6 @@ static void vgic_mmio_change_active(struct kvm_vcpu *vcpu, struct vgic_irq *irq,
 		raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
 }
 
-/*
- * If we are fiddling with an IRQ's active state, we have to make sure the IRQ
- * is not queued on some running VCPU's LRs, because then the change to the
- * active state can be overwritten when the VCPU's state is synced coming back
- * from the guest.
- *
- * For shared interrupts, we have to stop all the VCPUs because interrupts can
- * be migrated while we don't hold the IRQ locks and we don't want to be
- * chasing moving targets.
- *
- * For private interrupts we don't have to do anything because userspace
- * accesses to the VGIC state already require all VCPUs to be stopped, and
- * only the VCPU itself can modify its private interrupts active state, which
- * guarantees that the VCPU is not running.
- */
-static void vgic_change_active_prepare(struct kvm_vcpu *vcpu, u32 intid)
-{
-	if (vcpu->kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3 ||
-	    intid > VGIC_NR_PRIVATE_IRQS)
-		kvm_arm_halt_guest(vcpu->kvm);
-}
-
-/* See vgic_change_active_prepare */
-static void vgic_change_active_finish(struct kvm_vcpu *vcpu, u32 intid)
-{
-	if (vcpu->kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3 ||
-	    intid > VGIC_NR_PRIVATE_IRQS)
-		kvm_arm_resume_guest(vcpu->kvm);
-}
-
 static void __vgic_mmio_write_cactive(struct kvm_vcpu *vcpu,
 				      gpa_t addr, unsigned int len,
 				      unsigned long val)
@@ -477,11 +589,11 @@ void vgic_mmio_write_cactive(struct kvm_vcpu *vcpu,
 	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
 
 	mutex_lock(&vcpu->kvm->lock);
-	vgic_change_active_prepare(vcpu, intid);
+	vgic_access_active_prepare(vcpu, intid);
 
 	__vgic_mmio_write_cactive(vcpu, addr, len, val);
 
-	vgic_change_active_finish(vcpu, intid);
+	vgic_access_active_finish(vcpu, intid);
 	mutex_unlock(&vcpu->kvm->lock);
 }
 
@@ -514,11 +626,11 @@ void vgic_mmio_write_sactive(struct kvm_vcpu *vcpu,
 	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
 
 	mutex_lock(&vcpu->kvm->lock);
-	vgic_change_active_prepare(vcpu, intid);
+	vgic_access_active_prepare(vcpu, intid);
 
 	__vgic_mmio_write_sactive(vcpu, addr, len, val);
 
-	vgic_change_active_finish(vcpu, intid);
+	vgic_access_active_finish(vcpu, intid);
 	mutex_unlock(&vcpu->kvm->lock);
 }
 

virt/kvm/arm/vgic/vgic-mmio.h

@@ -138,6 +138,14 @@ void vgic_mmio_write_cenable(struct kvm_vcpu *vcpu,
 			     gpa_t addr, unsigned int len,
 			     unsigned long val);
 
+int vgic_uaccess_write_senable(struct kvm_vcpu *vcpu,
+			       gpa_t addr, unsigned int len,
+			       unsigned long val);
+
+int vgic_uaccess_write_cenable(struct kvm_vcpu *vcpu,
+			       gpa_t addr, unsigned int len,
+			       unsigned long val);
+
 unsigned long vgic_mmio_read_pending(struct kvm_vcpu *vcpu,
 				     gpa_t addr, unsigned int len);
 
@@ -149,9 +157,20 @@ void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu,
 			      gpa_t addr, unsigned int len,
 			      unsigned long val);
 
+int vgic_uaccess_write_spending(struct kvm_vcpu *vcpu,
+				gpa_t addr, unsigned int len,
+				unsigned long val);
+
+int vgic_uaccess_write_cpending(struct kvm_vcpu *vcpu,
+				gpa_t addr, unsigned int len,
+				unsigned long val);
+
 unsigned long vgic_mmio_read_active(struct kvm_vcpu *vcpu,
 				    gpa_t addr, unsigned int len);
 
+unsigned long vgic_uaccess_read_active(struct kvm_vcpu *vcpu,
+				    gpa_t addr, unsigned int len);
+
 void vgic_mmio_write_cactive(struct kvm_vcpu *vcpu,
 			     gpa_t addr, unsigned int len,
 			     unsigned long val);