[PATCH] ARM: 2835/1: Add UPF_SKIP_TEST to IXP4xx serial ports

Patch from Deepak Saxena

This allows the serial driver autconf to work properly on all the IXP
serial ports. W/o it we basically put the serial port in an unrecoverable
state and lose console.
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-ixp4xx/coyote-setup.c

@@ -61,7 +61,7 @@ static struct plat_serial8250_port coyote_uart_data[] = {
 		.mapbase	= IXP4XX_UART2_BASE_PHYS,
 		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
 		.uartclk	= IXP4XX_UART_XTAL,

arch/arm/mach-ixp4xx/gtwx5715-setup.c

@@ -83,7 +83,7 @@ static struct plat_serial8250_port gtwx5715_uart_platform_data[] = {
 	.mapbase	= IXP4XX_UART2_BASE_PHYS,
 	.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 	.irq		= IRQ_IXP4XX_UART2,
-	.flags		= UPF_BOOT_AUTOCONF,
+	.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 	.iotype		= UPIO_MEM,
 	.regshift	= 2,
 	.uartclk	= IXP4XX_UART_XTAL,

arch/arm/mach-ixp4xx/ixdp425-setup.c

@@ -82,7 +82,7 @@ static struct plat_serial8250_port ixdp425_uart_data[] = {
 		.mapbase	= IXP4XX_UART1_BASE_PHYS,
 		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
 		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
 		.uartclk	= IXP4XX_UART_XTAL,
@@ -91,7 +91,7 @@ static struct plat_serial8250_port ixdp425_uart_data[] = {
 		.mapbase	= IXP4XX_UART2_BASE_PHYS,
 		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
 		.uartclk	= IXP4XX_UART_XTAL,