Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (27 commits)
  Blackfin: hook up new rt_tgsigqueueinfo syscall
  Blackfin: improve CLKIN_HZ config default
  Blackfin: initial support for ftrace grapher
  Blackfin: initial support for ftrace
  Blackfin: enable support for LOCKDEP
  Blackfin: add preliminary support for STACKTRACE
  Blackfin: move custom sections into sections.h
  Blackfin: punt unused/wrong mutex-dec.h
  Blackfin: add support for irqflags
  Blackfin: add support for bzip2/lzma compressed kernel images
  Blackfin: convert Kconfig style to def_bool
  Blackfin: bf548-ezkit: update smsc911x resources
  Blackfin: update aedos-ipipe code to upstream 1.10-00
  Blackfin: bf537-stamp: update ADP5520 resources
  Blackfin: bf518f-ezbrd: fix SPI CS for SPI flash
  Blackfin: define SPI IRQ in board resources
  Blackfin: do not configure the UART early if on wrong processor
  Blackfin: fix deadlock in SMP IPI handler
  Blackfin: fix flag storage for irq funcs
  Blackfin: push down exception oops checking
  ...

arch/blackfin/Kconfig

@@ -6,59 +6,65 @@
 mainmenu "Blackfin Kernel Configuration"
 
 config MMU
-	bool
-	default n
+	def_bool n
 
 config FPU
-	bool
-	default n
+	def_bool n
 
 config RWSEM_GENERIC_SPINLOCK
-	bool
-	default y
+	def_bool y
 
 config RWSEM_XCHGADD_ALGORITHM
-	bool
-	default n
+	def_bool n
 
 config BLACKFIN
-	bool
-	default y
+	def_bool y
+	select HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_FUNCTION_TRACER
 	select HAVE_IDE
+	select HAVE_KERNEL_GZIP
+	select HAVE_KERNEL_BZIP2
+	select HAVE_KERNEL_LZMA
 	select HAVE_OPROFILE
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 
+config GENERIC_BUG
+	def_bool y
+	depends on BUG
+
 config ZONE_DMA
-	bool
-	default y
+	def_bool y
 
 config GENERIC_FIND_NEXT_BIT
-	bool
-	default y
+	def_bool y
 
 config GENERIC_HWEIGHT
-	bool
-	default y
+	def_bool y
 
 config GENERIC_HARDIRQS
-	bool
-	default y
+	def_bool y
 
 config GENERIC_IRQ_PROBE
-	bool
-	default y
+	def_bool y
 
 config GENERIC_GPIO
-	bool
-	default y
+	def_bool y
 
 config FORCE_MAX_ZONEORDER
 	int
 	default "14"
 
 config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
+	def_bool y
+
+config LOCKDEP_SUPPORT
+	def_bool y
+
+config STACKTRACE_SUPPORT
+	def_bool y
+
+config TRACE_IRQFLAGS_SUPPORT
+	def_bool y
 
 source "init/Kconfig"
 
@@ -408,12 +414,12 @@ comment "Clock/PLL Setup"
 
 config CLKIN_HZ
 	int "Frequency of the crystal on the board in Hz"
+	default "10000000" if BFIN532_IP0X
 	default "11059200" if BFIN533_STAMP
+	default "24576000" if PNAV10
+	default "25000000" # most people use this
 	default "27000000" if BFIN533_EZKIT
-	default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN538_EZKIT || BFIN518F-EZBRD)
 	default "30000000" if BFIN561_EZKIT
-	default "24576000" if PNAV10
-	default "10000000" if BFIN532_IP0X
 	help
 	  The frequency of CLKIN crystal oscillator on the board in Hz.
 	  Warning: This value should match the crystal on the board. Otherwise,

arch/blackfin/Makefile

@@ -137,7 +137,7 @@ archclean:
 
 INSTALL_PATH ?= /tftpboot
 boot := arch/$(ARCH)/boot
-BOOT_TARGETS = vmImage
+BOOT_TARGETS = vmImage vmImage.bz2 vmImage.gz vmImage.lzma
 PHONY += $(BOOT_TARGETS) install
 KBUILD_IMAGE := $(boot)/vmImage
 
@@ -150,7 +150,10 @@ install:
 	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install
 
 define archhelp
-  echo  '* vmImage         - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage)'
+  echo  '* vmImage         - Alias to selected kernel format (vmImage.gz by default)'
+  echo  '  vmImage.bz2     - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.bz2)'
+  echo  '* vmImage.gz      - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.gz)'
+  echo  '  vmImage.lzma    - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.lzma)'
   echo  '  install         - Install kernel using'
   echo  '                     (your) ~/bin/$(CROSS_COMPILE)installkernel or'
   echo  '                     (distribution) PATH: $(CROSS_COMPILE)installkernel or'

arch/blackfin/boot/.gitignore

-+vmImage
+vmImage*
+vmlinux*

arch/blackfin/boot/Makefile

@@ -8,24 +8,41 @@
 
 MKIMAGE := $(srctree)/scripts/mkuboot.sh
 
-targets := vmImage
-extra-y += vmlinux.bin vmlinux.gz
+targets := vmImage vmImage.bz2 vmImage.gz vmImage.lzma
+extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(ARCH) -O linux -T kernel \
-                   -C gzip -n 'Linux-$(KERNELRELEASE)' -a $(CONFIG_BOOT_LOAD) \
+                   -C $(2) -n 'Linux-$(KERNELRELEASE)' -a $(CONFIG_BOOT_LOAD) \
                    -e $(shell $(NM) vmlinux | awk '$$NF == "__start" {print $$1}') \
                    -d $< $@
 
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
 
-$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,gzip)
 
-$(obj)/vmImage: $(obj)/vmlinux.gz
-	$(call if_changed,uimage)
-	@$(kecho) 'Kernel: $@ is ready'
+$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,bzip2)
+
+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,lzma)
+
+$(obj)/vmImage.bz2: $(obj)/vmlinux.bin.bz2
+	$(call if_changed,uimage,bzip2)
+
+$(obj)/vmImage.gz: $(obj)/vmlinux.bin.gz
+	$(call if_changed,uimage,gzip)
+
+$(obj)/vmImage.lzma: $(obj)/vmlinux.bin.lzma
+	$(call if_changed,uimage,lzma)
+
+suffix-$(CONFIG_KERNEL_GZIP)  := gz
+suffix-$(CONFIG_KERNEL_BZIP2) := bz2
+suffix-$(CONFIG_KERNEL_LZMA)  := lzma
+$(obj)/vmImage: $(obj)/vmImage.$(suffix-y)
+	@ln -sf $(notdir $<) $@
 
 install:
 	sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)"

arch/blackfin/include/asm/atomic.h

@@ -90,7 +90,7 @@ static inline int atomic_test_mask(int mask, atomic_t *v)
 
 static inline void atomic_add(int i, atomic_t *v)
 {
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter += i;
@@ -99,7 +99,7 @@ static inline void atomic_add(int i, atomic_t *v)
 
 static inline void atomic_sub(int i, atomic_t *v)
 {
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter -= i;
@@ -110,7 +110,7 @@ static inline void atomic_sub(int i, atomic_t *v)
 static inline int atomic_add_return(int i, atomic_t *v)
 {
 	int __temp = 0;
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter += i;
@@ -124,7 +124,7 @@ static inline int atomic_add_return(int i, atomic_t *v)
 static inline int atomic_sub_return(int i, atomic_t *v)
 {
 	int __temp = 0;
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter -= i;
@@ -136,7 +136,7 @@ static inline int atomic_sub_return(int i, atomic_t *v)
 
 static inline void atomic_inc(volatile atomic_t *v)
 {
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter++;
@@ -145,7 +145,7 @@ static inline void atomic_inc(volatile atomic_t *v)
 
 static inline void atomic_dec(volatile atomic_t *v)
 {
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter--;
@@ -154,7 +154,7 @@ static inline void atomic_dec(volatile atomic_t *v)
 
 static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
 {
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter &= ~mask;
@@ -163,7 +163,7 @@ static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
 
 static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
 {
-	long flags;
+	unsigned long flags;
 
 	local_irq_save_hw(flags);
 	v->counter |= mask;

arch/blackfin/include/asm/bfin-global.h

@@ -31,7 +31,7 @@
 
 #ifndef __ASSEMBLY__
 
-#include <asm-generic/sections.h>
+#include <asm/sections.h>
 #include <asm/ptrace.h>
 #include <asm/user.h>
 #include <linux/linkage.h>
@@ -99,15 +99,6 @@ extern const char bfin_board_name[];
 extern unsigned long bfin_sic_iwr[];
 extern unsigned vr_wakeup;
 extern u16 _bfin_swrst; /* shadow for Software Reset Register (SWRST) */
-extern unsigned long _ramstart, _ramend, _rambase;
-extern unsigned long memory_start, memory_end, physical_mem_end;
-extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[],
-	_ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _sbss_b_l1[], _ebss_b_l1[],
-	_stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[],
-	_ebss_l2[], _l2_lma_start[];
-
-/* only used when MTD_UCLINUX */
-extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size;
 
 #ifdef CONFIG_BFIN_ICACHE_LOCK
 extern void cache_grab_lock(int way);

arch/blackfin/include/asm/bitops.h

@@ -109,7 +109,8 @@ static inline void clear_bit(int nr, volatile unsigned long *addr)
 
 static inline void change_bit(int nr, volatile unsigned long *addr)
 {
-	int mask, flags;
+	int mask;
+	unsigned long flags;
 	unsigned long *ADDR = (unsigned long *)addr;
 
 	ADDR += nr >> 5;

arch/blackfin/include/asm/bug.h

@@ -2,13 +2,58 @@
 #define _BLACKFIN_BUG_H
 
 #ifdef CONFIG_BUG
-#define HAVE_ARCH_BUG
 
-#define BUG() do { \
-	dump_bfin_trace_buffer(); \
-	printk(KERN_EMERG "BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
-	panic("BUG!"); \
-} while (0)
+#define BFIN_BUG_OPCODE	0xefcd
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+
+#define _BUG_OR_WARN(flags)						\
+	asm volatile(							\
+		"1:	.hword	%0\n"					\
+		"	.section __bug_table,\"a\",@progbits\n"		\
+		"2:	.long	1b\n"					\
+		"	.long	%1\n"					\
+		"	.short	%2\n"					\
+		"	.short	%3\n"					\
+		"	.org	2b + %4\n"				\
+		"	.previous"					\
+		:							\
+		: "i"(BFIN_BUG_OPCODE), "i"(__FILE__),			\
+		  "i"(__LINE__), "i"(flags),				\
+		  "i"(sizeof(struct bug_entry)))
+
+#else
+
+#define _BUG_OR_WARN(flags)						\
+	asm volatile(							\
+		"1:	.hword	%0\n"					\
+		"	.section __bug_table,\"a\",@progbits\n"		\
+		"2:	.long	1b\n"					\
+		"	.short	%1\n"					\
+		"	.org	2b + %2\n"				\
+		"	.previous"					\
+		:							\
+		: "i"(BFIN_BUG_OPCODE), "i"(flags),			\
+		  "i"(sizeof(struct bug_entry)))
+
+#endif /* CONFIG_DEBUG_BUGVERBOSE */
+
+#define BUG()								\
+	do {								\
+		_BUG_OR_WARN(0);					\
+		for (;;);						\
+	} while (0)
+
+#define WARN_ON(condition)							\
+	({								\
+		int __ret_warn_on = !!(condition);			\
+		if (unlikely(__ret_warn_on))				\
+			_BUG_OR_WARN(BUGFLAG_WARNING);			\
+		unlikely(__ret_warn_on);				\
+	})
+
+#define HAVE_ARCH_BUG
+#define HAVE_ARCH_WARN_ON
 
 #endif
 

arch/blackfin/include/asm/cache.h

@@ -34,9 +34,13 @@
 #define L1_CACHE_SHIFT_MAX	5
 
 #if defined(CONFIG_SMP) && \
-    !defined(CONFIG_BFIN_CACHE_COHERENT) && \
-    defined(CONFIG_BFIN_DCACHE)
-#define __ARCH_SYNC_CORE_DCACHE
+    !defined(CONFIG_BFIN_CACHE_COHERENT)
+# if defined(CONFIG_BFIN_ICACHE)
+# define __ARCH_SYNC_CORE_ICACHE
+# endif
+# if defined(CONFIG_BFIN_DCACHE)
+# define __ARCH_SYNC_CORE_DCACHE
+# endif
 #ifndef __ASSEMBLY__
 asmlinkage void __raw_smp_mark_barrier_asm(void);
 asmlinkage void __raw_smp_check_barrier_asm(void);
@@ -51,6 +55,7 @@ static inline void smp_check_barrier(void)
 }
 
 void resync_core_dcache(void);
+void resync_core_icache(void);
 #endif
 #endif
 

arch/blackfin/include/asm/cacheflush.h

@@ -37,6 +37,7 @@ extern void blackfin_dcache_flush_range(unsigned long start_address, unsigned lo
 extern void blackfin_dcache_invalidate_range(unsigned long start_address, unsigned long end_address);
 extern void blackfin_dflush_page(void *page);
 extern void blackfin_invalidate_entire_dcache(void);
+extern void blackfin_invalidate_entire_icache(void);
 
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
@@ -97,7 +98,7 @@ do { memcpy(dst, src, len);						\
 extern unsigned long reserved_mem_dcache_on;
 extern unsigned long reserved_mem_icache_on;
 
-static inline int bfin_addr_dcachable(unsigned long addr)
+static inline int bfin_addr_dcacheable(unsigned long addr)
 {
 #ifdef CONFIG_BFIN_DCACHE
 	if (addr < (_ramend - DMA_UNCACHED_REGION))

arch/blackfin/include/asm/cpu.h

@@ -34,6 +34,7 @@ struct blackfin_cpudata {
 	unsigned int dmemctl;
 	unsigned long loops_per_jiffy;
 	unsigned long dcache_invld_count;
+	unsigned long icache_invld_count;
 };
 
 DECLARE_PER_CPU(struct blackfin_cpudata, cpu_data);

arch/blackfin/include/asm/ftrace.h

-/* empty */
+/*
+ * Blackfin ftrace code
+ *
+ * Copyright 2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_BFIN_FTRACE_H__
+#define __ASM_BFIN_FTRACE_H__
+
+#define MCOUNT_INSN_SIZE	8 /* sizeof mcount call: LINK + CALL */
+
+#endif

arch/blackfin/include/asm/ipipe.h

@@ -35,10 +35,10 @@
 #include <asm/atomic.h>
 #include <asm/traps.h>
 
-#define IPIPE_ARCH_STRING     "1.9-01"
+#define IPIPE_ARCH_STRING     "1.10-00"
 #define IPIPE_MAJOR_NUMBER    1
-#define IPIPE_MINOR_NUMBER    9
-#define IPIPE_PATCH_NUMBER    1
+#define IPIPE_MINOR_NUMBER    10
+#define IPIPE_PATCH_NUMBER    0
 
 #ifdef CONFIG_SMP
 #error "I-pipe/blackfin: SMP not implemented"
@@ -54,10 +54,11 @@ do {						\
 
 #define task_hijacked(p)						\
 	({								\
-		int __x__ = ipipe_current_domain != ipipe_root_domain;	\
-		/* We would need to clear the SYNC flag for the root domain */ \
-		/* over the current processor in SMP mode. */		\
-		local_irq_enable_hw(); __x__;				\
+		int __x__ = __ipipe_root_domain_p;			\
+		__clear_bit(IPIPE_SYNC_FLAG, &ipipe_root_cpudom_var(status)); \
+		if (__x__)						\
+			local_irq_enable_hw();				\
+		!__x__;							\
 	})
 
 struct ipipe_domain;
@@ -179,23 +180,24 @@ static inline unsigned long __ipipe_ffnz(unsigned long ul)
 
 #define __ipipe_run_isr(ipd, irq)					\
 	do {								\
-		if (ipd == ipipe_root_domain) {				\
+		if (!__ipipe_pipeline_head_p(ipd))			\
 			local_irq_enable_hw();				\
-			if (ipipe_virtual_irq_p(irq))			\
+		if (ipd == ipipe_root_domain) {				\
+			if (unlikely(ipipe_virtual_irq_p(irq))) {	\
+				irq_enter();				\
 				ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \
-			else						\
+				irq_exit();				\
+			} else 						\
 				ipd->irqs[irq].handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)); \
-			local_irq_disable_hw();				\
 		} else {						\
 			__clear_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \
-			local_irq_enable_nohead(ipd);			\
 			ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \
 			/* Attempt to exit the outer interrupt level before \
 			 * starting the deferred IRQ processing. */	\
-			local_irq_disable_nohead(ipd);			\
 			__ipipe_run_irqtail();				\
 			__set_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \
 		}							\
+		local_irq_disable_hw();					\
 	} while (0)
 
 #define __ipipe_syscall_watched_p(p, sc)	\

arch/blackfin/include/asm/irq.h

@@ -17,270 +17,17 @@
 #ifndef _BFIN_IRQ_H_
 #define _BFIN_IRQ_H_
 
-/* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h>*/
-#include <mach/irq.h>
-#include <asm/pda.h>
-#include <asm/processor.h>
-
-#ifdef CONFIG_SMP
-/* Forward decl needed due to cdef inter dependencies */
-static inline uint32_t __pure bfin_dspid(void);
-# define blackfin_core_id() (bfin_dspid() & 0xff)
-# define bfin_irq_flags cpu_pda[blackfin_core_id()].imask
-#else
-extern unsigned long bfin_irq_flags;
-#endif
-
-#ifdef CONFIG_IPIPE
-
-#include <linux/ipipe_trace.h>
+#include <linux/irqflags.h>
 
-void __ipipe_unstall_root(void);
-
-void __ipipe_restore_root(unsigned long flags);
-
-#ifdef CONFIG_DEBUG_HWERR
-# define __all_masked_irq_flags 0x3f
-# define __save_and_cli_hw(x) \
-	__asm__ __volatile__( \
-		"cli %0;" \
-		"sti %1;" \
-		: "=&d"(x) \
-		: "d" (0x3F) \
-	)
-#else
-# define __all_masked_irq_flags 0x1f
-# define __save_and_cli_hw(x) \
-	__asm__ __volatile__( \
-		"cli %0;" \
-		: "=&d"(x) \
-	)
-#endif
-
-#define irqs_enabled_from_flags_hw(x)	((x) != __all_masked_irq_flags)
-#define raw_irqs_disabled_flags(flags)	(!irqs_enabled_from_flags_hw(flags))
-#define local_test_iflag_hw(x)		irqs_enabled_from_flags_hw(x)
-
-#define local_save_flags(x)					 \
-	do {							 \
-		(x) = __ipipe_test_root() ?			 \
-			__all_masked_irq_flags : bfin_irq_flags; \
-		barrier();					 \
-	} while (0)
-
-#define local_irq_save(x)					 \
-	do {						 	 \
-		(x) = __ipipe_test_and_stall_root() ?		 \
-			__all_masked_irq_flags : bfin_irq_flags; \
-		barrier();					 \
-	} while (0)
-
-static inline void local_irq_restore(unsigned long x)
-{
-	barrier();
-	__ipipe_restore_root(x == __all_masked_irq_flags);
-}
-
-#define local_irq_disable()			\
-	do {					\
-		__ipipe_stall_root();		\
-		barrier();			\
-	} while (0)
-
-static inline void local_irq_enable(void)
-{
-	barrier();
-	__ipipe_unstall_root();
-}
-
-#define irqs_disabled()		__ipipe_test_root()
-
-#define local_save_flags_hw(x) \
-	__asm__ __volatile__( \
-		"cli %0;" \
-		"sti %0;" \
-		: "=d"(x) \
-	)
-
-#define	irqs_disabled_hw()				\
-	({						\
-		unsigned long flags;			\
-		local_save_flags_hw(flags);		\
-		!irqs_enabled_from_flags_hw(flags);	\
-	})
-
-static inline unsigned long raw_mangle_irq_bits(int virt, unsigned long real)
-{
-	/* Merge virtual and real interrupt mask bits into a single
-	   32bit word. */
-	return (real & ~(1 << 31)) | ((virt != 0) << 31);
-}
-
-static inline int raw_demangle_irq_bits(unsigned long *x)
-{
-	int virt = (*x & (1 << 31)) != 0;
-	*x &= ~(1L << 31);
-	return virt;
-}
-
-#ifdef CONFIG_IPIPE_TRACE_IRQSOFF
-
-#define local_irq_disable_hw()						\
-	do {								\
-		int _tmp_dummy;						\
-		if (!irqs_disabled_hw())				\
-			ipipe_trace_begin(0x80000000);			\
-		__asm__ __volatile__ ("cli %0;" : "=d" (_tmp_dummy) : );	\
-	} while (0)
-
-#define local_irq_enable_hw()						\
-	do {								\
-		if (irqs_disabled_hw())					\
-			ipipe_trace_end(0x80000000);			\
-		__asm__ __volatile__ ("sti %0;" : : "d"(bfin_irq_flags));	\
-	} while (0)
-
-#define local_irq_save_hw(x)				\
-	do {						\
-		__save_and_cli_hw(x);			\
-		if (local_test_iflag_hw(x))		\
-			ipipe_trace_begin(0x80000001);	\
-	} while (0)
-
-#define local_irq_restore_hw(x)				\
-	do {						\
-		if (local_test_iflag_hw(x)) {		\
-			ipipe_trace_end(0x80000001);	\
-			local_irq_enable_hw_notrace();	\
-		}					\
-	} while (0)
-
-#define local_irq_disable_hw_notrace()					\
-	do {								\
-		int _tmp_dummy;						\
-		__asm__ __volatile__ ("cli %0;" : "=d" (_tmp_dummy) : );	\
-	} while (0)
-
-#define local_irq_enable_hw_notrace() \
-	__asm__ __volatile__( \
-		"sti %0;" \
-		: \
-		: "d"(bfin_irq_flags) \
-	)
-
-#define local_irq_save_hw_notrace(x) __save_and_cli_hw(x)
-
-#define local_irq_restore_hw_notrace(x)			\
-	do {						\
-		if (local_test_iflag_hw(x))		\
-			local_irq_enable_hw_notrace();	\
-	} while (0)
-
-#else /* CONFIG_IPIPE_TRACE_IRQSOFF */
-
-#define local_irq_enable_hw() \
-	__asm__ __volatile__( \
-		"sti %0;" \
-		: \
-		: "d"(bfin_irq_flags) \
-	)
-
-#define local_irq_disable_hw()			\
-	do {					\
-		int _tmp_dummy;			\
-		__asm__ __volatile__ (		\
-			"cli %0;"		\
-			: "=d" (_tmp_dummy));	\
-	} while (0)
-
-#define local_irq_restore_hw(x) \
-	do { \
-		if (irqs_enabled_from_flags_hw(x)) \
-			local_irq_enable_hw(); \
-	} while (0)
-
-#define local_irq_save_hw(x)		__save_and_cli_hw(x)
-
-#define local_irq_disable_hw_notrace()	local_irq_disable_hw()
-#define local_irq_enable_hw_notrace()	local_irq_enable_hw()
-#define local_irq_save_hw_notrace(x)	local_irq_save_hw(x)
-#define local_irq_restore_hw_notrace(x)	local_irq_restore_hw(x)
-
-#endif  /* CONFIG_IPIPE_TRACE_IRQSOFF */
-
-#else /* !CONFIG_IPIPE */
-
-/*
- * Interrupt configuring macros.
- */
-#define local_irq_disable() \
-	do { \
-		int __tmp_dummy; \
-		__asm__ __volatile__( \
-			"cli %0;" \
-			: "=d" (__tmp_dummy) \
-		); \
-	} while (0)
-
-#define local_irq_enable() \
-	__asm__ __volatile__( \
-		"sti %0;" \
-		: \
-		: "d" (bfin_irq_flags) \
-	)
-
-#ifdef CONFIG_DEBUG_HWERR
-# define __save_and_cli(x) \
-	__asm__ __volatile__( \
-		"cli %0;" \
-		"sti %1;" \
-		: "=&d" (x) \
-		: "d" (0x3F) \
-	)
-#else
-# define __save_and_cli(x) \
-	__asm__ __volatile__( \
-		"cli %0;" \
-		: "=&d" (x) \
-	)
-#endif
-
-#define local_save_flags(x) \
-	__asm__ __volatile__( \
-		"cli %0;" \
-		"sti %0;" \
-		: "=d" (x) \
-	)
-
-#ifdef CONFIG_DEBUG_HWERR
-#define irqs_enabled_from_flags(x) (((x) & ~0x3f) != 0)
-#else
-#define irqs_enabled_from_flags(x) ((x) != 0x1f)
-#endif
-
-#define local_irq_restore(x) \
-	do { \
-		if (irqs_enabled_from_flags(x)) \
-			local_irq_enable(); \
-	} while (0)
-
-/* For spinlocks etc */
-#define local_irq_save(x) __save_and_cli(x)
-
-#define irqs_disabled()				\
-({						\
-	unsigned long flags;			\
-	local_save_flags(flags);		\
-	!irqs_enabled_from_flags(flags);	\
-})
-
-#define local_irq_save_hw(x)		local_irq_save(x)
-#define local_irq_restore_hw(x)		local_irq_restore(x)
-#define local_irq_enable_hw()		local_irq_enable()
-#define local_irq_disable_hw()		local_irq_disable()
-#define irqs_disabled_hw()		irqs_disabled()
+/* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h> */
+#include <mach/irq.h>
 
-#endif /* !CONFIG_IPIPE */
+/* Xenomai IPIPE helpers */
+#define local_irq_restore_hw(x) local_irq_restore(x)
+#define local_irq_save_hw(x)    local_irq_save(x)
+#define local_irq_enable_hw(x)  local_irq_enable(x)
+#define local_irq_disable_hw(x) local_irq_disable(x)
+#define irqs_disabled_hw(x)     irqs_disabled(x)
 
 #if ANOMALY_05000244 && defined(CONFIG_BFIN_ICACHE)
 # define NOP_PAD_ANOMALY_05000244 "nop; nop;"

arch/blackfin/include/asm/irqflags.h

+/*
+ * interface to Blackfin CEC
+ *
+ * Copyright 2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_BFIN_IRQFLAGS_H__
+#define __ASM_BFIN_IRQFLAGS_H__
+
+#ifdef CONFIG_SMP
+# include <asm/pda.h>
+# include <asm/processor.h>
+/* Forward decl needed due to cdef inter dependencies */
+static inline uint32_t __pure bfin_dspid(void);
+# define blackfin_core_id() (bfin_dspid() & 0xff)
+# define bfin_irq_flags cpu_pda[blackfin_core_id()].imask
+#else
+extern unsigned long bfin_irq_flags;
+#endif
+
+static inline void bfin_sti(unsigned long flags)
+{
+	asm volatile("sti %0;" : : "d" (flags));
+}
+
+static inline unsigned long bfin_cli(void)
+{
+	unsigned long flags;
+	asm volatile("cli %0;" : "=d" (flags));
+	return flags;
+}
+
+static inline void raw_local_irq_disable(void)
+{
+	bfin_cli();
+}
+static inline void raw_local_irq_enable(void)
+{
+	bfin_sti(bfin_irq_flags);
+}
+
+#define raw_local_save_flags(flags) do { (flags) = bfin_read_IMASK(); } while (0)
+
+#define raw_irqs_disabled_flags(flags) (((flags) & ~0x3f) == 0)
+
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+	if (!raw_irqs_disabled_flags(flags))
+		raw_local_irq_enable();
+}
+
+static inline unsigned long __raw_local_irq_save(void)
+{
+	unsigned long flags = bfin_cli();
+#ifdef CONFIG_DEBUG_HWERR
+	bfin_sti(0x3f);
+#endif
+	return flags;
+}
+#define raw_local_irq_save(flags) do { (flags) = __raw_local_irq_save(); } while (0)
+
+#endif

arch/blackfin/include/asm/mutex-dec.h

-/*
- * include/asm-generic/mutex-dec.h
- *
- * Generic implementation of the mutex fastpath, based on atomic
- * decrement/increment.
- */
-#ifndef _ASM_GENERIC_MUTEX_DEC_H
-#define _ASM_GENERIC_MUTEX_DEC_H
-
-/**
- *  __mutex_fastpath_lock - try to take the lock by moving the count
- *                          from 1 to a 0 value
- *  @count: pointer of type atomic_t
- *  @fail_fn: function to call if the original value was not 1
- *
- * Change the count from 1 to a value lower than 1, and call <fail_fn> if
- * it wasn't 1 originally. This function MUST leave the value lower than
- * 1 even when the "1" assertion wasn't true.
- */
-static inline void
-__mutex_fastpath_lock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *))
-{
-	if (unlikely(atomic_dec_return(count) < 0))
-		fail_fn(count);
-	else
-		smp_mb();
-}
-
-/**
- *  __mutex_fastpath_lock_retval - try to take the lock by moving the count
- *                                 from 1 to a 0 value
- *  @count: pointer of type atomic_t
- *  @fail_fn: function to call if the original value was not 1
- *
- * Change the count from 1 to a value lower than 1, and call <fail_fn> if
- * it wasn't 1 originally. This function returns 0 if the fastpath succeeds,
- * or anything the slow path function returns.
- */
-static inline int
-__mutex_fastpath_lock_retval(atomic_t *count, fastcall int (*fail_fn)(atomic_t *))
-{
-	if (unlikely(atomic_dec_return(count) < 0))
-		return fail_fn(count);
-	else {
-		smp_mb();
-		return 0;
-	}
-}
-
-/**
- *  __mutex_fastpath_unlock - try to promote the count from 0 to 1
- *  @count: pointer of type atomic_t
- *  @fail_fn: function to call if the original value was not 0
- *
- * Try to promote the count from 0 to 1. If it wasn't 0, call <fail_fn>.
- * In the failure case, this function is allowed to either set the value to
- * 1, or to set it to a value lower than 1.
- *
- * If the implementation sets it to a value of lower than 1, then the
- * __mutex_slowpath_needs_to_unlock() macro needs to return 1, it needs
- * to return 0 otherwise.
- */
-static inline void
-__mutex_fastpath_unlock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *))
-{
-	smp_mb();
-	if (unlikely(atomic_inc_return(count) <= 0))
-		fail_fn(count);
-}
-
-#define __mutex_slowpath_needs_to_unlock()		1
-
-/**
- * __mutex_fastpath_trylock - try to acquire the mutex, without waiting
- *
- *  @count: pointer of type atomic_t
- *  @fail_fn: fallback function
- *
- * Change the count from 1 to a value lower than 1, and return 0 (failure)
- * if it wasn't 1 originally, or return 1 (success) otherwise. This function
- * MUST leave the value lower than 1 even when the "1" assertion wasn't true.
- * Additionally, if the value was < 0 originally, this function must not leave
- * it to 0 on failure.
- *
- * If the architecture has no effective trylock variant, it should call the
- * <fail_fn> spinlock-based trylock variant unconditionally.
- */
-static inline int
-__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *))
-{
-	/*
-	 * We have two variants here. The cmpxchg based one is the best one
-	 * because it never induce a false contention state.  It is included
-	 * here because architectures using the inc/dec algorithms over the
-	 * xchg ones are much more likely to support cmpxchg natively.
-	 *
-	 * If not we fall back to the spinlock based variant - that is
-	 * just as efficient (and simpler) as a 'destructive' probing of
-	 * the mutex state would be.
-	 */
-#ifdef __HAVE_ARCH_CMPXCHG
-	if (likely(atomic_cmpxchg(count, 1, 0) == 1)) {
-		smp_mb();
-		return 1;
-	}
-	return 0;
-#else
-	return fail_fn(count);
-#endif
-}
-
-#endif

arch/blackfin/include/asm/sections.h

@@ -4,4 +4,15 @@
 /* nothing to see, move along */
 #include <asm-generic/sections.h>
 
+/* only used when MTD_UCLINUX */
+extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size;
+
+extern unsigned long _ramstart, _ramend, _rambase;
+extern unsigned long memory_start, memory_end, physical_mem_end;
+
+extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[],
+	_ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _sbss_b_l1[], _ebss_b_l1[],
+	_stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[],
+	_ebss_l2[], _l2_lma_start[];
+
 #endif

arch/blackfin/include/asm/system.h

@@ -35,10 +35,10 @@
 #define _BLACKFIN_SYSTEM_H
 
 #include <linux/linkage.h>
-#include <linux/compiler.h>
+#include <linux/irqflags.h>
 #include <mach/anomaly.h>
+#include <asm/cache.h>
 #include <asm/pda.h>
-#include <asm/processor.h>
 #include <asm/irq.h>
 
 /*

arch/blackfin/include/asm/unistd.h

@@ -380,8 +380,9 @@
 #define __NR_inotify_init1	365
 #define __NR_preadv		366
 #define __NR_pwritev		367
+#define __NR_rt_tgsigqueueinfo	368
 
-#define __NR_syscall		368
+#define __NR_syscall		369
 #define NR_syscalls		__NR_syscall
 
 /* Old optional stuff no one actually uses */

arch/blackfin/kernel/Makefile

@@ -15,6 +15,10 @@ else
     obj-y += time.o
 endif
 
+obj-$(CONFIG_FUNCTION_TRACER)        += ftrace-entry.o
+obj-$(CONFIG_FUNCTION_GRAPH_TRACER)  += ftrace.o
+CFLAGS_REMOVE_ftrace.o = -pg
+
 obj-$(CONFIG_IPIPE)                  += ipipe.o
 obj-$(CONFIG_IPIPE_TRACE_MCOUNT)     += mcount.o
 obj-$(CONFIG_BFIN_GPTIMERS)          += gptimers.o
@@ -23,6 +27,7 @@ obj-$(CONFIG_MODULES)                += module.o
 obj-$(CONFIG_KGDB)                   += kgdb.o
 obj-$(CONFIG_KGDB_TESTS)             += kgdb_test.o
 obj-$(CONFIG_EARLY_PRINTK)           += early_printk.o
+obj-$(CONFIG_STACKTRACE)             += stacktrace.o
 
 # the kgdb test puts code into L2 and without linker
 # relaxation, we need to force long calls to/from it

arch/blackfin/kernel/bfin_dma_5xx.c

@@ -453,10 +453,10 @@ void *dma_memcpy(void *pdst, const void *psrc, size_t size)
 	unsigned long src = (unsigned long)psrc;
 	size_t bulk, rest;
 
-	if (bfin_addr_dcachable(src))
+	if (bfin_addr_dcacheable(src))
 		blackfin_dcache_flush_range(src, src + size);
 
-	if (bfin_addr_dcachable(dst))
+	if (bfin_addr_dcacheable(dst))
 		blackfin_dcache_invalidate_range(dst, dst + size);
 
 	bulk = size & ~0xffff;

arch/blackfin/kernel/bfin_ksyms.c

@@ -103,3 +103,8 @@ EXPORT_SYMBOL(__raw_smp_mark_barrier_asm);
 EXPORT_SYMBOL(__raw_smp_check_barrier_asm);
 #endif
 #endif
+
+#ifdef CONFIG_FUNCTION_TRACER
+extern void _mcount(void);
+EXPORT_SYMBOL(_mcount);
+#endif

arch/blackfin/kernel/cplb-mpu/cplbmgr.c

@@ -151,7 +151,7 @@ static noinline int dcplb_miss(unsigned int cpu)
 
 	d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB;
 #ifdef CONFIG_BFIN_DCACHE
-	if (bfin_addr_dcachable(addr)) {
+	if (bfin_addr_dcacheable(addr)) {
 		d_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND;
 #ifdef CONFIG_BFIN_WT
 		d_data |= CPLB_L1_AOW | CPLB_WT;

arch/blackfin/kernel/cplb-nompu/cplbmgr.c

@@ -28,6 +28,7 @@
 #include <asm/cplbinit.h>
 #include <asm/cplb.h>
 #include <asm/mmu_context.h>
+#include <asm/traps.h>
 
 /*
  * WARNING
@@ -100,28 +101,6 @@ static inline void write_icplb_data(int cpu, int idx, unsigned long data,
 #endif
 }
 
-/*
- * Given the contents of the status register, return the index of the
- * CPLB that caused the fault.
- */
-static inline int faulting_cplb_index(int status)
-{
-	int signbits = __builtin_bfin_norm_fr1x32(status & 0xFFFF);
-	return 30 - signbits;
-}
-
-/*
- * Given the contents of the status register and the DCPLB_DATA contents,
- * return true if a write access should be permitted.
- */
-static inline int write_permitted(int status, unsigned long data)
-{
-	if (status & FAULT_USERSUPV)
-		return !!(data & CPLB_SUPV_WR);
-	else
-		return !!(data & CPLB_USER_WR);
-}
-
 /* Counters to implement round-robin replacement.  */
 static int icplb_rr_index[NR_CPUS] PDT_ATTR;
 static int dcplb_rr_index[NR_CPUS] PDT_ATTR;
@@ -245,43 +224,16 @@ MGR_ATTR static int dcplb_miss(int cpu)
 	return CPLB_RELOADED;
 }
 
-MGR_ATTR static noinline int dcplb_protection_fault(int cpu)
-{
-	int status = bfin_read_DCPLB_STATUS();
-
-	nr_dcplb_prot[cpu]++;
-
-	if (likely(status & FAULT_RW)) {
-		int idx = faulting_cplb_index(status);
-		unsigned long regaddr = DCPLB_DATA0 + idx * 4;
-		unsigned long data = bfin_read32(regaddr);
-
-		/* Check if fault is to dirty a clean page */
-		if (!(data & CPLB_WT) && !(data & CPLB_DIRTY) &&
-		    write_permitted(status, data)) {
-
-			dcplb_tbl[cpu][idx].data = data;
-			bfin_write32(regaddr, data);
-			return CPLB_RELOADED;
-		}
-	}
-
-	return CPLB_PROT_VIOL;
-}
-
 MGR_ATTR int cplb_hdr(int seqstat, struct pt_regs *regs)
 {
 	int cause = seqstat & 0x3f;
 	unsigned int cpu = smp_processor_id();
 	switch (cause) {
-	case 0x2C:
+	case VEC_CPLB_I_M:
 		return icplb_miss(cpu);
-	case 0x26:
+	case VEC_CPLB_M:
 		return dcplb_miss(cpu);
 	default:
-		if (unlikely(cause == 0x23))
-			return dcplb_protection_fault(cpu);
-
 		return CPLB_UNKNOWN_ERR;
 	}
 }

arch/blackfin/kernel/early_printk.c

@@ -202,11 +202,15 @@ asmlinkage void __init init_early_exception_vectors(void)
 asmlinkage void __init early_trap_c(struct pt_regs *fp, void *retaddr)
 {
 	/* This can happen before the uart is initialized, so initialize
-	 * the UART now
+	 * the UART now (but only if we are running on the processor we think
+	 * we are compiled for - otherwise we write to MMRs that don't exist,
+	 * and cause other problems. Nothing comes out the UART, but it does
+	 * end up in the __buf_log.
 	 */
-	if (likely(early_console == NULL))
+	if (likely(early_console == NULL) && CPUID == bfin_cpuid())
 		setup_early_printk(DEFAULT_EARLY_PORT);
 
+	printk(KERN_EMERG "Early panic\n");
 	dump_bfin_mem(fp);
 	show_regs(fp);
 	dump_bfin_trace_buffer();

arch/blackfin/kernel/ftrace-entry.S

+/*
+ * mcount and friends -- ftrace stuff
+ *
+ * Copyright (C) 2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/linkage.h>
+#include <asm/ftrace.h>
+
+.text
+
+/* GCC will have called us before setting up the function prologue, so we
+ * can clobber the normal scratch registers, but we need to make sure to
+ * save/restore the registers used for argument passing (R0-R2) in case
+ * the profiled function is using them.  With data registers, R3 is the
+ * only one we can blow away.  With pointer registers, we have P0-P2.
+ *
+ * Upon entry, the RETS will point to the top of the current profiled
+ * function.  And since GCC setup the frame for us, the previous function
+ * will be waiting there.  mmmm pie.
+ */
+ENTRY(__mcount)
+	/* save third function arg early so we can do testing below */
+	[--sp] = r2;
+
+	/* load the function pointer to the tracer */
+	p0.l = _ftrace_trace_function;
+	p0.h = _ftrace_trace_function;
+	r3 = [p0];
+
+	/* optional micro optimization: don't call the stub tracer */
+	r2.l = _ftrace_stub;
+	r2.h = _ftrace_stub;
+	cc = r2 == r3;
+	if ! cc jump .Ldo_trace;
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	/* if the ftrace_graph_return function pointer is not set to
+	 * the ftrace_stub entry, call prepare_ftrace_return().
+	 */
+	p0.l = _ftrace_graph_return;
+	p0.h = _ftrace_graph_return;
+	r3 = [p0];
+	cc = r2 == r3;
+	if ! cc jump _ftrace_graph_caller;
+
+	/* similarly, if the ftrace_graph_entry function pointer is not
+	 * set to the ftrace_graph_entry_stub entry, ...
+	 */
+	p0.l = _ftrace_graph_entry;
+	p0.h = _ftrace_graph_entry;
+	r2.l = _ftrace_graph_entry_stub;
+	r2.h = _ftrace_graph_entry_stub;
+	r3 = [p0];
+	cc = r2 == r3;
+	if ! cc jump _ftrace_graph_caller;
+#endif
+
+	r2 = [sp++];
+	rts;
+
+.Ldo_trace:
+
+	/* save first/second function arg and the return register */
+	[--sp] = r0;
+	[--sp] = r1;
+	[--sp] = rets;
+
+	/* setup the tracer function */
+	p0 = r3;
+
+	/* tracer(ulong frompc, ulong selfpc):
+	 *  frompc: the pc that did the call to ...
+	 *  selfpc: ... this location
+	 * the selfpc itself will need adjusting for the mcount call
+	 */
+	r1 = rets;
+	r0 = [fp + 4];
+	r1 += -MCOUNT_INSN_SIZE;
+
+	/* call the tracer */
+	call (p0);
+
+	/* restore state and get out of dodge */
+.Lfinish_trace:
+	rets = [sp++];
+	r1 = [sp++];
+	r0 = [sp++];
+	r2 = [sp++];
+
+.globl _ftrace_stub
+_ftrace_stub:
+	rts;
+ENDPROC(__mcount)
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+/* The prepare_ftrace_return() function is similar to the trace function
+ * except it takes a pointer to the location of the frompc.  This is so
+ * the prepare_ftrace_return() can hijack it temporarily for probing
+ * purposes.
+ */
+ENTRY(_ftrace_graph_caller)
+	/* save first/second function arg and the return register */
+	[--sp] = r0;
+	[--sp] = r1;
+	[--sp] = rets;
+
+	r0 = fp;
+	r1 = rets;
+	r0 += 4;
+	r1 += -MCOUNT_INSN_SIZE;
+	call _prepare_ftrace_return;
+
+	jump .Lfinish_trace;
+ENDPROC(_ftrace_graph_caller)
+
+/* Undo the rewrite caused by ftrace_graph_caller().  The common function
+ * ftrace_return_to_handler() will return the original rets so we can
+ * restore it and be on our way.
+ */
+ENTRY(_return_to_handler)
+	/* make sure original return values are saved */
+	[--sp] = p0;
+	[--sp] = r0;
+	[--sp] = r1;
+
+	/* get original return address */
+	call _ftrace_return_to_handler;
+	rets = r0;
+
+	/* anomaly 05000371 - make sure we have at least three instructions
+	 * between rets setting and the return
+	 */
+	r1 = [sp++];
+	r0 = [sp++];
+	p0 = [sp++];
+	rts;
+ENDPROC(_return_to_handler)
+#endif

arch/blackfin/kernel/ftrace.c

+/*
+ * ftrace graph code
+ *
+ * Copyright (C) 2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/ftrace.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <asm/atomic.h>
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+
+/*
+ * Hook the return address and push it in the stack of return addrs
+ * in current thread info.
+ */
+void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
+{
+	struct ftrace_graph_ent trace;
+	unsigned long return_hooker = (unsigned long)&return_to_handler;
+
+	if (unlikely(atomic_read(&current->tracing_graph_pause)))
+		return;
+
+	if (ftrace_push_return_trace(*parent, self_addr, &trace.depth) == -EBUSY)
+		return;
+
+	trace.func = self_addr;
+
+	/* Only trace if the calling function expects to */
+	if (!ftrace_graph_entry(&trace)) {
+		current->curr_ret_stack--;
+		return;
+	}
+
+	/* all is well in the world !  hijack RETS ... */
+	*parent = return_hooker;
+}
+
+#endif

arch/blackfin/kernel/ipipe.c

@@ -99,7 +99,7 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
 	 * interrupt.
 	 */
 	m_ack = (regs == NULL || irq == IRQ_SYSTMR || irq == IRQ_CORETMR);
-	this_domain = ipipe_current_domain;
+	this_domain = __ipipe_current_domain;
 
 	if (unlikely(test_bit(IPIPE_STICKY_FLAG, &this_domain->irqs[irq].control)))
 		head = &this_domain->p_link;
@@ -212,7 +212,9 @@ void __ipipe_unstall_root_raw(void)
 
 int __ipipe_syscall_root(struct pt_regs *regs)
 {
+	struct ipipe_percpu_domain_data *p;
 	unsigned long flags;
+	int ret;
 
 	/*
 	 * We need to run the IRQ tail hook whenever we don't
@@ -231,29 +233,31 @@ int __ipipe_syscall_root(struct pt_regs *regs)
 	/*
 	 * This routine either returns:
 	 * 0 -- if the syscall is to be passed to Linux;
-	 * 1 -- if the syscall should not be passed to Linux, and no
+	 * >0 -- if the syscall should not be passed to Linux, and no
 	 * tail work should be performed;
-	 * -1 -- if the syscall should not be passed to Linux but the
+	 * <0 -- if the syscall should not be passed to Linux but the
 	 * tail work has to be performed (for handling signals etc).
 	 */
 
-	if (__ipipe_event_monitored_p(IPIPE_EVENT_SYSCALL) &&
-	    __ipipe_dispatch_event(IPIPE_EVENT_SYSCALL, regs) > 0) {
-		if (ipipe_root_domain_p && !in_atomic()) {
-			/*
-			 * Sync pending VIRQs before _TIF_NEED_RESCHED
-			 * is tested.
-			 */
-			local_irq_save_hw(flags);
-			if ((ipipe_root_cpudom_var(irqpend_himask) & IPIPE_IRQMASK_VIRT) != 0)
-				__ipipe_sync_pipeline(IPIPE_IRQMASK_VIRT);
-			local_irq_restore_hw(flags);
-			return -1;
-		}
+	if (!__ipipe_event_monitored_p(IPIPE_EVENT_SYSCALL))
+		return 0;
+
+	ret = __ipipe_dispatch_event(IPIPE_EVENT_SYSCALL, regs);
+
+	local_irq_save_hw(flags);
+
+	if (!__ipipe_root_domain_p) {
+		local_irq_restore_hw(flags);
 		return 1;
 	}
 
-	return 0;
+	p = ipipe_root_cpudom_ptr();
+	if ((p->irqpend_himask & IPIPE_IRQMASK_VIRT) != 0)
+		__ipipe_sync_pipeline(IPIPE_IRQMASK_VIRT);
+
+	local_irq_restore_hw(flags);
+
+	return -ret;
 }
 
 unsigned long ipipe_critical_enter(void (*syncfn) (void))
@@ -329,9 +333,7 @@ asmlinkage void __ipipe_sync_root(void)
 
 void ___ipipe_sync_pipeline(unsigned long syncmask)
 {
-	struct ipipe_domain *ipd = ipipe_current_domain;
-
-	if (ipd == ipipe_root_domain) {
+	if (__ipipe_root_domain_p) {
 		if (test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)))
 			return;
 	}

arch/blackfin/kernel/setup.c

@@ -1098,7 +1098,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 			CPUID, bfin_cpuid());
 
 	seq_printf(m, "model name\t: ADSP-%s %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n"
-		"stepping\t: %d\n",
+		"stepping\t: %d ",
 		cpu, cclk/1000000, sclk/1000000,
 #ifdef CONFIG_MPU
 		"mpu on",
@@ -1107,7 +1107,16 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 #endif
 		revid);
 
-	seq_printf(m, "cpu MHz\t\t: %lu.%03lu/%lu.%03lu\n",
+	if (bfin_revid() != bfin_compiled_revid()) {
+		if (bfin_compiled_revid() == -1)
+			seq_printf(m, "(Compiled for Rev none)");
+		else if (bfin_compiled_revid() == 0xffff)
+			seq_printf(m, "(Compiled for Rev any)");
+		else
+			seq_printf(m, "(Compiled for Rev %d)", bfin_compiled_revid());
+	}
+
+	seq_printf(m, "\ncpu MHz\t\t: %lu.%03lu/%lu.%03lu\n",
 		cclk/1000000, cclk%1000000,
 		sclk/1000000, sclk%1000000);
 	seq_printf(m, "bogomips\t: %lu.%02lu\n"
@@ -1172,6 +1181,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 #ifdef __ARCH_SYNC_CORE_DCACHE
 	seq_printf(m, "SMP Dcache Flushes\t: %lu\n\n", cpudata->dcache_invld_count);
 #endif
+#ifdef __ARCH_SYNC_CORE_ICACHE
+	seq_printf(m, "SMP Icache Flushes\t: %lu\n\n", cpudata->icache_invld_count);
+#endif
 #ifdef CONFIG_BFIN_ICACHE_LOCK
 	switch ((cpudata->imemctl >> 3) & WAYALL_L) {
 	case WAY0_L:

arch/blackfin/kernel/stacktrace.c

+/*
+ * Blackfin stacktrace code (mostly copied from avr32)
+ *
+ * Copyright 2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/sched.h>
+#include <linux/stacktrace.h>
+#include <linux/thread_info.h>
+#include <linux/module.h>
+
+register unsigned long current_frame_pointer asm("FP");
+
+struct stackframe {
+	unsigned long fp;
+	unsigned long rets;
+};
+
+/*
+ * Save stack-backtrace addresses into a stack_trace buffer.
+ */
+void save_stack_trace(struct stack_trace *trace)
+{
+	unsigned long low, high;
+	unsigned long fp;
+	struct stackframe *frame;
+	int skip = trace->skip;
+
+	low = (unsigned long)task_stack_page(current);
+	high = low + THREAD_SIZE;
+	fp = current_frame_pointer;
+
+	while (fp >= low && fp <= (high - sizeof(*frame))) {
+		frame = (struct stackframe *)fp;
+
+		if (skip) {
+			skip--;
+		} else {
+			trace->entries[trace->nr_entries++] = frame->rets;
+			if (trace->nr_entries >= trace->max_entries)
+				break;
+		}
+
+		/*
+		 * The next frame must be at a higher address than the
+		 * current frame.
+		 */
+		low = fp + sizeof(*frame);
+		fp = frame->fp;
+	}
+}
+EXPORT_SYMBOL_GPL(save_stack_trace);

arch/blackfin/kernel/vmlinux.lds.S

@@ -54,6 +54,7 @@ SECTIONS
 		SCHED_TEXT
 #endif
 		LOCK_TEXT
+		IRQENTRY_TEXT
 		KPROBES_TEXT
 		*(.text.*)
 		*(.fixup)
@@ -166,6 +167,20 @@ SECTIONS
 	}
 	PERCPU(4)
 	SECURITY_INIT
+
+	/* we have to discard exit text and such at runtime, not link time, to
+	 * handle embedded cross-section references (alt instructions, bug
+	 * table, eh_frame, etc...)
+	 */
+	.exit.text :
+	{
+		EXIT_TEXT
+	}
+	.exit.data :
+	{
+		EXIT_DATA
+	}
+
 	.init.ramfs :
 	{
 		. = ALIGN(4);
@@ -264,8 +279,6 @@ SECTIONS
 
 	/DISCARD/ :
 	{
-		EXIT_TEXT
-		EXIT_DATA
 		*(.exitcall.exit)
 	}
 }

arch/blackfin/lib/checksum.c

@@ -116,6 +116,7 @@ __sum16 ip_compute_csum(const void *buff, int len)
 {
 	return (__force __sum16)~do_csum(buff, len);
 }
+EXPORT_SYMBOL(ip_compute_csum);
 
 /*
  * copy from fs while checksumming, otherwise like csum_partial
@@ -130,6 +131,7 @@ csum_partial_copy_from_user(const void __user *src, void *dst,
 	memcpy(dst, (__force void *)src, len);
 	return csum_partial(dst, len, sum);
 }
+EXPORT_SYMBOL(csum_partial_copy_from_user);
 
 /*
  * copy from ds while checksumming, otherwise like csum_partial

arch/blackfin/mach-bf518/boards/ezbrd.c

@@ -246,7 +246,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.modalias = "m25p80", /* Name of spi_driver for this device */
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0, /* Framework bus number */
-		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.chip_select = 2, /* On BF518F-EZBRD it's SPI0_SSEL2 */
 		.platform_data = &bfin_spi_flash_data,
 		.controller_data = &spi_flash_chip_info,
 		.mode = SPI_MODE_3,
@@ -369,6 +369,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI0,
 		.end   = CH_SPI0,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -399,6 +404,11 @@ static struct resource bfin_spi1_resource[] = {
 	[1] = {
 		.start = CH_SPI1,
 		.end   = CH_SPI1,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
 		.flags = IORESOURCE_IRQ,
 	},
 };

arch/blackfin/mach-bf527/boards/cm_bf527.c

@@ -664,6 +664,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	},
 };

arch/blackfin/mach-bf527/boards/ezbrd.c

@@ -467,6 +467,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	},
 };

arch/blackfin/mach-bf527/boards/ezkit.c

@@ -723,6 +723,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	},
 };

arch/blackfin/mach-bf533/boards/H8606.c

@@ -266,6 +266,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	}
 };

arch/blackfin/mach-bf533/boards/blackstamp.c

@@ -162,6 +162,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	}
 };

arch/blackfin/mach-bf533/boards/cm_bf533.c

@@ -160,6 +160,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	}
 };

arch/blackfin/mach-bf533/boards/ezkit.c

@@ -196,6 +196,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	}
 };

arch/blackfin/mach-bf533/boards/stamp.c

@@ -299,6 +299,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	}
 };

arch/blackfin/mach-bf537/boards/cm_bf537.c

@@ -182,8 +182,13 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
-	}
+	},
 };
 
 /* SPI controller data */

arch/blackfin/mach-bf537/boards/minotaur.c

@@ -184,6 +184,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	},
 };

arch/blackfin/mach-bf537/boards/pnav10.c

@@ -398,8 +398,13 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
-	}
+	},
 };
 
 /* SPI controller data */

arch/blackfin/mach-bf537/boards/stamp.c

@@ -1345,7 +1345,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
 	{
 		I2C_BOARD_INFO("pmic-adp5520", 0x32),
-		.irq = IRQ_PF7,
+		.irq = IRQ_PG0,
 		.platform_data = (void *)&adp5520_pdev_data,
 	},
 #endif

arch/blackfin/mach-bf537/boards/tcm_bf537.c

@@ -182,6 +182,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	}
 };

arch/blackfin/mach-bf538/boards/ezkit.c

@@ -352,6 +352,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI0,
 		.end   = CH_SPI0,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
 		.flags = IORESOURCE_IRQ,
 	}
 };
@@ -366,6 +371,11 @@ static struct resource bfin_spi1_resource[] = {
 	[1] = {
 		.start = CH_SPI1,
 		.end   = CH_SPI1,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
 		.flags = IORESOURCE_IRQ,
 	}
 };

arch/blackfin/mach-bf548/boards/cm_bf548.c

@@ -612,6 +612,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI0,
 		.end   = CH_SPI0,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
 		.flags = IORESOURCE_IRQ,
 	}
 };
@@ -626,6 +631,11 @@ static struct resource bfin_spi1_resource[] = {
 	[1] = {
 		.start = CH_SPI1,
 		.end   = CH_SPI1,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
 		.flags = IORESOURCE_IRQ,
 	}
 };

arch/blackfin/mach-bf548/boards/ezkit.c

@@ -396,6 +396,8 @@ static struct platform_device bfin_sir3_device = {
 #endif
 
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#include <linux/smsc911x.h>
+
 static struct resource smsc911x_resources[] = {
 	{
 		.name = "smsc911x-memory",
@@ -409,11 +411,22 @@ static struct resource smsc911x_resources[] = {
 		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 	},
 };
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.flags = SMSC911X_USE_32BIT,
+	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
 static struct platform_device smsc911x_device = {
 	.name = "smsc911x",
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smsc911x_resources),
 	.resource = smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
 };
 #endif
 
@@ -741,6 +754,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI0,
 		.end   = CH_SPI0,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
 		.flags = IORESOURCE_IRQ,
 	}
 };
@@ -755,6 +773,11 @@ static struct resource bfin_spi1_resource[] = {
 	[1] = {
 		.start = CH_SPI1,
 		.end   = CH_SPI1,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
 		.flags = IORESOURCE_IRQ,
 	}
 };

arch/blackfin/mach-bf561/boards/cm_bf561.c

@@ -177,8 +177,13 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
-	}
+	},
 };
 
 /* SPI controller data */

arch/blackfin/mach-bf561/boards/ezkit.c

@@ -304,6 +304,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	}
 };

arch/blackfin/mach-common/cache-c.c

@@ -16,9 +16,21 @@
 void blackfin_invalidate_entire_dcache(void)
 {
 	u32 dmem = bfin_read_DMEM_CONTROL();
-	SSYNC();
 	bfin_write_DMEM_CONTROL(dmem & ~0xc);
 	SSYNC();
 	bfin_write_DMEM_CONTROL(dmem);
 	SSYNC();
 }
+
+/* Invalidate the Entire Instruction cache by
+ * clearing IMC bit
+ */
+void blackfin_invalidate_entire_icache(void)
+{
+	u32 imem = bfin_read_IMEM_CONTROL();
+	bfin_write_IMEM_CONTROL(imem & ~0x4);
+	SSYNC();
+	bfin_write_IMEM_CONTROL(imem);
+	SSYNC();
+}
+

arch/blackfin/mach-common/entry.S

@@ -42,6 +42,7 @@
 #include <asm/thread_info.h>  /* TIF_NEED_RESCHED */
 #include <asm/asm-offsets.h>
 #include <asm/trace.h>
+#include <asm/traps.h>
 
 #include <asm/context.S>
 
@@ -84,13 +85,15 @@ ENTRY(_ex_workaround_261)
 	if !cc jump _bfin_return_from_exception;
 	/* fall through */
 	R7 = P4;
-	R6 = 0x26;	/* Data CPLB Miss */
+	R6 = VEC_CPLB_M;	/* Data CPLB Miss */
 	cc = R6 == R7;
 	if cc jump _ex_dcplb_miss (BP);
-	R6 = 0x23;	/* Data CPLB Miss */
+#ifdef CONFIG_MPU
+	R6 = VEC_CPLB_VL;	/* Data CPLB Violation */
 	cc = R6 == R7;
 	if cc jump _ex_dcplb_viol (BP);
-	/* Handle 0x23 Data CPLB Protection Violation
+#endif
+	/* Handle Data CPLB Protection Violation
 	 * and Data CPLB Multiple Hits - Linux Trap Zero
 	 */
 	jump _ex_trap_c;
@@ -270,7 +273,7 @@ ENTRY(_bfin_return_from_exception)
 	r6.l = lo(SEQSTAT_EXCAUSE);
 	r6.h = hi(SEQSTAT_EXCAUSE);
 	r7 = r7 & r6;
-	r6 = 0x25;
+	r6 = VEC_UNCOV;
 	CC = R7 == R6;
 	if CC JUMP _double_fault;
 #endif
@@ -1605,6 +1608,7 @@ ENTRY(_sys_call_table)
 	.long _sys_inotify_init1	/* 365 */
 	.long _sys_preadv
 	.long _sys_pwritev
+	.long _sys_rt_tgsigqueueinfo
 
 	.rept NR_syscalls-(.-_sys_call_table)/4
 	.long _sys_ni_syscall

arch/blackfin/mach-common/smp.c

@@ -144,7 +144,7 @@ static void ipi_call_function(unsigned int cpu, struct ipi_message *msg)
 
 static irqreturn_t ipi_handler(int irq, void *dev_instance)
 {
-	struct ipi_message *msg, *mg;
+	struct ipi_message *msg;
 	struct ipi_message_queue *msg_queue;
 	unsigned int cpu = smp_processor_id();
 
@@ -154,7 +154,8 @@ static irqreturn_t ipi_handler(int irq, void *dev_instance)
 	msg_queue->count++;
 
 	spin_lock(&msg_queue->lock);
-	list_for_each_entry_safe(msg, mg, &msg_queue->head, list) {
+	while (!list_empty(&msg_queue->head)) {
+		msg = list_entry(msg_queue->head.next, typeof(*msg), list);
 		list_del(&msg->list);
 		switch (msg->type) {
 		case BFIN_IPI_RESCHEDULE:
@@ -221,7 +222,7 @@ int smp_call_function(void (*func)(void *info), void *info, int wait)
 	for_each_cpu_mask(cpu, callmap) {
 		msg_queue = &per_cpu(ipi_msg_queue, cpu);
 		spin_lock_irqsave(&msg_queue->lock, flags);
-		list_add(&msg->list, &msg_queue->head);
+		list_add_tail(&msg->list, &msg_queue->head);
 		spin_unlock_irqrestore(&msg_queue->lock, flags);
 		platform_send_ipi_cpu(cpu);
 	}
@@ -261,7 +262,7 @@ int smp_call_function_single(int cpuid, void (*func) (void *info), void *info,
 
 	msg_queue = &per_cpu(ipi_msg_queue, cpu);
 	spin_lock_irqsave(&msg_queue->lock, flags);
-	list_add(&msg->list, &msg_queue->head);
+	list_add_tail(&msg->list, &msg_queue->head);
 	spin_unlock_irqrestore(&msg_queue->lock, flags);
 	platform_send_ipi_cpu(cpu);
 
@@ -292,7 +293,7 @@ void smp_send_reschedule(int cpu)
 
 	msg_queue = &per_cpu(ipi_msg_queue, cpu);
 	spin_lock_irqsave(&msg_queue->lock, flags);
-	list_add(&msg->list, &msg_queue->head);
+	list_add_tail(&msg->list, &msg_queue->head);
 	spin_unlock_irqrestore(&msg_queue->lock, flags);
 	platform_send_ipi_cpu(cpu);
 
@@ -320,7 +321,7 @@ void smp_send_stop(void)
 	for_each_cpu_mask(cpu, callmap) {
 		msg_queue = &per_cpu(ipi_msg_queue, cpu);
 		spin_lock_irqsave(&msg_queue->lock, flags);
-		list_add(&msg->list, &msg_queue->head);
+		list_add_tail(&msg->list, &msg_queue->head);
 		spin_unlock_irqrestore(&msg_queue->lock, flags);
 		platform_send_ipi_cpu(cpu);
 	}
@@ -468,6 +469,17 @@ void smp_icache_flush_range_others(unsigned long start, unsigned long end)
 }
 EXPORT_SYMBOL_GPL(smp_icache_flush_range_others);
 
+#ifdef __ARCH_SYNC_CORE_ICACHE
+void resync_core_icache(void)
+{
+	unsigned int cpu = get_cpu();
+	blackfin_invalidate_entire_icache();
+	++per_cpu(cpu_data, cpu).icache_invld_count;
+	put_cpu();
+}
+EXPORT_SYMBOL(resync_core_icache);
+#endif
+
 #ifdef __ARCH_SYNC_CORE_DCACHE
 unsigned long barrier_mask __attribute__ ((__section__(".l2.bss")));
 

drivers/spi/spi_bfin5xx.c

@@ -803,7 +803,7 @@ static void bfin_spi_pump_transfers(unsigned long data)
 				drv_data->rx, drv_data->len_in_bytes);
 
 			/* invalidate caches, if needed */
-			if (bfin_addr_dcachable((unsigned long) drv_data->rx))
+			if (bfin_addr_dcacheable((unsigned long) drv_data->rx))
 				invalidate_dcache_range((unsigned long) drv_data->rx,
 							(unsigned long) (drv_data->rx +
 							drv_data->len_in_bytes));
@@ -816,7 +816,7 @@ static void bfin_spi_pump_transfers(unsigned long data)
 			dev_dbg(&drv_data->pdev->dev, "doing DMA out.\n");
 
 			/* flush caches, if needed */
-			if (bfin_addr_dcachable((unsigned long) drv_data->tx))
+			if (bfin_addr_dcacheable((unsigned long) drv_data->tx))
 				flush_dcache_range((unsigned long) drv_data->tx,
 						(unsigned long) (drv_data->tx +
 						drv_data->len_in_bytes));