Commit 8d72b4a6 authored by Andrew Lunn's avatar Andrew Lunn Committed by Jason Cooper

ARM: Kirkwood: Convert lsxl boards to pinctrl.

Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
Tested-by: default avatarMichael Walle <michael@walle.cc>
Signed-off-by: default avatarJason Cooper <jason@lakedaemon.net>
parent d1d0c04b
/include/ "kirkwood.dtsi"
/include/ "kirkwood-6281.dtsi"
/ {
chosen {
......@@ -6,6 +7,71 @@ chosen {
};
ocp@f1000000 {
pinctrl: pinctrl@10000 {
pinctrl-0 = < &pmx_power_hdd &pmx_usb_vbus
&pmx_fan_low &pmx_fan_high
&pmx_led_function_red &pmx_led_alarm
&pmx_led_info &pmx_led_power
&pmx_fan_lock &pmx_button_function
&pmx_power_switch &pmx_power_auto_switch
&pmx_led_function_blue >;
pinctrl-names = "default";
pmx_power_hdd: pmx-power-hdd {
marvell,pins = "mpp10";
marvell,function = "gpo";
};
pmx_usb_vbus: pmx-usb-vbus {
marvell,pins = "mpp11";
marvell,function = "gpio";
};
pmx_fan_high: pmx-fan-high {
marvell,pins = "mpp18";
marvell,function = "gpo";
};
pmx_fan_low: pmx-fan-low {
marvell,pins = "mpp19";
marvell,function = "gpo";
};
pmx_led_function_blue: pmx-led-function-blue {
marvell,pins = "mpp36";
marvell,function = "gpio";
};
pmx_led_alarm: pmx-led-alarm {
marvell,pins = "mpp37";
marvell,function = "gpio";
};
pmx_led_info: pmx-led-info {
marvell,pins = "mpp38";
marvell,function = "gpio";
};
pmx_led_power: pmx-led-power {
marvell,pins = "mpp39";
marvell,function = "gpio";
};
pmx_fan_lock: pmx-fan-lock {
marvell,pins = "mpp40";
marvell,function = "gpio";
};
pmx_button_function: pmx-button-function {
marvell,pins = "mpp41";
marvell,function = "gpio";
};
pmx_power_switch: pmx-power-switch {
marvell,pins = "mpp42";
marvell,function = "gpio";
};
pmx_power_auto_switch: pmx-power-auto-switch {
marvell,pins = "mpp43";
marvell,function = "gpio";
};
pmx_led_function_red: pmx-led-function_red {
marvell,pins = "mpp48";
marvell,function = "gpio";
};
};
sata@80000 {
status = "okay";
nr-ports = <1>;
......
......@@ -20,7 +20,6 @@
#include <linux/spi/spi.h>
#include <linux/mv643xx_eth.h>
#include "common.h"
#include "mpp.h"
static struct mv643xx_eth_platform_data lsxl_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
......@@ -30,23 +29,6 @@ static struct mv643xx_eth_platform_data lsxl_ge01_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
static unsigned int lsxl_mpp_config[] __initdata = {
MPP10_GPO, /* HDD Power Enable */
MPP11_GPIO, /* USB Vbus Enable */
MPP18_GPO, /* FAN High Enable# */
MPP19_GPO, /* FAN Low Enable# */
MPP36_GPIO, /* Function Blue LED */
MPP37_GPIO, /* Alarm LED */
MPP38_GPIO, /* Info LED */
MPP39_GPIO, /* Power LED */
MPP40_GPIO, /* Fan Lock */
MPP41_GPIO, /* Function Button */
MPP42_GPIO, /* Power Switch */
MPP43_GPIO, /* Power Auto Switch */
MPP48_GPIO, /* Function Red LED */
0
};
/*
* On the LS-XHL/LS-CHLv2, the shutdown process is following:
* - Userland monitors key events until the power switch goes to off position
......@@ -65,7 +47,6 @@ void __init lsxl_init(void)
/*
* Basic setup. Needs to be called early.
*/
kirkwood_mpp_conf(lsxl_mpp_config);
kirkwood_ge00_init(&lsxl_ge00_data);
kirkwood_ge01_init(&lsxl_ge01_data);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment