Commit 8db806ec authored by Paul Mundt's avatar Paul Mundt

sh: mach-sh03: Move off of cf_enabler to pata_platform, as per landisk.

This gets rid of the cf enabler use on mach-sh03 and switches to use
pata_platform with the proper address directly. cf_enabler is
subsequently disabled for mach-sh03.
Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
parent 98a955da
...@@ -703,7 +703,7 @@ config MAPLE ...@@ -703,7 +703,7 @@ config MAPLE
config CF_ENABLER config CF_ENABLER
bool "Compact Flash Enabler support" bool "Compact Flash Enabler support"
depends on SOLUTION_ENGINE || SH_SH03 depends on SOLUTION_ENGINE
---help--- ---help---
Compact Flash is a small, removable mass storage device introduced Compact Flash is a small, removable mass storage device introduced
in 1994 originally as a PCMCIA device. If you say `Y' here, you in 1994 originally as a PCMCIA device. If you say `Y' here, you
......
...@@ -9,6 +9,7 @@ ...@@ -9,6 +9,7 @@
#include <linux/irq.h> #include <linux/irq.h>
#include <linux/pci.h> #include <linux/pci.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <asm/io.h> #include <asm/io.h>
#include <asm/rtc.h> #include <asm/rtc.h>
#include <mach-sh03/mach/io.h> #include <mach-sh03/mach/io.h>
...@@ -20,15 +21,10 @@ static void __init init_sh03_IRQ(void) ...@@ -20,15 +21,10 @@ static void __init init_sh03_IRQ(void)
plat_irq_setup_pins(IRQ_MODE_IRQ); plat_irq_setup_pins(IRQ_MODE_IRQ);
} }
extern void *cf_io_base;
static void __iomem *sh03_ioport_map(unsigned long port, unsigned int size) static void __iomem *sh03_ioport_map(unsigned long port, unsigned int size)
{ {
if (PXSEG(port)) if (PXSEG(port))
return (void __iomem *)port; return (void __iomem *)port;
/* CompactFlash (IDE) */
if (((port >= 0x1f0) && (port <= 0x1f7)) || (port == 0x3f6))
return (void __iomem *)((unsigned long)cf_io_base + port);
return (void __iomem *)(port + PCI_IO_BASE); return (void __iomem *)(port + PCI_IO_BASE);
} }
...@@ -41,6 +37,15 @@ static void __init sh03_setup(char **cmdline_p) ...@@ -41,6 +37,15 @@ static void __init sh03_setup(char **cmdline_p)
board_time_init = sh03_time_init; board_time_init = sh03_time_init;
} }
static struct resource cf_ide_resources[3];
static struct platform_device cf_ide_device = {
.name = "pata_platform",
.id = -1,
.num_resources = ARRAY_SIZE(cf_ide_resources),
.resource = cf_ide_resources,
};
static struct resource heartbeat_resources[] = { static struct resource heartbeat_resources[] = {
[0] = { [0] = {
.start = 0xa0800000, .start = 0xa0800000,
...@@ -58,10 +63,34 @@ static struct platform_device heartbeat_device = { ...@@ -58,10 +63,34 @@ static struct platform_device heartbeat_device = {
static struct platform_device *sh03_devices[] __initdata = { static struct platform_device *sh03_devices[] __initdata = {
&heartbeat_device, &heartbeat_device,
&cf_ide_device,
}; };
static int __init sh03_devices_setup(void) static int __init sh03_devices_setup(void)
{ {
pgprot_t prot;
unsigned long paddrbase;
void *cf_ide_base;
/* open I/O area window */
paddrbase = virt_to_phys((void *)PA_AREA5_IO);
prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
cf_ide_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
if (!cf_ide_base) {
printk("allocate_cf_area : can't open CF I/O window!\n");
return -ENOMEM;
}
/* IDE cmd address : 0x1f0-0x1f7 and 0x3f6 */
cf_ide_resources[0].start = (unsigned long)cf_ide_base + 0x40;
cf_ide_resources[0].end = (unsigned long)cf_ide_base + 0x40 + 0x0f;
cf_ide_resources[0].flags = IORESOURCE_IO;
cf_ide_resources[1].start = (unsigned long)cf_ide_base + 0x2c;
cf_ide_resources[1].end = (unsigned long)cf_ide_base + 0x2c + 0x03;
cf_ide_resources[1].flags = IORESOURCE_IO;
cf_ide_resources[2].start = IRQ_FATA;
cf_ide_resources[2].flags = IORESOURCE_IRQ;
return platform_add_devices(sh03_devices, ARRAY_SIZE(sh03_devices)); return platform_add_devices(sh03_devices, ARRAY_SIZE(sh03_devices));
} }
__initcall(sh03_devices_setup); __initcall(sh03_devices_setup);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment