spi: rspi: Fix interrupted DMA transfers

When interrupted, wait_event_interruptible_timeout() returns
-ERESTARTSYS, and the SPI transfer in progress will fail, as expected:

    m25p80 spi0.0: SPI transfer failed: -512
    spi_master spi0: failed to transfer one message from queue

However, as the underlying DMA transfers may not have completed, all
subsequent SPI transfers may start to fail:

    spi_master spi0: receive timeout
    qspi_transfer_out_in() returned -110
    m25p80 spi0.0: SPI transfer failed: -110
    spi_master spi0: failed to transfer one message from queue

Fix this by calling dmaengine_terminate_all() not only for timeouts, but
also for errors.

This can be reproduced on r8a7991/koelsch, using "hd /dev/mtd0" followed
by CTRL-C.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

drivers/spi/spi-rspi.c

@@ -598,11 +598,13 @@ static int rspi_dma_transfer(struct rspi_data *rspi, struct sg_table *tx,
 
 	ret = wait_event_interruptible_timeout(rspi->wait,
 					       rspi->dma_callbacked, HZ);
-	if (ret > 0 && rspi->dma_callbacked)
+	if (ret > 0 && rspi->dma_callbacked) {
 		ret = 0;
-	else if (!ret) {
-		dev_err(&rspi->master->dev, "DMA timeout\n");
-		ret = -ETIMEDOUT;
+	} else {
+		if (!ret) {
+			dev_err(&rspi->master->dev, "DMA timeout\n");
+			ret = -ETIMEDOUT;
+		}
 		if (tx)
 			dmaengine_terminate_all(rspi->master->dma_tx);
 		if (rx)