Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull non-critical arm-soc bug fixes from Olof Johansson:
 "These bug fixes were not important enough to have them included in the
  v3.4 release, mostly because they cover harmless warnings or
  unrealistic configurations.  Instead we queue them up to be picked up
  in the next merge window."

Fixed up trivial conflict in arch/arm/mach-omap2/board-omap4panda.c

* tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: spear6xx: remove board selection options
  ARM: OMAP: igep0020: Specify the VPLL2 regulator unconditionally
  ARM: OMAP2+: INTC: fix Kconfig option for TI81XX
  ARM: OMAP2+: remove incorrect irq_chip ack field
  ARM: OMAP4: Adding ID for OMAP4460 ES1.1
  ARM: OMAP4: panda: add statics to remove warnings
  ARM: OMAP2+: Incorrect Register Offsets in OMAP Mailbox
  ARM: OMAP: fix trivial warnings for dspbridge
  arm: davinci: use for_each_set_bit_from
  ARM: OMAP4: hsmmc: check for null pointer
  ARM: OMAP1: fix compilation issue in board-sx1.c
  ARM: disable SUSPEND/ARCH_SUSPEND_POSSIBLE for ARCH_TEGRA
  ARM: davinci: da850-evm: fix section mismatch
  ARM: tegra: add pll_x freq table entry for 750MHz
  ARM: davinci: mark spi_board_info arguments as const
  ARM: davinci: fix incorrect pdctl next bit position

arch/arm/Kconfig

@@ -2253,7 +2253,7 @@ menu "Power management options"
 source "kernel/power/Kconfig"
 
 config ARCH_SUSPEND_POSSIBLE
-	depends on !ARCH_S5PC100
+	depends on !ARCH_S5PC100 && !ARCH_TEGRA
 	depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \
 		CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE
 	def_bool y

arch/arm/mach-davinci/board-da850-evm.c

@@ -284,7 +284,7 @@ static struct platform_device da850_evm_nandflash_device = {
 	.resource	= da850_evm_nandflash_resource,
 };
 
-static struct platform_device *da850_evm_devices[] __initdata = {
+static struct platform_device *da850_evm_devices[] = {
 	&da850_evm_nandflash_device,
 	&da850_evm_norflash_device,
 };

arch/arm/mach-davinci/davinci.h

@@ -72,7 +72,7 @@ void davinci_map_sysmod(void);
 /* DM355 function declarations */
 void __init dm355_init(void);
 void dm355_init_spi0(unsigned chipselect_mask,
-		struct spi_board_info *info, unsigned len);
+		const struct spi_board_info *info, unsigned len);
 void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata);
 void dm355_set_vpfe_config(struct vpfe_config *cfg);
 
@@ -83,7 +83,7 @@ void __init dm365_init_vc(struct snd_platform_data *pdata);
 void __init dm365_init_ks(struct davinci_ks_platform_data *pdata);
 void __init dm365_init_rtc(void);
 void dm365_init_spi0(unsigned chipselect_mask,
-			struct spi_board_info *info, unsigned len);
+			const struct spi_board_info *info, unsigned len);
 void dm365_set_vpfe_config(struct vpfe_config *cfg);
 
 /* DM644x function declarations */

arch/arm/mach-davinci/devices-da8xx.c

@@ -831,7 +831,7 @@ static struct platform_device da8xx_spi_device[] = {
 	},
 };
 
-int __init da8xx_register_spi(int instance, struct spi_board_info *info,
+int __init da8xx_register_spi(int instance, const struct spi_board_info *info,
 			      unsigned len)
 {
 	int ret;

arch/arm/mach-davinci/dm355.c

@@ -424,7 +424,7 @@ static struct platform_device dm355_spi0_device = {
 };
 
 void __init dm355_init_spi0(unsigned chipselect_mask,
-		struct spi_board_info *info, unsigned len)
+		const struct spi_board_info *info, unsigned len)
 {
 	/* for now, assume we need MISO */
 	davinci_cfg_reg(DM355_SPI0_SDI);

arch/arm/mach-davinci/dm365.c

@@ -676,7 +676,7 @@ static struct platform_device dm365_spi0_device = {
 };
 
 void __init dm365_init_spi0(unsigned chipselect_mask,
-		struct spi_board_info *info, unsigned len)
+		const struct spi_board_info *info, unsigned len)
 {
 	davinci_cfg_reg(DM365_SPI0_SCLK);
 	davinci_cfg_reg(DM365_SPI0_SDI);

arch/arm/mach-davinci/dma.c

@@ -557,9 +557,9 @@ static int reserve_contiguous_slots(int ctlr, unsigned int id,
 	if (i == edma_cc[ctlr]->num_slots)
 		stop_slot = i;
 
-	for (j = start_slot; j < stop_slot; j++)
-		if (test_bit(j, tmp_inuse))
-			clear_bit(j, edma_cc[ctlr]->edma_inuse);
+	j = start_slot;
+	for_each_set_bit_from(j, tmp_inuse, stop_slot)
+		clear_bit(j, edma_cc[ctlr]->edma_inuse);
 
 	if (count)
 		return -EBUSY;

arch/arm/mach-davinci/include/mach/da8xx.h

@@ -76,7 +76,8 @@ void __init da850_init(void);
 int da830_register_edma(struct edma_rsv_info *rsv);
 int da850_register_edma(struct edma_rsv_info *rsv[2]);
 int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata);
-int da8xx_register_spi(int instance, struct spi_board_info *info, unsigned len);
+int da8xx_register_spi(int instance,
+		const struct spi_board_info *info, unsigned len);
 int da8xx_register_watchdog(void);
 int da8xx_register_usb20(unsigned mA, unsigned potpgt);
 int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata);

arch/arm/mach-davinci/include/mach/psc.h

@@ -246,7 +246,7 @@
 #define MDSTAT_STATE_MASK	0x3f
 #define PDSTAT_STATE_MASK	0x1f
 #define MDCTL_FORCE		BIT(31)
-#define PDCTL_NEXT		BIT(1)
+#define PDCTL_NEXT		BIT(0)
 #define PDCTL_EPCGOOD		BIT(8)
 
 #ifndef __ASSEMBLER__

arch/arm/mach-omap1/Kconfig

@@ -132,6 +132,7 @@ config MACH_OMAP_PALMTT
 
 config MACH_SX1
 	bool "Siemens SX1"
+	select I2C
 	depends on ARCH_OMAP1 && ARCH_OMAP15XX
 	help
 	  Support for the Siemens SX1 phone. To boot the kernel,

arch/arm/mach-omap2/board-4430sdp.c

@@ -489,50 +489,6 @@ static struct platform_device omap_vwlan_device = {
 	},
 };
 
-static int omap4_twl6030_hsmmc_late_init(struct device *dev)
-{
-	int irq = 0;
-	struct platform_device *pdev = container_of(dev,
-				struct platform_device, dev);
-	struct omap_mmc_platform_data *pdata = dev->platform_data;
-
-	/* Setting MMC1 Card detect Irq */
-	if (pdev->id == 0) {
-		irq = twl6030_mmc_card_detect_config();
-		if (irq < 0) {
-			pr_err("Failed configuring MMC1 card detect\n");
-			return irq;
-		}
-		pdata->slots[0].card_detect_irq = irq;
-		pdata->slots[0].card_detect = twl6030_mmc_card_detect;
-	}
-	return 0;
-}
-
-static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
-{
-	struct omap_mmc_platform_data *pdata;
-
-	/* dev can be null if CONFIG_MMC_OMAP_HS is not set */
-	if (!dev) {
-		pr_err("Failed %s\n", __func__);
-		return;
-	}
-	pdata = dev->platform_data;
-	pdata->init =	omap4_twl6030_hsmmc_late_init;
-}
-
-static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
-{
-	struct omap2_hsmmc_info *c;
-
-	omap_hsmmc_init(controllers);
-	for (c = controllers; c->mmc; c++)
-		omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
-
-	return 0;
-}
-
 static struct regulator_init_data sdp4430_vaux1 = {
 	.constraints = {
 		.min_uV			= 1000000,

arch/arm/mach-omap2/board-igep0020.c

@@ -519,7 +519,10 @@ static void __init igep_i2c_init(void)
 {
 	int ret;
 
-	omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB, 0);
+	omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB,
+			      TWL_COMMON_REGULATOR_VPLL2);
+	igep_twldata.vpll2->constraints.apply_uV = true;
+	igep_twldata.vpll2->constraints.name = "VDVI";
 
 	if (machine_is_igep0020()) {
 		/*
@@ -533,10 +536,7 @@ static void __init igep_i2c_init(void)
 
 		igep_twldata.keypad	= &igep2_keypad_pdata;
 		/* Get common pmic data */
-		omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO,
-				      TWL_COMMON_REGULATOR_VPLL2);
-		igep_twldata.vpll2->constraints.apply_uV = true;
-		igep_twldata.vpll2->constraints.name = "VDVI";
+		omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO, 0);
 	}
 
 	omap3_pmic_init("twl4030", &igep_twldata);

arch/arm/mach-omap2/board-omap4panda.c

@@ -236,55 +236,6 @@ static struct wl12xx_platform_data omap_panda_wlan_data  __initdata = {
 	.board_ref_clock = 2,
 };
 
-static int omap4_twl6030_hsmmc_late_init(struct device *dev)
-{
-	int irq = 0;
-	struct platform_device *pdev = container_of(dev,
-				struct platform_device, dev);
-	struct omap_mmc_platform_data *pdata = dev->platform_data;
-
-	if (!pdata) {
-		dev_err(dev, "%s: NULL platform data\n", __func__);
-		return -EINVAL;
-	}
-	/* Setting MMC1 Card detect Irq */
-	if (pdev->id == 0) {
-		irq = twl6030_mmc_card_detect_config();
-		if (irq < 0) {
-			dev_err(dev, "%s: Error card detect config(%d)\n",
-				__func__, irq);
-			return irq;
-		}
-		pdata->slots[0].card_detect = twl6030_mmc_card_detect;
-	}
-	return 0;
-}
-
-static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
-{
-	struct omap_mmc_platform_data *pdata;
-
-	/* dev can be null if CONFIG_MMC_OMAP_HS is not set */
-	if (!dev) {
-		pr_err("Failed omap4_twl6030_hsmmc_set_late_init\n");
-		return;
-	}
-	pdata = dev->platform_data;
-
-	pdata->init =	omap4_twl6030_hsmmc_late_init;
-}
-
-static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
-{
-	struct omap2_hsmmc_info *c;
-
-	omap_hsmmc_init(controllers);
-	for (c = controllers; c->mmc; c++)
-		omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
-
-	return 0;
-}
-
 static struct twl6040_codec_data twl6040_codec = {
 	/* single-step ramp for headset and handsfree */
 	.hs_left_step	= 0x0f,

arch/arm/mach-omap2/common.h

@@ -27,6 +27,7 @@
 #ifndef __ASSEMBLER__
 
 #include <linux/delay.h>
+#include <linux/i2c/twl.h>
 #include <plat/common.h>
 #include <asm/proc-fns.h>
 
@@ -252,6 +253,8 @@ static inline u32 omap4_mpuss_read_prev_context_state(void)
 struct omap_sdrc_params;
 extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 				      struct omap_sdrc_params *sdrc_cs1);
+struct omap2_hsmmc_info;
+extern int omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers);
 
 #endif /* __ASSEMBLER__ */
 #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */

arch/arm/mach-omap2/dsp.c

@@ -57,8 +57,9 @@ static int __init omap_dsp_init(void)
 
 	if (pdata->phys_mempool_base) {
 		pdata->phys_mempool_size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE;
-		pr_info("%s: %x bytes @ %x\n", __func__,
-			pdata->phys_mempool_size, pdata->phys_mempool_base);
+		pr_info("%s: %llx bytes @ %llx\n", __func__,
+			(unsigned long long)pdata->phys_mempool_size,
+			(unsigned long long)pdata->phys_mempool_base);
 	}
 
 	pdev = platform_device_alloc("omap-dsp", -1);

arch/arm/mach-omap2/id.c

@@ -478,9 +478,12 @@ void __init omap4xxx_check_revision(void)
 	case 0xb94e:
 		switch (rev) {
 		case 0:
-		default:
 			omap_revision = OMAP4460_REV_ES1_0;
 			break;
+		case 2:
+		default:
+			omap_revision = OMAP4460_REV_ES1_1;
+			break;
 		}
 		break;
 	case 0xb975:

arch/arm/mach-omap2/irq.c

@@ -150,7 +150,6 @@ omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
 	ct->chip.irq_mask = irq_gc_mask_disable_reg;
 	ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
 
-	ct->regs.ack = INTC_CONTROL;
 	ct->regs.enable = INTC_MIR_CLEAR0;
 	ct->regs.disable = INTC_MIR_SET0;
 	irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
@@ -232,7 +231,7 @@ static inline void omap_intc_handle_irq(void __iomem *base_addr, struct pt_regs
 			goto out;
 
 		irqnr = readl_relaxed(base_addr + 0xd8);
-#ifdef CONFIG_SOC_OMAPTI816X
+#ifdef CONFIG_SOC_OMAPTI81XX
 		if (irqnr)
 			goto out;
 		irqnr = readl_relaxed(base_addr + 0xf8);

arch/arm/mach-omap2/mailbox.c

@@ -26,9 +26,9 @@
 #define MAILBOX_IRQSTATUS(u)		(0x100 + 8 * (u))
 #define MAILBOX_IRQENABLE(u)		(0x104 + 8 * (u))
 
-#define OMAP4_MAILBOX_IRQSTATUS(u)	(0x104 + 10 * (u))
-#define OMAP4_MAILBOX_IRQENABLE(u)	(0x108 + 10 * (u))
-#define OMAP4_MAILBOX_IRQENABLE_CLR(u)	(0x10c + 10 * (u))
+#define OMAP4_MAILBOX_IRQSTATUS(u)	(0x104 + 0x10 * (u))
+#define OMAP4_MAILBOX_IRQENABLE(u)	(0x108 + 0x10 * (u))
+#define OMAP4_MAILBOX_IRQENABLE_CLR(u)	(0x10c + 0x10 * (u))
 
 #define MAILBOX_IRQ_NEWMSG(m)		(1 << (2 * (m)))
 #define MAILBOX_IRQ_NOTFULL(m)		(1 << (2 * (m) + 1))

arch/arm/mach-omap2/omap4-common.c

@@ -25,11 +25,13 @@
 #include <plat/irqs.h>
 #include <plat/sram.h>
 #include <plat/omap-secure.h>
+#include <plat/mmc.h>
 
 #include <mach/hardware.h>
 #include <mach/omap-wakeupgen.h>
 
 #include "common.h"
+#include "hsmmc.h"
 #include "omap4-sar-layout.h"
 #include <linux/export.h>
 
@@ -207,3 +209,59 @@ static int __init omap4_sar_ram_init(void)
 	return 0;
 }
 early_initcall(omap4_sar_ram_init);
+
+#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+static int omap4_twl6030_hsmmc_late_init(struct device *dev)
+{
+	int irq = 0;
+	struct platform_device *pdev = container_of(dev,
+				struct platform_device, dev);
+	struct omap_mmc_platform_data *pdata = dev->platform_data;
+
+	/* Setting MMC1 Card detect Irq */
+	if (pdev->id == 0) {
+		irq = twl6030_mmc_card_detect_config();
+		if (irq < 0) {
+			dev_err(dev, "%s: Error card detect config(%d)\n",
+				__func__, irq);
+			return irq;
+		}
+		pdata->slots[0].card_detect_irq = irq;
+		pdata->slots[0].card_detect = twl6030_mmc_card_detect;
+	}
+	return 0;
+}
+
+static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
+{
+	struct omap_mmc_platform_data *pdata;
+
+	/* dev can be null if CONFIG_MMC_OMAP_HS is not set */
+	if (!dev) {
+		pr_err("Failed %s\n", __func__);
+		return;
+	}
+	pdata = dev->platform_data;
+	pdata->init =	omap4_twl6030_hsmmc_late_init;
+}
+
+int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
+{
+	struct omap2_hsmmc_info *c;
+
+	omap_hsmmc_init(controllers);
+	for (c = controllers; c->mmc; c++) {
+		/* pdev can be null if CONFIG_MMC_OMAP_HS is not set */
+		if (!c->pdev)
+			continue;
+		omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
+	}
+
+	return 0;
+}
+#else
+int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
+{
+	return 0;
+}
+#endif

arch/arm/mach-spear6xx/Kconfig

@@ -2,21 +2,9 @@
 # SPEAr6XX Machine configuration file
 #
 
-if ARCH_SPEAR6XX
-
-menu "SPEAr6xx Implementations"
-config BOARD_SPEAR600_DT
-	bool "SPEAr600 generic board configured via device-tree"
-	select MACH_SPEAR600
+config MACH_SPEAR600
+	def_bool y
+	depends on ARCH_SPEAR6XX
 	select USE_OF
 	help
 	  Supports ST SPEAr600 boards configured via the device-tree
-
-endmenu
-
-config MACH_SPEAR600
-	bool "SPEAr600"
-	help
-	  Supports ST SPEAr600 Machine
-
-endif #ARCH_SPEAR6XX

arch/arm/mach-tegra/tegra2_clocks.c

@@ -1764,6 +1764,12 @@ static struct clk_pll_freq_table tegra_pll_x_freq_table[] = {
 	{ 19200000, 760000000,  950,  24, 1, 8},
 	{ 26000000, 760000000,  760,  26, 1, 12},
 
+	/* 750 MHz */
+	{ 12000000, 750000000,  750,  12, 1, 12},
+	{ 13000000, 750000000,  750,  13, 1, 12},
+	{ 19200000, 750000000,  625,  16, 1, 8},
+	{ 26000000, 750000000,  750,  26, 1, 12},
+
 	/* 608 MHz */
 	{ 12000000, 608000000,  608,  12, 1, 12},
 	{ 13000000, 608000000,  608,  13, 1, 12},

arch/arm/plat-omap/devices.c

@@ -167,8 +167,8 @@ void __init omap_dsp_reserve_sdram_memblock(void)
 
 	paddr = arm_memblock_steal(size, SZ_1M);
 	if (!paddr) {
-		pr_err("%s: failed to reserve %x bytes\n",
-				__func__, size);
+		pr_err("%s: failed to reserve %llx bytes\n",
+				__func__, (unsigned long long)size);
 		return;
 	}
 

arch/arm/plat-omap/include/plat/cpu.h

@@ -445,6 +445,7 @@ IS_OMAP_TYPE(3517, 0x3517)
 
 #define OMAP446X_CLASS		0x44600044
 #define OMAP4460_REV_ES1_0	(OMAP446X_CLASS | (0x10 << 8))
+#define OMAP4460_REV_ES1_1	(OMAP446X_CLASS | (0x11 << 8))
 
 #define OMAP447X_CLASS		0x44700044
 #define OMAP4470_REV_ES1_0	(OMAP447X_CLASS | (0x10 << 8))