Commit 8dd51e23 authored by Sascha Hauer's avatar Sascha Hauer Committed by Mark Brown

ASoC: fsl-ssi: set bitclock in master mode from hw_params

The fsl_ssi driver uses the .set_sysclk callback to configure the
bitclock for master mode. This is unnecessary since the bitclock
is known in hw_params. This patch configures the bitclock from .hw_params.
.set_dai_sysclk now sets a bitclock frequency which is preferred over
the default calculated bitclock frequency.
Signed-off-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: default avatarMarkus Pargmann <mpa@pengutronix.de>
Tested-By: default avatarMichael Grzeschik <mgr@pengutronix.de>
Signed-off-by: default avatarMark Brown <broonie@linaro.org>
parent 85e59af2
......@@ -166,6 +166,7 @@ struct fsl_ssi_private {
spinlock_t baudclk_lock;
struct clk *baudclk;
struct clk *clk;
unsigned int bitclk_freq;
struct snd_dmaengine_dai_dma_data dma_params_tx;
struct snd_dmaengine_dai_dma_data dma_params_rx;
struct imx_pcm_fiq_params fiq_params;
......@@ -236,6 +237,12 @@ static bool fsl_ssi_is_ac97(struct fsl_ssi_private *ssi_private)
return !!(ssi_private->dai_fmt & SND_SOC_DAIFMT_AC97);
}
static bool fsl_ssi_is_i2s_master(struct fsl_ssi_private *ssi_private)
{
return (ssi_private->dai_fmt & SND_SOC_DAIFMT_MASTER_MASK) ==
SND_SOC_DAIFMT_CBS_CFS;
}
/**
* fsl_ssi_isr: SSI interrupt handler
*
......@@ -509,7 +516,7 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream,
}
/**
* fsl_ssi_set_dai_sysclk - configure Digital Audio Interface bit clock
* fsl_ssi_set_bclk - configure Digital Audio Interface bit clock
*
* Note: This function can be only called when using SSI as DAI master
*
......@@ -517,8 +524,9 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream,
* freq: Output BCLK frequency = samplerate * 32 (fixed) * channels
* dir: SND_SOC_CLOCK_OUT -> TxBCLK, SND_SOC_CLOCK_IN -> RxBCLK.
*/
static int fsl_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
int clk_id, unsigned int freq, int dir)
static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream,
struct snd_soc_dai *cpu_dai,
struct snd_pcm_hw_params *hw_params)
{
struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(cpu_dai);
struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
......@@ -526,6 +534,13 @@ static int fsl_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
u32 pm = 999, div2, psr, stccr, mask, afreq, factor, i;
unsigned long flags, clkrate, baudrate, tmprate;
u64 sub, savesub = 100000;
unsigned int freq;
/* Prefer the explicitly set bitclock frequency */
if (ssi_private->bitclk_freq)
freq = ssi_private->bitclk_freq;
else
freq = params_channels(hw_params) * 32 * params_rate(hw_params);
/* Don't apply it to any non-baudclk circumstance */
if (IS_ERR(ssi_private->baudclk))
......@@ -583,7 +598,7 @@ static int fsl_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
mask = CCSR_SSI_SxCCR_PM_MASK | CCSR_SSI_SxCCR_DIV2 |
CCSR_SSI_SxCCR_PSR;
if (dir == SND_SOC_CLOCK_OUT || synchronous)
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK || synchronous)
write_ssi_mask(&ssi->stccr, mask, stccr);
else
write_ssi_mask(&ssi->srccr, mask, stccr);
......@@ -604,6 +619,16 @@ static int fsl_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
return 0;
}
static int fsl_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
int clk_id, unsigned int freq, int dir)
{
struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(cpu_dai);
ssi_private->bitclk_freq = freq;
return 0;
}
/**
* fsl_ssi_hw_params - program the sample size
*
......@@ -627,6 +652,7 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream,
snd_pcm_format_width(params_format(hw_params));
u32 wl = CCSR_SSI_SxCCR_WL(sample_size);
int enabled = read_ssi(&ssi->scr) & CCSR_SSI_SCR_SSIEN;
int ret;
/*
* If we're in synchronous mode, and the SSI is already enabled,
......@@ -635,6 +661,12 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream,
if (enabled && ssi_private->cpu_dai_drv.symmetric_rates)
return 0;
if (fsl_ssi_is_i2s_master(ssi_private)) {
ret = fsl_ssi_set_bclk(substream, cpu_dai, hw_params);
if (ret)
return ret;
}
/*
* FIXME: The documentation says that SxCCR[WL] should not be
* modified while the SSI is enabled. The only time this can
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment