Commit 8df4538e authored by Stefan Roese's avatar Stefan Roese Committed by Jeff Garzik

ibm_newemac: Add ET1011c PHY support

This adds support for the Agere ET1011c PHY as found on the AMCC Taishan
board.
Signed-off-by: default avatarStefan Roese <sr@denx.de>
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent f1f304f2
......@@ -327,6 +327,42 @@ static int m88e1111_init(struct mii_phy *phy)
return 0;
}
static int et1011c_init(struct mii_phy *phy)
{
u16 reg_short;
reg_short = (u16)(phy_read(phy, 0x16));
reg_short &= ~(0x7);
reg_short |= 0x6; /* RGMII Trace Delay*/
phy_write(phy, 0x16, reg_short);
reg_short = (u16)(phy_read(phy, 0x17));
reg_short &= ~(0x40);
phy_write(phy, 0x17, reg_short);
phy_write(phy, 0x1c, 0x74f0);
return 0;
}
static struct mii_phy_ops et1011c_phy_ops = {
.init = et1011c_init,
.setup_aneg = genmii_setup_aneg,
.setup_forced = genmii_setup_forced,
.poll_link = genmii_poll_link,
.read_link = genmii_read_link
};
static struct mii_phy_def et1011c_phy_def = {
.phy_id = 0x0282f000,
.phy_id_mask = 0x0fffff00,
.name = "ET1011C Gigabit Ethernet",
.ops = &et1011c_phy_ops
};
static struct mii_phy_ops m88e1111_phy_ops = {
.init = m88e1111_init,
.setup_aneg = genmii_setup_aneg,
......@@ -344,6 +380,7 @@ static struct mii_phy_def m88e1111_phy_def = {
};
static struct mii_phy_def *mii_phy_table[] = {
&et1011c_phy_def,
&cis8201_phy_def,
&bcm5248_phy_def,
&m88e1111_phy_def,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment