Commit 8f49720d authored by Thomas Abraham's avatar Thomas Abraham Committed by Kukjin Kim

ARM: S5PV210: Add frame buffer display support for SMDKV210

Enable frame buffer display support for SMDKV210 board.
Signed-off-by: default avatarThomas Abraham <thomas.ab@samsung.com>
Reviewed-by: default avatarJonghun Han <jonghun.han@samsung.com>
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
parent 387c31c7
......@@ -118,6 +118,7 @@ menu "S5PV210 Machines"
config MACH_SMDKV210
bool "SMDKV210"
select CPU_S5PV210
select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
......@@ -130,6 +131,7 @@ config MACH_SMDKV210
select SAMSUNG_DEV_IDE
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_TS
select S5PV210_SETUP_FB_24BPP
select S5PV210_SETUP_I2C1
select S5PV210_SETUP_I2C2
select S5PV210_SETUP_IDE
......
......@@ -14,14 +14,20 @@
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/sysdev.h>
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <video/platform_lcd.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <mach/regs-fb.h>
#include <plat/regs-serial.h>
#include <plat/s5pv210.h>
......@@ -33,6 +39,7 @@
#include <plat/iic.h>
#include <plat/keypad.h>
#include <plat/pm.h>
#include <plat/fb.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
......@@ -102,12 +109,76 @@ static struct samsung_keypad_platdata smdkv210_keypad_data __initdata = {
.cols = 8,
};
static void smdkv210_lte480wv_set_power(struct plat_lcd_data *pd,
unsigned int power)
{
if (power) {
#if !defined(CONFIG_BACKLIGHT_PWM)
gpio_request(S5PV210_GPD0(3), "GPD0");
gpio_direction_output(S5PV210_GPD0(3), 1);
gpio_free(S5PV210_GPD0(3));
#endif
/* fire nRESET on power up */
gpio_request(S5PV210_GPH0(6), "GPH0");
gpio_direction_output(S5PV210_GPH0(6), 1);
gpio_set_value(S5PV210_GPH0(6), 0);
mdelay(10);
gpio_set_value(S5PV210_GPH0(6), 1);
mdelay(10);
gpio_free(S5PV210_GPH0(6));
} else {
#if !defined(CONFIG_BACKLIGHT_PWM)
gpio_request(S5PV210_GPD0(3), "GPD0");
gpio_direction_output(S5PV210_GPD0(3), 0);
gpio_free(S5PV210_GPD0(3));
#endif
}
}
static struct plat_lcd_data smdkv210_lcd_lte480wv_data = {
.set_power = smdkv210_lte480wv_set_power,
};
static struct platform_device smdkv210_lcd_lte480wv = {
.name = "platform-lcd",
.dev.parent = &s3c_device_fb.dev,
.dev.platform_data = &smdkv210_lcd_lte480wv_data,
};
static struct s3c_fb_pd_win smdkv210_fb_win0 = {
.win_mode = {
.left_margin = 13,
.right_margin = 8,
.upper_margin = 7,
.lower_margin = 5,
.hsync_len = 3,
.vsync_len = 1,
.xres = 800,
.yres = 480,
},
.max_bpp = 32,
.default_bpp = 24,
};
static struct s3c_fb_platdata smdkv210_lcd0_pdata __initdata = {
.win[0] = &smdkv210_fb_win0,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
.setup_gpio = s5pv210_fb_gpio_setup_24bpp,
};
static struct platform_device *smdkv210_devices[] __initdata = {
&s5pv210_device_iis0,
&s5pv210_device_ac97,
&s5pv210_device_spdif,
&s3c_device_adc,
&s3c_device_cfcon,
&s3c_device_fb,
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
&s3c_device_hsmmc2,
......@@ -119,6 +190,7 @@ static struct platform_device *smdkv210_devices[] __initdata = {
&s3c_device_rtc,
&s3c_device_ts,
&s3c_device_wdt,
&smdkv210_lcd_lte480wv,
};
static struct i2c_board_info smdkv210_i2c_devs0[] __initdata = {
......@@ -165,6 +237,8 @@ static void __init smdkv210_machine_init(void)
s3c_ide_set_platdata(&smdkv210_ide_pdata);
s3c_fb_set_platdata(&smdkv210_lcd0_pdata);
platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment