Commit 8fd26859 authored by Chris Wilson's avatar Chris Wilson

drm/i915: Enable RC6 autodownclocking on Sandybridge

Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
parent eb43f4af
......@@ -283,6 +283,7 @@
#define RING_CTL(base) ((base)+0x3c)
#define RING_SYNC_0(base) ((base)+0x40)
#define RING_SYNC_1(base) ((base)+0x44)
#define RING_MAX_IDLE(base) ((base)+0x54)
#define RING_HWS_PGA(base) ((base)+0x80)
#define RING_HWS_PGA_GEN6(base) ((base)+0x2080)
#define RING_ACTHD(base) ((base)+0x74)
......@@ -3116,4 +3117,62 @@
#define FORCEWAKE 0xA18C
#define FORCEWAKE_ACK 0x130090
#define GEN6_RC_NORMAL_FREQ 0xA008
#define GEN6_TURBO_DISABLE (1<<31)
#define GEN6_FREQUENCY(x) ((x)<<25)
#define GEN6_OFFSET(x) ((x)<<19)
#define GEN6_AGGRESSIVE_TURBO (0<<15)
#define GEN6_RC_VIDEO_FREQ 0xA00C
#define GEN6_RC_CONTROL 0xA090
#define GEN6_RC_CTL_RC6pp_ENABLE (1<<16)
#define GEN6_RC_CTL_RC6p_ENABLE (1<<17)
#define GEN6_RC_CTL_RC6_ENABLE (1<<18)
#define GEN6_RC_CTL_RC1e_ENABLE (1<<20)
#define GEN6_RC_CTL_RC7_ENABLE (1<<22)
#define GEN6_RC_CTL_EI_MODE(x) ((x)<<27)
#define GEN6_RC_CTL_HW_ENABLE (1<<31)
#define GEN6_RP_DOWN_TIMEOUT 0xA010
#define GEN6_RP_INTERRUPT_LIMITS 0xA014
#define GEN6_RP_CONTROL 0xA024
#define GEN6_RP_MEDIA_TURBO (1<<11)
#define GEN6_RP_USE_NORMAL_FREQ (1<<9)
#define GEN6_RP_MEDIA_IS_GFX (1<<8)
#define GEN6_RP_ENABLE (1<<7)
#define GEN6_RP_UP_BUSY_MAX (0x2<<3)
#define GEN6_RP_DOWN_BUSY_MIN (0x2<<0)
#define GEN6_RP_UP_THRESHOLD 0xA02C
#define GEN6_RP_DOWN_THRESHOLD 0xA030
#define GEN6_RP_UP_EI 0xA068
#define GEN6_RP_DOWN_EI 0xA06C
#define GEN6_RP_IDLE_HYSTERSIS 0xA070
#define GEN6_RC_STATE 0xA094
#define GEN6_RC1_WAKE_RATE_LIMIT 0xA098
#define GEN6_RC6_WAKE_RATE_LIMIT 0xA09C
#define GEN6_RC6pp_WAKE_RATE_LIMIT 0xA0A0
#define GEN6_RC_EVALUATION_INTERVAL 0xA0A8
#define GEN6_RC_IDLE_HYSTERSIS 0xA0AC
#define GEN6_RC_SLEEP 0xA0B0
#define GEN6_RC1e_THRESHOLD 0xA0B4
#define GEN6_RC6_THRESHOLD 0xA0B8
#define GEN6_RC6p_THRESHOLD 0xA0BC
#define GEN6_RC6pp_THRESHOLD 0xA0C0
#define GEN6_PMISR 0x44020
#define GEN6_PMIMR 0x44024
#define GEN6_PMIIR 0x44028
#define GEN6_PMIER 0x4402C
#define GEN6_PM_MBOX_EVENT (1<<25)
#define GEN6_PM_THERMAL_EVENT (1<<24)
#define GEN6_PM_RP_DOWN_TIMEOUT (1<<6)
#define GEN6_PM_RP_UP_THRESHOLD (1<<5)
#define GEN6_PM_RP_DOWN_THRESHOLD (1<<4)
#define GEN6_PM_RP_UP_EI_EXPIRED (1<<2)
#define GEN6_PM_RP_DOWN_EI_EXPIRED (1<<1)
#define GEN6_PCODE_MAILBOX 0x138124
#define GEN6_PCODE_READY (1<<31)
#define GEN6_PCODE_WRITE_MIN_FREQ_TABLE 0x9
#define GEN6_PCODE_DATA 0x138128
#endif /* _I915_REG_H_ */
......@@ -5842,6 +5842,91 @@ void intel_init_emon(struct drm_device *dev)
dev_priv->corr = (lcfuse & LCFUSE_HIV_MASK);
}
static void gen6_enable_rc6(struct drm_i915_private *dev_priv)
{
int i;
/* Here begins a magic sequence of register writes to enable
* auto-downclocking.
*
* Perhaps there might be some value in exposing these to
* userspace...
*/
I915_WRITE(GEN6_RC_STATE, 0);
__gen6_force_wake_get(dev_priv);
/* disable the counters and set determistic thresholds */
I915_WRITE(GEN6_RC_CONTROL, 0);
I915_WRITE(GEN6_RC1_WAKE_RATE_LIMIT, 1000 << 16);
I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16 | 30);
I915_WRITE(GEN6_RC6pp_WAKE_RATE_LIMIT, 30);
I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000);
I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25);
for (i = 0; i < I915_NUM_RINGS; i++)
I915_WRITE(RING_MAX_IDLE(dev_priv->ring[i].mmio_base), 10);
I915_WRITE(GEN6_RC_SLEEP, 0);
I915_WRITE(GEN6_RC1e_THRESHOLD, 1000);
I915_WRITE(GEN6_RC6_THRESHOLD, 50000);
I915_WRITE(GEN6_RC6p_THRESHOLD, 100000);
I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */
I915_WRITE(GEN6_RC_CONTROL,
GEN6_RC_CTL_RC6p_ENABLE |
GEN6_RC_CTL_RC6_ENABLE |
GEN6_RC_CTL_HW_ENABLE);
I915_WRITE(GEN6_RC_NORMAL_FREQ,
GEN6_FREQUENCY(10) |
GEN6_OFFSET(0) |
GEN6_AGGRESSIVE_TURBO);
I915_WRITE(GEN6_RC_VIDEO_FREQ,
GEN6_FREQUENCY(12));
I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 1000000);
I915_WRITE(GEN6_RP_INTERRUPT_LIMITS,
18 << 24 |
6 << 16);
I915_WRITE(GEN6_RP_UP_THRESHOLD, 90000);
I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 100000);
I915_WRITE(GEN6_RP_UP_EI, 100000);
I915_WRITE(GEN6_RP_DOWN_EI, 300000);
I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
I915_WRITE(GEN6_RP_CONTROL,
GEN6_RP_MEDIA_TURBO |
GEN6_RP_USE_NORMAL_FREQ |
GEN6_RP_MEDIA_IS_GFX |
GEN6_RP_ENABLE |
GEN6_RP_UP_BUSY_MAX |
GEN6_RP_DOWN_BUSY_MIN);
if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
500))
DRM_ERROR("timeout waiting for pcode mailbox to become idle\n");
I915_WRITE(GEN6_PCODE_DATA, 0);
I915_WRITE(GEN6_PCODE_MAILBOX,
GEN6_PCODE_READY |
GEN6_PCODE_WRITE_MIN_FREQ_TABLE);
if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
500))
DRM_ERROR("timeout waiting for pcode mailbox to finish\n");
/* requires MSI enabled */
I915_WRITE(GEN6_PMIER,
GEN6_PM_MBOX_EVENT |
GEN6_PM_THERMAL_EVENT |
GEN6_PM_RP_DOWN_TIMEOUT |
GEN6_PM_RP_UP_THRESHOLD |
GEN6_PM_RP_DOWN_THRESHOLD |
GEN6_PM_RP_UP_EI_EXPIRED |
GEN6_PM_RP_DOWN_EI_EXPIRED);
__gen6_force_wake_put(dev_priv);
}
void intel_enable_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
......@@ -5924,6 +6009,7 @@ void intel_enable_clock_gating(struct drm_device *dev)
_3D_CHICKEN2_WM_READ_PIPELINED << 16 |
_3D_CHICKEN2_WM_READ_PIPELINED);
}
} else if (IS_G4X(dev)) {
uint32_t dspclk_gate;
I915_WRITE(RENCLK_GATE_D1, 0);
......@@ -5997,6 +6083,9 @@ void intel_enable_clock_gating(struct drm_device *dev)
I915_READ(MCHBAR_RENDER_STANDBY) & ~RCX_SW_EXIT);
}
}
if (IS_GEN6(dev))
gen6_enable_rc6(dev_priv);
}
void intel_disable_clock_gating(struct drm_device *dev)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment