arm64: dts: qcom: sdm845-mtp: Make USB1 peripheral

The MTP is a "mobile reference device", as such the default operation is
to use fastboot to boot/flash software onto it and the common case is
thereby that we boot with a USB cable connected downstream from a PC or
a hub.  And without support for the PMI8998 charger block VBUS will not
be driven by the device.

Switch to peripheral until we can enable OTG.
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>

arch/arm64/boot/dts/qcom/sdm845-mtp.dts

@@ -404,8 +404,8 @@ &usb_1 {
 };
 
 &usb_1_dwc3 {
-	/* Until we have Type C hooked up we'll force this as host. */
-	dr_mode = "host";
+	/* Until we have Type C hooked up we'll force this as peripheral. */
+	dr_mode = "peripheral";
 };
 
 &usb_1_hsphy {