Skip to content

L
linux
Commit 90a89de4 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge bk://linuxusb.bkbits.net/linus-2.5 

into home.transmeta.com:/home/torvalds/v2.5/linux
parents f289aa67 1966de6f
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 532 additions and 621 deletions
drivers/usb/core/hub.c
View file @ 90a89de4
......@@ -1175,7 +1175,7 @@ void usb_hub_cleanup(void)
int usb_reset_device(struct usb_device *dev)
{
struct usb_device *parent = dev->parent;
struct usb_device_descriptor descriptor;
struct usb_device_descriptor *descriptor;
int i, ret, port = -1;
if (!parent) {
......@@ -1224,17 +1224,24 @@ int usb_reset_device(struct usb_device *dev)
* If nothing changed, we reprogram the configuration and then
* the alternate settings.
*/
ret = usb_get_descriptor(dev, USB_DT_DEVICE, 0, &descriptor,
sizeof(descriptor));
if (ret < 0)
descriptor = kmalloc(sizeof *descriptor, GFP_NOIO);
if (!descriptor) {
return -ENOMEM;
}
ret = usb_get_descriptor(dev, USB_DT_DEVICE, 0, descriptor,
sizeof(*descriptor));
if (ret < 0) {
kfree(descriptor);
return ret;
}
le16_to_cpus(&descriptor.bcdUSB);
le16_to_cpus(&descriptor.idVendor);
le16_to_cpus(&descriptor.idProduct);
le16_to_cpus(&descriptor.bcdDevice);
le16_to_cpus(&descriptor->bcdUSB);
le16_to_cpus(&descriptor->idVendor);
le16_to_cpus(&descriptor->idProduct);
le16_to_cpus(&descriptor->bcdDevice);
if (memcmp(&dev->descriptor, &descriptor, sizeof(descriptor))) {
if (memcmp(&dev->descriptor, descriptor, sizeof(*descriptor))) {
kfree(descriptor);
usb_destroy_configuration(dev);
ret = usb_get_device_descriptor(dev);
......@@ -1268,6 +1275,8 @@ int usb_reset_device(struct usb_device *dev)
return 1;
}
kfree(descriptor);
ret = usb_set_configuration(dev, dev->actconfig->desc.bConfigurationValue);
if (ret < 0) {
err("failed to set dev %s active configuration (error=%d)",
......
drivers/usb/core/message.c
View file @ 90a89de4
......@@ -88,7 +88,7 @@ int usb_internal_control_msg(struct usb_device *usb_dev, unsigned int pipe,
int retv;
int length;
urb = usb_alloc_urb(0, GFP_KERNEL);
urb = usb_alloc_urb(0, GFP_NOIO);
if (!urb)
return -ENOMEM;
......@@ -131,7 +131,7 @@ int usb_internal_control_msg(struct usb_device *usb_dev, unsigned int pipe,
int usb_control_msg(struct usb_device *dev, unsigned int pipe, __u8 request, __u8 requesttype,
__u16 value, __u16 index, void *data, __u16 size, int timeout)
{
struct usb_ctrlrequest *dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
struct usb_ctrlrequest *dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO);
int ret;
if (!dr)
......
drivers/usb/host/ehci-dbg.c
View file @ 90a89de4
......@@ -117,10 +117,10 @@ static inline void dbg_hcc_params (struct ehci_hcd *ehci, char *label) {}
static void __attribute__((__unused__))
dbg_qh (char *label, struct ehci_hcd *ehci, struct ehci_qh *qh)
{
dbg ("%s %p info1 %x info2 %x hw_curr %x qtd_next %x", label,
qh, qh->hw_info1, qh->hw_info2,
dbg ("%s %p n%08x info1 %x info2 %x hw_curr %x qtd_next %x", label,
qh, qh->hw_next, qh->hw_info1, qh->hw_info2,
qh->hw_current, qh->hw_qtd_next);
dbg (" alt+errs= %x, token= %x, page0= %x, page1= %x",
dbg (" alt+nak+t= %x, token= %x, page0= %x, page1= %x",
qh->hw_alt_next, qh->hw_token,
qh->hw_buf [0], qh->hw_buf [1]);
if (qh->hw_buf [2]) {
......
drivers/usb/host/ehci-hcd.c
View file @ 90a89de4
......@@ -576,7 +576,7 @@ static int ehci_suspend (struct usb_hcd *hcd, u32 state)
int ports;
int i;
dbg ("%s: suspend to %d", hcd_to_bus (hcd)->bus_name, state);
ehci_dbg (ehci, "suspend to %d\n", state);
ports = HCS_N_PORTS (ehci->hcs_params);
......@@ -593,7 +593,7 @@ static int ehci_suspend (struct usb_hcd *hcd, u32 state)
if ((temp & PORT_PE) == 0
|| (temp & PORT_OWNER) != 0)
continue;
dbg ("%s: suspend port %d", hcd_to_bus (hcd)->bus_name, i);
ehci_dbg (ehci, "suspend port %d", i);
temp |= PORT_SUSPEND;
writel (temp, &ehci->regs->port_status [i]);
}
......@@ -615,7 +615,7 @@ static int ehci_resume (struct usb_hcd *hcd)
int ports;
int i;
dbg ("%s: resume", hcd_to_bus (hcd)->bus_name);
ehci_dbg (ehci, "resume\n");
ports = HCS_N_PORTS (ehci->hcs_params);
......@@ -635,7 +635,7 @@ static int ehci_resume (struct usb_hcd *hcd)
if ((temp & PORT_PE) == 0
|| (temp & PORT_SUSPEND) != 0)
continue;
dbg ("%s: resume port %d", hcd_to_bus (hcd)->bus_name, i);
ehci_dbg (ehci, "resume port %d", i);
temp |= PORT_RESUME;
writel (temp, &ehci->regs->port_status [i]);
readl (&ehci->regs->command); /* unblock posted writes */
......@@ -880,8 +880,8 @@ static void ehci_free_config (struct usb_hcd *hcd, struct usb_device *udev)
/* ASSERT: no requests/urbs are still linked (so no TDs) */
/* ASSERT: nobody can be submitting urbs for this any more */
dbg ("%s: free_config devnum %d",
hcd_to_bus (hcd)->bus_name, udev->devnum);
ehci_dbg (ehci, "free_config %s devnum %d\n",
udev->devpath, udev->devnum);
spin_lock_irqsave (&ehci->lock, flags);
for (i = 0; i < 32; i++) {
......@@ -912,7 +912,8 @@ static void ehci_free_config (struct usb_hcd *hcd, struct usb_device *udev)
dev->ep [i] = 0;
if (qh->qh_state == QH_STATE_IDLE)
goto idle;
dbg ("free_config, async ep 0x%02x qh %p", i, qh);
ehci_dbg (ehci, "free_config, async ep 0x%02x qh %p",
i, qh);
/* scan_async() empties the ring as it does its work,
* using IAA, but doesn't (yet?) turn it off. if it
......
drivers/usb/image/scanner.c
View file @ 90a89de4
......@@ -347,8 +347,9 @@
* - Don't print errors when the device is busy.
*
* 0.4.11 2003-02-25
* - Added vendor/product ids for Artec, Avision, Brother, Medion, Primax,
* Prolink, Fujitsu, Plustek, and SYSCAN scanners.
* - Added vendor/product ids for Artec, Avision, Brother, Canon, Compaq,
* Fujitsu, Hewlett-Packard, Lexmark, LG Electronics, Medion, Microtek,
* Primax, Prolink, Plustek, SYSCAN, Trust and UMAX scanners.
* - Fixed generation of devfs names if dynamic minors are disabled.
* - Used kobject reference counting to free the scn struct when the device
* is closed and disconnected. Avoids crashes when writing to a
......
drivers/usb/image/scanner.h
View file @ 90a89de4
......@@ -105,6 +105,7 @@ static struct usb_device_id scanner_device_ids [] = {
{ USB_DEVICE(0x0638, 0x0a10) }, /* iVina FB1600 (=Umax Astra 4500) */
/* Benq: see Acer */
/* Brother */
{ USB_DEVICE(0x04f9, 0x010f) }, /* MFC 5100C */
{ USB_DEVICE(0x04f9, 0x0111) }, /* MFC 6800 */
/* Canon */
{ USB_DEVICE(0x04a9, 0x2201) }, /* CanoScan FB320U */
......@@ -118,9 +119,11 @@ static struct usb_device_id scanner_device_ids [] = {
{ USB_DEVICE(0x04a9, 0x220c) }, /* CanoScan D1250U2 */
{ USB_DEVICE(0x04a9, 0x220d) }, /* CanoScan N670U/N676U/LIDE 20 */
{ USB_DEVICE(0x04a9, 0x220e) }, /* CanoScan N1240U/LIDE 30 */
{ USB_DEVICE(0x04a9, 0x2213) }, /* LIDE 50 */
{ USB_DEVICE(0x04a9, 0x3042) }, /* FS4000US */
/* Colorado -- See Primax/Colorado below */
/* Compaq */
{ USB_DEVICE(0x049f, 0x001a) }, /* S4 100 */
{ USB_DEVICE(0x049f, 0x0021) }, /* S200 */
/* Epson -- See Seiko/Epson below */
/* Fujitsu */
......@@ -152,6 +155,8 @@ static struct usb_device_id scanner_device_ids [] = {
{ USB_DEVICE(0x03f0, 0x0705) }, /* ScanJet 4400C */
// { USB_DEVICE(0x03f0, 0x0801) }, /* ScanJet 7400C - NOT SUPPORTED - use hpusbscsi driver */
{ USB_DEVICE(0x03f0, 0x0901) }, /* ScanJet 2300C */
{ USB_DEVICE(0x03F0, 0x1005) }, /* ScanJet 5400C */
{ USB_DEVICE(0x03F0, 0x1105) }, /* ScanJet 5470C */
{ USB_DEVICE(0x03f0, 0x1305) }, /* Scanjet 4570c */
{ USB_DEVICE(0x03f0, 0x2005) }, /* ScanJet 3570c */
{ USB_DEVICE(0x03f0, 0x2205) }, /* ScanJet 3500c */
......@@ -159,12 +164,16 @@ static struct usb_device_id scanner_device_ids [] = {
{ USB_DEVICE(0x0638, 0x0268) }, /* 1200U */
/* Lexmark */
{ USB_DEVICE(0x043d, 0x002d) }, /* X70/X73 */
{ USB_DEVICE(0x043d, 0x003d) }, /* X83 */
/* LG Electronics */
{ USB_DEVICE(0x0461, 0x0364) }, /* Scanworks 600U (repackaged Primax?) */
/* Medion */
{ USB_DEVICE(0x0461, 0x0377) }, /* MD 5345 - repackaged Primax? */
/* Memorex */
{ USB_DEVICE(0x0461, 0x0346) }, /* 6136u - repackaged Primax ? */
/* Microtek */
{ USB_DEVICE(0x05da, 0x30ce) }, /* ScanMaker 3800 */
{ USB_DEVICE(0x05da, 0x30cf) }, /* ScanMaker 4800 */
/* The following SCSI-over-USB Microtek devices are supported by the
microtek driver: Enable SCSI and USB Microtek in kernel config */
// { USB_DEVICE(0x05da, 0x0099) }, /* ScanMaker X6 - X6U */
......@@ -259,7 +268,11 @@ static struct usb_device_id scanner_device_ids [] = {
{ USB_DEVICE(0x04b8, 0x0802) }, /* Stylus CX3200 */
/* SYSCAN */
{ USB_DEVICE(0x0a82, 0x4600) }, /* TravelScan 460/464 */
/* Trust */
{ USB_DEVICE(0x05cb, 0x1483) }, /* CombiScan 19200 */
{ USB_DEVICE(0x05d8, 0x4006) }, /* Easy Webscan 19200 (repackaged Artec?) */
/* Umax */
{ USB_DEVICE(0x05d8, 0x4009) }, /* Astraslim (actually Artec?) */
{ USB_DEVICE(0x1606, 0x0010) }, /* Astra 1220U */
{ USB_DEVICE(0x1606, 0x0030) }, /* Astra 2000U */
{ USB_DEVICE(0x1606, 0x0060) }, /* Astra 3400U/3450U */
......
drivers/usb/input/hid-core.c
View file @ 90a89de4
......@@ -1334,6 +1334,9 @@ void hid_init_reports(struct hid_device *hid)
#define USB_VENDOR_ID_TANGTOP 0x0d3d
#define USB_DEVICE_ID_TANGTOP_USBPS2 0x0001
#define USB_VENDOR_ID_ESSENTIAL_REALITY 0x0d7f
#define USB_DEVICE_ID_ESSENTIAL_REALITY_P5 0x0100
struct hid_blacklist {
__u16 idVendor;
__u16 idProduct;
......@@ -1377,6 +1380,7 @@ struct hid_blacklist {
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 400, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 500, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_TANGTOP, USB_DEVICE_ID_TANGTOP_USBPS2, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5, HID_QUIRK_IGNORE },
{ 0, 0 }
};
......
drivers/usb/misc/Makefile
View file @ 90a89de4
......@@ -12,5 +12,3 @@ obj-$(CONFIG_USB_SPEEDTOUCH) += speedtch.o
obj-$(CONFIG_USB_TEST) += usbtest.o
obj-$(CONFIG_USB_TIGL) += tiglusb.o
obj-$(CONFIG_USB_USS720) += uss720.o
speedtch-objs := speedtouch.o atmsar.o
drivers/usb/misc/atmsar.c deleted 100644 → 0
View file @ f289aa67
This diff is collapsed.
drivers/usb/misc/atmsar.h deleted 100644 → 0
View file @ f289aa67
#ifndef _ATMSAR_H_
#define _ATMSAR_H_
/******************************************************************************
* atmsar.h -- General SAR library for ATM devices.
*
* Copyright (C) 2000, Johan Verrept
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc., 59
* Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
******************************************************************************/
#include <linux/kernel.h>
#include <linux/proc_fs.h>
#include <linux/slab.h>
#include <linux/atmdev.h>
#include <linux/skbuff.h>
#include <linux/types.h>
#include <linux/atm.h>
#define ATMSAR_USE_53BYTE_CELL 0x1L
#define ATMSAR_SET_PTI 0x2L
#define ATM_CELL_HEADER (ATM_CELL_SIZE - ATM_CELL_PAYLOAD)
/* types */
#define ATMSAR_TYPE_AAL0 ATM_AAL0
#define ATMSAR_TYPE_AAL1 ATM_AAL1
#define ATMSAR_TYPE_AAL2 ATM_AAL2
#define ATMSAR_TYPE_AAL34 ATM_AAL34
#define ATMSAR_TYPE_AAL5 ATM_AAL5
/* default MTU's */
#define ATMSAR_DEF_MTU_AAL0 48
#define ATMSAR_DEF_MTU_AAL1 47
#define ATMSAR_DEF_MTU_AAL2 0 /* not supported */
#define ATMSAR_DEF_MTU_AAL34 0 /* not supported */
#define ATMSAR_DEF_MTU_AAL5 65535 /* max mtu .. */
struct atmsar_vcc_data {
struct atmsar_vcc_data *next;
/* general atmsar flags, per connection */
int flags;
int type;
/* connection specific non-atmsar data */
struct atm_vcc *vcc;
struct k_atm_aal_stats *stats;
unsigned short mtu; /* max is actually 65k for AAL5... */
/* cell data */
unsigned int vp;
unsigned int vc;
unsigned char gfc;
unsigned char pti;
unsigned int headerFlags;
unsigned long atmHeader;
/* raw cell reassembly */
struct sk_buff *reasBuffer;
};
extern struct atmsar_vcc_data *atmsar_open (struct atmsar_vcc_data **list, struct atm_vcc *vcc,
uint type, ushort vpi, ushort vci, unchar pti,
unchar gfc, uint flags);
extern void atmsar_close (struct atmsar_vcc_data **list, struct atmsar_vcc_data *vcc);
struct sk_buff *atmsar_decode_rawcell (struct atmsar_vcc_data *list, struct sk_buff *skb,
struct atmsar_vcc_data **ctx);
struct sk_buff *atmsar_decode_aal5 (struct atmsar_vcc_data *ctx, struct sk_buff *skb);
#endif /* _ATMSAR_H_ */
drivers/usb/net/cdc-ether.c
View file @ 90a89de4
......@@ -1064,15 +1064,23 @@ static void set_ethernet_addr( ether_dev_t *ether_dev )
// Used by driver's probe routine ////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////
void log_device_info(ether_dev_t *ether_dev)
static void log_device_info(ether_dev_t *ether_dev)
{
int len;
int string_num;
unsigned char manu[256];
unsigned char prod[256];
unsigned char sern[256];
unsigned char *manu = NULL;
unsigned char *prod = NULL;
unsigned char *sern = NULL;
unsigned char *mac_addr;
manu = kmalloc(256, GFP_KERNEL);
prod = kmalloc(256, GFP_KERNEL);
sern = kmalloc(256, GFP_KERNEL);
if (!manu || !prod || !sern) {
dbg("no mem for log_device_info");
goto fini;
}
// Default empty strings in case we don't find a real one
manu[0] = 0x00;
prod[0] = 0x00;
......@@ -1113,6 +1121,10 @@ void log_device_info(ether_dev_t *ether_dev)
ether_dev->net->name, manu, prod, sern, mac_addr[0],
mac_addr[1], mac_addr[2], mac_addr[3], mac_addr[4],
mac_addr[5] );
fini:
kfree(manu);
kfree(prod);
kfree(sern);
}
/* Forward declaration */
......
drivers/usb/net/pegasus.c
View file @ 90a89de4
......@@ -121,7 +121,7 @@ static int get_registers(pegasus_t * pegasus, __u16 indx, __u16 size,
char *buffer;
DECLARE_WAITQUEUE(wait, current);
buffer = kmalloc(size, GFP_DMA);
buffer = kmalloc(size, GFP_KERNEL);
if (!buffer) {
warn("%s: looks like we're out of memory", __FUNCTION__);
return -ENOMEM;
......@@ -170,7 +170,7 @@ static int set_registers(pegasus_t * pegasus, __u16 indx, __u16 size,
char *buffer;
DECLARE_WAITQUEUE(wait, current);
buffer = kmalloc(size, GFP_DMA);
buffer = kmalloc(size, GFP_KERNEL);
if (!buffer) {
warn("%s: looks like we're out of memory", __FUNCTION__);
return -ENOMEM;
......@@ -218,7 +218,7 @@ static int set_register(pegasus_t * pegasus, __u16 indx, __u8 data)
char *tmp;
DECLARE_WAITQUEUE(wait, current);
tmp = kmalloc(1, GFP_DMA);
tmp = kmalloc(1, GFP_KERNEL);
if (!tmp) {
warn("%s: looks like we're out of memory", __FUNCTION__);
return -ENOMEM;
......
drivers/usb/serial/whiteheat.c
View file @ 90a89de4
......@@ -783,7 +783,7 @@ static int whiteheat_ioctl (struct usb_serial_port *port, struct file * file, un
if (info->mcr & UART_MCR_RTS)
modem_signals |= TIOCM_RTS;
if (copy_to_user((unsigned int *)arg, &modem_signals, sizeof(unsigned int)));
if (copy_to_user((unsigned int *)arg, &modem_signals, sizeof(unsigned int)))
return -EFAULT;
break;
......
drivers/usb/usb-skeleton.c
View file @ 90a89de4
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7