drm/i915: Enable HDMI on ValleyView

HDMI register offsets are different in Valleyview. Add support for the
same.

v2: drop superfluous comments in HDMI init (Daniel)
Signed-off-by: Beeresh G <beeresh.g@intel.com>
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com>
Reviewed-by: Jesse Barnes <jesse.barnes@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_reg.h

@@ -3419,6 +3419,21 @@
 #define TVIDEO_DIP_DATA(pipe) _PIPE(pipe, _VIDEO_DIP_DATA_A, _VIDEO_DIP_DATA_B)
 #define TVIDEO_DIP_GCP(pipe) _PIPE(pipe, _VIDEO_DIP_GCP_A, _VIDEO_DIP_GCP_B)
 
+#define VLV_VIDEO_DIP_CTL_A		0x60220
+#define VLV_VIDEO_DIP_DATA_A		0x60208
+#define VLV_VIDEO_DIP_GDCP_PAYLOAD_A	0x60210
+
+#define VLV_VIDEO_DIP_CTL_B		0x61170
+#define VLV_VIDEO_DIP_DATA_B		0x61174
+#define VLV_VIDEO_DIP_GDCP_PAYLOAD_B	0x61178
+
+#define VLV_TVIDEO_DIP_CTL(pipe) \
+	 _PIPE(pipe, VLV_VIDEO_DIP_CTL_A, VLV_VIDEO_DIP_CTL_B)
+#define VLV_TVIDEO_DIP_DATA(pipe) \
+	 _PIPE(pipe, VLV_VIDEO_DIP_DATA_A, VLV_VIDEO_DIP_DATA_B)
+#define VLV_TVIDEO_DIP_GCP(pipe) \
+	_PIPE(pipe, VLV_VIDEO_DIP_GDCP_PAYLOAD_A, VLV_VIDEO_DIP_GDCP_PAYLOAD_B)
+
 #define _TRANS_HTOTAL_B          0xe1000
 #define _TRANS_HBLANK_B          0xe1004
 #define _TRANS_HSYNC_B           0xe1008
@@ -3639,6 +3654,7 @@
 #define  ADPA_CRT_HOTPLUG_FORCE_TRIGGER (1<<16)
 
 /* or SDVOB */
+#define VLV_HDMIB 0x61140
 #define HDMIB   0xe1140
 #define  PORT_ENABLE    (1 << 31)
 #define  TRANSCODER(pipe)       ((pipe) << 30)

drivers/gpu/drm/i915/intel_hdmi.c

@@ -177,6 +177,37 @@ static void ironlake_write_infoframe(struct drm_encoder *encoder,
 
 	I915_WRITE(reg, VIDEO_DIP_ENABLE | val | flags);
 }
+
+static void vlv_write_infoframe(struct drm_encoder *encoder,
+				     struct dip_infoframe *frame)
+{
+	uint32_t *data = (uint32_t *)frame;
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc = encoder->crtc;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int reg = VLV_TVIDEO_DIP_CTL(intel_crtc->pipe);
+	unsigned i, len = DIP_HEADER_SIZE + frame->len;
+	u32 flags, val = I915_READ(reg);
+
+	intel_wait_for_vblank(dev, intel_crtc->pipe);
+
+	flags = intel_infoframe_index(frame);
+
+	val &= ~(VIDEO_DIP_SELECT_MASK | 0xf); /* clear DIP data offset */
+
+	I915_WRITE(reg, VIDEO_DIP_ENABLE | val | flags);
+
+	for (i = 0; i < len; i += 4) {
+		I915_WRITE(VLV_TVIDEO_DIP_DATA(intel_crtc->pipe), *data);
+		data++;
+	}
+
+	flags |= intel_infoframe_flags(frame);
+
+	I915_WRITE(reg, VIDEO_DIP_ENABLE | val | flags);
+}
+
 static void intel_set_infoframe(struct drm_encoder *encoder,
 				struct dip_infoframe *frame)
 {
@@ -552,7 +583,11 @@ void intel_hdmi_init(struct drm_device *dev, int sdvox_reg)
 	if (!HAS_PCH_SPLIT(dev)) {
 		intel_hdmi->write_infoframe = i9xx_write_infoframe;
 		I915_WRITE(VIDEO_DIP_CTL, 0);
-	} else {
+	} else if (IS_VALLEYVIEW(dev)) {
+		intel_hdmi->write_infoframe = vlv_write_infoframe;
+		for_each_pipe(i)
+			I915_WRITE(VLV_TVIDEO_DIP_CTL(i), 0);
+	}  else {
 		intel_hdmi->write_infoframe = ironlake_write_infoframe;
 		for_each_pipe(i)
 			I915_WRITE(TVIDEO_DIP_CTL(i), 0);