qlcnic: reduce rx ring size

If eswitch is enabled, rcv ring size can be reduce, as
physical port is partition-ed.
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/qlcnic/qlcnic.h

@@ -146,11 +146,13 @@
 #define MAX_CMD_DESCRIPTORS		1024
 #define MAX_RCV_DESCRIPTORS_1G		4096
 #define MAX_RCV_DESCRIPTORS_10G 	8192
+#define MAX_RCV_DESCRIPTORS_VF		2048
 #define MAX_JUMBO_RCV_DESCRIPTORS_1G	512
 #define MAX_JUMBO_RCV_DESCRIPTORS_10G	1024
 
 #define DEFAULT_RCV_DESCRIPTORS_1G	2048
 #define DEFAULT_RCV_DESCRIPTORS_10G	4096
+#define DEFAULT_RCV_DESCRIPTORS_VF	1024
 #define MAX_RDS_RINGS                   2
 
 #define get_next_index(index, length)	\
@@ -971,6 +973,8 @@ struct qlcnic_adapter {
 	u16 num_txd;
 	u16 num_rxd;
 	u16 num_jumbo_rxd;
+	u16 max_rxd;
+	u16 max_jumbo_rxd;
 
 	u8 max_rds_rings;
 	u8 max_sds_rings;

drivers/net/qlcnic/qlcnic_ethtool.c

@@ -437,14 +437,8 @@ qlcnic_get_ringparam(struct net_device *dev,
 	ring->rx_jumbo_pending = adapter->num_jumbo_rxd;
 	ring->tx_pending = adapter->num_txd;
 
-	if (adapter->ahw.port_type == QLCNIC_GBE) {
-		ring->rx_max_pending = MAX_RCV_DESCRIPTORS_1G;
-		ring->rx_jumbo_max_pending = MAX_JUMBO_RCV_DESCRIPTORS_1G;
-	} else {
-		ring->rx_max_pending = MAX_RCV_DESCRIPTORS_10G;
-		ring->rx_jumbo_max_pending = MAX_JUMBO_RCV_DESCRIPTORS_10G;
-	}
-
+	ring->rx_max_pending = adapter->max_rxd;
+	ring->rx_jumbo_max_pending = adapter->max_jumbo_rxd;
 	ring->tx_max_pending = MAX_CMD_DESCRIPTORS;
 
 	ring->rx_mini_max_pending = 0;
@@ -472,24 +466,17 @@ qlcnic_set_ringparam(struct net_device *dev,
 		struct ethtool_ringparam *ring)
 {
 	struct qlcnic_adapter *adapter = netdev_priv(dev);
-	u16 max_rcv_desc = MAX_RCV_DESCRIPTORS_10G;
-	u16 max_jumbo_desc = MAX_JUMBO_RCV_DESCRIPTORS_10G;
 	u16 num_rxd, num_jumbo_rxd, num_txd;
 
-
 	if (ring->rx_mini_pending)
 		return -EOPNOTSUPP;
 
-	if (adapter->ahw.port_type == QLCNIC_GBE) {
-		max_rcv_desc = MAX_RCV_DESCRIPTORS_1G;
-		max_jumbo_desc = MAX_JUMBO_RCV_DESCRIPTORS_10G;
-	}
-
 	num_rxd = qlcnic_validate_ringparam(ring->rx_pending,
-			MIN_RCV_DESCRIPTORS, max_rcv_desc, "rx");
+			MIN_RCV_DESCRIPTORS, adapter->max_rxd, "rx");
 
 	num_jumbo_rxd = qlcnic_validate_ringparam(ring->rx_jumbo_pending,
-			MIN_JUMBO_DESCRIPTORS, max_jumbo_desc, "rx jumbo");
+			MIN_JUMBO_DESCRIPTORS, adapter->max_jumbo_rxd,
+						"rx jumbo");
 
 	num_txd = qlcnic_validate_ringparam(ring->tx_pending,
 			MIN_CMD_DESCRIPTORS, MAX_CMD_DESCRIPTORS, "tx");

drivers/net/qlcnic/qlcnic_main.c

@@ -656,13 +656,23 @@ qlcnic_check_options(struct qlcnic_adapter *adapter)
 
 	dev_info(&pdev->dev, "firmware v%d.%d.%d\n",
 			fw_major, fw_minor, fw_build);
-
 	if (adapter->ahw.port_type == QLCNIC_XGBE) {
-		adapter->num_rxd = DEFAULT_RCV_DESCRIPTORS_10G;
+		if (adapter->flags & QLCNIC_ESWITCH_ENABLED) {
+			adapter->num_rxd = DEFAULT_RCV_DESCRIPTORS_VF;
+			adapter->max_rxd = MAX_RCV_DESCRIPTORS_VF;
+		} else {
+			adapter->num_rxd = DEFAULT_RCV_DESCRIPTORS_10G;
+			adapter->max_rxd = MAX_RCV_DESCRIPTORS_10G;
+		}
+
 		adapter->num_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_10G;
+		adapter->max_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_10G;
+
 	} else if (adapter->ahw.port_type == QLCNIC_GBE) {
 		adapter->num_rxd = DEFAULT_RCV_DESCRIPTORS_1G;
 		adapter->num_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_1G;
+		adapter->max_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_1G;
+		adapter->max_rxd = MAX_RCV_DESCRIPTORS_1G;
 	}
 
 	adapter->msix_supported = !!use_msi_x;