Commit 9124b077 authored by Johannes Berg's avatar Johannes Berg Committed by John W. Linville

mac80211: make retry limits part of hw config

Instead of having a separate callback, use the HW config callback
with a new flag to change retry limits.
Signed-off-by: default avatarJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 52518189
......@@ -1659,7 +1659,6 @@ static struct ieee80211_ops ath9k_ops = {
.get_tkip_seq = NULL,
.set_rts_threshold = NULL,
.set_frag_threshold = NULL,
.set_retry_limit = NULL,
.get_tsf = ath9k_get_tsf,
.reset_tsf = ath9k_reset_tsf,
.tx_last_beacon = NULL,
......
......@@ -3320,6 +3320,22 @@ static int b43_switch_band(struct b43_wl *wl, struct ieee80211_channel *chan)
return err;
}
/* Write the short and long frame retry limit values. */
static void b43_set_retry_limits(struct b43_wldev *dev,
unsigned int short_retry,
unsigned int long_retry)
{
/* The retry limit is a 4-bit counter. Enforce this to avoid overflowing
* the chip-internal counter. */
short_retry = min(short_retry, (unsigned int)0xF);
long_retry = min(long_retry, (unsigned int)0xF);
b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_SRLIMIT,
short_retry);
b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_LRLIMIT,
long_retry);
}
static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
{
struct b43_wl *wl = hw_to_b43_wl(hw);
......@@ -3340,6 +3356,13 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
dev = wl->current_dev;
phy = &dev->phy;
if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
b43_set_retry_limits(dev, conf->short_frame_max_tx_count,
conf->long_frame_max_tx_count);
changed &= ~IEEE80211_CONF_CHANGE_RETRY_LIMITS;
if (!changed)
goto out_unlock_mutex;
/* Disable IRQs while reconfiguring the device.
* This makes it possible to drop the spinlock throughout
* the reconfiguration process. */
......@@ -3859,22 +3882,6 @@ static void b43_imcfglo_timeouts_workaround(struct b43_wldev *dev)
#endif /* CONFIG_SSB_DRIVER_PCICORE */
}
/* Write the short and long frame retry limit values. */
static void b43_set_retry_limits(struct b43_wldev *dev,
unsigned int short_retry,
unsigned int long_retry)
{
/* The retry limit is a 4-bit counter. Enforce this to avoid overflowing
* the chip-internal counter. */
short_retry = min(short_retry, (unsigned int)0xF);
long_retry = min(long_retry, (unsigned int)0xF);
b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_SRLIMIT,
short_retry);
b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_LRLIMIT,
long_retry);
}
static void b43_set_synth_pu_delay(struct b43_wldev *dev, bool idle)
{
u16 pu_delay;
......@@ -4195,26 +4202,6 @@ static void b43_op_stop(struct ieee80211_hw *hw)
cancel_work_sync(&(wl->txpower_adjust_work));
}
static int b43_op_set_retry_limit(struct ieee80211_hw *hw,
u32 short_retry_limit, u32 long_retry_limit)
{
struct b43_wl *wl = hw_to_b43_wl(hw);
struct b43_wldev *dev;
int err = 0;
mutex_lock(&wl->mutex);
dev = wl->current_dev;
if (unlikely(!dev || (b43_status(dev) < B43_STAT_INITIALIZED))) {
err = -ENODEV;
goto out_unlock;
}
b43_set_retry_limits(dev, short_retry_limit, long_retry_limit);
out_unlock:
mutex_unlock(&wl->mutex);
return err;
}
static int b43_op_beacon_set_tim(struct ieee80211_hw *hw,
struct ieee80211_sta *sta, bool set)
{
......@@ -4251,7 +4238,6 @@ static const struct ieee80211_ops b43_hw_ops = {
.get_tx_stats = b43_op_get_tx_stats,
.start = b43_op_start,
.stop = b43_op_stop,
.set_retry_limit = b43_op_set_retry_limit,
.set_tim = b43_op_beacon_set_tim,
.sta_notify = b43_op_sta_notify,
};
......
......@@ -2556,6 +2556,20 @@ static int b43legacy_switch_phymode(struct b43legacy_wl *wl,
return err;
}
/* Write the short and long frame retry limit values. */
static void b43legacy_set_retry_limits(struct b43legacy_wldev *dev,
unsigned int short_retry,
unsigned int long_retry)
{
/* The retry limit is a 4-bit counter. Enforce this to avoid overflowing
* the chip-internal counter. */
short_retry = min(short_retry, (unsigned int)0xF);
long_retry = min(long_retry, (unsigned int)0xF);
b43legacy_shm_write16(dev, B43legacy_SHM_WIRELESS, 0x0006, short_retry);
b43legacy_shm_write16(dev, B43legacy_SHM_WIRELESS, 0x0007, long_retry);
}
static int b43legacy_op_dev_config(struct ieee80211_hw *hw,
u32 changed)
{
......@@ -2577,6 +2591,14 @@ static int b43legacy_op_dev_config(struct ieee80211_hw *hw,
dev = wl->current_dev;
phy = &dev->phy;
if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
b43legacy_set_retry_limits(dev,
conf->short_frame_max_tx_count,
conf->long_frame_max_tx_count);
changed &= ~IEEE80211_CONF_CHANGE_RETRY_LIMITS;
if (!changed)
goto out_unlock_mutex;
/* Switch the PHY mode (if necessary). */
switch (conf->channel->band) {
case IEEE80211_BAND_2GHZ:
......@@ -2989,20 +3011,6 @@ static void b43legacy_imcfglo_timeouts_workaround(struct b43legacy_wldev *dev)
#endif /* CONFIG_SSB_DRIVER_PCICORE */
}
/* Write the short and long frame retry limit values. */
static void b43legacy_set_retry_limits(struct b43legacy_wldev *dev,
unsigned int short_retry,
unsigned int long_retry)
{
/* The retry limit is a 4-bit counter. Enforce this to avoid overflowing
* the chip-internal counter. */
short_retry = min(short_retry, (unsigned int)0xF);
long_retry = min(long_retry, (unsigned int)0xF);
b43legacy_shm_write16(dev, B43legacy_SHM_WIRELESS, 0x0006, short_retry);
b43legacy_shm_write16(dev, B43legacy_SHM_WIRELESS, 0x0007, long_retry);
}
static void b43legacy_set_synth_pu_delay(struct b43legacy_wldev *dev,
bool idle) {
u16 pu_delay = 1050;
......@@ -3367,28 +3375,6 @@ static void b43legacy_op_stop(struct ieee80211_hw *hw)
mutex_unlock(&wl->mutex);
}
static int b43legacy_op_set_retry_limit(struct ieee80211_hw *hw,
u32 short_retry_limit,
u32 long_retry_limit)
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
struct b43legacy_wldev *dev;
int err = 0;
mutex_lock(&wl->mutex);
dev = wl->current_dev;
if (unlikely(!dev ||
(b43legacy_status(dev) < B43legacy_STAT_INITIALIZED))) {
err = -ENODEV;
goto out_unlock;
}
b43legacy_set_retry_limits(dev, short_retry_limit, long_retry_limit);
out_unlock:
mutex_unlock(&wl->mutex);
return err;
}
static int b43legacy_op_beacon_set_tim(struct ieee80211_hw *hw,
struct ieee80211_sta *sta, bool set)
{
......@@ -3414,7 +3400,6 @@ static const struct ieee80211_ops b43legacy_hw_ops = {
.get_tx_stats = b43legacy_op_get_tx_stats,
.start = b43legacy_op_start,
.stop = b43legacy_op_stop,
.set_retry_limit = b43legacy_op_set_retry_limit,
.set_tim = b43legacy_op_beacon_set_tim,
};
......
......@@ -1574,7 +1574,6 @@ static const struct ieee80211_ops rt2400pci_mac80211_ops = {
.config_interface = rt2x00mac_config_interface,
.configure_filter = rt2x00mac_configure_filter,
.get_stats = rt2x00mac_get_stats,
.set_retry_limit = rt2400pci_set_retry_limit,
.bss_info_changed = rt2x00mac_bss_info_changed,
.conf_tx = rt2400pci_conf_tx,
.get_tx_stats = rt2x00mac_get_tx_stats,
......@@ -1603,6 +1602,7 @@ static const struct rt2x00lib_ops rt2400pci_rt2x00_ops = {
.config_intf = rt2400pci_config_intf,
.config_erp = rt2400pci_config_erp,
.config = rt2400pci_config,
.set_retry_limit = rt2400pci_set_retry_limit,
};
static const struct data_queue_desc rt2400pci_queue_rx = {
......
......@@ -1874,7 +1874,6 @@ static const struct ieee80211_ops rt2500pci_mac80211_ops = {
.config_interface = rt2x00mac_config_interface,
.configure_filter = rt2x00mac_configure_filter,
.get_stats = rt2x00mac_get_stats,
.set_retry_limit = rt2500pci_set_retry_limit,
.bss_info_changed = rt2x00mac_bss_info_changed,
.conf_tx = rt2x00mac_conf_tx,
.get_tx_stats = rt2x00mac_get_tx_stats,
......@@ -1903,6 +1902,7 @@ static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = {
.config_intf = rt2500pci_config_intf,
.config_erp = rt2500pci_config_erp,
.config = rt2500pci_config,
.set_retry_limit = rt2500pci_set_retry_limit,
};
static const struct data_queue_desc rt2500pci_queue_rx = {
......
......@@ -599,6 +599,9 @@ struct rt2x00lib_ops {
#define CONFIG_UPDATE_SLOT_TIME ( 1 << 5 )
#define CONFIG_UPDATE_BEACON_INT ( 1 << 6 )
#define CONFIG_UPDATE_ALL 0xffff
int (*set_retry_limit) (struct ieee80211_hw *hw,
u32 short_limit, u32 long_limit);
};
/*
......
......@@ -349,6 +349,15 @@ int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed)
if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
return 0;
if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) {
rt2x00dev->ops->lib->set_retry_limit(hw,
conf->short_frame_max_tx_count,
conf->long_frame_max_tx_count);
}
changed &= ~IEEE80211_CONF_CHANGE_RETRY_LIMITS;
if (!changed)
return 0;
/*
* Only change device state when the radio is enabled. It does not
* matter what parameters we have configured when the radio is disabled
......
......@@ -2724,7 +2724,6 @@ static const struct ieee80211_ops rt61pci_mac80211_ops = {
.configure_filter = rt2x00mac_configure_filter,
.set_key = rt2x00mac_set_key,
.get_stats = rt2x00mac_get_stats,
.set_retry_limit = rt61pci_set_retry_limit,
.bss_info_changed = rt2x00mac_bss_info_changed,
.conf_tx = rt61pci_conf_tx,
.get_tx_stats = rt2x00mac_get_tx_stats,
......@@ -2757,6 +2756,7 @@ static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
.config_intf = rt61pci_config_intf,
.config_erp = rt61pci_config_erp,
.config = rt61pci_config,
.set_retry_limit = rt61pci_set_retry_limit,
};
static const struct data_queue_desc rt61pci_queue_rx = {
......
......@@ -2315,7 +2315,6 @@ static const struct ieee80211_ops rt73usb_mac80211_ops = {
.configure_filter = rt2x00mac_configure_filter,
.set_key = rt2x00mac_set_key,
.get_stats = rt2x00mac_get_stats,
.set_retry_limit = rt73usb_set_retry_limit,
.bss_info_changed = rt2x00mac_bss_info_changed,
.conf_tx = rt73usb_conf_tx,
.get_tx_stats = rt2x00mac_get_tx_stats,
......@@ -2347,6 +2346,7 @@ static const struct rt2x00lib_ops rt73usb_rt2x00_ops = {
.config_intf = rt73usb_config_intf,
.config_erp = rt73usb_config_erp,
.config = rt73usb_config,
.set_retry_limit = rt73usb_set_retry_limit,
};
static const struct data_queue_desc rt73usb_queue_rx = {
......
......@@ -473,6 +473,7 @@ static inline int __deprecated __IEEE80211_CONF_SHORT_SLOT_TIME(void)
* @IEEE80211_CONF_CHANGE_PS: the PS flag changed
* @IEEE80211_CONF_CHANGE_POWER: the TX power changed
* @IEEE80211_CONF_CHANGE_CHANNEL: the channel changed
* @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed
*/
enum ieee80211_conf_changed {
IEEE80211_CONF_CHANGE_RADIO_ENABLED = BIT(0),
......@@ -482,6 +483,7 @@ enum ieee80211_conf_changed {
IEEE80211_CONF_CHANGE_PS = BIT(4),
IEEE80211_CONF_CHANGE_POWER = BIT(5),
IEEE80211_CONF_CHANGE_CHANNEL = BIT(6),
IEEE80211_CONF_CHANGE_RETRY_LIMITS = BIT(7),
};
/**
......@@ -497,6 +499,12 @@ enum ieee80211_conf_changed {
* @ht_cap: describes current self configuration of 802.11n HT capabilities
* @ht_bss_conf: describes current BSS configuration of 802.11n HT parameters
* @channel: the channel to tune to
* @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame
* (a frame not RTS protected), called "dot11LongRetryLimit" in 802.11,
* but actually means the number of transmissions not the number of retries
* @short_frame_max_tx_count: Maximum number of transmissions for a "short"
* frame, called "dot11ShortRetryLimit" in 802.11, but actually means the
* number of transmissions not the number of retries
*/
struct ieee80211_conf {
int beacon_int;
......@@ -506,6 +514,8 @@ struct ieee80211_conf {
u16 listen_interval;
bool radio_enabled;
u8 long_frame_max_tx_count, short_frame_max_tx_count;
struct ieee80211_channel *channel;
struct ieee80211_sta_ht_cap ht_cap;
......@@ -1190,8 +1200,6 @@ enum ieee80211_ampdu_mlme_action {
* the device does fragmentation by itself; if this method is assigned then
* the stack will not do fragmentation.
*
* @set_retry_limit: Configuration of retry limits (if device needs it)
*
* @sta_notify: Notifies low level driver about addition or removal
* of assocaited station or AP.
*
......@@ -1261,8 +1269,6 @@ struct ieee80211_ops {
u32 *iv32, u16 *iv16);
int (*set_rts_threshold)(struct ieee80211_hw *hw, u32 value);
int (*set_frag_threshold)(struct ieee80211_hw *hw, u32 value);
int (*set_retry_limit)(struct ieee80211_hw *hw,
u32 short_retry, u32 long_retr);
void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
enum sta_notify_cmd, struct ieee80211_sta *sta);
int (*conf_tx)(struct ieee80211_hw *hw, u16 queue,
......
......@@ -52,9 +52,9 @@ DEBUGFS_READONLY_FILE(rts_threshold, 20, "%d",
DEBUGFS_READONLY_FILE(fragmentation_threshold, 20, "%d",
local->fragmentation_threshold);
DEBUGFS_READONLY_FILE(short_retry_limit, 20, "%d",
local->short_retry_limit);
local->hw.conf.short_frame_max_tx_count);
DEBUGFS_READONLY_FILE(long_retry_limit, 20, "%d",
local->long_retry_limit);
local->hw.conf.long_frame_max_tx_count);
DEBUGFS_READONLY_FILE(total_ps_buffered, 20, "%d",
local->total_ps_buffered);
DEBUGFS_READONLY_FILE(wep_iv, 20, "%#06x",
......
......@@ -635,8 +635,6 @@ struct ieee80211_local {
int rts_threshold;
int fragmentation_threshold;
int short_retry_limit; /* dot11ShortRetryLimit */
int long_retry_limit; /* dot11LongRetryLimit */
struct crypto_blkcipher *wep_tx_tfm;
struct crypto_blkcipher *wep_rx_tfm;
......
......@@ -673,8 +673,8 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
local->short_retry_limit = 7;
local->long_retry_limit = 4;
local->hw.conf.long_frame_max_tx_count = 4;
local->hw.conf.short_frame_max_tx_count = 7;
local->hw.conf.radio_enabled = true;
INIT_LIST_HEAD(&local->interfaces);
......
......@@ -505,10 +505,10 @@ ieee80211_tx_h_misc(struct ieee80211_tx_data *tx)
info->flags |=
IEEE80211_TX_CTL_LONG_RETRY_LIMIT;
info->control.retry_limit =
tx->local->long_retry_limit;
tx->local->hw.conf.long_frame_max_tx_count - 1;
} else {
info->control.retry_limit =
tx->local->short_retry_limit;
tx->local->hw.conf.short_frame_max_tx_count - 1;
}
} else {
info->control.retry_limit = 1;
......
......@@ -802,21 +802,16 @@ static int ieee80211_ioctl_siwretry(struct net_device *dev,
(retry->flags & IW_RETRY_TYPE) != IW_RETRY_LIMIT)
return -EINVAL;
if (retry->flags & IW_RETRY_MAX)
local->long_retry_limit = retry->value;
else if (retry->flags & IW_RETRY_MIN)
local->short_retry_limit = retry->value;
else {
local->long_retry_limit = retry->value;
local->short_retry_limit = retry->value;
if (retry->flags & IW_RETRY_MAX) {
local->hw.conf.long_frame_max_tx_count = retry->value;
} else if (retry->flags & IW_RETRY_MIN) {
local->hw.conf.short_frame_max_tx_count = retry->value;
} else {
local->hw.conf.long_frame_max_tx_count = retry->value;
local->hw.conf.short_frame_max_tx_count = retry->value;
}
if (local->ops->set_retry_limit) {
return local->ops->set_retry_limit(
local_to_hw(local),
local->short_retry_limit,
local->long_retry_limit);
}
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_RETRY_LIMITS);
return 0;
}
......@@ -833,14 +828,15 @@ static int ieee80211_ioctl_giwretry(struct net_device *dev,
/* first return min value, iwconfig will ask max value
* later if needed */
retry->flags |= IW_RETRY_LIMIT;
retry->value = local->short_retry_limit;
if (local->long_retry_limit != local->short_retry_limit)
retry->value = local->hw.conf.short_frame_max_tx_count;
if (local->hw.conf.long_frame_max_tx_count !=
local->hw.conf.short_frame_max_tx_count)
retry->flags |= IW_RETRY_MIN;
return 0;
}
if (retry->flags & IW_RETRY_MAX) {
retry->flags = IW_RETRY_LIMIT | IW_RETRY_MAX;
retry->value = local->long_retry_limit;
retry->value = local->hw.conf.long_frame_max_tx_count;
}
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment