Commit 9184a227 authored by Junchang Wang's avatar Junchang Wang Committed by David S. Miller

8139too: Add 64bit statistics

Switch to use ndo_get_stats64 to get 64bit statistics.
Two sync entries are used (one for Rx and one for Tx).
Signed-off-by: default avatarJunchang Wang <junchangwang@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent f6a1ad42
......@@ -565,6 +565,12 @@ struct rtl_extra_stats {
unsigned long rx_lost_in_ring;
};
struct rtl8139_stats {
u64 packets;
u64 bytes;
struct u64_stats_sync syncp;
};
struct rtl8139_private {
void __iomem *mmio_addr;
int drv_flags;
......@@ -575,11 +581,13 @@ struct rtl8139_private {
unsigned char *rx_ring;
unsigned int cur_rx; /* RX buf index of next pkt */
struct rtl8139_stats rx_stats;
dma_addr_t rx_ring_dma;
unsigned int tx_flag;
unsigned long cur_tx;
unsigned long dirty_tx;
struct rtl8139_stats tx_stats;
unsigned char *tx_buf[NUM_TX_DESC]; /* Tx bounce buffers */
unsigned char *tx_bufs; /* Tx bounce buffer region. */
dma_addr_t tx_bufs_dma;
......@@ -641,7 +649,9 @@ static int rtl8139_poll(struct napi_struct *napi, int budget);
static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance);
static int rtl8139_close (struct net_device *dev);
static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd);
static struct net_device_stats *rtl8139_get_stats (struct net_device *dev);
static struct rtnl_link_stats64 *rtl8139_get_stats64(struct net_device *dev,
struct rtnl_link_stats64
*stats);
static void rtl8139_set_rx_mode (struct net_device *dev);
static void __set_rx_mode (struct net_device *dev);
static void rtl8139_hw_start (struct net_device *dev);
......@@ -937,7 +947,7 @@ static int rtl8139_set_features(struct net_device *dev, netdev_features_t featur
static const struct net_device_ops rtl8139_netdev_ops = {
.ndo_open = rtl8139_open,
.ndo_stop = rtl8139_close,
.ndo_get_stats = rtl8139_get_stats,
.ndo_get_stats64 = rtl8139_get_stats64,
.ndo_change_mtu = eth_change_mtu,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = rtl8139_set_mac_address,
......@@ -1807,8 +1817,10 @@ static void rtl8139_tx_interrupt (struct net_device *dev,
dev->stats.tx_fifo_errors++;
}
dev->stats.collisions += (txstatus >> 24) & 15;
dev->stats.tx_bytes += txstatus & 0x7ff;
dev->stats.tx_packets++;
u64_stats_update_begin(&tp->tx_stats.syncp);
tp->tx_stats.packets++;
tp->tx_stats.bytes += txstatus & 0x7ff;
u64_stats_update_end(&tp->tx_stats.syncp);
}
dirty_tx++;
......@@ -2050,8 +2062,10 @@ static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
skb->protocol = eth_type_trans (skb, dev);
dev->stats.rx_bytes += pkt_size;
dev->stats.rx_packets++;
u64_stats_update_begin(&tp->rx_stats.syncp);
tp->rx_stats.packets++;
tp->rx_stats.bytes += pkt_size;
u64_stats_update_end(&tp->rx_stats.syncp);
netif_receive_skb (skb);
} else {
......@@ -2515,11 +2529,13 @@ static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
}
static struct net_device_stats *rtl8139_get_stats (struct net_device *dev)
static struct rtnl_link_stats64 *
rtl8139_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats)
{
struct rtl8139_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
unsigned long flags;
unsigned int start;
if (netif_running(dev)) {
spin_lock_irqsave (&tp->lock, flags);
......@@ -2528,7 +2544,21 @@ static struct net_device_stats *rtl8139_get_stats (struct net_device *dev)
spin_unlock_irqrestore (&tp->lock, flags);
}
return &dev->stats;
netdev_stats_to_stats64(stats, &dev->stats);
do {
start = u64_stats_fetch_begin_bh(&tp->rx_stats.syncp);
stats->rx_packets = tp->rx_stats.packets;
stats->rx_bytes = tp->rx_stats.bytes;
} while (u64_stats_fetch_retry_bh(&tp->rx_stats.syncp, start));
do {
start = u64_stats_fetch_begin_bh(&tp->tx_stats.syncp);
stats->tx_packets = tp->tx_stats.packets;
stats->tx_bytes = tp->tx_stats.bytes;
} while (u64_stats_fetch_retry_bh(&tp->tx_stats.syncp, start));
return stats;
}
/* Set or clear the multicast filter for this adaptor.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment