net: hns: bug fix about hisilicon TSO BD mode

The current upstreaming code fails to set the tso_mode register
when initilizes, when processes large size packets, the default 4 bd is
not enough, so this patch initilizes it and set the default value to 8 bds
Signed-off-by: Daode Huang <huangdaode@hisilicon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c

@@ -369,8 +369,17 @@ int hns_rcb_common_init_hw(struct rcb_common_cb *rcb_common)
 	dsaf_write_dev(rcb_common, RCB_COM_CFG_ENDIAN_REG,
 		       HNS_RCB_COMMON_ENDIAN);
 
-	dsaf_write_dev(rcb_common, RCB_COM_CFG_FNA_REG, 0x0);
-	dsaf_write_dev(rcb_common, RCB_COM_CFG_FA_REG, 0x1);
+	if (AE_IS_VER1(rcb_common->dsaf_dev->dsaf_ver)) {
+		dsaf_write_dev(rcb_common, RCB_COM_CFG_FNA_REG, 0x0);
+		dsaf_write_dev(rcb_common, RCB_COM_CFG_FA_REG, 0x1);
+	} else {
+		dsaf_set_dev_bit(rcb_common, RCBV2_COM_CFG_USER_REG,
+				 RCB_COM_CFG_FNA_B, false);
+		dsaf_set_dev_bit(rcb_common, RCBV2_COM_CFG_USER_REG,
+				 RCB_COM_CFG_FA_B, true);
+		dsaf_set_dev_bit(rcb_common, RCBV2_COM_CFG_TSO_MODE_REG,
+				 RCB_COM_TSO_MODE_B, HNS_TSO_MODE_8BD_32K);
+	}
 
 	return 0;
 }

drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.h

@@ -54,6 +54,9 @@ struct rcb_common_cb;
 #define HNS_DUMP_REG_NUM			500
 #define HNS_STATIC_REG_NUM			12
 
+#define HNS_TSO_MODE_8BD_32K			1
+#define HNS_TSO_MDOE_4BD_16K			0
+
 enum rcb_int_flag {
 	RCB_INT_FLAG_TX = 0x1,
 	RCB_INT_FLAG_RX = (0x1 << 1),

drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h

@@ -363,6 +363,8 @@
 #define RCB_COM_CFG_FA_REG			0x3C
 #define RCB_COM_CFG_PKT_TC_BP_REG		0x40
 #define RCB_COM_CFG_PPE_TNL_CLKEN_REG		0x44
+#define RCBV2_COM_CFG_USER_REG			0x30
+#define RCBV2_COM_CFG_TSO_MODE_REG		0x50
 
 #define RCB_COM_INTMSK_TX_PKT_REG		0x3A0
 #define RCB_COM_RINT_TX_PKT_REG			0x3A8
@@ -860,6 +862,9 @@
 
 #define PPE_COMMON_CNT_CLR_CE_B	0
 #define PPE_COMMON_CNT_CLR_SNAP_EN_B	1
+#define RCB_COM_TSO_MODE_B	0
+#define RCB_COM_CFG_FNA_B	1
+#define RCB_COM_CFG_FA_B	0
 
 #define GMAC_DUPLEX_TYPE_B 0