drm/i915: Make combo PHY DDI macro definitions consistent for ICL and CNL

Organize combo PHY DDI macro definitions semantically based on dword,
lane and port (in this order).

Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128220012.13122-2-aditya.swarup@intel.com

drivers/gpu/drm/i915/i915_reg.h

@@ -1888,13 +1888,13 @@ enum i915_power_well_id {
 #define _CNL_PORT_TX_DW4_LN1_AE		0x1624D0
 #define CNL_PORT_TX_DW4_GRP(port)	_MMIO(_CNL_PORT_TX_DW_GRP(4, (port)))
 #define CNL_PORT_TX_DW4_LN0(port)	_MMIO(_CNL_PORT_TX_DW_LN0(4, (port)))
-#define CNL_PORT_TX_DW4_LN(port, ln)   _MMIO(_CNL_PORT_TX_DW_LN0(4, (port)) + \
+#define CNL_PORT_TX_DW4_LN(ln, port)   _MMIO(_CNL_PORT_TX_DW_LN0(4, (port)) + \
 					   ((ln) * (_CNL_PORT_TX_DW4_LN1_AE - \
 						    _CNL_PORT_TX_DW4_LN0_AE)))
 #define ICL_PORT_TX_DW4_AUX(port)	_MMIO(_ICL_PORT_TX_DW_AUX(4, port))
 #define ICL_PORT_TX_DW4_GRP(port)	_MMIO(_ICL_PORT_TX_DW_GRP(4, port))
 #define ICL_PORT_TX_DW4_LN0(port)	_MMIO(_ICL_PORT_TX_DW_LN(4, 0, port))
-#define ICL_PORT_TX_DW4_LN(port, ln)	_MMIO(_ICL_PORT_TX_DW_LN(4, ln, port))
+#define ICL_PORT_TX_DW4_LN(ln, port)	_MMIO(_ICL_PORT_TX_DW_LN(4, ln, port))
 #define   LOADGEN_SELECT		(1 << 31)
 #define   POST_CURSOR_1(x)		((x) << 12)
 #define   POST_CURSOR_1_MASK		(0x3F << 12)
@@ -1921,7 +1921,7 @@ enum i915_power_well_id {
 #define ICL_PORT_TX_DW7_AUX(port)	_MMIO(_ICL_PORT_TX_DW_AUX(7, port))
 #define ICL_PORT_TX_DW7_GRP(port)	_MMIO(_ICL_PORT_TX_DW_GRP(7, port))
 #define ICL_PORT_TX_DW7_LN0(port)	_MMIO(_ICL_PORT_TX_DW_LN(7, 0, port))
-#define ICL_PORT_TX_DW7_LN(port, ln)	_MMIO(_ICL_PORT_TX_DW_LN(7, ln, port))
+#define ICL_PORT_TX_DW7_LN(ln, port)	_MMIO(_ICL_PORT_TX_DW_LN(7, ln, port))
 #define   N_SCALAR(x)			((x) << 24)
 #define   N_SCALAR_MASK			(0x7F << 24)
 

drivers/gpu/drm/i915/icl_dsi.c

@@ -246,13 +246,13 @@ static void dsi_program_swing_and_deemphasis(struct intel_encoder *encoder)
 
 		for (lane = 0; lane <= 3; lane++) {
 			/* Bspec: must not use GRP register for write */
-			tmp = I915_READ(ICL_PORT_TX_DW4_LN(port, lane));
+			tmp = I915_READ(ICL_PORT_TX_DW4_LN(lane, port));
 			tmp &= ~(POST_CURSOR_1_MASK | POST_CURSOR_2_MASK |
 				 CURSOR_COEFF_MASK);
 			tmp |= POST_CURSOR_1(0x0);
 			tmp |= POST_CURSOR_2(0x0);
 			tmp |= CURSOR_COEFF(0x3f);
-			I915_WRITE(ICL_PORT_TX_DW4_LN(port, lane), tmp);
+			I915_WRITE(ICL_PORT_TX_DW4_LN(lane, port), tmp);
 		}
 	}
 }
@@ -390,11 +390,11 @@ static void gen11_dsi_config_phy_lanes_sequence(struct intel_encoder *encoder)
 		tmp &= ~LOADGEN_SELECT;
 		I915_WRITE(ICL_PORT_TX_DW4_AUX(port), tmp);
 		for (lane = 0; lane <= 3; lane++) {
-			tmp = I915_READ(ICL_PORT_TX_DW4_LN(port, lane));
+			tmp = I915_READ(ICL_PORT_TX_DW4_LN(lane, port));
 			tmp &= ~LOADGEN_SELECT;
 			if (lane != 2)
 				tmp |= LOADGEN_SELECT;
-			I915_WRITE(ICL_PORT_TX_DW4_LN(port, lane), tmp);
+			I915_WRITE(ICL_PORT_TX_DW4_LN(lane, port), tmp);
 		}
 	}
 

drivers/gpu/drm/i915/intel_ddi.c

@@ -2317,13 +2317,13 @@ static void cnl_ddi_vswing_program(struct intel_encoder *encoder,
 	/* Program PORT_TX_DW4 */
 	/* We cannot write to GRP. It would overrite individual loadgen */
 	for (ln = 0; ln < 4; ln++) {
-		val = I915_READ(CNL_PORT_TX_DW4_LN(port, ln));
+		val = I915_READ(CNL_PORT_TX_DW4_LN(ln, port));
 		val &= ~(POST_CURSOR_1_MASK | POST_CURSOR_2_MASK |
 			 CURSOR_COEFF_MASK);
 		val |= POST_CURSOR_1(ddi_translations[level].dw4_post_cursor_1);
 		val |= POST_CURSOR_2(ddi_translations[level].dw4_post_cursor_2);
 		val |= CURSOR_COEFF(ddi_translations[level].dw4_cursor_coeff);
-		I915_WRITE(CNL_PORT_TX_DW4_LN(port, ln), val);
+		I915_WRITE(CNL_PORT_TX_DW4_LN(ln, port), val);
 	}
 
 	/* Program PORT_TX_DW5 */
@@ -2379,14 +2379,14 @@ static void cnl_ddi_vswing_sequence(struct intel_encoder *encoder,
 	 * > 6 GHz (LN0=0, LN1=0, LN2=0, LN3=0)
 	 */
 	for (ln = 0; ln <= 3; ln++) {
-		val = I915_READ(CNL_PORT_TX_DW4_LN(port, ln));
+		val = I915_READ(CNL_PORT_TX_DW4_LN(ln, port));
 		val &= ~LOADGEN_SELECT;
 
 		if ((rate <= 600000 && width == 4 && ln >= 1)  ||
 		    (rate <= 600000 && width < 4 && (ln == 1 || ln == 2))) {
 			val |= LOADGEN_SELECT;
 		}
-		I915_WRITE(CNL_PORT_TX_DW4_LN(port, ln), val);
+		I915_WRITE(CNL_PORT_TX_DW4_LN(ln, port), val);
 	}
 
 	/* 3. Set PORT_CL_DW5 SUS Clock Config to 11b */
@@ -2448,13 +2448,13 @@ static void icl_ddi_combo_vswing_program(struct drm_i915_private *dev_priv,
 	/* Program PORT_TX_DW4 */
 	/* We cannot write to GRP. It would overwrite individual loadgen. */
 	for (ln = 0; ln <= 3; ln++) {
-		val = I915_READ(ICL_PORT_TX_DW4_LN(port, ln));
+		val = I915_READ(ICL_PORT_TX_DW4_LN(ln, port));
 		val &= ~(POST_CURSOR_1_MASK | POST_CURSOR_2_MASK |
 			 CURSOR_COEFF_MASK);
 		val |= POST_CURSOR_1(ddi_translations[level].dw4_post_cursor_1);
 		val |= POST_CURSOR_2(ddi_translations[level].dw4_post_cursor_2);
 		val |= CURSOR_COEFF(ddi_translations[level].dw4_cursor_coeff);
-		I915_WRITE(ICL_PORT_TX_DW4_LN(port, ln), val);
+		I915_WRITE(ICL_PORT_TX_DW4_LN(ln, port), val);
 	}
 
 	/* Program PORT_TX_DW7 */
@@ -2505,14 +2505,14 @@ static void icl_combo_phy_ddi_vswing_sequence(struct intel_encoder *encoder,
 	 * > 6 GHz (LN0=0, LN1=0, LN2=0, LN3=0)
 	 */
 	for (ln = 0; ln <= 3; ln++) {
-		val = I915_READ(ICL_PORT_TX_DW4_LN(port, ln));
+		val = I915_READ(ICL_PORT_TX_DW4_LN(ln, port));
 		val &= ~LOADGEN_SELECT;
 
 		if ((rate <= 600000 && width == 4 && ln >= 1) ||
 		    (rate <= 600000 && width < 4 && (ln == 1 || ln == 2))) {
 			val |= LOADGEN_SELECT;
 		}
-		I915_WRITE(ICL_PORT_TX_DW4_LN(port, ln), val);
+		I915_WRITE(ICL_PORT_TX_DW4_LN(ln, port), val);
 	}
 
 	/* 3. Set PORT_CL_DW5 SUS Clock Config to 11b */