[PATCH] sil24: initialization fix

sil24 0.20 didn't use to perform (what seems to be) port multiplier
initialization and controller reset 0.10 driver does.  This makes some
sil24 controllers malfunction.  This patch adds PM initialization and
controller resetting to initilization and bumps version to 0.21.
Please refer to the following thread for more information.

http://marc.theaimsgroup.com/?l=linux-ide&m=112582819830324&w=2
http://marc.theaimsgroup.com/?l=linux-ide&m=112636045531060&w=2Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

drivers/scsi/sata_sil24.c

@@ -41,7 +41,7 @@
 #include <asm/io.h>
 
 #define DRV_NAME	"sata_sil24"
-#define DRV_VERSION	"0.20"	/* Silicon Image's preview driver was 0.10 */
+#define DRV_VERSION	"0.21"	/* Silicon Image's preview driver was 0.10 */
 
 #define NR_PORTS	4
 
@@ -426,15 +426,11 @@ static void sil24_irq_clear(struct ata_port *ap)
 	/* unused */
 }
 
-static void sil24_reset_controller(struct ata_port *ap)
+static int __sil24_reset_controller(void *port)
 {
-	void *port = (void *)ap->ioaddr.cmd_addr;
 	int cnt;
 	u32 tmp;
 
-	printk(KERN_NOTICE DRV_NAME
-	       " ata%u: resetting controller...\n", ap->id);
-
 	/* Reset controller state.  Is this correct? */
 	writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT);
 	readl(port + PORT_CTRL_STAT);	/* sync */
@@ -446,9 +442,19 @@ static void sil24_reset_controller(struct ata_port *ap)
 		if (!(tmp & PORT_CS_DEV_RST))
 			break;
 	}
+
 	if (tmp & PORT_CS_DEV_RST)
-		printk(KERN_ERR DRV_NAME
-		       " ata%u: failed to reset controller\n", ap->id);
+		return -1;
+	return 0;
+}
+
+static void sil24_reset_controller(struct ata_port *ap)
+{
+	printk(KERN_NOTICE DRV_NAME
+	       " ata%u: resetting controller...\n", ap->id);
+	if (__sil24_reset_controller((void *)ap->ioaddr.cmd_addr))
+                printk(KERN_ERR DRV_NAME
+                       " ata%u: failed to reset controller\n", ap->id);
 }
 
 static void sil24_eng_timeout(struct ata_port *ap)
@@ -740,6 +746,15 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		/* Clear interrupts */
 		writel(0x0fff0fff, port + PORT_IRQ_STAT);
 		writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
+
+		/* Clear port multiplier enable and resume bits */
+		writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR);
+
+		/* Reset itself */
+		if (__sil24_reset_controller(port))
+			printk(KERN_ERR DRV_NAME
+			       "(%s): failed to reset controller\n",
+			       pci_name(pdev));
 	}
 
 	/* Turn on interrupts */