Merge tag 'tty-4.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial fixes from Greg KH:
 "Here are some small tty/serial driver fixes for 4.1-rc2.

  They include some minor fixes that resolve reported issues, and a new
  device quirk.

  All have been in linux-next succesfully"

* tag 'tty-4.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: 8250_pci: Add support for 16 port Exar boards
  serial: samsung: fix serial console break
  tty/serial: at91: maxburst was missing for dma transfers
  serial: of-serial: Remove device_type = "serial" registration
  serial: xilinx: Use platform_get_irq to get irq description structure
  serial: core: Fix kernel-doc build warnings
  tty: Re-add external interface for tty_set_termios()

drivers/tty/serial/8250/8250_pci.c

@@ -1998,6 +1998,8 @@ pci_wch_ch38x_setup(struct serial_private *priv,
 #define PCIE_DEVICE_ID_WCH_CH382_2S1P	0x3250
 #define PCIE_DEVICE_ID_WCH_CH384_4S	0x3470
 
+#define PCI_DEVICE_ID_EXAR_XR17V8358	0x8358
+
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584	0x1584
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1588	0x1588
@@ -2520,6 +2522,13 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.setup		= pci_xr17v35x_setup,
 	},
+	{
+		.vendor = PCI_VENDOR_ID_EXAR,
+		.device = PCI_DEVICE_ID_EXAR_XR17V8358,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_xr17v35x_setup,
+	},
 	/*
 	 * Xircom cards
 	 */
@@ -2999,6 +3008,7 @@ enum pci_board_num_t {
 	pbn_exar_XR17V352,
 	pbn_exar_XR17V354,
 	pbn_exar_XR17V358,
+	pbn_exar_XR17V8358,
 	pbn_exar_ibm_saturn,
 	pbn_pasemi_1682M,
 	pbn_ni8430_2,
@@ -3685,6 +3695,14 @@ static struct pciserial_board pci_boards[] = {
 		.reg_shift	= 0,
 		.first_offset	= 0,
 	},
+	[pbn_exar_XR17V8358] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 16,
+		.base_baud	= 7812500,
+		.uart_offset	= 0x400,
+		.reg_shift	= 0,
+		.first_offset	= 0,
+	},
 	[pbn_exar_ibm_saturn] = {
 		.flags		= FL_BASE0,
 		.num_ports	= 1,
@@ -5080,7 +5098,7 @@ static struct pci_device_id serial_pci_tbl[] = {
 		0,
 		0, pbn_exar_XR17C158 },
 	/*
-	 * Exar Corp. XR17V35[248] Dual/Quad/Octal PCIe UARTs
+	 * Exar Corp. XR17V[48]35[248] Dual/Quad/Octal/Hexa PCIe UARTs
 	 */
 	{	PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V352,
 		PCI_ANY_ID, PCI_ANY_ID,
@@ -5094,7 +5112,10 @@ static struct pci_device_id serial_pci_tbl[] = {
 		PCI_ANY_ID, PCI_ANY_ID,
 		0,
 		0, pbn_exar_XR17V358 },
-
+	{	PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V8358,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_exar_XR17V8358 },
 	/*
 	 * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
 	 */

drivers/tty/serial/atmel_serial.c

@@ -880,6 +880,7 @@ static int atmel_prepare_tx_dma(struct uart_port *port)
 	config.direction = DMA_MEM_TO_DEV;
 	config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
 	config.dst_addr = port->mapbase + ATMEL_US_THR;
+	config.dst_maxburst = 1;
 
 	ret = dmaengine_slave_config(atmel_port->chan_tx,
 				     &config);
@@ -1059,6 +1060,7 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
 	config.direction = DMA_DEV_TO_MEM;
 	config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
 	config.src_addr = port->mapbase + ATMEL_US_RHR;
+	config.src_maxburst = 1;
 
 	ret = dmaengine_slave_config(atmel_port->chan_rx,
 				     &config);

drivers/tty/serial/of_serial.c

@@ -346,7 +346,6 @@ static const struct of_device_id of_platform_serial_table[] = {
 	{ .compatible = "ibm,qpace-nwp-serial",
 		.data = (void *)PORT_NWPSERIAL, },
 #endif
-	{ .type = "serial",         .data = (void *)PORT_UNKNOWN, },
 	{ /* end of list */ },
 };
 

drivers/tty/serial/samsung.c

@@ -1068,8 +1068,9 @@ static int s3c64xx_serial_startup(struct uart_port *port)
 	spin_lock_irqsave(&port->lock, flags);
 
 	ufcon = rd_regl(port, S3C2410_UFCON);
-	ufcon |= S3C2410_UFCON_RESETRX | S3C2410_UFCON_RESETTX |
-			S5PV210_UFCON_RXTRIG8;
+	ufcon |= S3C2410_UFCON_RESETRX | S5PV210_UFCON_RXTRIG8;
+	if (!uart_console(port))
+		ufcon |= S3C2410_UFCON_RESETTX;
 	wr_regl(port, S3C2410_UFCON, ufcon);
 
 	enable_rx_pio(ourport);

drivers/tty/serial/serial_core.c

@@ -1770,7 +1770,7 @@ static const struct file_operations uart_proc_fops = {
  *	@port: the port to write the message
  *	@s: array of characters
  *	@count: number of characters in string to write
- *	@write: function to write character to port
+ *	@putchar: function to write character to port
  */
 void uart_console_write(struct uart_port *port, const char *s,
 			unsigned int count,

drivers/tty/serial/uartlite.c

@@ -632,7 +632,8 @@ MODULE_DEVICE_TABLE(of, ulite_of_match);
 
 static int ulite_probe(struct platform_device *pdev)
 {
-	struct resource *res, *res2;
+	struct resource *res;
+	int irq;
 	int id = pdev->id;
 #ifdef CONFIG_OF
 	const __be32 *prop;
@@ -646,11 +647,11 @@ static int ulite_probe(struct platform_device *pdev)
 	if (!res)
 		return -ENODEV;
 
-	res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!res2)
-		return -ENODEV;
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0)
+		return -ENXIO;
 
-	return ulite_assign(&pdev->dev, id, res->start, res2->start);
+	return ulite_assign(&pdev->dev, id, res->start, irq);
 }
 
 static int ulite_remove(struct platform_device *pdev)

drivers/tty/serial/xilinx_uartps.c

@@ -1331,9 +1331,9 @@ static SIMPLE_DEV_PM_OPS(cdns_uart_dev_pm_ops, cdns_uart_suspend,
  */
 static int cdns_uart_probe(struct platform_device *pdev)
 {
-	int rc, id;
+	int rc, id, irq;
 	struct uart_port *port;
-	struct resource *res, *res2;
+	struct resource *res;
 	struct cdns_uart *cdns_uart_data;
 
 	cdns_uart_data = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_data),
@@ -1380,9 +1380,9 @@ static int cdns_uart_probe(struct platform_device *pdev)
 		goto err_out_clk_disable;
 	}
 
-	res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!res2) {
-		rc = -ENODEV;
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0) {
+		rc = -ENXIO;
 		goto err_out_clk_disable;
 	}
 
@@ -1411,7 +1411,7 @@ static int cdns_uart_probe(struct platform_device *pdev)
 		 * and triggers invocation of the config_port() entry point.
 		 */
 		port->mapbase = res->start;
-		port->irq = res2->start;
+		port->irq = irq;
 		port->dev = &pdev->dev;
 		port->uartclk = clk_get_rate(cdns_uart_data->uartclk);
 		port->private_data = cdns_uart_data;

drivers/tty/tty_ioctl.c

@@ -536,7 +536,7 @@ EXPORT_SYMBOL(tty_termios_hw_change);
  *	Locking: termios_rwsem
  */
 
-static int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios)
+int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios)
 {
 	struct ktermios old_termios;
 	struct tty_ldisc *ld;
@@ -569,6 +569,7 @@ static int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios)
 	up_write(&tty->termios_rwsem);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(tty_set_termios);
 
 /**
  *	set_termios		-	set termios values for a tty

include/linux/tty.h

@@ -491,6 +491,7 @@ static inline speed_t tty_get_baud_rate(struct tty_struct *tty)
 
 extern void tty_termios_copy_hw(struct ktermios *new, struct ktermios *old);
 extern int tty_termios_hw_change(struct ktermios *a, struct ktermios *b);
+extern int tty_set_termios(struct tty_struct *tty, struct ktermios *kt);
 
 extern struct tty_ldisc *tty_ldisc_ref(struct tty_struct *);
 extern void tty_ldisc_deref(struct tty_ldisc *);