Commit 92abf750 authored by Jianhua Xie's avatar Jianhua Xie Committed by David S. Miller

bonding: update bonding.txt for Layer2 hash factors

Document the Layer 2 hash factors with packet type ID field.

CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: David S. Miller <davem@davemloft.net>
CC: Pan Jiafei <Jiafei.Pan@freescale.com>
Signed-off-by: default avatarJianhua Xie <jianhua.xie@freescale.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent ce04d635
......@@ -542,10 +542,10 @@ mode
XOR policy: Transmit based on the selected transmit
hash policy. The default policy is a simple [(source
MAC address XOR'd with destination MAC address) modulo
slave count]. Alternate transmit policies may be
selected via the xmit_hash_policy option, described
below.
MAC address XOR'd with destination MAC address XOR
packet type ID) modulo slave count]. Alternate transmit
policies may be selected via the xmit_hash_policy option,
described below.
This mode provides load balancing and fault tolerance.
......@@ -801,10 +801,11 @@ xmit_hash_policy
layer2
Uses XOR of hardware MAC addresses to generate the
hash. The formula is
Uses XOR of hardware MAC addresses and packet type ID
field to generate the hash. The formula is
(source MAC XOR destination MAC) modulo slave count
hash = source MAC XOR destination MAC XOR packet type ID
slave number = hash modulo slave count
This algorithm will place all traffic to a particular
network peer on the same slave.
......@@ -819,7 +820,7 @@ xmit_hash_policy
Uses XOR of hardware MAC addresses and IP addresses to
generate the hash. The formula is
hash = source MAC XOR destination MAC
hash = source MAC XOR destination MAC XOR packet type ID
hash = hash XOR source IP XOR destination IP
hash = hash XOR (hash RSHIFT 16)
hash = hash XOR (hash RSHIFT 8)
......@@ -2301,13 +2302,13 @@ broadcast: Like active-backup, there is not much advantage to this
bandwidth.
Additionally, the linux bonding 802.3ad implementation
distributes traffic by peer (using an XOR of MAC addresses),
so in a "gatewayed" configuration, all outgoing traffic will
generally use the same device. Incoming traffic may also end
up on a single device, but that is dependent upon the
balancing policy of the peer's 8023.ad implementation. In a
"local" configuration, traffic will be distributed across the
devices in the bond.
distributes traffic by peer (using an XOR of MAC addresses
and packet type ID), so in a "gatewayed" configuration, all
outgoing traffic will generally use the same device. Incoming
traffic may also end up on a single device, but that is
dependent upon the balancing policy of the peer's 8023.ad
implementation. In a "local" configuration, traffic will be
distributed across the devices in the bond.
Finally, the 802.3ad mode mandates the use of the MII monitor,
therefore, the ARP monitor is not available in this mode.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment