Commit 92d3af9a authored by Brian Norris's avatar Brian Norris

mtd: st_spi_fsm: replace FLACH_CMD_* with SPINOR_OP_*

Begin to unify the differences between serial_flash_cmds.h and
spi-nor.h.
Signed-off-by: default avatarBrian Norris <computersforpeace@gmail.com>
Acked-by: default avatarLee Jones <lee.jones@linaro.org>
Reviewed-by: default avatarMarek Vasut <marex@denx.de>
parent a402191e
......@@ -13,43 +13,43 @@
#define _MTD_SERIAL_FLASH_CMDS_H
/* Generic Flash Commands/OPCODEs */
#define FLASH_CMD_WREN 0x06
#define FLASH_CMD_WRDI 0x04
#define FLASH_CMD_RDID 0x9f
#define FLASH_CMD_RDSR 0x05
#define FLASH_CMD_RDSR2 0x35
#define FLASH_CMD_WRSR 0x01
#define FLASH_CMD_SE_4K 0x20
#define FLASH_CMD_SE_32K 0x52
#define FLASH_CMD_SE 0xd8
#define FLASH_CMD_CHIPERASE 0xc7
#define FLASH_CMD_WRVCR 0x81
#define FLASH_CMD_RDVCR 0x85
#define SPINOR_OP_WREN 0x06
#define SPINOR_OP_WRDI 0x04
#define SPINOR_OP_RDID 0x9f
#define SPINOR_OP_RDSR 0x05
#define SPINOR_OP_RDSR2 0x35
#define SPINOR_OP_WRSR 0x01
#define SPINOR_OP_SE_4K 0x20
#define SPINOR_OP_SE_32K 0x52
#define SPINOR_OP_SE 0xd8
#define SPINOR_OP_CHIPERASE 0xc7
#define SPINOR_OP_WRVCR 0x81
#define SPINOR_OP_RDVCR 0x85
/* JEDEC Standard - Serial Flash Discoverable Parmeters (SFDP) Commands */
#define FLASH_CMD_READ 0x03 /* READ */
#define FLASH_CMD_READ_FAST 0x0b /* FAST READ */
#define FLASH_CMD_READ_1_1_2 0x3b /* DUAL OUTPUT READ */
#define FLASH_CMD_READ_1_2_2 0xbb /* DUAL I/O READ */
#define FLASH_CMD_READ_1_1_4 0x6b /* QUAD OUTPUT READ */
#define FLASH_CMD_READ_1_4_4 0xeb /* QUAD I/O READ */
#define SPINOR_OP_READ 0x03 /* READ */
#define SPINOR_OP_READ_FAST 0x0b /* FAST READ */
#define SPINOR_OP_READ_1_1_2 0x3b /* DUAL OUTPUT READ */
#define SPINOR_OP_READ_1_2_2 0xbb /* DUAL I/O READ */
#define SPINOR_OP_READ_1_1_4 0x6b /* QUAD OUTPUT READ */
#define SPINOR_OP_READ_1_4_4 0xeb /* QUAD I/O READ */
#define FLASH_CMD_WRITE 0x02 /* PAGE PROGRAM */
#define FLASH_CMD_WRITE_1_1_2 0xa2 /* DUAL INPUT PROGRAM */
#define FLASH_CMD_WRITE_1_2_2 0xd2 /* DUAL INPUT EXT PROGRAM */
#define FLASH_CMD_WRITE_1_1_4 0x32 /* QUAD INPUT PROGRAM */
#define FLASH_CMD_WRITE_1_4_4 0x12 /* QUAD INPUT EXT PROGRAM */
#define SPINOR_OP_WRITE 0x02 /* PAGE PROGRAM */
#define SPINOR_OP_WRITE_1_1_2 0xa2 /* DUAL INPUT PROGRAM */
#define SPINOR_OP_WRITE_1_2_2 0xd2 /* DUAL INPUT EXT PROGRAM */
#define SPINOR_OP_WRITE_1_1_4 0x32 /* QUAD INPUT PROGRAM */
#define SPINOR_OP_WRITE_1_4_4 0x12 /* QUAD INPUT EXT PROGRAM */
#define FLASH_CMD_EN4B_ADDR 0xb7 /* Enter 4-byte address mode */
#define FLASH_CMD_EX4B_ADDR 0xe9 /* Exit 4-byte address mode */
#define SPINOR_OP_EN4B_ADDR 0xb7 /* Enter 4-byte address mode */
#define SPINOR_OP_EX4B_ADDR 0xe9 /* Exit 4-byte address mode */
/* READ commands with 32-bit addressing */
#define FLASH_CMD_READ4 0x13
#define FLASH_CMD_READ4_FAST 0x0c
#define FLASH_CMD_READ4_1_1_2 0x3c
#define FLASH_CMD_READ4_1_2_2 0xbc
#define FLASH_CMD_READ4_1_1_4 0x6c
#define FLASH_CMD_READ4_1_4_4 0xec
#define SPINOR_OP_READ4 0x13
#define SPINOR_OP_READ4_FAST 0x0c
#define SPINOR_OP_READ4_1_1_2 0x3c
#define SPINOR_OP_READ4_1_2_2 0xbc
#define SPINOR_OP_READ4_1_1_4 0x6c
#define SPINOR_OP_READ4_1_4_4 0xec
/* Configuration flags */
#define FLASH_FLAG_SINGLE 0x000000ff
......
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment