Commit 939f7f0c authored by Michael Chan's avatar Michael Chan Committed by David S. Miller

bnxt_en: Add EEE setup code.

1. Add bnxt_hwrm_set_eee() function to setup EEE firmware parameters based
on the bp->eee settings.
2. The new function bnxt_eee_config_ok() will check if EEE parameters need
to be modified due to autoneg changes.
3. bnxt_hwrm_set_link() has added a new parameter to update EEE.  If the
parameter is set, it will call bnxt_hwrm_set_eee().
Signed-off-by: default avatarMichael Chan <michael.chan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 170ce013
......@@ -4711,7 +4711,30 @@ int bnxt_hwrm_set_pause(struct bnxt *bp)
return rc;
}
int bnxt_hwrm_set_link_setting(struct bnxt *bp, bool set_pause)
static void bnxt_hwrm_set_eee(struct bnxt *bp,
struct hwrm_port_phy_cfg_input *req)
{
struct ethtool_eee *eee = &bp->eee;
if (eee->eee_enabled) {
u16 eee_speeds;
u32 flags = PORT_PHY_CFG_REQ_FLAGS_EEE_ENABLE;
if (eee->tx_lpi_enabled)
flags |= PORT_PHY_CFG_REQ_FLAGS_EEE_TX_LPI_ENABLE;
else
flags |= PORT_PHY_CFG_REQ_FLAGS_EEE_TX_LPI_DISABLE;
req->flags |= cpu_to_le32(flags);
eee_speeds = bnxt_get_fw_auto_link_speeds(eee->advertised);
req->eee_link_speed_mask = cpu_to_le16(eee_speeds);
req->tx_lpi_timer = cpu_to_le32(eee->tx_lpi_timer);
} else {
req->flags |= cpu_to_le32(PORT_PHY_CFG_REQ_FLAGS_EEE_DISABLE);
}
}
int bnxt_hwrm_set_link_setting(struct bnxt *bp, bool set_pause, bool set_eee)
{
struct hwrm_port_phy_cfg_input req = {0};
......@@ -4720,14 +4743,42 @@ int bnxt_hwrm_set_link_setting(struct bnxt *bp, bool set_pause)
bnxt_hwrm_set_pause_common(bp, &req);
bnxt_hwrm_set_link_common(bp, &req);
if (set_eee)
bnxt_hwrm_set_eee(bp, &req);
return hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT);
}
static bool bnxt_eee_config_ok(struct bnxt *bp)
{
struct ethtool_eee *eee = &bp->eee;
struct bnxt_link_info *link_info = &bp->link_info;
if (!(bp->flags & BNXT_FLAG_EEE_CAP))
return true;
if (eee->eee_enabled) {
u32 advertising =
_bnxt_fw_to_ethtool_adv_spds(link_info->advertising, 0);
if (!(link_info->autoneg & BNXT_AUTONEG_SPEED)) {
eee->eee_enabled = 0;
return false;
}
if (eee->advertised & ~advertising) {
eee->advertised = advertising & eee->supported;
return false;
}
}
return true;
}
static int bnxt_update_phy_setting(struct bnxt *bp)
{
int rc;
bool update_link = false;
bool update_pause = false;
bool update_eee = false;
struct bnxt_link_info *link_info = &bp->link_info;
rc = bnxt_update_link(bp, true);
......@@ -4757,8 +4808,11 @@ static int bnxt_update_phy_setting(struct bnxt *bp)
update_link = true;
}
if (!bnxt_eee_config_ok(bp))
update_eee = true;
if (update_link)
rc = bnxt_hwrm_set_link_setting(bp, update_pause);
rc = bnxt_hwrm_set_link_setting(bp, update_pause, update_eee);
else if (update_pause)
rc = bnxt_hwrm_set_pause(bp);
if (rc) {
......
......@@ -1112,7 +1112,7 @@ int hwrm_send_message_silent(struct bnxt *, void *, u32, int);
int bnxt_hwrm_set_coal(struct bnxt *);
int bnxt_hwrm_func_qcaps(struct bnxt *);
int bnxt_hwrm_set_pause(struct bnxt *);
int bnxt_hwrm_set_link_setting(struct bnxt *, bool);
int bnxt_hwrm_set_link_setting(struct bnxt *, bool, bool);
int bnxt_open_nic(struct bnxt *, bool, bool);
int bnxt_close_nic(struct bnxt *, bool, bool);
int bnxt_get_max_rings(struct bnxt *, int *, int *, bool);
......
......@@ -763,7 +763,7 @@ static u32 bnxt_get_fw_speed(struct net_device *dev, u16 ethtool_speed)
return 0;
}
static u16 bnxt_get_fw_auto_link_speeds(u32 advertising)
u16 bnxt_get_fw_auto_link_speeds(u32 advertising)
{
u16 fw_speed_mask = 0;
......@@ -840,7 +840,7 @@ static int bnxt_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
}
if (netif_running(dev))
rc = bnxt_hwrm_set_link_setting(bp, set_pause);
rc = bnxt_hwrm_set_link_setting(bp, set_pause, false);
set_setting_exit:
return rc;
......
......@@ -14,5 +14,6 @@ extern const struct ethtool_ops bnxt_ethtool_ops;
u32 _bnxt_fw_to_ethtool_adv_spds(u16, u8);
u32 bnxt_fw_to_ethtool_speed(u16);
u16 bnxt_get_fw_auto_link_speeds(u32);
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment