Merge branch 'Raw-PHY-TDR-data'

Andrew Lunn says:

====================
Raw PHY TDR data

Some ethernet PHYs allow access to raw TDR data in addition to summary
diagnostics information. Add support for retrieving this data via
netlink ethtool. The basic structure in the core is the same as for
normal phy diagnostics, the PHY driver simply uses different helpers
to fill the netlink message with different data.

There is a graphical tool under development, as well a ethtool(1)
which can dump the data as text and JSON.

A patched ethtool(1) can be found in
https://github.com/lunn/ethtool.git feature/cable-test-v5

Thanks for Chris Healy for lots of testing.

v2:
See the individual patches but:

Pass distances in centimeters, not meters

Allow the PHY to round distances to what it supports and report what
it actually used along with the results.

Make the Marvell PHY use steps a multiple of 0.805 meters, its native
step size.

v3:
Move the TDR configuration into a structure
Add a range check on step
Use NL_SET_ERR_MSG_ATTR() when appropriate
Move TDR configuration into a nest
Document attributes in the request
Unsquash the last two patches
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/networking/ethtool-netlink.rst

@@ -205,6 +205,7 @@ Userspace to kernel:
   ``ETHTOOL_MSG_EEE_SET``               set EEE settings
   ``ETHTOOL_MSG_TSINFO_GET``		get timestamping info
   ``ETHTOOL_MSG_CABLE_TEST_ACT``        action start cable test
+  ``ETHTOOL_MSG_CABLE_TEST_TDR_ACT``    action start raw TDR cable test
   ===================================== ================================
 
 Kernel to userspace:
@@ -237,6 +238,7 @@ Kernel to userspace:
   ``ETHTOOL_MSG_EEE_NTF``               EEE settings
   ``ETHTOOL_MSG_TSINFO_GET_REPLY``	timestamping info
   ``ETHTOOL_MSG_CABLE_TEST_NTF``        Cable test results
+  ``ETHTOOL_MSG_CABLE_TEST_TDR_NTF``    Cable test TDR results
   ===================================== =================================
 
 ``GET`` requests are sent by userspace applications to retrieve device
@@ -1014,6 +1016,100 @@ information.
  | | | ``ETHTOOL_A_CABLE_FAULT_LENGTH_CM``     | u32    | length in cm        |
  +-+-+-----------------------------------------+--------+---------------------+
 
+CABLE_TEST TDR
+==============
+
+Start a cable test and report raw TDR data
+
+Request contents:
+
+ +--------------------------------------------+--------+-----------------------+
+ | ``ETHTOOL_A_CABLE_TEST_TDR_HEADER``        | nested | reply header          |
+ +--------------------------------------------+--------+-----------------------+
+ | ``ETHTOOL_A_CABLE_TEST_TDR_CFG``           | nested | test configuration    |
+ +-+------------------------------------------+--------+-----------------------+
+ | | ``ETHTOOL_A_CABLE_STEP_FIRST_DISTANCE `` | u32    | first data distance   |
+ +-+-+----------------------------------------+--------+-----------------------+
+ | | ``ETHTOOL_A_CABLE_STEP_LAST_DISTANCE ``  | u32    | last data distance    |
+ +-+-+----------------------------------------+--------+-----------------------+
+ | | ``ETHTOOL_A_CABLE_STEP_STEP_DISTANCE ``  | u32    | distance of each step |
+ +-+-+----------------------------------------+--------+-----------------------+
+ | | ``ETHTOOL_A_CABLE_TEST_TDR_CFG_PAIR``    | u8     | pair to test          |
+ +-+-+----------------------------------------+--------+-----------------------+
+
+The ETHTOOL_A_CABLE_TEST_TDR_CFG is optional, as well as all members
+of the nest. All distances are expressed in centimeters. The PHY takes
+the distances as a guide, and rounds to the nearest distance it
+actually supports. If a pair is passed, only that one pair will be
+tested. Otherwise all pairs are tested.
+
+Notification contents:
+
+Raw TDR data is gathered by sending a pulse down the cable and
+recording the amplitude of the reflected pulse for a given distance.
+
+It can take a number of seconds to collect TDR data, especial if the
+full 100 meters is probed at 1 meter intervals. When the test is
+started a notification will be sent containing just
+ETHTOOL_A_CABLE_TEST_TDR_STATUS with the value
+ETHTOOL_A_CABLE_TEST_NTF_STATUS_STARTED.
+
+When the test has completed a second notification will be sent
+containing ETHTOOL_A_CABLE_TEST_TDR_STATUS with the value
+ETHTOOL_A_CABLE_TEST_NTF_STATUS_COMPLETED and the TDR data.
+
+The message may optionally contain the amplitude of the pulse send
+down the cable. This is measured in mV. A reflection should not be
+bigger than transmitted pulse.
+
+Before the raw TDR data should be an ETHTOOL_A_CABLE_TDR_NEST_STEP
+nest containing information about the distance along the cable for the
+first reading, the last reading, and the step between each
+reading. Distances are measured in centimeters. These should be the
+exact values the PHY used. These may be different to what the user
+requested, if the native measurement resolution is greater than 1 cm.
+
+For each step along the cable, a ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE is
+used to report the amplitude of the reflection for a given pair.
+
+ +---------------------------------------------+--------+----------------------+
+ | ``ETHTOOL_A_CABLE_TEST_TDR_HEADER``         | nested | reply header         |
+ +---------------------------------------------+--------+----------------------+
+ | ``ETHTOOL_A_CABLE_TEST_TDR_STATUS``         | u8     | completed            |
+ +---------------------------------------------+--------+----------------------+
+ | ``ETHTOOL_A_CABLE_TEST_TDR_NTF_NEST``       | nested | all the results      |
+ +-+-------------------------------------------+--------+----------------------+
+ | | ``ETHTOOL_A_CABLE_TDR_NEST_PULSE``        | nested | TX Pulse amplitude   |
+ +-+-+-----------------------------------------+--------+----------------------+
+ | | | ``ETHTOOL_A_CABLE_PULSE_mV``            | s16    | Pulse amplitude      |
+ +-+-+-----------------------------------------+--------+----------------------+
+ | | ``ETHTOOL_A_CABLE_NEST_STEP``             | nested | TDR step info        |
+ +-+-+-----------------------------------------+--------+----------------------+
+ | | | ``ETHTOOL_A_CABLE_STEP_FIRST_DISTANCE ``| u32    | First data distance  |
+ +-+-+-----------------------------------------+--------+----------------------+
+ | | | ``ETHTOOL_A_CABLE_STEP_LAST_DISTANCE `` | u32    | Last data distance   |
+ +-+-+-----------------------------------------+--------+----------------------+
+ | | | ``ETHTOOL_A_CABLE_STEP_STEP_DISTANCE `` | u32    | distance of each step|
+ +-+-+-----------------------------------------+--------+----------------------+
+ | | ``ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE``    | nested | Reflection amplitude |
+ +-+-+-----------------------------------------+--------+----------------------+
+ | | | ``ETHTOOL_A_CABLE_RESULTS_PAIR``        | u8     | pair number          |
+ +-+-+-----------------------------------------+--------+----------------------+
+ | | | ``ETHTOOL_A_CABLE_AMPLITUDE_mV``        | s16    | Reflection amplitude |
+ +-+-+-----------------------------------------+--------+----------------------+
+ | | ``ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE``    | nested | Reflection amplitude |
+ +-+-+-----------------------------------------+--------+----------------------+
+ | | | ``ETHTOOL_A_CABLE_RESULTS_PAIR``        | u8     | pair number          |
+ +-+-+-----------------------------------------+--------+----------------------+
+ | | | ``ETHTOOL_A_CABLE_AMPLITUDE_mV``        | s16    | Reflection amplitude |
+ +-+-+-----------------------------------------+--------+----------------------+
+ | | ``ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE``    | nested | Reflection amplitude |
+ +-+-+-----------------------------------------+--------+----------------------+
+ | | | ``ETHTOOL_A_CABLE_RESULTS_PAIR``        | u8     | pair number          |
+ +-+-+-----------------------------------------+--------+----------------------+
+ | | | ``ETHTOOL_A_CABLE_AMPLITUDE_mV``        | s16    | Reflection amplitude |
+ +-+-+-----------------------------------------+--------+----------------------+
+
 Request translation
 ===================
 
@@ -1110,4 +1206,5 @@ are netlink only.
   ``ETHTOOL_GFECPARAM``               n/a
   ``ETHTOOL_SFECPARAM``               n/a
   n/a                                 ''ETHTOOL_MSG_CABLE_TEST_ACT''
+  n/a                                 ''ETHTOOL_MSG_CABLE_TEST_TDR_ACT''
   =================================== =====================================

drivers/net/phy/nxp-tja11xx.c

@@ -194,7 +194,7 @@ static int tja11xx_config_aneg_cable_test(struct phy_device *phydev)
 	    !phydev->drv->cable_test_get_status)
 		return 0;
 
-	ret = ethnl_cable_test_alloc(phydev);
+	ret = ethnl_cable_test_alloc(phydev, ETHTOOL_MSG_CABLE_TEST_NTF);
 	if (ret)
 		return ret;
 

drivers/net/phy/phy.c

@@ -519,7 +519,7 @@ int phy_start_cable_test(struct phy_device *phydev,
 		goto out;
 	}
 
-	err = ethnl_cable_test_alloc(phydev);
+	err = ethnl_cable_test_alloc(phydev, ETHTOOL_MSG_CABLE_TEST_NTF);
 	if (err)
 		goto out;
 
@@ -552,6 +552,70 @@ int phy_start_cable_test(struct phy_device *phydev,
 }
 EXPORT_SYMBOL(phy_start_cable_test);
 
+int phy_start_cable_test_tdr(struct phy_device *phydev,
+			     struct netlink_ext_ack *extack,
+			     const struct phy_tdr_config *config)
+{
+	struct net_device *dev = phydev->attached_dev;
+	int err = -ENOMEM;
+
+	if (!(phydev->drv &&
+	      phydev->drv->cable_test_tdr_start &&
+	      phydev->drv->cable_test_get_status)) {
+		NL_SET_ERR_MSG(extack,
+			       "PHY driver does not support cable test TDR");
+		return -EOPNOTSUPP;
+	}
+
+	mutex_lock(&phydev->lock);
+	if (phydev->state == PHY_CABLETEST) {
+		NL_SET_ERR_MSG(extack,
+			       "PHY already performing a test");
+		err = -EBUSY;
+		goto out;
+	}
+
+	if (phydev->state < PHY_UP ||
+	    phydev->state > PHY_CABLETEST) {
+		NL_SET_ERR_MSG(extack,
+			       "PHY not configured. Try setting interface up");
+		err = -EBUSY;
+		goto out;
+	}
+
+	err = ethnl_cable_test_alloc(phydev, ETHTOOL_MSG_CABLE_TEST_TDR_NTF);
+	if (err)
+		goto out;
+
+	/* Mark the carrier down until the test is complete */
+	phy_link_down(phydev);
+
+	netif_testing_on(dev);
+	err = phydev->drv->cable_test_tdr_start(phydev, config);
+	if (err) {
+		netif_testing_off(dev);
+		phy_link_up(phydev);
+		goto out_free;
+	}
+
+	phydev->state = PHY_CABLETEST;
+
+	if (phy_polling_mode(phydev))
+		phy_trigger_machine(phydev);
+
+	mutex_unlock(&phydev->lock);
+
+	return 0;
+
+out_free:
+	ethnl_cable_test_free(phydev);
+out:
+	mutex_unlock(&phydev->lock);
+
+	return err;
+}
+EXPORT_SYMBOL(phy_start_cable_test_tdr);
+
 static int phy_config_aneg(struct phy_device *phydev)
 {
 	if (phydev->drv->config_aneg)

include/linux/ethtool_netlink.h

@@ -17,13 +17,17 @@ enum ethtool_multicast_groups {
 struct phy_device;
 
 #if IS_ENABLED(CONFIG_ETHTOOL_NETLINK)
-int ethnl_cable_test_alloc(struct phy_device *phydev);
+int ethnl_cable_test_alloc(struct phy_device *phydev, u8 cmd);
 void ethnl_cable_test_free(struct phy_device *phydev);
 void ethnl_cable_test_finished(struct phy_device *phydev);
 int ethnl_cable_test_result(struct phy_device *phydev, u8 pair, u8 result);
 int ethnl_cable_test_fault_length(struct phy_device *phydev, u8 pair, u32 cm);
+int ethnl_cable_test_amplitude(struct phy_device *phydev, u8 pair, s16 mV);
+int ethnl_cable_test_pulse(struct phy_device *phydev, u16 mV);
+int ethnl_cable_test_step(struct phy_device *phydev, u32 first, u32 last,
+			  u32 step);
 #else
-static inline int ethnl_cable_test_alloc(struct phy_device *phydev)
+static inline int ethnl_cable_test_alloc(struct phy_device *phydev, u8 cmd)
 {
 	return -EOPNOTSUPP;
 }
@@ -46,5 +50,22 @@ static inline int ethnl_cable_test_fault_length(struct phy_device *phydev,
 {
 	return -EOPNOTSUPP;
 }
+
+static inline int ethnl_cable_test_amplitude(struct phy_device *phydev,
+					     u8 pair, s16 mV)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int ethnl_cable_test_pulse(struct phy_device *phydev, u16 mV)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int ethnl_cable_test_step(struct phy_device *phydev, u32 first,
+					u32 last, u32 step)
+{
+	return -EOPNOTSUPP;
+}
 #endif /* IS_ENABLED(ETHTOOL_NETLINK) */
 #endif /* _LINUX_ETHTOOL_NETLINK_H_ */

include/linux/phy.h

@@ -548,6 +548,18 @@ struct phy_device {
 #define to_phy_device(d) container_of(to_mdio_device(d), \
 				      struct phy_device, mdio)
 
+/* A structure containing possible configuration parameters
+ * for a TDR cable test. The driver does not need to implement
+ * all the parameters, but should report what is actually used.
+ */
+struct phy_tdr_config {
+	u32 first;
+	u32 last;
+	u32 step;
+	s8 pair;
+};
+#define PHY_PAIR_ALL -1
+
 /* struct phy_driver: Driver structure for a particular PHY type
  *
  * driver_data: static driver data
@@ -699,6 +711,11 @@ struct phy_driver {
 
 	/* Start a cable test */
 	int (*cable_test_start)(struct phy_device *dev);
+
+	/* Start a raw TDR cable test */
+	int (*cable_test_tdr_start)(struct phy_device *dev,
+				    const struct phy_tdr_config *config);
+
 	/* Once per second, or on interrupt, request the status of the
 	 * test.
 	 */
@@ -1251,6 +1268,9 @@ int phy_reset_after_clk_enable(struct phy_device *phydev);
 #if IS_ENABLED(CONFIG_PHYLIB)
 int phy_start_cable_test(struct phy_device *phydev,
 			 struct netlink_ext_ack *extack);
+int phy_start_cable_test_tdr(struct phy_device *phydev,
+			     struct netlink_ext_ack *extack,
+			     const struct phy_tdr_config *config);
 #else
 static inline
 int phy_start_cable_test(struct phy_device *phydev,
@@ -1259,6 +1279,14 @@ int phy_start_cable_test(struct phy_device *phydev,
 	NL_SET_ERR_MSG(extack, "Kernel not compiled with PHYLIB support");
 	return -EOPNOTSUPP;
 }
+static inline
+int phy_start_cable_test_tdr(struct phy_device *phydev,
+			     struct netlink_ext_ack *extack,
+			     const struct phy_tdr_config *config)
+{
+	NL_SET_ERR_MSG(extack, "Kernel not compiled with PHYLIB support");
+	return -EOPNOTSUPP;
+}
 #endif
 
 int phy_cable_test_result(struct phy_device *phydev, u8 pair, u16 result);

include/uapi/linux/ethtool_netlink.h

@@ -40,6 +40,7 @@ enum {
 	ETHTOOL_MSG_EEE_SET,
 	ETHTOOL_MSG_TSINFO_GET,
 	ETHTOOL_MSG_CABLE_TEST_ACT,
+	ETHTOOL_MSG_CABLE_TEST_TDR_ACT,
 
 	/* add new constants above here */
 	__ETHTOOL_MSG_USER_CNT,
@@ -76,6 +77,7 @@ enum {
 	ETHTOOL_MSG_EEE_NTF,
 	ETHTOOL_MSG_TSINFO_GET_REPLY,
 	ETHTOOL_MSG_CABLE_TEST_NTF,
+	ETHTOOL_MSG_CABLE_TEST_TDR_NTF,
 
 	/* add new constants above here */
 	__ETHTOOL_MSG_KERNEL_CNT,
@@ -478,6 +480,80 @@ enum {
 	ETHTOOL_A_CABLE_TEST_NTF_MAX = (__ETHTOOL_A_CABLE_TEST_NTF_CNT - 1)
 };
 
+/* CABLE TEST TDR */
+
+enum {
+	ETHTOOL_A_CABLE_TEST_TDR_CFG_UNSPEC,
+	ETHTOOL_A_CABLE_TEST_TDR_CFG_FIRST,		/* u32 */
+	ETHTOOL_A_CABLE_TEST_TDR_CFG_LAST,		/* u32 */
+	ETHTOOL_A_CABLE_TEST_TDR_CFG_STEP,		/* u32 */
+	ETHTOOL_A_CABLE_TEST_TDR_CFG_PAIR,		/* u8 */
+
+	/* add new constants above here */
+	__ETHTOOL_A_CABLE_TEST_TDR_CFG_CNT,
+	ETHTOOL_A_CABLE_TEST_TDR_CFG_MAX = __ETHTOOL_A_CABLE_TEST_TDR_CFG_CNT - 1
+};
+
+enum {
+	ETHTOOL_A_CABLE_TEST_TDR_UNSPEC,
+	ETHTOOL_A_CABLE_TEST_TDR_HEADER,	/* nest - _A_HEADER_* */
+	ETHTOOL_A_CABLE_TEST_TDR_CFG,		/* nest - *_TDR_CFG_* */
+
+	/* add new constants above here */
+	__ETHTOOL_A_CABLE_TEST_TDR_CNT,
+	ETHTOOL_A_CABLE_TEST_TDR_MAX = __ETHTOOL_A_CABLE_TEST_TDR_CNT - 1
+};
+
+/* CABLE TEST TDR NOTIFY */
+
+enum {
+	ETHTOOL_A_CABLE_AMPLITUDE_UNSPEC,
+	ETHTOOL_A_CABLE_AMPLITUDE_PAIR,         /* u8 */
+	ETHTOOL_A_CABLE_AMPLITUDE_mV,           /* s16 */
+
+	__ETHTOOL_A_CABLE_AMPLITUDE_CNT,
+	ETHTOOL_A_CABLE_AMPLITUDE_MAX = (__ETHTOOL_A_CABLE_AMPLITUDE_CNT - 1)
+};
+
+enum {
+	ETHTOOL_A_CABLE_PULSE_UNSPEC,
+	ETHTOOL_A_CABLE_PULSE_mV,		/* s16 */
+
+	__ETHTOOL_A_CABLE_PULSE_CNT,
+	ETHTOOL_A_CABLE_PULSE_MAX = (__ETHTOOL_A_CABLE_PULSE_CNT - 1)
+};
+
+enum {
+	ETHTOOL_A_CABLE_STEP_UNSPEC,
+	ETHTOOL_A_CABLE_STEP_FIRST_DISTANCE,	/* u32 */
+	ETHTOOL_A_CABLE_STEP_LAST_DISTANCE,	/* u32 */
+	ETHTOOL_A_CABLE_STEP_STEP_DISTANCE,	/* u32 */
+
+	__ETHTOOL_A_CABLE_STEP_CNT,
+	ETHTOOL_A_CABLE_STEP_MAX = (__ETHTOOL_A_CABLE_STEP_CNT - 1)
+};
+
+enum {
+	ETHTOOL_A_CABLE_TDR_NEST_UNSPEC,
+	ETHTOOL_A_CABLE_TDR_NEST_STEP,		/* nest - ETHTTOOL_A_CABLE_STEP */
+	ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE,	/* nest - ETHTOOL_A_CABLE_AMPLITUDE */
+	ETHTOOL_A_CABLE_TDR_NEST_PULSE,		/* nest - ETHTOOL_A_CABLE_PULSE */
+
+	__ETHTOOL_A_CABLE_TDR_NEST_CNT,
+	ETHTOOL_A_CABLE_TDR_NEST_MAX = (__ETHTOOL_A_CABLE_TDR_NEST_CNT - 1)
+};
+
+enum {
+	ETHTOOL_A_CABLE_TEST_TDR_NTF_UNSPEC,
+	ETHTOOL_A_CABLE_TEST_TDR_NTF_HEADER,	/* nest - ETHTOOL_A_HEADER_* */
+	ETHTOOL_A_CABLE_TEST_TDR_NTF_STATUS,	/* u8 - _STARTED/_COMPLETE */
+	ETHTOOL_A_CABLE_TEST_TDR_NTF_NEST,	/* nest - of results: */
+
+	/* add new constants above here */
+	__ETHTOOL_A_CABLE_TEST_TDR_NTF_CNT,
+	ETHTOOL_A_CABLE_TEST_TDR_NTF_MAX = __ETHTOOL_A_CABLE_TEST_TDR_NTF_CNT - 1
+};
+
 /* generic netlink info */
 #define ETHTOOL_GENL_NAME "ethtool"
 #define ETHTOOL_GENL_VERSION 1

net/ethtool/cabletest.c

@@ -5,7 +5,11 @@
 #include "netlink.h"
 #include "common.h"
 
-/* CABLE_TEST_ACT */
+/* 802.3 standard allows 100 meters for BaseT cables. However longer
+ * cables might work, depending on the quality of the cables and the
+ * PHY. So allow testing for up to 150 meters.
+ */
+#define MAX_CABLE_LENGTH_CM (150 * 100)
 
 static const struct nla_policy
 cable_test_act_policy[ETHTOOL_A_CABLE_TEST_MAX + 1] = {
@@ -13,7 +17,7 @@ cable_test_act_policy[ETHTOOL_A_CABLE_TEST_MAX + 1] = {
 	[ETHTOOL_A_CABLE_TEST_HEADER]		= { .type = NLA_NESTED },
 };
 
-static int ethnl_cable_test_started(struct phy_device *phydev)
+static int ethnl_cable_test_started(struct phy_device *phydev, u8 cmd)
 {
 	struct sk_buff *skb;
 	int err = -ENOMEM;
@@ -23,7 +27,7 @@ static int ethnl_cable_test_started(struct phy_device *phydev)
 	if (!skb)
 		goto out;
 
-	ehdr = ethnl_bcastmsg_put(skb, ETHTOOL_MSG_CABLE_TEST_NTF);
+	ehdr = ethnl_bcastmsg_put(skb, cmd);
 	if (!ehdr) {
 		err = -EMSGSIZE;
 		goto out;
@@ -86,7 +90,8 @@ int ethnl_act_cable_test(struct sk_buff *skb, struct genl_info *info)
 	ethnl_ops_complete(dev);
 
 	if (!ret)
-		ethnl_cable_test_started(dev->phydev);
+		ethnl_cable_test_started(dev->phydev,
+					 ETHTOOL_MSG_CABLE_TEST_NTF);
 
 out_rtnl:
 	rtnl_unlock();
@@ -95,16 +100,18 @@ int ethnl_act_cable_test(struct sk_buff *skb, struct genl_info *info)
 	return ret;
 }
 
-int ethnl_cable_test_alloc(struct phy_device *phydev)
+int ethnl_cable_test_alloc(struct phy_device *phydev, u8 cmd)
 {
 	int err = -ENOMEM;
 
-	phydev->skb = genlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	/* One TDR sample occupies 20 bytes. For a 150 meter cable,
+	 * with four pairs, around 12K is needed.
+	 */
+	phydev->skb = genlmsg_new(SZ_16K, GFP_KERNEL);
 	if (!phydev->skb)
 		goto out;
 
-	phydev->ehdr = ethnl_bcastmsg_put(phydev->skb,
-					  ETHTOOL_MSG_CABLE_TEST_NTF);
+	phydev->ehdr = ethnl_bcastmsg_put(phydev->skb, cmd);
 	if (!phydev->ehdr) {
 		err = -EMSGSIZE;
 		goto out;
@@ -199,3 +206,226 @@ int ethnl_cable_test_fault_length(struct phy_device *phydev, u8 pair, u32 cm)
 	return ret;
 }
 EXPORT_SYMBOL_GPL(ethnl_cable_test_fault_length);
+
+struct cable_test_tdr_req_info {
+	struct ethnl_req_info		base;
+};
+
+static const struct nla_policy
+cable_test_tdr_act_cfg_policy[ETHTOOL_A_CABLE_TEST_TDR_CFG_MAX + 1] = {
+	[ETHTOOL_A_CABLE_TEST_TDR_CFG_FIRST]	= { .type = NLA_U32 },
+	[ETHTOOL_A_CABLE_TEST_TDR_CFG_LAST]	= { .type = NLA_U32 },
+	[ETHTOOL_A_CABLE_TEST_TDR_CFG_STEP]	= { .type = NLA_U32 },
+	[ETHTOOL_A_CABLE_TEST_TDR_CFG_PAIR]	= { .type = NLA_U8 },
+};
+
+static const struct nla_policy
+cable_test_tdr_act_policy[ETHTOOL_A_CABLE_TEST_TDR_MAX + 1] = {
+	[ETHTOOL_A_CABLE_TEST_TDR_UNSPEC]	= { .type = NLA_REJECT },
+	[ETHTOOL_A_CABLE_TEST_TDR_HEADER]	= { .type = NLA_NESTED },
+	[ETHTOOL_A_CABLE_TEST_TDR_CFG]		= { .type = NLA_NESTED },
+};
+
+/* CABLE_TEST_TDR_ACT */
+int ethnl_act_cable_test_tdr_cfg(const struct nlattr *nest,
+				 struct genl_info *info,
+				 struct phy_tdr_config *cfg)
+{
+	struct nlattr *tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_MAX + 1];
+	int ret;
+
+	ret = nla_parse_nested(tb, ETHTOOL_A_CABLE_TEST_TDR_CFG_MAX, nest,
+			       cable_test_tdr_act_cfg_policy, info->extack);
+	if (ret < 0)
+		return ret;
+
+	if (tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_FIRST])
+		cfg->first = nla_get_u32(
+			tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_FIRST]);
+	else
+		cfg->first = 100;
+	if (tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_LAST])
+		cfg->last = nla_get_u32(tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_LAST]);
+	else
+		cfg->last = MAX_CABLE_LENGTH_CM;
+
+	if (tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_STEP])
+		cfg->step = nla_get_u32(tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_STEP]);
+	else
+		cfg->step = 100;
+
+	if (tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_PAIR]) {
+		cfg->pair = nla_get_u8(tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_PAIR]);
+		if (cfg->pair > ETHTOOL_A_CABLE_PAIR_D) {
+			NL_SET_ERR_MSG_ATTR(
+				info->extack,
+				tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_PAIR],
+				"invalid pair parameter");
+			return -EINVAL;
+		}
+	} else {
+		cfg->pair = PHY_PAIR_ALL;
+	}
+
+	if (cfg->first > MAX_CABLE_LENGTH_CM) {
+		NL_SET_ERR_MSG_ATTR(info->extack,
+				    tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_FIRST],
+				    "invalid first parameter");
+		return -EINVAL;
+	}
+
+	if (cfg->last > MAX_CABLE_LENGTH_CM) {
+		NL_SET_ERR_MSG_ATTR(info->extack,
+				    tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_LAST],
+				    "invalid last parameter");
+		return -EINVAL;
+	}
+
+	if (cfg->first > cfg->last) {
+		NL_SET_ERR_MSG(info->extack, "invalid first/last parameter");
+		return -EINVAL;
+	}
+
+	if (!cfg->step) {
+		NL_SET_ERR_MSG_ATTR(info->extack,
+				    tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_STEP],
+				    "invalid step parameter");
+		return -EINVAL;
+	}
+
+	if (cfg->step > (cfg->last - cfg->first)) {
+		NL_SET_ERR_MSG_ATTR(info->extack,
+				    tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_STEP],
+				    "step parameter too big");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+int ethnl_act_cable_test_tdr(struct sk_buff *skb, struct genl_info *info)
+{
+	struct nlattr *tb[ETHTOOL_A_CABLE_TEST_TDR_MAX + 1];
+	struct ethnl_req_info req_info = {};
+	struct phy_tdr_config cfg;
+	struct net_device *dev;
+	int ret;
+
+	ret = nlmsg_parse(info->nlhdr, GENL_HDRLEN, tb,
+			  ETHTOOL_A_CABLE_TEST_TDR_MAX,
+			  cable_test_tdr_act_policy, info->extack);
+	if (ret < 0)
+		return ret;
+
+	ret = ethnl_parse_header_dev_get(&req_info,
+					 tb[ETHTOOL_A_CABLE_TEST_TDR_HEADER],
+					 genl_info_net(info), info->extack,
+					 true);
+	if (ret < 0)
+		return ret;
+
+	dev = req_info.dev;
+	if (!dev->phydev) {
+		ret = -EOPNOTSUPP;
+		goto out_dev_put;
+	}
+
+	ret = ethnl_act_cable_test_tdr_cfg(tb[ETHTOOL_A_CABLE_TEST_TDR_CFG],
+					   info, &cfg);
+	if (ret)
+		goto out_dev_put;
+
+	rtnl_lock();
+	ret = ethnl_ops_begin(dev);
+	if (ret < 0)
+		goto out_rtnl;
+
+	ret = phy_start_cable_test_tdr(dev->phydev, info->extack, &cfg);
+
+	ethnl_ops_complete(dev);
+
+	if (!ret)
+		ethnl_cable_test_started(dev->phydev,
+					 ETHTOOL_MSG_CABLE_TEST_TDR_NTF);
+
+out_rtnl:
+	rtnl_unlock();
+out_dev_put:
+	dev_put(dev);
+	return ret;
+}
+ 
+int ethnl_cable_test_amplitude(struct phy_device *phydev,
+			       u8 pair, s16 mV)
+{
+	struct nlattr *nest;
+	int ret = -EMSGSIZE;
+
+	nest = nla_nest_start(phydev->skb,
+			      ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE);
+	if (!nest)
+		return -EMSGSIZE;
+
+	if (nla_put_u8(phydev->skb, ETHTOOL_A_CABLE_AMPLITUDE_PAIR, pair))
+		goto err;
+	if (nla_put_u16(phydev->skb, ETHTOOL_A_CABLE_AMPLITUDE_mV, mV))
+		goto err;
+
+	nla_nest_end(phydev->skb, nest);
+	return 0;
+
+err:
+	nla_nest_cancel(phydev->skb, nest);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ethnl_cable_test_amplitude);
+
+int ethnl_cable_test_pulse(struct phy_device *phydev, u16 mV)
+{
+	struct nlattr *nest;
+	int ret = -EMSGSIZE;
+
+	nest = nla_nest_start(phydev->skb, ETHTOOL_A_CABLE_TDR_NEST_PULSE);
+	if (!nest)
+		return -EMSGSIZE;
+
+	if (nla_put_u16(phydev->skb, ETHTOOL_A_CABLE_PULSE_mV, mV))
+		goto err;
+
+	nla_nest_end(phydev->skb, nest);
+	return 0;
+
+err:
+	nla_nest_cancel(phydev->skb, nest);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ethnl_cable_test_pulse);
+
+int ethnl_cable_test_step(struct phy_device *phydev, u32 first, u32 last,
+			  u32 step)
+{
+	struct nlattr *nest;
+	int ret = -EMSGSIZE;
+
+	nest = nla_nest_start(phydev->skb, ETHTOOL_A_CABLE_TDR_NEST_STEP);
+	if (!nest)
+		return -EMSGSIZE;
+
+	if (nla_put_u32(phydev->skb, ETHTOOL_A_CABLE_STEP_FIRST_DISTANCE,
+			first))
+		goto err;
+
+	if (nla_put_u32(phydev->skb, ETHTOOL_A_CABLE_STEP_LAST_DISTANCE, last))
+		goto err;
+
+	if (nla_put_u32(phydev->skb, ETHTOOL_A_CABLE_STEP_STEP_DISTANCE, step))
+		goto err;
+
+	nla_nest_end(phydev->skb, nest);
+	return 0;
+
+err:
+	nla_nest_cancel(phydev->skb, nest);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ethnl_cable_test_step);

net/ethtool/netlink.c

@@ -844,6 +844,11 @@ static const struct genl_ops ethtool_genl_ops[] = {
 		.flags	= GENL_UNS_ADMIN_PERM,
 		.doit	= ethnl_act_cable_test,
 	},
+	{
+		.cmd	= ETHTOOL_MSG_CABLE_TEST_TDR_ACT,
+		.flags	= GENL_UNS_ADMIN_PERM,
+		.doit	= ethnl_act_cable_test_tdr,
+	},
 };
 
 static const struct genl_multicast_group ethtool_nl_mcgrps[] = {

net/ethtool/netlink.h

@@ -360,5 +360,6 @@ int ethnl_set_coalesce(struct sk_buff *skb, struct genl_info *info);
 int ethnl_set_pause(struct sk_buff *skb, struct genl_info *info);
 int ethnl_set_eee(struct sk_buff *skb, struct genl_info *info);
 int ethnl_act_cable_test(struct sk_buff *skb, struct genl_info *info);
+int ethnl_act_cable_test_tdr(struct sk_buff *skb, struct genl_info *info);
 
 #endif /* _NET_ETHTOOL_NETLINK_H */