Commit 95070373 authored by Finn Thain's avatar Finn Thain Committed by Martin K. Petersen

scsi: ncr5380: Clean up dead code and redundant macro usage

Remove dead code inside #if 0 conditionals.

Remove the #ifdef __KERNEL__ test, since NCR5380.h has no definitions
that relate to userspace code.

Remove two redundant macro definitions which were overlooked in
commit e9db3198 ("sun3_scsi: Adopt NCR5380.c core driver").
Signed-off-by: default avatarFinn Thain <fthain@telegraphics.com.au>
Tested-by: default avatarOndrej Zary <linux@rainbow-software.org>
Tested-by: default avatarMichael Schmitz <schmitzmic@gmail.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent 09028461
......@@ -166,11 +166,7 @@
#define CSR_SCSI_BUF_RDY 0x02 /* ro SCSI buffer read */
#define CSR_GATED_53C80_IRQ 0x01 /* ro Last block xferred */
#if 0
#define CSR_BASE CSR_SCSI_BUFF_INTR | CSR_53C80_INTR
#else
#define CSR_BASE CSR_53C80_INTR
#endif
/* Note : PHASE_* macros are based on the values of the STATUS register */
#define PHASE_MASK (SR_MSG | SR_CD | SR_IO)
......@@ -229,8 +225,6 @@ struct NCR5380_hostdata {
char info[168]; /* Host banner message */
};
#ifdef __KERNEL__
struct NCR5380_cmd {
struct list_head list;
};
......@@ -323,5 +317,4 @@ static inline int NCR5380_dma_residual_none(struct NCR5380_hostdata *hostdata)
return 0;
}
#endif /* __KERNEL__ */
#endif /* NCR5380_H */
......@@ -178,37 +178,6 @@ static int scsi_dma_is_ignored_buserr(unsigned char dma_stat)
}
#if 0
/* Dead code... wasn't called anyway :-) and causes some trouble, because at
* end-of-DMA, both SCSI ints are triggered simultaneously, so the NCR int has
* to clear the DMA int pending bit before it allows other level 6 interrupts.
*/
static void scsi_dma_buserr(int irq, void *dummy)
{
unsigned char dma_stat = tt_scsi_dma.dma_ctrl;
/* Don't do anything if a NCR interrupt is pending. Probably it's just
* masked... */
if (atari_irq_pending(IRQ_TT_MFP_SCSI))
return;
printk("Bad SCSI DMA interrupt! dma_addr=0x%08lx dma_stat=%02x dma_cnt=%08lx\n",
SCSI_DMA_READ_P(dma_addr), dma_stat, SCSI_DMA_READ_P(dma_cnt));
if (dma_stat & 0x80) {
if (!scsi_dma_is_ignored_buserr(dma_stat))
printk("SCSI DMA bus error -- bad DMA programming!\n");
} else {
/* Under normal circumstances we never should get to this point,
* since both interrupts are triggered simultaneously and the 5380
* int has higher priority. When this irq is handled, that DMA
* interrupt is cleared. So a warning message is printed here.
*/
printk("SCSI DMA intr ?? -- this shouldn't happen!\n");
}
}
#endif
static irqreturn_t scsi_tt_intr(int irq, void *dev)
{
struct Scsi_Host *instance = dev;
......
......@@ -56,9 +56,6 @@
#define NCR5380_dma_send_setup sun3scsi_dma_count
#define NCR5380_dma_residual sun3scsi_dma_residual
#define NCR5380_acquire_dma_irq(instance) (1)
#define NCR5380_release_dma_irq(instance)
#include "NCR5380.h"
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment