spi: atmel: init FIFOs before spi enable

The datasheet recommends initializing FIFOs before
SPI enable. If we do not do it like this, there may be
a strange behavior. We noticed that DMA does not work properly
with FIFOs if we do not clear them beforehand or enable them
before SPIEN.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

drivers/spi/spi-atmel.c

@@ -1512,6 +1512,11 @@ static void atmel_spi_init(struct atmel_spi *as)
 {
 	spi_writel(as, CR, SPI_BIT(SWRST));
 	spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
+
+	/* It is recommended to enable FIFOs first thing after reset */
+	if (as->fifo_size)
+		spi_writel(as, CR, SPI_BIT(FIFOEN));
+
 	if (as->caps.has_wdrbt) {
 		spi_writel(as, MR, SPI_BIT(WDRBT) | SPI_BIT(MODFDIS)
 				| SPI_BIT(MSTR));
@@ -1522,9 +1527,6 @@ static void atmel_spi_init(struct atmel_spi *as)
 	if (as->use_pdc)
 		spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
 	spi_writel(as, CR, SPI_BIT(SPIEN));
-
-	if (as->fifo_size)
-		spi_writel(as, CR, SPI_BIT(FIFOEN));
 }
 
 static int atmel_spi_probe(struct platform_device *pdev)