Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid

Pull HID fixes from Jiri Kosina:

 - device descriptor length validation fix to hid-cypress driver from
   Greg

 - introduction of a short delay into i2c-hid, which is not really
   mandated by the spec, but fixes Asus Touchpads

 - Petzl USB connectable flashlight quirk from myself

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: i2c-hid: Add sleep between POWER ON and RESET
  HID: hid-cypress: validate length of report
  HID: ignore Petzl USB headlamp

drivers/hid/hid-core.c

@@ -2496,6 +2496,7 @@ static const struct hid_device_id hid_ignore_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0002) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0003) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0004) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_PETZL, USB_DEVICE_ID_PETZL_HEADLAMP) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PHILIPS, USB_DEVICE_ID_PHILIPS_IEEE802154_DONGLE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_POWERCOM, USB_DEVICE_ID_POWERCOM_UPS) },
 #if IS_ENABLED(CONFIG_MOUSE_SYNAPTICS_USB)

drivers/hid/hid-cypress.c

@@ -39,6 +39,9 @@ static __u8 *cp_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 	if (!(quirks & CP_RDESC_SWAPPED_MIN_MAX))
 		return rdesc;
 
+	if (*rsize < 4)
+		return rdesc;
+
 	for (i = 0; i < *rsize - 4; i++)
 		if (rdesc[i] == 0x29 && rdesc[i + 2] == 0x19) {
 			rdesc[i] = 0x19;

drivers/hid/hid-ids.h

@@ -816,6 +816,9 @@
 #define USB_VENDOR_ID_PETALYNX		0x18b1
 #define USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE	0x0037
 
+#define USB_VENDOR_ID_PETZL		0x2122
+#define USB_DEVICE_ID_PETZL_HEADLAMP	0x1234
+
 #define USB_VENDOR_ID_PHILIPS		0x0471
 #define USB_DEVICE_ID_PHILIPS_IEEE802154_DONGLE 0x0617
 

drivers/hid/i2c-hid/i2c-hid.c

@@ -426,6 +426,15 @@ static int i2c_hid_hwreset(struct i2c_client *client)
 	if (ret)
 		goto out_unlock;
 
+	/*
+	 * The HID over I2C specification states that if a DEVICE needs time
+	 * after the PWR_ON request, it should utilise CLOCK stretching.
+	 * However, it has been observered that the Windows driver provides a
+	 * 1ms sleep between the PWR_ON and RESET requests and that some devices
+	 * rely on this.
+	 */
+	usleep_range(1000, 5000);
+
 	i2c_hid_dbg(ihid, "resetting...\n");
 
 	ret = i2c_hid_command(client, &hid_reset_cmd, NULL, 0);