ARM: restart: mv78xx0: use new restart hook

Hook these platforms restart code into the new restart hook rather than
using arch_reset().
Acked-by: Nicolas pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-mv78xx0/buffalo-wxl-setup.c

@@ -151,4 +151,5 @@ MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL")
 	.init_early	= mv78xx0_init_early,
 	.init_irq	= mv78xx0_init_irq,
 	.timer		= &mv78xx0_timer,
+	.restart	= mv78xx0_restart,
 MACHINE_END

arch/arm/mach-mv78xx0/common.c

@@ -401,3 +401,19 @@ void __init mv78xx0_init(void)
 	feroceon_l2_init(is_l2_writethrough());
 #endif
 }
+
+void mv78xx0_restart(char mode, const char *cmd)
+{
+	/*
+	 * Enable soft reset to assert RSTOUTn.
+	 */
+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+	/*
+	 * Assert soft reset.
+	 */
+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+	while (1)
+		;
+}

arch/arm/mach-mv78xx0/common.h

@@ -46,6 +46,7 @@ void mv78xx0_uart1_init(void);
 void mv78xx0_uart2_init(void);
 void mv78xx0_uart3_init(void);
 void mv78xx0_i2c_init(void);
+void mv78xx0_restart(char, const char *);
 
 extern struct sys_timer mv78xx0_timer;
 

arch/arm/mach-mv78xx0/db78x00-bp-setup.c

@@ -99,4 +99,5 @@ MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board")
 	.init_early	= mv78xx0_init_early,
 	.init_irq	= mv78xx0_init_irq,
 	.timer		= &mv78xx0_timer,
+	.restart	= mv78xx0_restart,
 MACHINE_END

arch/arm/mach-mv78xx0/include/mach/system.h

@@ -9,8 +9,6 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <mach/bridge-regs.h>
-
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
@@ -18,18 +16,6 @@ static inline void arch_idle(void)
 
 static inline void arch_reset(char mode, const char *cmd)
 {
-	/*
-	 * Enable soft reset to assert RSTOUTn.
-	 */
-	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
-	/*
-	 * Assert soft reset.
-	 */
-	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
-	while (1)
-		;
 }
 
 

arch/arm/mach-mv78xx0/rd78x00-masa-setup.c

@@ -84,4 +84,5 @@ MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board")
 	.init_early	= mv78xx0_init_early,
 	.init_irq	= mv78xx0_init_irq,
 	.timer		= &mv78xx0_timer,
+	.restart	= mv78xx0_restart,
 MACHINE_END