mfd: Add WM8352 support

The WM8352 is a variant of the WM8350. Aside from the register defaults
there are no software visible differences to the WM8350.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>

drivers/mfd/Kconfig

@@ -143,6 +143,22 @@ config MFD_WM8350_CONFIG_MODE_3
 	bool
 	depends on MFD_WM8350
 
+config MFD_WM8352_CONFIG_MODE_0
+	bool
+	depends on MFD_WM8350
+
+config MFD_WM8352_CONFIG_MODE_1
+	bool
+	depends on MFD_WM8350
+
+config MFD_WM8352_CONFIG_MODE_2
+	bool
+	depends on MFD_WM8350
+
+config MFD_WM8352_CONFIG_MODE_3
+	bool
+	depends on MFD_WM8350
+
 config MFD_WM8350_I2C
 	tristate "Support Wolfson Microelectronics WM8350 with I2C"
 	select MFD_WM8350

drivers/mfd/wm8350-core.c

@@ -1133,35 +1133,75 @@ EXPORT_SYMBOL_GPL(wm8350_read_auxadc);
 /*
  * Cache is always host endian.
  */
-static int wm8350_create_cache(struct wm8350 *wm8350, int mode)
+static int wm8350_create_cache(struct wm8350 *wm8350, int type, int mode)
 {
 	int i, ret = 0;
 	u16 value;
 	const u16 *reg_map;
 
-	switch (mode) {
-#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_0
+	switch (type) {
 	case 0:
-		reg_map = wm8350_mode0_defaults;
-		break;
+		switch (mode) {
+#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_0
+		case 0:
+			reg_map = wm8350_mode0_defaults;
+			break;
 #endif
 #ifdef CONFIG_MFD_WM8350_CONFIG_MODE_1
-	case 1:
-		reg_map = wm8350_mode1_defaults;
-		break;
+		case 1:
+			reg_map = wm8350_mode1_defaults;
+			break;
 #endif
 #ifdef CONFIG_MFD_WM8350_CONFIG_MODE_2
-	case 2:
-		reg_map = wm8350_mode2_defaults;
-		break;
+		case 2:
+			reg_map = wm8350_mode2_defaults;
+			break;
 #endif
 #ifdef CONFIG_MFD_WM8350_CONFIG_MODE_3
-	case 3:
-		reg_map = wm8350_mode3_defaults;
-		break;
+		case 3:
+			reg_map = wm8350_mode3_defaults;
+			break;
 #endif
+		default:
+			dev_err(wm8350->dev,
+				"WM8350 configuration mode %d not supported\n",
+				mode);
+			return -EINVAL;
+		}
+
+	case 2:
+		switch (mode) {
+#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_0
+		case 0:
+			reg_map = wm8352_mode0_defaults;
+			break;
+#endif
+#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_1
+		case 1:
+			reg_map = wm8352_mode1_defaults;
+			break;
+#endif
+#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_2
+		case 2:
+			reg_map = wm8352_mode2_defaults;
+			break;
+#endif
+#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_3
+		case 3:
+			reg_map = wm8352_mode3_defaults;
+			break;
+#endif
+		default:
+			dev_err(wm8350->dev,
+				"WM8352 configuration mode %d not supported\n",
+				mode);
+			return -EINVAL;
+		}
+		break;
+
 	default:
-		dev_err(wm8350->dev, "Configuration mode %d not supported\n",
+		dev_err(wm8350->dev,
+			"WM835x configuration mode %d not supported\n",
 			mode);
 		return -EINVAL;
 	}
@@ -1284,13 +1324,27 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
 		}
 		break;
 
+	case 2:
+		switch (chip_rev) {
+		case 0:
+			dev_info(wm8350->dev, "WM8352 Rev A\n");
+			wm8350->power.rev_g_coeff = 1;
+			break;
+
+		default:
+			dev_err(wm8350->dev, "Unknown WM8352 CHIP_REV\n");
+			ret = -ENODEV;
+			goto err;
+		}
+		break;
+
 	default:
 		dev_err(wm8350->dev, "Unknown MASK_REV\n");
 		ret = -ENODEV;
 		goto err;
 	}
 
-	ret = wm8350_create_cache(wm8350, mode);
+	ret = wm8350_create_cache(wm8350, mask_rev, mode);
 	if (ret < 0) {
 		dev_err(wm8350->dev, "Failed to create register cache\n");
 		return ret;

drivers/mfd/wm8350-i2c.c

@@ -97,6 +97,7 @@ static int wm8350_i2c_remove(struct i2c_client *i2c)
 
 static const struct i2c_device_id wm8350_i2c_id[] = {
        { "wm8350", 0 },
+       { "wm8352", 0 },
        { }
 };
 MODULE_DEVICE_TABLE(i2c, wm8350_i2c_id);

include/linux/mfd/wm8350/core.h

@@ -589,6 +589,10 @@ extern const u16 wm8350_mode0_defaults[];
 extern const u16 wm8350_mode1_defaults[];
 extern const u16 wm8350_mode2_defaults[];
 extern const u16 wm8350_mode3_defaults[];
+extern const u16 wm8352_mode0_defaults[];
+extern const u16 wm8352_mode1_defaults[];
+extern const u16 wm8352_mode2_defaults[];
+extern const u16 wm8352_mode3_defaults[];
 
 struct wm8350;