iwlagn: fix the bit mask of a FH register in stop Tx DMA flow

When we stop the Tx DMA channels, we poll bits 16:31 in
FH_TSSR_RX_STATUS_REG. From 4965 and up, only the bits 16:26 are legal.
Bits 27:31 are not used and are always unset.
Polling them will lead to fail on timeout but since the timeout is quite
small, the stall was not felt.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

drivers/net/wireless/iwlwifi/iwl-agn-tx.c

@@ -950,9 +950,12 @@ void iwlagn_txq_ctx_stop(struct iwl_priv *priv)
 	/* Stop each Tx DMA channel, and wait for it to be idle */
 	for (ch = 0; ch < priv->hw_params.dma_chnl_num; ch++) {
 		iwl_write_direct32(priv, FH_TCSR_CHNL_TX_CONFIG_REG(ch), 0x0);
-		iwl_poll_direct_bit(priv, FH_TSSR_TX_STATUS_REG,
+		if (iwl_poll_direct_bit(priv, FH_TSSR_TX_STATUS_REG,
 				    FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(ch),
-				    1000);
+				    1000))
+			IWL_ERR(priv, "Failing on timeout while stopping"
+			    " DMA channel %d [0x%08x]", ch,
+			    iwl_read_direct32(priv, FH_TSSR_TX_STATUS_REG));
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);
 }

drivers/net/wireless/iwlwifi/iwl-fh.h

@@ -398,12 +398,7 @@
  */
 #define FH_TSSR_TX_ERROR_REG		(FH_TSSR_LOWER_BOUND + 0x018)
 
-#define FH_TSSR_TX_STATUS_REG_BIT_BUFS_EMPTY(_chnl) ((1 << (_chnl)) << 24)
-#define FH_TSSR_TX_STATUS_REG_BIT_NO_PEND_REQ(_chnl) ((1 << (_chnl)) << 16)
-
-#define FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(_chnl) \
-	(FH_TSSR_TX_STATUS_REG_BIT_BUFS_EMPTY(_chnl) | \
-	FH_TSSR_TX_STATUS_REG_BIT_NO_PEND_REQ(_chnl))
+#define FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(_chnl) ((1 << (_chnl)) << 16)
 
 /* Tx service channels */
 #define FH_SRVC_CHNL		(9)