Commit 9750a3ad authored by Richard Cochran's avatar Richard Cochran Committed by David S. Miller

cpsw: support both silicon versions

This patch fixes the cpsw driver to operate correctly with both the
dm814x and the am335x versions of the switch hardware.
Signed-off-by: default avatarRichard Cochran <richardcochran@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent e90cfac6
...@@ -59,14 +59,14 @@ Examples: ...@@ -59,14 +59,14 @@ Examples:
mac_control = <0x20>; mac_control = <0x20>;
slaves = <2>; slaves = <2>;
cpsw_emac0: slave@0 { cpsw_emac0: slave@0 {
slave_reg_ofs = <0x208>; slave_reg_ofs = <0x200>;
sliver_reg_ofs = <0xd80>; sliver_reg_ofs = <0xd80>;
phy_id = "davinci_mdio.16:00"; phy_id = "davinci_mdio.16:00";
/* Filled in by U-Boot */ /* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ]; mac-address = [ 00 00 00 00 00 00 ];
}; };
cpsw_emac1: slave@1 { cpsw_emac1: slave@1 {
slave_reg_ofs = <0x308>; slave_reg_ofs = <0x300>;
sliver_reg_ofs = <0xdc0>; sliver_reg_ofs = <0xdc0>;
phy_id = "davinci_mdio.16:01"; phy_id = "davinci_mdio.16:01";
/* Filled in by U-Boot */ /* Filled in by U-Boot */
...@@ -93,14 +93,14 @@ Examples: ...@@ -93,14 +93,14 @@ Examples:
mac_control = <0x20>; mac_control = <0x20>;
slaves = <2>; slaves = <2>;
cpsw_emac0: slave@0 { cpsw_emac0: slave@0 {
slave_reg_ofs = <0x208>; slave_reg_ofs = <0x200>;
sliver_reg_ofs = <0xd80>; sliver_reg_ofs = <0xd80>;
phy_id = "davinci_mdio.16:00"; phy_id = "davinci_mdio.16:00";
/* Filled in by U-Boot */ /* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ]; mac-address = [ 00 00 00 00 00 00 ];
}; };
cpsw_emac1: slave@1 { cpsw_emac1: slave@1 {
slave_reg_ofs = <0x308>; slave_reg_ofs = <0x300>;
sliver_reg_ofs = <0xdc0>; sliver_reg_ofs = <0xdc0>;
phy_id = "davinci_mdio.16:01"; phy_id = "davinci_mdio.16:01";
/* Filled in by U-Boot */ /* Filled in by U-Boot */
......
...@@ -160,18 +160,74 @@ struct cpsw_ss_regs { ...@@ -160,18 +160,74 @@ struct cpsw_ss_regs {
u32 dlr_ltype; u32 dlr_ltype;
}; };
struct cpsw_slave_regs { /* CPSW_PORT_V1 */
u32 max_blks; #define CPSW1_MAX_BLKS 0x00 /* Maximum FIFO Blocks */
u32 blk_cnt; #define CPSW1_BLK_CNT 0x04 /* FIFO Block Usage Count (Read Only) */
u32 flow_thresh; #define CPSW1_TX_IN_CTL 0x08 /* Transmit FIFO Control */
u32 port_vlan; #define CPSW1_PORT_VLAN 0x0c /* VLAN Register */
u32 tx_pri_map; #define CPSW1_TX_PRI_MAP 0x10 /* Tx Header Priority to Switch Pri Mapping */
u32 ts_ctl; #define CPSW1_TS_CTL 0x14 /* Time Sync Control */
u32 ts_seq_ltype; #define CPSW1_TS_SEQ_LTYPE 0x18 /* Time Sync Sequence ID Offset and Msg Type */
u32 ts_vlan; #define CPSW1_TS_VLAN 0x1c /* Time Sync VLAN1 and VLAN2 */
u32 sa_lo;
u32 sa_hi; /* CPSW_PORT_V2 */
}; #define CPSW2_CONTROL 0x00 /* Control Register */
#define CPSW2_MAX_BLKS 0x08 /* Maximum FIFO Blocks */
#define CPSW2_BLK_CNT 0x0c /* FIFO Block Usage Count (Read Only) */
#define CPSW2_TX_IN_CTL 0x10 /* Transmit FIFO Control */
#define CPSW2_PORT_VLAN 0x14 /* VLAN Register */
#define CPSW2_TX_PRI_MAP 0x18 /* Tx Header Priority to Switch Pri Mapping */
#define CPSW2_TS_SEQ_MTYPE 0x1c /* Time Sync Sequence ID Offset and Msg Type */
/* CPSW_PORT_V1 and V2 */
#define SA_LO 0x20 /* CPGMAC_SL Source Address Low */
#define SA_HI 0x24 /* CPGMAC_SL Source Address High */
#define SEND_PERCENT 0x28 /* Transmit Queue Send Percentages */
/* CPSW_PORT_V2 only */
#define RX_DSCP_PRI_MAP0 0x30 /* Rx DSCP Priority to Rx Packet Mapping */
#define RX_DSCP_PRI_MAP1 0x34 /* Rx DSCP Priority to Rx Packet Mapping */
#define RX_DSCP_PRI_MAP2 0x38 /* Rx DSCP Priority to Rx Packet Mapping */
#define RX_DSCP_PRI_MAP3 0x3c /* Rx DSCP Priority to Rx Packet Mapping */
#define RX_DSCP_PRI_MAP4 0x40 /* Rx DSCP Priority to Rx Packet Mapping */
#define RX_DSCP_PRI_MAP5 0x44 /* Rx DSCP Priority to Rx Packet Mapping */
#define RX_DSCP_PRI_MAP6 0x48 /* Rx DSCP Priority to Rx Packet Mapping */
#define RX_DSCP_PRI_MAP7 0x4c /* Rx DSCP Priority to Rx Packet Mapping */
/* Bit definitions for the CPSW2_CONTROL register */
#define PASS_PRI_TAGGED (1<<24) /* Pass Priority Tagged */
#define VLAN_LTYPE2_EN (1<<21) /* VLAN LTYPE 2 enable */
#define VLAN_LTYPE1_EN (1<<20) /* VLAN LTYPE 1 enable */
#define DSCP_PRI_EN (1<<16) /* DSCP Priority Enable */
#define TS_320 (1<<14) /* Time Sync Dest Port 320 enable */
#define TS_319 (1<<13) /* Time Sync Dest Port 319 enable */
#define TS_132 (1<<12) /* Time Sync Dest IP Addr 132 enable */
#define TS_131 (1<<11) /* Time Sync Dest IP Addr 131 enable */
#define TS_130 (1<<10) /* Time Sync Dest IP Addr 130 enable */
#define TS_129 (1<<9) /* Time Sync Dest IP Addr 129 enable */
#define TS_BIT8 (1<<8) /* ts_ttl_nonzero? */
#define TS_ANNEX_D_EN (1<<4) /* Time Sync Annex D enable */
#define TS_LTYPE2_EN (1<<3) /* Time Sync LTYPE 2 enable */
#define TS_LTYPE1_EN (1<<2) /* Time Sync LTYPE 1 enable */
#define TS_TX_EN (1<<1) /* Time Sync Transmit Enable */
#define TS_RX_EN (1<<0) /* Time Sync Receive Enable */
#define CTRL_TS_BITS \
(TS_320 | TS_319 | TS_132 | TS_131 | TS_130 | TS_129 | TS_BIT8 | \
TS_ANNEX_D_EN | TS_LTYPE1_EN)
#define CTRL_ALL_TS_MASK (CTRL_TS_BITS | TS_TX_EN | TS_RX_EN)
#define CTRL_TX_TS_BITS (CTRL_TS_BITS | TS_TX_EN)
#define CTRL_RX_TS_BITS (CTRL_TS_BITS | TS_RX_EN)
/* Bit definitions for the CPSW2_TS_SEQ_MTYPE register */
#define TS_SEQ_ID_OFFSET_SHIFT (16) /* Time Sync Sequence ID Offset */
#define TS_SEQ_ID_OFFSET_MASK (0x3f)
#define TS_MSG_TYPE_EN_SHIFT (0) /* Time Sync Message Type Enable */
#define TS_MSG_TYPE_EN_MASK (0xffff)
/* The PTP event messages - Sync, Delay_Req, Pdelay_Req, and Pdelay_Resp. */
#define EVENT_MSG_BITS ((1<<0) | (1<<1) | (1<<2) | (1<<3))
struct cpsw_host_regs { struct cpsw_host_regs {
u32 max_blks; u32 max_blks;
...@@ -197,7 +253,7 @@ struct cpsw_sliver_regs { ...@@ -197,7 +253,7 @@ struct cpsw_sliver_regs {
}; };
struct cpsw_slave { struct cpsw_slave {
struct cpsw_slave_regs __iomem *regs; void __iomem *regs;
struct cpsw_sliver_regs __iomem *sliver; struct cpsw_sliver_regs __iomem *sliver;
int slave_num; int slave_num;
u32 mac_control; u32 mac_control;
...@@ -205,6 +261,16 @@ struct cpsw_slave { ...@@ -205,6 +261,16 @@ struct cpsw_slave {
struct phy_device *phy; struct phy_device *phy;
}; };
static inline u32 slave_read(struct cpsw_slave *slave, u32 offset)
{
return __raw_readl(slave->regs + offset);
}
static inline void slave_write(struct cpsw_slave *slave, u32 val, u32 offset)
{
__raw_writel(val, slave->regs + offset);
}
struct cpsw_priv { struct cpsw_priv {
spinlock_t lock; spinlock_t lock;
struct platform_device *pdev; struct platform_device *pdev;
...@@ -396,8 +462,8 @@ static inline void soft_reset(const char *module, void __iomem *reg) ...@@ -396,8 +462,8 @@ static inline void soft_reset(const char *module, void __iomem *reg)
static void cpsw_set_slave_mac(struct cpsw_slave *slave, static void cpsw_set_slave_mac(struct cpsw_slave *slave,
struct cpsw_priv *priv) struct cpsw_priv *priv)
{ {
__raw_writel(mac_hi(priv->mac_addr), &slave->regs->sa_hi); slave_write(slave, mac_hi(priv->mac_addr), SA_HI);
__raw_writel(mac_lo(priv->mac_addr), &slave->regs->sa_lo); slave_write(slave, mac_lo(priv->mac_addr), SA_LO);
} }
static void _cpsw_adjust_link(struct cpsw_slave *slave, static void _cpsw_adjust_link(struct cpsw_slave *slave,
...@@ -483,7 +549,15 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv) ...@@ -483,7 +549,15 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv)
/* setup priority mapping */ /* setup priority mapping */
__raw_writel(RX_PRIORITY_MAPPING, &slave->sliver->rx_pri_map); __raw_writel(RX_PRIORITY_MAPPING, &slave->sliver->rx_pri_map);
__raw_writel(TX_PRIORITY_MAPPING, &slave->regs->tx_pri_map);
switch (priv->version) {
case CPSW_VERSION_1:
slave_write(slave, TX_PRIORITY_MAPPING, CPSW1_TX_PRI_MAP);
break;
case CPSW_VERSION_2:
slave_write(slave, TX_PRIORITY_MAPPING, CPSW2_TX_PRI_MAP);
break;
}
/* setup max packet size, and mac address */ /* setup max packet size, and mac address */
__raw_writel(priv->rx_packet_max, &slave->sliver->rx_maxlen); __raw_writel(priv->rx_packet_max, &slave->sliver->rx_maxlen);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment