Commit 978084b1 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

[media] doc-rst: document LIRC_SET_SEND_DUTY_CYCLE

Add a separate page for this ioctl.
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
parent 6d9f4d79
.. -*- coding: utf-8; mode: rst -*-
.. _lirc_set_send_duty_cycle:
******************************
ioctl LIRC_SET_SEND_DUTY_CYCLE
******************************
Name
====
LIRC_SET_SEND_DUTY_CYCLE - Set the duty cycle of the carrier signal for
IR transmit.
Synopsis
========
.. cpp:function:: int ioctl( int fd, int request, __u32 *duty_cycle)
Arguments
=========
``fd``
File descriptor returned by open().
``request``
LIRC_SET_SEND_DUTY_CYCLE
``duty_cycle``
Duty cicle, describing the pulse width in percent (from 1 to 99) of
the total cycle. Values 0 and 100 are reserved.
Description
===========
Get/set the duty cycle of the carrier signal for IR transmit.
Currently, no special meaning is defined for 0 or 100, but this
could be used to switch off carrier generation in the future, so
these values should be reserved.
Return Value
============
On success 0 is returned, on error -1 and the ``errno`` variable is set
appropriately. The generic error codes are described at the
:ref:`Generic Error Codes <gen-errors>` chapter.
...@@ -16,4 +16,5 @@ LIRC Device Interface ...@@ -16,4 +16,5 @@ LIRC Device Interface
lirc-get-send-mode lirc-get-send-mode
lirc-get-rec-mode lirc-get-rec-mode
lirc-get-rec-resolution lirc-get-rec-resolution
lirc-set-send-duty-cycle
lirc_ioctl lirc_ioctl
...@@ -49,15 +49,6 @@ device can rely on working with the default settings initially. ...@@ -49,15 +49,6 @@ device can rely on working with the default settings initially.
I/O control requests I/O control requests
==================== ====================
.. _LIRC_SET_SEND_DUTY_CYCLE:
``LIRC_SET_SEND_DUTY_CYCLE``
Set the duty cycle (from 0 to 100) of the carrier signal.
Currently, no special meaning is defined for 0 or 100, but this
could be used to switch off carrier generation in the future, so
these values should be reserved.
.. _LIRC_GET_MIN_TIMEOUT: .. _LIRC_GET_MIN_TIMEOUT:
.. _LIRC_GET_MAX_TIMEOUT: .. _LIRC_GET_MAX_TIMEOUT:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment