Commit 97933d6c authored by Tarun Kanti DebBarma's avatar Tarun Kanti DebBarma Committed by Tony Lindgren

ARM: OMAP1: dmtimer: conversion to platform devices

Convert OMAP1 dmtimers into a platform devices and then registers with
device model framework so that it can be bound to corresponding driver.
Signed-off-by: default avatarThara Gopinath <thara@ti.com>
Signed-off-by: default avatarTarun Kanti DebBarma <tarun.kanti@ti.com>
Reviewed-by: default avatarSantosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: default avatarCousson, Benoit <b-cousson@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 318c3e15
......@@ -4,7 +4,7 @@
# Common support
obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o
obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
......
/**
* OMAP1 Dual-Mode Timers - platform device registration
*
* Contains first level initialization routines which internally
* generates timer device information and registers with linux
* device model. It also has low level function to chnage the timer
* input clock source.
*
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
* Tarun Kanti DebBarma <tarun.kanti@ti.com>
* Thara Gopinath <thara@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <mach/irqs.h>
#include <plat/dmtimer.h>
#define OMAP1610_GPTIMER1_BASE 0xfffb1400
#define OMAP1610_GPTIMER2_BASE 0xfffb1c00
#define OMAP1610_GPTIMER3_BASE 0xfffb2400
#define OMAP1610_GPTIMER4_BASE 0xfffb2c00
#define OMAP1610_GPTIMER5_BASE 0xfffb3400
#define OMAP1610_GPTIMER6_BASE 0xfffb3c00
#define OMAP1610_GPTIMER7_BASE 0xfffb7400
#define OMAP1610_GPTIMER8_BASE 0xfffbd400
#define OMAP1_DM_TIMER_COUNT 8
static int omap1_dm_timer_set_src(struct platform_device *pdev,
int source)
{
int n = (pdev->id - 1) << 1;
u32 l;
l = __raw_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
l |= source << n;
__raw_writel(l, MOD_CONF_CTRL_1);
return 0;
}
int __init omap1_dm_timer_init(void)
{
int i;
int ret;
struct dmtimer_platform_data *pdata;
struct platform_device *pdev;
if (!cpu_is_omap16xx())
return 0;
for (i = 1; i <= OMAP1_DM_TIMER_COUNT; i++) {
struct resource res[2];
u32 base, irq;
switch (i) {
case 1:
base = OMAP1610_GPTIMER1_BASE;
irq = INT_1610_GPTIMER1;
break;
case 2:
base = OMAP1610_GPTIMER2_BASE;
irq = INT_1610_GPTIMER2;
break;
case 3:
base = OMAP1610_GPTIMER3_BASE;
irq = INT_1610_GPTIMER3;
break;
case 4:
base = OMAP1610_GPTIMER4_BASE;
irq = INT_1610_GPTIMER4;
break;
case 5:
base = OMAP1610_GPTIMER5_BASE;
irq = INT_1610_GPTIMER5;
break;
case 6:
base = OMAP1610_GPTIMER6_BASE;
irq = INT_1610_GPTIMER6;
break;
case 7:
base = OMAP1610_GPTIMER7_BASE;
irq = INT_1610_GPTIMER7;
break;
case 8:
base = OMAP1610_GPTIMER8_BASE;
irq = INT_1610_GPTIMER8;
break;
default:
/*
* not supposed to reach here.
* this is to remove warning.
*/
return -EINVAL;
}
pdev = platform_device_alloc("omap_timer", i);
if (!pdev) {
pr_err("%s: Failed to device alloc for dmtimer%d\n",
__func__, i);
return -ENOMEM;
}
memset(res, 0, 2 * sizeof(struct resource));
res[0].start = base;
res[0].end = base + 0x46;
res[0].flags = IORESOURCE_MEM;
res[1].start = irq;
res[1].end = irq;
res[1].flags = IORESOURCE_IRQ;
ret = platform_device_add_resources(pdev, res,
ARRAY_SIZE(res));
if (ret) {
dev_err(&pdev->dev, "%s: Failed to add resources.\n",
__func__);
goto err_free_pdev;
}
pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
if (!pdata) {
dev_err(&pdev->dev, "%s: Failed to allocate pdata.\n",
__func__);
ret = -ENOMEM;
goto err_free_pdata;
}
pdata->set_timer_src = omap1_dm_timer_set_src;
pdata->needs_manual_reset = 1;
ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
if (ret) {
dev_err(&pdev->dev, "%s: Failed to add platform data.\n",
__func__);
goto err_free_pdata;
}
ret = platform_device_add(pdev);
if (ret) {
dev_err(&pdev->dev, "%s: Failed to add platform device.\n",
__func__);
goto err_free_pdata;
}
dev_dbg(&pdev->dev, " Registered.\n");
}
return 0;
err_free_pdata:
kfree(pdata);
err_free_pdev:
platform_device_unregister(pdev);
return ret;
}
arch_initcall(omap1_dm_timer_init);
......@@ -3,6 +3,12 @@
*
* OMAP Dual-Mode Timers
*
* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
* Tarun Kanti DebBarma <tarun.kanti@ti.com>
* Thara Gopinath <thara@ti.com>
*
* dmtimer adaptation to platform_driver.
*
* Copyright (C) 2005 Nokia Corporation
* OMAP2 support by Juha Yrjola
* API improvements and OMAP2 clock framework support by Timo Teras
......@@ -43,25 +49,6 @@
static int dm_timer_count;
#ifdef CONFIG_ARCH_OMAP1
static struct omap_dm_timer omap1_dm_timers[] = {
{ .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 },
{ .phys_base = 0xfffb1c00, .irq = INT_1610_GPTIMER2 },
{ .phys_base = 0xfffb2400, .irq = INT_1610_GPTIMER3 },
{ .phys_base = 0xfffb2c00, .irq = INT_1610_GPTIMER4 },
{ .phys_base = 0xfffb3400, .irq = INT_1610_GPTIMER5 },
{ .phys_base = 0xfffb3c00, .irq = INT_1610_GPTIMER6 },
{ .phys_base = 0xfffb7400, .irq = INT_1610_GPTIMER7 },
{ .phys_base = 0xfffbd400, .irq = INT_1610_GPTIMER8 },
};
static const int omap1_dm_timer_count = ARRAY_SIZE(omap1_dm_timers);
#else
#define omap1_dm_timers NULL
#define omap1_dm_timer_count 0
#endif /* CONFIG_ARCH_OMAP1 */
#ifdef CONFIG_ARCH_OMAP2
static struct omap_dm_timer omap2_dm_timers[] = {
{ .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 },
......@@ -410,35 +397,20 @@ void omap_dm_timer_stop(struct omap_dm_timer *timer)
}
EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
#ifdef CONFIG_ARCH_OMAP1
int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
{
int n = (timer - dm_timers) << 1;
u32 l;
l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
l |= source << n;
omap_writel(l, MOD_CONF_CTRL_1);
return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
#else
int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
{
if (source < 0 || source >= 3)
return -EINVAL;
#ifdef CONFIG_ARCH_OMAP2PLUS
return __omap_dm_timer_set_source(timer->fclk,
dm_source_clocks[source]);
#else
return 0;
#endif
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
#endif
void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
unsigned int load)
{
......@@ -582,16 +554,12 @@ static int __init omap_dm_timer_init(void)
struct omap_dm_timer *timer;
int i, map_size = SZ_8K; /* Module 4KB + L4 4KB except on omap1 */
if (!(cpu_is_omap16xx() || cpu_class_is_omap2()))
if (!cpu_class_is_omap2())
return -ENODEV;
spin_lock_init(&dm_timer_lock);
if (cpu_class_is_omap1()) {
dm_timers = omap1_dm_timers;
dm_timer_count = omap1_dm_timer_count;
map_size = SZ_2K;
} else if (cpu_is_omap24xx()) {
if (cpu_is_omap24xx()) {
dm_timers = omap2_dm_timers;
dm_timer_count = omap2_dm_timer_count;
dm_source_names = omap2_dm_source_names;
......
......@@ -35,6 +35,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#ifndef __ASM_ARCH_DMTIMER_H
#define __ASM_ARCH_DMTIMER_H
......@@ -62,6 +63,12 @@
struct omap_dm_timer;
struct clk;
struct dmtimer_platform_data {
int (*set_timer_src)(struct platform_device *pdev, int source);
int timer_ip_version;
u32 needs_manual_reset:1;
};
struct omap_dm_timer *omap_dm_timer_request(void);
struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
void omap_dm_timer_free(struct omap_dm_timer *timer);
......@@ -228,6 +235,7 @@ struct omap_dm_timer {
unsigned reserved:1;
unsigned enabled:1;
unsigned posted:1;
struct platform_device *pdev;
};
extern u32 sys_timer_reserved;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment