Commit 97991657 authored by Magnus Damm's avatar Magnus Damm Committed by Paul Mundt

ARM: mach-shmobile: sh7372 Core Standby Suspend-to-RAM

Add sh7372 Core Standby sleep mode support and tie it
in with the shared SH-Mobile ARM suspend code.

The Core Standby mode is the lightest sh7372-specific
sleep mode, cutting power to the ARM core excluding the
L2 cache. Any interrupt source can be used for wakeups.

The low level portion of this code is based on the
TI OMAP sleep code in sleep34xx.S, thanks to them.
Signed-off-by: default avatarMagnus Damm <damm@opensource.se>
Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
parent c3dada18
...@@ -32,6 +32,7 @@ obj-$(CONFIG_ARCH_SH73A0) += entry-gic.o ...@@ -32,6 +32,7 @@ obj-$(CONFIG_ARCH_SH73A0) += entry-gic.o
# PM objects # PM objects
obj-$(CONFIG_SUSPEND) += suspend.o obj-$(CONFIG_SUSPEND) += suspend.o
obj-$(CONFIG_ARCH_SH7372) += pm-sh7372.o sleep-sh7372.o
# Board objects # Board objects
obj-$(CONFIG_MACH_G3EVM) += board-g3evm.o obj-$(CONFIG_MACH_G3EVM) += board-g3evm.o
......
...@@ -1354,6 +1354,7 @@ static void __init ap4evb_init(void) ...@@ -1354,6 +1354,7 @@ static void __init ap4evb_init(void)
hdmi_init_pm_clock(); hdmi_init_pm_clock();
fsi_init_pm_clock(); fsi_init_pm_clock();
sh7372_pm_init();
} }
static void __init ap4evb_timer_init(void) static void __init ap4evb_timer_init(void)
......
...@@ -1230,6 +1230,7 @@ static void __init mackerel_init(void) ...@@ -1230,6 +1230,7 @@ static void __init mackerel_init(void)
platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices)); platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices));
hdmi_init_pm_clock(); hdmi_init_pm_clock();
sh7372_pm_init();
} }
static void __init mackerel_timer_init(void) static void __init mackerel_timer_init(void)
......
...@@ -31,6 +31,9 @@ extern void sh7372_add_early_devices(void); ...@@ -31,6 +31,9 @@ extern void sh7372_add_early_devices(void);
extern void sh7372_add_standard_devices(void); extern void sh7372_add_standard_devices(void);
extern void sh7372_clock_init(void); extern void sh7372_clock_init(void);
extern void sh7372_pinmux_init(void); extern void sh7372_pinmux_init(void);
extern void sh7372_pm_init(void);
extern void sh7372_cpu_suspend(void);
extern void sh7372_cpu_resume(void);
extern struct clk sh7372_extal1_clk; extern struct clk sh7372_extal1_clk;
extern struct clk sh7372_extal2_clk; extern struct clk sh7372_extal2_clk;
......
/*
* sh7372 Power management support
*
* Copyright (C) 2011 Magnus Damm
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/pm.h>
#include <linux/suspend.h>
#include <linux/module.h>
#include <linux/list.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/tlbflush.h>
#include <mach/common.h>
#define SMFRAM 0xe6a70000
#define SYSTBCR 0xe6150024
#define SBAR 0xe6180020
#define APARMBAREA 0xe6f10020
#ifdef CONFIG_SUSPEND
static void sh7372_enter_core_standby(void)
{
void __iomem *smfram = (void __iomem *)SMFRAM;
__raw_writel(0, APARMBAREA); /* translate 4k */
__raw_writel(__pa(sh7372_cpu_resume), SBAR); /* set reset vector */
__raw_writel(0x10, SYSTBCR); /* enable core standby */
__raw_writel(0, smfram + 0x3c); /* clear page table address */
sh7372_cpu_suspend();
cpu_init();
/* if page table address is non-NULL then we have been powered down */
if (__raw_readl(smfram + 0x3c)) {
__raw_writel(__raw_readl(smfram + 0x40),
__va(__raw_readl(smfram + 0x3c)));
flush_tlb_all();
set_cr(__raw_readl(smfram + 0x38));
}
__raw_writel(0, SYSTBCR); /* disable core standby */
__raw_writel(0, SBAR); /* disable reset vector translation */
}
static int sh7372_enter_suspend(suspend_state_t suspend_state)
{
sh7372_enter_core_standby();
return 0;
}
static void sh7372_suspend_init(void)
{
shmobile_suspend_ops.enter = sh7372_enter_suspend;
}
#else
static void sh7372_suspend_init(void) {}
#endif
#define DBGREG1 0xe6100020
#define DBGREG9 0xe6100040
void __init sh7372_pm_init(void)
{
/* enable DBG hardware block to kick SYSC */
__raw_writel(0x0000a500, DBGREG9);
__raw_writel(0x0000a501, DBGREG9);
__raw_writel(0x00000000, DBGREG1);
sh7372_suspend_init();
}
/*
* sh7372 lowlevel sleep code for "Core Standby Mode"
*
* Copyright (C) 2011 Magnus Damm
*
* In "Core Standby Mode" the ARM core is off, but L2 cache is still on
*
* Based on mach-omap2/sleep34xx.S
*
* (C) Copyright 2007 Texas Instruments
* Karthik Dasu <karthik-dp@ti.com>
*
* (C) Copyright 2004 Texas Instruments, <www.ti.com>
* Richard Woodruff <r-woodruff2@ti.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#define SMFRAM 0xe6a70000
.align
kernel_flush:
.word v7_flush_dcache_all
.align 3
ENTRY(sh7372_cpu_suspend)
stmfd sp!, {r0-r12, lr} @ save registers on stack
ldr r8, =SMFRAM
mov r4, sp @ Store sp
mrs r5, spsr @ Store spsr
mov r6, lr @ Store lr
stmia r8!, {r4-r6}
mrc p15, 0, r4, c1, c0, 2 @ Coprocessor access control register
mrc p15, 0, r5, c2, c0, 0 @ TTBR0
mrc p15, 0, r6, c2, c0, 1 @ TTBR1
mrc p15, 0, r7, c2, c0, 2 @ TTBCR
stmia r8!, {r4-r7}
mrc p15, 0, r4, c3, c0, 0 @ Domain access Control Register
mrc p15, 0, r5, c10, c2, 0 @ PRRR
mrc p15, 0, r6, c10, c2, 1 @ NMRR
stmia r8!,{r4-r6}
mrc p15, 0, r4, c13, c0, 1 @ Context ID
mrc p15, 0, r5, c13, c0, 2 @ User r/w thread and process ID
mrc p15, 0, r6, c12, c0, 0 @ Secure or NS vector base address
mrs r7, cpsr @ Store current cpsr
stmia r8!, {r4-r7}
mrc p15, 0, r4, c1, c0, 0 @ save control register
stmia r8!, {r4}
/*
* jump out to kernel flush routine
* - reuse that code is better
* - it executes in a cached space so is faster than refetch per-block
* - should be faster and will change with kernel
* - 'might' have to copy address, load and jump to it
* Flush all data from the L1 data cache before disabling
* SCTLR.C bit.
*/
ldr r1, kernel_flush
mov lr, pc
bx r1
/*
* Clear the SCTLR.C bit to prevent further data cache
* allocation. Clearing SCTLR.C would make all the data accesses
* strongly ordered and would not hit the cache.
*/
mrc p15, 0, r0, c1, c0, 0
bic r0, r0, #(1 << 2) @ Disable the C bit
mcr p15, 0, r0, c1, c0, 0
isb
/*
* Invalidate L1 data cache. Even though only invalidate is
* necessary exported flush API is used here. Doing clean
* on already clean cache would be almost NOP.
*/
ldr r1, kernel_flush
blx r1
/*
* The kernel doesn't interwork: v7_flush_dcache_all in particluar will
* always return in Thumb state when CONFIG_THUMB2_KERNEL is enabled.
* This sequence switches back to ARM. Note that .align may insert a
* nop: bx pc needs to be word-aligned in order to work.
*/
THUMB( .thumb )
THUMB( .align )
THUMB( bx pc )
THUMB( nop )
.arm
/* Data memory barrier and Data sync barrier */
dsb
dmb
/*
* ===================================
* == WFI instruction => Enter idle ==
* ===================================
*/
wfi @ wait for interrupt
/*
* ===================================
* == Resume path for non-OFF modes ==
* ===================================
*/
mrc p15, 0, r0, c1, c0, 0
tst r0, #(1 << 2) @ Check C bit enabled?
orreq r0, r0, #(1 << 2) @ Enable the C bit if cleared
mcreq p15, 0, r0, c1, c0, 0
isb
/*
* ===================================
* == Exit point from non-OFF modes ==
* ===================================
*/
ldmfd sp!, {r0-r12, pc} @ restore regs and return
.pool
.align 12
.text
.global sh7372_cpu_resume
sh7372_cpu_resume:
mov r1, #0
/*
* Invalidate all instruction caches to PoU
* and flush branch target cache
*/
mcr p15, 0, r1, c7, c5, 0
ldr r3, =SMFRAM
ldmia r3!, {r4-r6}
mov sp, r4 @ Restore sp
msr spsr_cxsf, r5 @ Restore spsr
mov lr, r6 @ Restore lr
ldmia r3!, {r4-r7}
mcr p15, 0, r4, c1, c0, 2 @ Coprocessor access Control Register
mcr p15, 0, r5, c2, c0, 0 @ TTBR0
mcr p15, 0, r6, c2, c0, 1 @ TTBR1
mcr p15, 0, r7, c2, c0, 2 @ TTBCR
ldmia r3!,{r4-r6}
mcr p15, 0, r4, c3, c0, 0 @ Domain access Control Register
mcr p15, 0, r5, c10, c2, 0 @ PRRR
mcr p15, 0, r6, c10, c2, 1 @ NMRR
ldmia r3!,{r4-r7}
mcr p15, 0, r4, c13, c0, 1 @ Context ID
mcr p15, 0, r5, c13, c0, 2 @ User r/w thread and process ID
mrc p15, 0, r6, c12, c0, 0 @ Secure or NS vector base address
msr cpsr, r7 @ store cpsr
/* Starting to enable MMU here */
mrc p15, 0, r7, c2, c0, 2 @ Read TTBRControl
/* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1 */
and r7, #0x7
cmp r7, #0x0
beq usettbr0
ttbr_error:
/*
* More work needs to be done to support N[0:2] value other than 0
* So looping here so that the error can be detected
*/
b ttbr_error
.align
cache_pred_disable_mask:
.word 0xFFFFE7FB
ttbrbit_mask:
.word 0xFFFFC000
table_index_mask:
.word 0xFFF00000
table_entry:
.word 0x00000C02
usettbr0:
mrc p15, 0, r2, c2, c0, 0
ldr r5, ttbrbit_mask
and r2, r5
mov r4, pc
ldr r5, table_index_mask
and r4, r5 @ r4 = 31 to 20 bits of pc
/* Extract the value to be written to table entry */
ldr r6, table_entry
/* r6 has the value to be written to table entry */
add r6, r6, r4
/* Getting the address of table entry to modify */
lsr r4, #18
/* r2 has the location which needs to be modified */
add r2, r4
ldr r4, [r2]
str r6, [r2] /* modify the table entry */
mov r7, r6
mov r5, r2
mov r6, r4
/* r5 = original page table address */
/* r6 = original page table data */
mov r0, #0
mcr p15, 0, r0, c7, c5, 4 @ Flush prefetch buffer
mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array
mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB
mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB
/*
* Restore control register. This enables the MMU.
* The caches and prediction are not enabled here, they
* will be enabled after restoring the MMU table entry.
*/
ldmia r3!, {r4}
stmia r3!, {r5} /* save original page table address */
stmia r3!, {r6} /* save original page table data */
stmia r3!, {r7} /* save modified page table data */
ldr r2, cache_pred_disable_mask
and r4, r2
mcr p15, 0, r4, c1, c0, 0
dsb
isb
ldr r0, =restoremmu_on
bx r0
/*
* ==============================
* == Exit point from OFF mode ==
* ==============================
*/
restoremmu_on:
ldmfd sp!, {r0-r12, pc} @ restore regs and return
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment